December 6

2000W Wind Grid Tie Inverter for 3phase AC Wind Turbine Generators LCD MPPT

2000W Wind Grid Tie Inverter for 3phase AC Wind Turbine Generators LCD MPPT

2000W Wind Grid Tie Inverter for 3phase AC Wind Turbine Generators LCD MPPT
2000W wind power grid tie inverter with LCD& du. Built-in rectifier for 3 phase AC wind turbine generator. This unit is the second generation wind power grid tie inverter, completely new design, new structure, the new design enables the inverter working more stable, much better output waveform, much better PF value, higher efficiency etc. This WAL type is integrate rectifier inside the inverter, it can directly connect to the three phase wind turbine, no need to connect AC to DC controller between the wind turbine and the inverter. Currently, we provide two type DC voltage range, 22-60vdc, for 24V three phase wind turbine, and 45-90vdc for 48v three phase wind turbine. (test point is at the output of the inside rectifier). Max input DC voltage. Peak power tracking voltage. 47.5-51.5 for 50hz, 59.3-60.5 for 60hz. Just for AC output. How to select a wind grid tie inverter? Max output power of the wind turbine. 500w-1000w wind turbines , suggest 1000w inverter. 1000w-2000w wind turbines , suggest 2000w turbine. 24v 36v 48v wind turbines , suggest 22-65v inverter. 48v 60v 72v 90V wind turbines , suggest 45-90v inverter. Some wind turbines has been built-in a regulator , the output is DC , please choose DC input type wind inverter. How to use a grid tie inverter with battery and wind turbine? If the user want to use a wind turbine to charge battery first , and output excess power to the grid , we suggest the battery function grid tie inverter(solar power GTI , battery function). The wind inverter can not work with battery well. What is the dump load controller/resistor? The dump load controller/resistor is used to protect the wind turbine and inverter. If the wind speed is too fast , the voltage will be high , it will work to reduce the wind turbines runing speed and voltage. WAL model of grid tie invereter connected with AC output type of wind turbine. Connecting two 1000G2-WAL with a max. Power is 2KW wind turbine. Wifi Port for MPPT 1000W/2000W NEW SUN Solar/Wind Grid Tie Inverter. NOTE : this WIFI port must be ordered with 2nd Generation Grid Tie Inverters together. NOTE : It will be built-in side the inverter. NOTE : this WIFI port must be used with 2nd Generation Grid Tie Inverters that are with latest program. 1x2000W Blue grid tie inverter. Include extra charges for remote area listed by Express companies. Russian buyers were required to fill in the full name; Brazilian buyers are required to leave CPF/CPNJ Number; Chilean buyers are required to leave RUT number. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! The item “2000W Wind Grid Tie Inverter for 3phase AC Wind Turbine Generators LCD MPPT” is in sale since Thursday, May 10, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “sunhome910″ and is located in Shanghai. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • Brand: Ecopower
  • MPN: Does Not Apply
  • Country/Region of Manufacture: China
  • Type: Grid Tie Inverter

2000W Wind Grid Tie Inverter for 3phase AC Wind Turbine Generators LCD MPPT
Category: 2000w | Comments Off
December 5

Solar Grid Tie inverter 1000W with Limiter MPPT Pure Sine Wave DC22-60V/45-90V

Solar Grid Tie inverter 1000W with Limiter MPPT Pure Sine Wave DC22-60V/45-90V
Solar Grid Tie inverter 1000W with Limiter MPPT Pure Sine Wave DC22-60V/45-90V
Solar Grid Tie inverter 1000W with Limiter MPPT Pure Sine Wave DC22-60V/45-90V
Solar Grid Tie inverter 1000W with Limiter MPPT Pure Sine Wave DC22-60V/45-90V
Solar Grid Tie inverter 1000W with Limiter MPPT Pure Sine Wave DC22-60V/45-90V
Solar Grid Tie inverter 1000W with Limiter MPPT Pure Sine Wave DC22-60V/45-90V
Solar Grid Tie inverter 1000W with Limiter MPPT Pure Sine Wave DC22-60V/45-90V
Solar Grid Tie inverter 1000W with Limiter MPPT Pure Sine Wave DC22-60V/45-90V
Solar Grid Tie inverter 1000W with Limiter MPPT Pure Sine Wave DC22-60V/45-90V
Solar Grid Tie inverter 1000W with Limiter MPPT Pure Sine Wave DC22-60V/45-90V
Solar Grid Tie inverter 1000W with Limiter MPPT Pure Sine Wave DC22-60V/45-90V
Solar Grid Tie inverter 1000W with Limiter MPPT Pure Sine Wave DC22-60V/45-90V

Solar Grid Tie inverter 1000W with Limiter MPPT Pure Sine Wave DC22-60V/45-90V
1000W Grid Tie inverter With built-in power limiter , MPPT pure sine wave on grid inverter DC22-60V/45-90V to AC110V/230V auto sense. New upgraded firmware Version 5.1 enable battery or solar limiter current and power model. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Why we produced the GTI-L — It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation GTIL. The first generation GTIL must be used with an additional limiter module, we also add an switch button to enable the inverter either can work at limit mode or at normal grid tie mode. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. Max input DC voltage. Peak power tracking voltage. 47.5-51.5 for 50hz; 59.3-60.5 for 60hz. Just for AC output. 20’C — +85’C. Settings Explainations on the LCD of the 2. The GTIL including various functions, all functions should configurate on the LCD setting page. Please see below explaination. Limit Mode:External limiter and Internal limiter are settable. Limit mode+External limiter both selected means work under external limiter mode. Limit mode+Internal limiter both selected means work under external limiter mode. LCD back light:Select it, Lcd will always on. Unselect it, Lcd will auto turn off after about 10s without any action on lcd button. Press any of the button to light lcd again. Remote Num:while using with wifi plug for monitoring, set by 1. While using with the WIFI-RTU(one rtu can monitoring multiple inverters), set monitored inverter numbers. Bat or solar limited current mode:This function is usable while using with battery. The setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level. Mppt function of the inverter will auto invalid when working under this setting. Set is 0.1V/step. Set is 0.1V/Step. The 22-65V type inverter will start up at 25V, and 45-90V type inverter will start up at 49.5V, after start, inverter can still work until 22v or 45v. Current sensor Orientation:Please check the current flow direction arrow on the sensor before use, make sure the connection is correct. Otherwise, inverter will not start up at limit mode. Negative power under AC voltage means power overflow to the grid. Positive means power come from the grid. Clamp Sensor with 2m cable—1pcs. My goal is to make sure you are happy and having the pleasant shopping with us. The item “Solar Grid Tie inverter 1000W with Limiter MPPT Pure Sine Wave DC22-60V/45-90V” is in sale since Sunday, August 5, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “brcu8037″ and is located in Wenzhou,Zhejiang. This item can be shipped worldwide.
  • Modified Item: No
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Warranty: 2 Years
  • AC Output: 110V 230V auto sense
  • Normal Voltage Range: 95-140V/185-265V
  • Frequency: 50HZ or 60HZ auto
  • Output Wave Form: Pure Sine Wave
  • Certificate: CE , ROHS
  • Type: Grid Tie Inverter
  • MPN: Does Not Apply
  • Brand: KRXNY
  • Non-Domestic Product: No

Solar Grid Tie inverter 1000W with Limiter MPPT Pure Sine Wave DC22-60V/45-90V
Category: solar | Comments Off
December 5

Solar Grid Tie inverter MPPT Pure Sine Wave 1000W with Limiter DC22-60V/45-90V

Solar Grid Tie inverter MPPT Pure Sine Wave 1000W with Limiter DC22-60V/45-90V
Solar Grid Tie inverter MPPT Pure Sine Wave 1000W with Limiter DC22-60V/45-90V
Solar Grid Tie inverter MPPT Pure Sine Wave 1000W with Limiter DC22-60V/45-90V
Solar Grid Tie inverter MPPT Pure Sine Wave 1000W with Limiter DC22-60V/45-90V
Solar Grid Tie inverter MPPT Pure Sine Wave 1000W with Limiter DC22-60V/45-90V
Solar Grid Tie inverter MPPT Pure Sine Wave 1000W with Limiter DC22-60V/45-90V
Solar Grid Tie inverter MPPT Pure Sine Wave 1000W with Limiter DC22-60V/45-90V
Solar Grid Tie inverter MPPT Pure Sine Wave 1000W with Limiter DC22-60V/45-90V

Solar Grid Tie inverter MPPT Pure Sine Wave 1000W with Limiter DC22-60V/45-90V
Solar Grid Tie inverter MPPT Pure Sine Wave 1000W with Limiter DC22-60V/45-90V. New upgraded firmware Version 5.1 enable battery or solar limiter current and power model. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Why we produced the GTI-L — It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation GTIL. The first generation GTIL must be used with an additional limiter module, we also add an switch button to enable the inverter either can work at limit mode or at normal grid tie mode. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. Max input DC voltage. Peak power tracking voltage. 47.5-51.5 for 50hz; 59.3-60.5 for 60hz. Just for AC output. 20’C — +85’C. Settings Explainations on the LCD of the 2. The GTIL including various functions, all functions should configurate on the LCD setting page. Please see below explaination. Limit Mode:External limiter and Internal limiter are settable. Limit mode+External limiter both selected means work under external limiter mode. Limit mode+Internal limiter both selected means work under external limiter mode. LCD back light:Select it, Lcd will always on. Unselect it, Lcd will auto turn off after about 10s without any action on lcd button. Press any of the button to light lcd again. Remote Num:while using with wifi plug for monitoring, set by 1. While using with the WIFI-RTU(one rtu can monitoring multiple inverters), set monitored inverter numbers. Bat or solar limited current mode:This function is usable while using with battery. The setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level. Mppt function of the inverter will auto invalid when working under this setting. Set is 0.1V/step. Set is 0.1V/Step. The 22-65V type inverter will start up at 25V, and 45-90V type inverter will start up at 49.5V, after start, inverter can still work until 22v or 45v. Current sensor Orientation:Please check the current flow direction arrow on the sensor before use, make sure the connection is correct. Otherwise, inverter will not start up at limit mode. Negative power under AC voltage means power overflow to the grid. Positive means power come from the grid. Clamp Sensor with 2m cable—1pcs. My goal is to make sure you are happy and having the pleasant shopping with us. The item “Solar Grid Tie inverter MPPT Pure Sine Wave 1000W with Limiter DC22-60V/45-90V” is in sale since Sunday, August 5, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “krpower” and is located in Wenzhou,Zhejiang. This item can be shipped worldwide.
  • Modified Item: No
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Frequency: 50HZ or 60HZ auto
  • Output Wave Form: Pure Sine Wave
  • Certificate: CE , ROHS
  • Warranty: 2 Years
  • AC Output: 110V 230V auto sense
  • Normal Voltage Range: 95-140V/185-265V
  • Type: Grid Tie Inverter
  • MPN: Does Not Apply
  • Brand: KRXNY
  • Non-Domestic Product: No

Solar Grid Tie inverter MPPT Pure Sine Wave 1000W with Limiter DC22-60V/45-90V
Category: solar | Comments Off
December 4

1000W On Grid Tie Inverter with Limiter for Solar DC 22-65V/45-90V AC110/220V

1000W On Grid Tie Inverter with Limiter for Solar DC 22-65V/45-90V AC110/220V
1000W On Grid Tie Inverter with Limiter for Solar DC 22-65V/45-90V AC110/220V
1000W On Grid Tie Inverter with Limiter for Solar DC 22-65V/45-90V AC110/220V
1000W On Grid Tie Inverter with Limiter for Solar DC 22-65V/45-90V AC110/220V
1000W On Grid Tie Inverter with Limiter for Solar DC 22-65V/45-90V AC110/220V
1000W On Grid Tie Inverter with Limiter for Solar DC 22-65V/45-90V AC110/220V
1000W On Grid Tie Inverter with Limiter for Solar DC 22-65V/45-90V AC110/220V
1000W On Grid Tie Inverter with Limiter for Solar DC 22-65V/45-90V AC110/220V
1000W On Grid Tie Inverter with Limiter for Solar DC 22-65V/45-90V AC110/220V
1000W On Grid Tie Inverter with Limiter for Solar DC 22-65V/45-90V AC110/220V
1000W On Grid Tie Inverter with Limiter for Solar DC 22-65V/45-90V AC110/220V
1000W On Grid Tie Inverter with Limiter for Solar DC 22-65V/45-90V AC110/220V

1000W On Grid Tie Inverter with Limiter for Solar DC 22-65V/45-90V AC110/220V
You may also like. 1000W On Grid Tie Inverter with Limiter for Solar DC 22-65V/45-90V AC110/220V. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Gereantion 1000w Standard Solar Power Grid Tie Inverter. DC 22V-65V or 45V-90V (Optional). AC 110V 120V 220V 230V 240V (auto selected). With Battery Discharge Function / Voltage Adjustable. Wi-Fi port (optional). Power Limiter function built-in. SGPV and Grid Tie Inverter. SGPV – small solar grid tie inverter and solar panels. The inverter can obtain the solar energy from solar panel, and tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. When the sun shines, the solar panels will produces DC voltage, and the grid tie inverter will change the DC voltage to AC voltage and puts out power to the home grid. The electric apparatus in the house will use power from the inverter first. The power meter will SLOW down. Advantage of the 2G grid tie inverter? The 2nd Generation grid tie inverter, new technical , Higher efficiency. Higher MPPT efficiency , Max 99%. Multiple intelligent protection to ensure safe use. Wide DC input voltage , suitable for all types solar panels. Easy to install and easy to operate. UL1741, IEEE1547, VDE4105 standards. Power Limiter function , Battery discharge function support. Pure sine wave form output , THD < 5%. Input DC Voltage Range. Peak power tracking voltage. AC Output Voltage Range. Dimensions (W x H x D). How to choose the inverter. The 22-65V model inverter will start up at 25V, after starting, the inverter can work in 22V-65V. Vmp 30v-60v Solar panels connected in Parallel suggested, for example : 4 pcs 200-260w (Vmp 31v solar panels in parallel). The 45-90V model inverter will start up at 49.5V, after starting, the inverter can work in 45V-90V. Vmp 50v-90v Solar panels in parallel suggested ; for Vmp 25V-45v solar panels , we suggest 2 panels in series , the total voltage will be 50V-90V , then connect 2 or more groups in parallel. For example : 2 pcs 200-260w (Vmp 31v) connected in series , 2 groups in parallel. About the limiter function. The Limiter function has been built-in. But, there is not limiter sensor/clamp with this product. The function is turned off. If customer want to use limiter function , please order limiter sensor/clamp in the future , or order a limiter model inverter. How to use the grid tie inverter? 1 unit inverter installation / more units inverters in parallel. The inverter AC output can be connected in the AC plug of grid in the house. LCD display and operation. Bat or solar limited current mode. This function is usable while using with battery. The setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level. MPPT function of the inverter will auto invalid when working under this setting. Set is 0.1V/step. Set is 0.1V/Step. Note : Limiter model must use limiter sensor/clamp , there is not limiter sensor and clamp with this model inverter. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then powe will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Optional Function : Wi-Fi port. We will message you if it happens. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. The item "1000W On Grid Tie Inverter with Limiter for Solar DC 22-65V/45-90V AC110/220V" is in sale since Tuesday, September 4, 2018. This item is in the category "Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters". The seller is "homegarden0722" and is located in Shenzhen. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • Brand: SUN
  • MPN: SUN-1000G2-LCD
  • Country/Region of Manufacture: China
  • Input Voltage: 22v-60v or 45v-90v Optional
  • Output Voltage: 100V 110V 120V 220V 230V 240V auto
  • Output Frequency: 45-65Hz
  • Standby Power Consumption: <0.5w
  • Total Harmonic Distortion: <5%
  • Peak Inverter Efficiency: 92%
  • MPPT Efficiency: 99%
  • Power Factor: 0.99
  • Output Wave Form: Pure Sine Wave
  • Weight: 6kg
  • Dimensions (W x H x D): 322x196x88 mm
  • Featured Refinements: MPPT
  • Bundle Listing: No

1000W On Grid Tie Inverter with Limiter for Solar DC 22-65V/45-90V AC110/220V
Category: 1000w | Comments Off
December 3

600W Waterproof Grid Tie Inverter DC22-50V For 36V Solar Panel Micro Inverter

600W Waterproof Grid Tie Inverter DC22-50V For 36V Solar Panel Micro Inverter
600W Waterproof Grid Tie Inverter DC22-50V For 36V Solar Panel Micro Inverter
600W Waterproof Grid Tie Inverter DC22-50V For 36V Solar Panel Micro Inverter
600W Waterproof Grid Tie Inverter DC22-50V For 36V Solar Panel Micro Inverter
600W Waterproof Grid Tie Inverter DC22-50V For 36V Solar Panel Micro Inverter

600W Waterproof Grid Tie Inverter DC22-50V For 36V Solar Panel Micro Inverter
600W Waterproof Grid Tie Inverter DC22-50V For 36V Solar Panel Micro Inverter. 600W Waterproof Grid Tie inverter, Pure Sine Wave Inverter. DC22-50V to AC110V or 220V , 50HZ/60HZ Auto. Recommended using solar panels2X250300W, Voc:36-47V. Voc(of a solar panel) must be in the 36-50V range to ensure the good output efficiency. WGTI-600W grid tie micro inverter using IP65 waterproof streamline design, Can effectively prevent rainwater on the surface erosion, Built-in high-performance Maximum Power Point Tracking(MPPT)Function, Better able to track changes in the solar luminosity and control different output power, Effectively capture and collect sunlight. Recommended using solar panels. 2300W, open circuit voltage 36-50VOC. Solar panel open circuit voltage range. Peak power tracking voltage. Maximum input operating current. Maximum units per branch circuit. Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods. (Only for Business Express). Feedback is very important to us. Please do not give us any bad feedback. If you can do as we say, we will be very grateful. Please give us the opportunity to resolve any problem. The item “600W Waterproof Grid Tie Inverter DC22-50V For 36V Solar Panel Micro Inverter” is in sale since Wednesday, November 7, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “maihuiyan” and is located in shenzhen. This item can be shipped worldwide.
  • Brand: Y&H
  • Type: Grid Tie Inverter
  • Model: 600W Waterproof Grid Tie Inverter
  • Voltage: 36V
  • Custom Bundle: Yes
  • MPN: Does Not Apply
  • Country/Region of Manufacture: China
  • DC Input Voltage: 22V-50VDC
  • Recommended using solar panels: 2*300W,open circuit voltage 36-50VOC
  • Waterproof Rating: IP65
  • Rated Frequency Range: 47-52.5Hz/57-62.5Hz
  • Maximum input power: 600Watt

600W Waterproof Grid Tie Inverter DC22-50V For 36V Solar Panel Micro Inverter
Category: 600w | Comments Off
December 3

Fronius IG2000 2KW Grid Tie Solar Inverter New In The Box Warranty 2000 Watts

Fronius IG2000 2KW Grid Tie Solar Inverter New In The Box Warranty 2000 Watts
Fronius IG2000 2KW Grid Tie Solar Inverter New In The Box Warranty 2000 Watts
Fronius IG2000 2KW Grid Tie Solar Inverter New In The Box Warranty 2000 Watts
Fronius IG2000 2KW Grid Tie Solar Inverter New In The Box Warranty 2000 Watts

Fronius IG2000 2KW Grid Tie Solar Inverter New In The Box Warranty 2000 Watts
This listing is for 1 Fronius IG2000 Inverter. We have a couple of these 2000W Fronius inverters that have been stored in our warehosue. Both are in their original boxes but box may be damages and unit may show markes on the case due to being moved around. Fronius IG 2000 Inverter The IG 2000 is perfect for smaller applications, such as residential systems. This inverter offers high efficiency, precision MPP-tracking, and intelligent thermal management, all of which deliver high quality energy output from grid-tied photovoltaic systems. Rely on the IG 2000 for your solar power needs! DC Input Voltage: 500V. DC Voltage Range: 150V – 450V Max. Usable DC Input Current: 13.6A Max. Output Power: 2000W Nominal. AC Output Voltage: 240V Max. AC Current: 8.35A. Operating Frequency Range: 59.3 Hz – 60.5 Hz. Plug-and-Play Expansion slots in the inverter allow you to easily upgrade the inverter with data communication options. The item “Fronius IG2000 2KW Grid Tie Solar Inverter New In The Box Warranty 2000 Watts” is in sale since Monday, November 26, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “mlsolar” and is located in Campbell, California. This item can be shipped to United States.
  • Model: IG2000
  • Country/Region of Manufacture: Unknown
  • MPN: IG2000
  • Brand: Fronius
  • Voltage: 240

Fronius IG2000 2KW Grid Tie Solar Inverter New In The Box Warranty 2000 Watts
Category: fronius | Comments Off
December 2

Schneider Electric 5kW SunEzy 600E SinglePhase Grid Grid Tie Inverter 230VAC50Hz

Schneider Electric 5kW SunEzy 600E SinglePhase Grid Grid Tie Inverter 230VAC50Hz

Schneider Electric 5kW SunEzy 600E SinglePhase Grid Grid Tie Inverter 230VAC50Hz
Main Range of product SunEzy Device short name SunEzy 600E Product or component type Inverter Efficiency > 94.5 % European > 96 % maximum Number of MPPT 3 Photovoltaic power 5400 Wp Voltage range MPP input : 200…700 V DC Input voltage 150 V DC for feed-in 750 V DC for open circuit Maximum input current 3 x 8.5 A DC AC output power Output nominal : 4600 W Output maximum : 5100 W Output voltage 230 V AC 50 Hz Maximum output current 25 A Product certifications VDE. Complementary Display type Backlit LCD Enclosure material Metal Power consumption 9 W Standby consumption < 0.5 W Type of connector Multicontact MC4 (1 pair per MPPT) DC Communication port support Option : SunEzy RS485 Standard : RS 232 IP degree of protection IP65 Width 430 mm Height 530 mm Depth 130 mm Product weight 27 kg. Environment Standards CE EN 50178 EN 61000-3-X/-6-X EU EMC Directive EU LV Directive EU RoHS Directive VDE-GS VDE 0126-1-1 Ambient air temperature for operation -20...55 °C Relative humidity 0...95 % Noise level < 35 dB. The item "Schneider Electric 5kW SunEzy 600E SinglePhase Grid Grid Tie Inverter 230VAC50Hz" is in sale since Tuesday, November 20, 2018. This item is in the category "Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters". The seller is "solarliquidators" and is located in Miami, Florida. This item can be shipped to United States.
  • Brand: Schneider Electric
  • Model: PVSNV1600E

Schneider Electric 5kW SunEzy 600E SinglePhase Grid Grid Tie Inverter 230VAC50Hz
Category: schneider | Comments Off
December 2

Xantrex Solar Inverter, Grid-tie, GT 2.8 kW AC 208/240V

Xantrex Solar Inverter, Grid-tie, GT 2.8 kW AC 208/240V
Xantrex Solar Inverter, Grid-tie, GT 2.8 kW AC 208/240V
Xantrex Solar Inverter, Grid-tie, GT 2.8 kW AC 208/240V

Xantrex Solar Inverter, Grid-tie, GT 2.8 kW AC 208/240V
Came back from a upgrade project. Was mounted indoors and never got hot. Total KWH produced so far 16241 which is VERY low for a unit like this. It should provide years more service , great deal if you need to replace a defective GT. The item “Xantrex Solar Inverter, Grid-tie, GT 2.8 kW AC 208/240V” is in sale since Tuesday, October 16, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “compuhans” and is located in Agoura Hills, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Philippines.
  • Model: GT 2.8
  • MPN: Does Not Apply
  • Brand: Xantrex

Xantrex Solar Inverter, Grid-tie, GT 2.8 kW AC 208/240V
Category: xantrex | Comments Off
December 1

Power One/ABB Aurora PV Grid Tie Inverter PVI-6000-US-A Untested, Parts Only

Power One/ABB Aurora PV Grid Tie Inverter PVI-6000-US-A Untested, Parts Only
Power One/ABB Aurora PV Grid Tie Inverter PVI-6000-US-A Untested, Parts Only
Power One/ABB Aurora PV Grid Tie Inverter PVI-6000-US-A Untested, Parts Only
Power One/ABB Aurora PV Grid Tie Inverter PVI-6000-US-A Untested, Parts Only
Power One/ABB Aurora PV Grid Tie Inverter PVI-6000-US-A Untested, Parts Only
Power One/ABB Aurora PV Grid Tie Inverter PVI-6000-US-A Untested, Parts Only
Power One/ABB Aurora PV Grid Tie Inverter PVI-6000-US-A Untested, Parts Only

Power One/ABB Aurora PV Grid Tie Inverter PVI-6000-US-A Untested, Parts Only
Ziggy’s Zoo – Where everyone is treated like family. Power One/ABB Aurora PV Grid Tie Inverter PVI-6000-US-A – Untested, Parts Only. We are currently clearing out the inventory of a solar installer. Check our inventory for other great deals. Ziggys Zoo is a small family owned business. We focus on providing you with high quality items at reasonable prices. Check out our Zoo (our store) for a wide variety of items. _gsrx_vers_841 GS 7.0.16 (841). The item “Power One/ABB Aurora PV Grid Tie Inverter PVI-6000-US-A Untested, Parts Only” is in sale since Saturday, October 27, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “ziggyszoo” and is located in Clinton, Connecticut. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Philippines, Bahamas.
  • Brand: ABB/Power One
  • Model: PVI-6000-US-A
  • MPN: Does Not Apply
  • Type: Grid Tie Inverter
  • Custom Bundle: No
  • Modified Item: No
  • Non-Domestic Product: No
  • Country/Region of Manufacture: Unknown

Power One/ABB Aurora PV Grid Tie Inverter PVI-6000-US-A Untested, Parts Only
Category: power | Comments Off