December
4
1000W On Grid Tie Inverter with Limiter for Solar DC 22-65V/45-90V AC110/220V
You may also like. 1000W On Grid Tie Inverter with Limiter for Solar DC 22-65V/45-90V AC110/220V. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Gereantion 1000w Standard Solar Power Grid Tie Inverter. DC 22V-65V or 45V-90V (Optional). AC 110V 120V 220V 230V 240V (auto selected). With Battery Discharge Function / Voltage Adjustable. Wi-Fi port (optional). Power Limiter function built-in. SGPV and Grid Tie Inverter. SGPV – small solar grid tie inverter and solar panels. The inverter can obtain the solar energy from solar panel, and tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. When the sun shines, the solar panels will produces DC voltage, and the grid tie inverter will change the DC voltage to AC voltage and puts out power to the home grid. The electric apparatus in the house will use power from the inverter first. The power meter will SLOW down. Advantage of the 2G grid tie inverter? The 2nd Generation grid tie inverter, new technical , Higher efficiency. Higher MPPT efficiency , Max 99%. Multiple intelligent protection to ensure safe use. Wide DC input voltage , suitable for all types solar panels. Easy to install and easy to operate. UL1741, IEEE1547, VDE4105 standards. Power Limiter function , Battery discharge function support. Pure sine wave form output , THD < 5%. Input DC Voltage Range. Peak power tracking voltage. AC Output Voltage Range. Dimensions (W x H x D). How to choose the inverter. The 22-65V model inverter will start up at 25V, after starting, the inverter can work in 22V-65V. Vmp 30v-60v Solar panels connected in Parallel suggested, for example : 4 pcs 200-260w (Vmp 31v solar panels in parallel). The 45-90V model inverter will start up at 49.5V, after starting, the inverter can work in 45V-90V. Vmp 50v-90v Solar panels in parallel suggested ; for Vmp 25V-45v solar panels , we suggest 2 panels in series , the total voltage will be 50V-90V , then connect 2 or more groups in parallel. For example : 2 pcs 200-260w (Vmp 31v) connected in series , 2 groups in parallel. About the limiter function. The Limiter function has been built-in. But, there is not limiter sensor/clamp with this product. The function is turned off. If customer want to use limiter function , please order limiter sensor/clamp in the future , or order a limiter model inverter. How to use the grid tie inverter? 1 unit inverter installation / more units inverters in parallel. The inverter AC output can be connected in the AC plug of grid in the house. LCD display and operation. Bat or solar limited current mode. This function is usable while using with battery. The setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level. MPPT function of the inverter will auto invalid when working under this setting. Set is 0.1V/step. Set is 0.1V/Step. Note : Limiter model must use limiter sensor/clamp , there is not limiter sensor and clamp with this model inverter. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then powe will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Optional Function : Wi-Fi port. We will message you if it happens. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. The item "1000W On Grid Tie Inverter with Limiter for Solar DC 22-65V/45-90V AC110/220V" is in sale since Tuesday, September 4, 2018. This item is in the category "Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters". The seller is "homegarden0722" and is located in Shenzhen. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- Brand: SUN
- MPN: SUN-1000G2-LCD
- Country/Region of Manufacture: China
- Input Voltage: 22v-60v or 45v-90v Optional
- Output Voltage: 100V 110V 120V 220V 230V 240V auto
- Output Frequency: 45-65Hz
- Standby Power Consumption: <0.5w
- Total Harmonic Distortion: <5%
- Peak Inverter Efficiency: 92%
- MPPT Efficiency: 99%
- Power Factor: 0.99
- Output Wave Form: Pure Sine Wave
- Weight: 6kg
- Dimensions (W x H x D): 322x196x88 mm
- Featured Refinements: MPPT
- Bundle Listing: No