Grid Power II 400W Inverter +. 100W Polycrystalline Solar Panel + Z Mounting 1 Set Grid-Tie Starter Kit. What is a Micro Grid-Tie Inverter? First, we should know what a Grid-Tie Inverter is. A Grid-Tie Inverter is a device that that can transform DC electricity (ie: Solar Panels, Wind Turbine, Battery Storage) into AC power that can be directly injected into your utility’s electricity network (the power grid). As of today, most inverters available in the market are in the high output (1000W 5000W) category. Their prices ranges in the thousand’s range and it is just too much of an up front cost for anyone interested in green energy generation. In addition, because of the high output, a certified electrician will need to be hired to install the equipments and connect the cables. Ever since we invented the first generation of the Micro Grid Tie Inverters, connecting to the grid has never been this easy and affordable. This is the perfect start up solution for anyone interested in green energy generation as it is affordable and maintenance free. In addition, our inverters are stackable ; meaning multiple unit of these devices can be connected in parallel to generate a higher output. It is up to us. Up to this generation. To lead mankind into a greener future. Non- Reusable Power being consumed today. Reusable Power being generated for a better tomorrow and a brighter future. What’s New in the 2nd Generation? So you ask, What’s new in this second generation? Well, there are number of upgrades in performance, safety and display that are not available in the first generation or other inverters in the market. We will use our Enviro-Techs SSI-200W first generation inverter as the base model for comparison. Here are the high lights: Performance. 152 x 143 x 57 mm. 163 x 154 x 57 mm. 400W, 60% enhanced in Power Output – 38.5% better in Space Utilization. 51% better in Weight Reduction with. New Model: GP2-400 Second Generation Normal Operation. AC Disconnected / Fault. Unique and intuitive display design – LED cycling in circular formation – Represent electric meter spinning backward and power is being output to the grid – Smooth motion. New Model: GP2-400 (30A External Fuse). External 30A Fuse for easy maintenance -Utilizing low resist DC input circuit to increase efficiency. Reverse Polarity protection – Buzzer will alarm when fuse need to be replaced – Reduce internal temperature. Automatic AC Voltage & Wider Voltage Range for DC input. New Model: GP2-400 (Automatic Voltage Switch). Automatically Switch between 110V 220V AC – Compatible with grids from ANY countries. No more manual switch – Avoid unit being damaged because of human mistakes – Cleaner User Interface – Wider DC Input Voltage Range 10.8V 28V – Allow MORE types of power source to be connected (ie: Air-X, 12V Battery, and etc). Feature: – Grid-Tied – sell green power directly back to the grid at a premium rate (depends on your location) – Maximum Power Point Tracking (MPPT) – optimize power output – Plug and Play Design, simply plug into an outlet (GFI), no hard-wiring – 60% enhanced in power output compare to first generation inverters – 38% better in. And 51% better in. With higher quality parts – Unique and intuitive LED display design to reflect power output rate – External 30A Fuse for easy maintenance – Automatic 110V – 220V AC voltage switch, NO MORE manual hassle – Wider DC Input Voltage Range, from 10.8V 28V compare to 1st generation’s 14V 28V – Allow MORE types of power source to be connected ie: Air-X, 12V battery, and etc. Aluminum enclosure will act as heat sink to help dissipate heat – Stackable (connect in parallel for higher output) – Island protection: Inverter will shut down during black outs. Simple and safe installation – Reverse polarity protection – Generates pure Sine Wave – Constant Power Output – Low distortion output on all ranges – Allow different Power factor from loads – Does not require rewiring of existing electronics – Compact and light weight design Installation. Figure 1: AC Power. Figure 2: DC Input. Install in a low humidity and well-ventilated area. Remove all flammable objects. Connect the Solar Panel, Battery or Wind Turbine’s DC supply cables to the DC input terminal of the inverter as shown in Figure 2. Wind Turbine installations will require respective charge controllers and dump loads. Connect the inverter to a wall socket with the supplied AC Power Cord as shown in Figure 1. Pay close attention to the polarity of your DC input. Connecting incorrectly might blow the fuse. In such case the inverter will make a buzz sound whenever power is connected and the fuse will need to be replaced. Electrical Specifications – Output. Maximum AC Output Power. 100 260V Auto Switching. Total Harmonic Distortion (THD). Yes, inverter shuts down during black out. Electrical Specifications – Input. DC Input Voltage (Solar & Wind). 10.8V – 28V. Unlimited as long as it doesn’t exceed main circuit amperage limit. 20’C – 65’C. 1.27kg 2.65lb. Dimension (L x W x H). 16.3 x 15.4 x 5.7 cm 6.3″ x 6.10″ x 2.25. Wall Mount at base. Convection cooled with fan. 1 Red and 6 Green LED. 100W Polycrystalline Solar Power Panel. Short Circuit Current (Isc). ±3% (97.0W – 103.0W). 40’C to 85’C. Temperature coefficient of Isc. 0.065 ±0.015 %/’C. Temperature coefficient of Voc. 160 ±10 mV/’C. Temperature coefficient of power. 0.5 ±0.05 %/’C. Installed to box (about 0.8m). 1181 x 541 x 35mm 46.5 x 21.30 x 1.38 inches. 7.84kg, 17.28lbs. Solar Panel Z Mounting Bracket Set (1 Set). To install no flat surfaces, secure brackets to the back of the panel’s frame. The panel will have 1 3/8 inches of elevation / surface clearance to dissipate heat with free flow of air. Then secure the elevated panel to the surface with wood screws. On Rails / Other Mountings. Act as clamps to secure panels to our GreenergyStar Mountings. Can be installed to your Rooftop (Sample Picture). Solar panel generates free energy for many general household appliance. These solar panels also specially designed for use in sailing boats, green houses, cars, radios, recreational vehicles, portable televisions, warning lights, flash lights, garden lights, house light, garage lights and ventilators for rooms and cars. They can also be installed into a grid-tie system. 36 pieces silicon solar cells – Enclosed with epoxy and high-quality resin material – Rain proof, rust proof and corrosive proof, protects against wind, rain, salt air and solar radiation. Weather resistant, charge batteries in dry/wet condition. What are included: – One GreenergyStar GP2-400 Hybrid Grid-Tied Inverter – One spare 30A fuse – One 1.5m North America Standard AC Cable – Instruction Manual – One 100W Polycrystalline Solar Panel. Adjustable Universal Pole Mount Fence Pole, Aluminum Angle Rail NOT Included in this listing. Improper installation, accident, misuse. Any unauthorized disassembly, repair, or modification. All pictures and descriptions are subjected to change without notice. We are not responsible for any inadvertent errors. For Address that UPS determined to be outside of their normal service area, they will charge an additional “extended area surcharge”. Items that are used/ damaged/ deformed or altered in any ways will not be accepted. Spams and mass e-mailing will be deleted without slightest glance. E-mails with virus or anything subjected to hacking are automatically deleted. The item “400 Watt GRID TIE INVERTER + 12 V 100 Watt 100W POLY SOLAR PANEL + Z Mounting” is in sale since Saturday, September 03, 2011. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “hi_iq” and is located in Vancouver, British Columbia. This item can be shipped worldwide.

• Brand: GreenergyStar
• Energy Type: Solar
• Product Type: Inverter
• MPN: Does Not Apply