500 / 600W pure sine wave grid tie inverter for 10.8-30/22-60V DC/AC wind turbines. 500W 600W Wind grid tie inverter for single phase DC(WDL) or 3 phase AC(WAL) output wind turbine. 10.8-30V/22-60V with dump load resisitor. LCD on inverter is optional. The grid-tie inverter can transfer wind energy from wind generators directly into the home grid using no. It can be connected to any outlet (conventional network) in the home. Controls the phase and the frequency and voltage of the power generated by the wind generator. A pure sine-wave and matches that of the grid. This model grid-tie has build in bridge rectifier and dump load controller, it can maintain the rotating speed of. The wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid. It also has a high voltage protection function, when the wind is too big. And the dump load controlling. System cant keep the output voltage from the wind turbine, the controller will disconnect itself. From the wind turbine. So it is very safe to be used. There are 5 terminals on the left side of the inverter, 3 red terminals will be connected to the three phase output. Wind turbine, and 2 black terminals will be connected to dump load resistors. There are 4 LED indicators, 3 green indicators and 1 red indicator, 3 green LED indicators will start to cycle from left to. Right when the grid and AC input supply is detected. This indicates the inverter is operating under normal condition. Rate of the cycling is according to how much power is being output from the wind turbine. The bigger the output power is. The faster the rate is. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, this is called. LCD display Function: (only available for thoese Models “-LCD”). On the LCD Panel of the inverter, there is one AC output socket, that will connect the AC output cable to. LCD display will display the grid AC voltage, current , active power and electric energy that combined to the energy. Electric parameters measurement function (voltage, current and active power, electric energy). Running time function (record load cumulative working hours). Power down data save function (save the number of kWh, operation time). Large screen LCD display (display voltage, current, power, active power, cumulative running time) Key Function. UP: Short press will display power, electricity, current and voltage in anti-sequence. DOWN: Short press will display power, electricity, current and voltage in sequence. BACK LIGHT: Short press will open or close backlight. Normal AC Output Power. Maximum AC Output Power. AC Output Frequency Range. Total Harmonic Distortion(THD). DC Input Voltage Range. (the test point is at the output of the rectifier). 10.8v30v / 22V60V. Have given more than 3 negative or netural feedbacks during past 60days. Have received 3 or more negativeor netural feedback during past 60days. Have opened dispute twice in past 60days. We believe that all problems could be fixed by communication. Between buyers and sellers as long as both of us are honest and understanding. The item “500 600W pure sine wave grid tie inverter for 10.8-30/22-60V DC/AC wind turbines” is in sale since Wednesday, June 21, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “sunhome910″ and is located in , . This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia.

• Brand: Ecopower
• MPN: Does Not Apply
• Country/Region of Manufacture: China