1200W Grid tie power inverter DC 14V-24V to AC 110V + LCD meter L, MPPT for solar

1200W Grid tie power inverter. DC 14V-24V to AC 110V. With 3.5 LCD meter. For solar panel 12V system (best solar panel working voltage 18V). AC Output watt :0 Watt (Max display power 15KWcan display running power less than 1W). AC Output Volt : 0 volt (Max display volt 270V). AC Output Amp : 0 Amp (Max display amp 55A). Total Operation time :0-60000 hoursOperation time: 059 minutes to 24 hours to 2500 days. Electricity consumption: 01000000 kwh. Total operation time , electricity consumption and electricity cost can clear. Can set up power , the meter will alarm when reach reserve power. Can set up the cost. Refresh rate: one time 0.5 seconds. Whats new of this version? We separated the positions of the Red and Black DC input terminals. This provides for easier connection and makes an accidental short circuit much less likely. There are 2 ball type fans for greater air flow. The CPU lifetime is extended by 5 times the old version’s. PCB board: last version used SMT parts. These are easily dislodged by impacts or thermal expansion. The new version has 2 groups of capacitors, total 12 pieces. The low impedance filter is more efficient, running 27. Cooler than old version. The old version used a current and voltage control IC that had instabilities. The new version uses a new microchip from the USA. It is very stable and the reaction speed is 10 times faster, 100 times more precise. Double protection circuit for AC when there is over voltage, an island reaction, or a voltage spike. This will protect the inverter quickly if there is instability in line power. For the old version, when switch off the inverter, vestigial current and voltage in the DC side could damage the AC mosfets. In the new version, when you turn off it, it will turn off both AC and DC sides and cut off the IC signal. This will prevent any damage to the mosfets. When input power is 600w, the efficiency can reach to 90%, so the fan does not need to run offend. The high efficiency keeps the insides cool and can utilize a greater percentage of your solar power. When input power reach 1200w , the efficiency will stay at or above 87.5%. The new version has only 1 bi-colored light: low voltage: the red light flashes and the inverter will not function. High voltage: the green light always on and the inverter will not function. Normal situation: The led light will be green color flashed; led light will flash fast when power is strong. PSWGT-1200-14-24-110 + LCD meter. DC 14-24 Volt (solar panel). No Load current Draw. 55 C ± 5. Dimensions (L x W x H /cm). 43 22 8 CM. The inverter are designed for solar panels energy directly , no need battery! For battery, 24V battery for DC 14V-24V inverter; 36V for DC 28V-48V inverter, but please do NOT hook inverter with battery banks for a long time , it will burn the parts of inverter over a period of time. If you want to connect with wind turbine, need connect with a dump load controller, 12v controller for DC 14V-24V inverter; 24V controller for DC 28V-48V inverter; 36V controller for DC 50V-100V inverter. Sometimes, if you are using some heaving appliance like motor, engine, cause the voltage up down very fast, in this moment, big amp will come into the grid inverter, easy to cause the ac mos burned, so surge protector will cut down by itself to protect the grid inverter. You may have experience, when meet the big lightning, the power source of the home appliance may damage, same reason, will also cause the inverter damage, in this moment the lightning protection can release thousand voltages to protect the inverter not damage. High speed AC fuses. Now we put ac fuse outside, each inverter will come our special ac fuse, this will be broken 1 mini/sec, to make sure high voltage spike come in! Is designed for small solar panel & wind energy market, it’s suitable for family energy system. This inverter can directly use solar panel, wind charger through inverter to home grid. Easy to installation, just need solar panel, grid tie inverter, then directly can put into home grid. The inverter can be connected to any outlet in the home providing line power. The inverter IC will monitors the voltage, frequency and phase of the home grid, then produce a pure sine wave phase locked to the grid. The voltage will be just enough higher than the grid’s to feed power into the grid, Then using our current controlled PWM we control the output power to the grid. The inverter will put out power when the home grid is on. The inverter will stop feeding power into the grid when the grid is down, for safety and as required by law. Why should you use a grid tie inverter? When you use power from solar panels to supply the inverter, your home power. Meter will run more slowly(if you are using other electric appliances), or your. Home power meter will run backward(if you are not use any appliances). Why should you use a Power Jack grid tie inverter. In traditional grid tie inverters, the solar panels are connect in series so if one solar panel did not work or had poor efficiency or had a blown bypass diode, then the whole system is affected. With Power Jack inverters, you can use all panels in parallel so if one is not working properly, you only lose the output from that one panel. You can also run several Power Jack inverters parallel instead of having one large expensive unit. If you have just one expensive inverter and it fails you produce no power. If you have several smaller units and one fails you still produce power. Each inverter has it’s own MPPT function so you can extract the maximum power from all of your solar panels. When the dc charge function is normal, the inverter supplies power. If there are no dc sources (like at night or a cloudy or rainy day), the inverter will stop attempting to supply power and shut itself off from the power grid to protect itself and lengthen its lifetime. For DC 14V-24V inverter. For DC 28V-48V inverter. For DC 50V-88V inverter. For DC 102V-158V inverter. 11.5V – 13.5V. Orange light on, fan keep working, but inverter stop working. Green flash faster and more powerful output. Manufacture defects or workmanship, use appropriately, surface of item do not scratch. Manufacture defects or workmanship excludes damage caused by inappropriately used such as improper installation, accident, misuse, abuse, improper storage, or any unauthorized disassembly, repair, or modification. My solar panels are 210W 5 pcs, should I use 5 panels on one inverter or 4 panels. I live in the USA and we use 110V or 220V at 60 cycles. Should I use 1200W grid tie power inverter DC 14V-24V to AC 220V with LCD power meter for solar or 1200W grid tie inverter DC 28V-48V to AC 110V with LCD meter for my solar panels? Should I run them in set of two and double the voltage to 57.7? I like to set it up where I can get the most out of the inverters and the panels, your comments will be highly appreciated. You can use our 1200W grid tie power inverter DC 28V-48V TO AC 220V 60HZ due to below reasons. Your solar panels no load voltage are 35V, and 28V after loading, then the above DC range is just fit it. You can use 5 pcs solar panel and connect them in parallel(DC voltage will be 28V). Then connect them with 1 unit 1200W grid tie power inverter. Regarding use AC 220V system inverter, most home main AC power is 220V. In United States, then separate to 110V(sockets on wall), so you can connect the inverter to home main power (220V) directly. It is ok to use AC 110V inverter, just plug into any home AC 110V socket, but might lose 5-10% power. Q: how to connect Power Jack grid tie inverter? A: inverters DC side connect with solar panels, then the inverter’s plug just plug into home AC socket, and turn on inverter to start work. It is easy to use and no need to add controller. Q: Can solar panels can be hook in series or in parallel? A: solar panels can be hook in series or in parallel, if solar panels are in same voltage, they can be hook in series or in parallel. But if solar panels not in same voltage, they only can be hook in series, can not hook in parallel. Q: Can your grid tie power inverter can be hook together? A: yes, our grid tie power inverter can be connect in parallel, but must be same version. The item “1200W Grid tie power inverter DC 14V-24V to AC 110V + LCD meter L, MPPT for solar” is in sale since Thursday, February 18, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “6apex_2012″ and is located in warehouse. This item can be shipped worldwide.

Brand: POWER JACK
Model: 1200w
MPN: does not apply
Country/Region of Manufacture: China

Category: 1200w | Comments Off

February 18

2 IN 1 on/off 1200W Grid tie power inverter DC 28V-48V to AC 110V, LCD, MPPT, solar

2 in 1 on/off. 1200W Grid tie power inverter. DC 28V-48V to AC 110V. With 3.5 LCD meter. For solar panel 24V system (best solar panel working voltage 36V). Some users are using off grid system, means put solar battery to your battery bank, then take the power to using it, this is a good idea, however, what happened if your battery bank is full charged? Everybody already knows that we need using green energy to protect the earth, but how to save more green energy? Our new item 2 in 1 on/off grid inverter, this will let your green power to battery first, when battery is full charged, the smart inverter will auto switch to on grid mode, that’s 27.5V, at this moment, your battery already 80% full (as some battery is hard to get more than 80%, so no need to waste power to charge your battery), the inverter will switch to on grid mode. When the batterys voltage down to 26.5V, inverter will switch back to off grid mode. This is including 2 pcs 3.5 LCD big display, one is showing your solar panel & battery situations. SOLAR OFF/ BTY ON (this page will clear show you the solar connecting situations) B. SOLAR ON/ BTY ON can clear tell you the solar is correct to connect & battery is on charging. SOLAR PANEL: WATT : (will show you how many solar panel coming in) VOLTAGE: (will show you the voltage for your solar panel, laoding voltage) AMP : (will show you how many amp coming into the battery) D. Battery: VOLTAGE : (will show you battery voltage) Capacity : (this you need enter your battery size by your self) Charge tme/F : charge time for full, tell you how long your battery can be full E. SET BTY: setting your battery size SET ETC: setting electricity bill SET DEL: delete all your total energy & cost. Your solar panel is over voltage H. Your battery is low voltage 2. This inverter also include 1200w 50A/24V solar controller inside the inverter. CAHRGER CURRENT: 50A INPUT VOLTAGE: 28V-48V (For solar panel no load) on grid voltage auto switch: over 27.5V (for your battery) off grid voltage auto switch: under 26.5V (for your battery) low battery voltage shut down: 21.5V (for DC output) auto turn on voltage : 24V (for DC output). Whats new of this version? We separated the positions of the Red and Black DC input terminals. This provides for easier connection and makes an accidental short circuit much less likely. There are 2 ball type fans for greater air flow. The CPU lifetime is extended by 5 times the old version’s. PCB board: last version used SMT parts. These are easily dislodged by impacts or thermal expansion. The new version has 2 groups of capacitors, total 12 pieces. The low impedance filter is more efficient, running 27. Cooler than old version. The old version used a current and voltage control IC that had instabilities. The new version uses a new microchip from the USA. It is very stable and the reaction speed is 10 times faster, 100 times more precise. Double protection circuit for AC when there is over voltage, an island reaction, or a voltage spike. This will protect the inverter quickly if there is instability in line power. For the old version, when switch off the inverter, vestigial current and voltage in the DC side could damage the AC mosfets. In the new version, when you turn off it, it will turn off both AC and DC sides and cut off the IC signal. This will prevent any damage to the mosfets. When input power is 600w, the efficiency can reach to 90%, so the fan does not need to run offend. The high efficiency keeps the insides cool and can utilize a greater percentage of your solar power. When input power reach 1200w , the efficiency will stay at or above 87.5%. The new version has only 1 bi-colored light: low voltage: the red light flashes and the inverter will not function. High voltage: the green light always on and the inverter will not function. Normal situation: The led light will be green color flashed; led light will flash fast when power is strong. 2 in 1PSWGT-1200-28-48-110 + LCD meter. DC 28-48 Volt (solar panel). No Load current Draw. 55 C ± 5. Dimensions (L x W x H /cm). 43 22 8 CM. The inverter are designed for solar panels energy directly , no need battery! For battery, 24V battery for DC 14V-24V inverter; 36V for DC 28V-48V inverter, but please do NOT hook inverter with battery banks for a long time , it will burn the parts of inverter over a period of time. If you want to connect with wind turbine, need connect with a dump load controller, 12v controller for DC 14V-24V inverter; 24V controller for DC 28V-48V inverter; 36V controller for DC 50V-100V inverter. Sometimes, if you are using some heaving appliance like motor, engine, cause the voltage up down very fast, in this moment, big amp will come into the grid inverter, easy to cause the ac mos burned, so surge protector will cut down by itself to protect the grid inverter. You may have experience, when meet the big lightning, the power source of the home appliance may damage, same reason, will also cause the inverter damage, in this moment the lightning protection can release thousand voltages to protect the inverter not damage. High speed AC fuses. Now we put ac fuse outside, each inverter will come our special ac fuse, this will be broken 1 mini/sec, to make sure high voltage spike come in! Is designed for small solar panel & wind energy market, it’s suitable for family energy system. This inverter can directly use solar panel, wind charger through inverter to home grid. Easy to installation, just need solar panel, grid tie inverter, then directly can put into home grid. The inverter can be connected to any outlet in the home providing line power. The inverter IC will monitors the voltage, frequency and phase of the home grid, then produce a pure sine wave phase locked to the grid. The voltage will be just enough higher than the grid’s to feed power into the grid, Then using our current controlled PWM we control the output power to the grid. The inverter will put out power when the home grid is on. The inverter will stop feeding power into the grid when the grid is down, for safety and as required by law. Why should you use a grid tie inverter? When you use power from solar panels to supply the inverter, your home power. Meter will run more slowly(if you are using other electric appliances), or your. Home power meter will run backward(if you are not use any appliances). Why should you use a Power Jack grid tie inverter. In traditional grid tie inverters, the solar panels are connect in series so if one solar panel did not work or had poor efficiency or had a blown bypass diode, then the whole system is affected. With Power Jack inverters, you can use all panels in parallel so if one is not working properly, you only lose the output from that one panel. You can also run several Power Jack inverters parallel instead of having one large expensive unit. If you have just one expensive inverter and it fails you produce no power. If you have several smaller units and one fails you still produce power. Each inverter has it’s own MPPT function so you can extract the maximum power from all of your solar panels. When the dc charge function is normal, the inverter supplies power. If there are no dc sources (like at night or a cloudy or rainy day), the inverter will stop attempting to supply power and shut itself off from the power grid to protect itself and lengthen its lifetime. For DC 14V-24V inverter. For DC 28V-48V inverter. For DC 50V-88V inverter. For DC 102V-158V inverter. 11.5V – 13.5V. Orange light on, fan keep working, but inverter stop working. Green flash faster and more powerful output. Manufacture defects or workmanship, use appropriately, surface of item do not scratch. Manufacture defects or workmanship excludes damage caused by inappropriately used such as improper installation, accident, misuse, abuse, improper storage, or any unauthorized disassembly, repair, or modification. My solar panels are 210W 5 pcs, should I use 5 panels on one inverter or 4 panels. I live in the USA and we use 110V or 220V at 60 cycles. Should I use 1200W grid tie power inverter DC 14V-24V to AC 220V with LCD power meter for solar or 1200W grid tie inverter DC 28V-48V to AC 110V with LCD meter for my solar panels? Should I run them in set of two and double the voltage to 57.7? I like to set it up where I can get the most out of the inverters and the panels, your comments will be highly appreciated. You can use our 1200W grid tie power inverter DC 28V-48V TO AC 220V 60HZ due to below reasons. Your solar panels no load voltage are 35V, and 28V after loading, then the above DC range is just fit it. You can use 5 pcs solar panel and connect them in parallel(DC voltage will be 28V). Then connect them with 1 unit 1200W grid tie power inverter. Regarding use AC 220V system inverter, most home main AC power is 220V. In United States, then separate to 110V(sockets on wall), so you can connect the inverter to home main power (220V) directly. It is ok to use AC 110V inverter, just plug into any home AC 110V socket, but might lose 5-10% power. Q: how to connect Power Jack grid tie inverter? A: inverters DC side connect with solar panels, then the inverter’s plug just plug into home AC socket, and turn on inverter to start work. It is easy to use and no need to add controller. Q: Can solar panels can be hook in series or in parallel? A: solar panels can be hook in series or in parallel, if solar panels are in same voltage, they can be hook in series or in parallel. But if solar panels not in same voltage, they only can be hook in series, can not hook in parallel. Q: Can your grid tie power inverter can be hook together? A: yes, our grid tie power inverter can be connect in parallel, but must be same version. The item “2 IN 1 on/off 1200W Grid tie power inverter DC 28V-48V to AC 110V, LCD, MPPT, solar” is in sale since Thursday, February 11, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “6apex_2012″ and is located in warehouse. This item can be shipped worldwide.

Brand: POWER JACK
Model: 1200w
MPN: does not apply
Country/Region of Manufacture: China

Category: onoff | Comments Off

February 17

600W waterproof grid tie micro inverter, 22-50VDC to 80-160VAC

Output Type:Single is_customized:Yes Brand Name:Mars Rock Type:DC/AC Inverters Size:289x200x38mm Input Voltage:2250VDC Output Current:2.3A or 4.58A Output Voltage:120VAC; 230VAC Output Frequency:50Hz/60Hz Weight:2.68 Kg Model Number:WVC600 Output Power:600W Recommended input power:600W waterproof grid tie micro inverter Recommended voltage of PV module:Vmp>34V/ Voc<50V Maximum input DC voltage:50V Peak power tracking voltage:20-40V Operating voltage range:17-50V Maximum DC short current:40A Maximum input current:25A Peak power output:600W Power factor:>96% Static MPPT efficiency:>99.5%. 600W waterproof grid tie micro inverter, wide voltage 22-50VDC to 80-160VAC, have communication function with 2 meter cable, for 36V system. WVC600 Using IP65 waterproof streamline design, Can effectively prevent rainwater on the surface erosion, Built-in high-performance Maximum Power Point Tracking(MPPT)Function, Better able to track changes in the solar luminosity and control different output power, Effectively capture and collect sunlight. AC electric power transmission using the reverse transmission technology, Is one of our patented technology, The inverter output power can provide load priority use, Extra electricity to the grid, Efficient use of the inverter to the power emitted, Electricity transmission rate of up to 99%. Communication using two modes, Between the inverter and CollectorUsing power line carrier communication signals, Collector with a PC or other devices to communicate Using RS232 serial port/WIFI wireless communication. Intelligent monitoring systems, The inverter can collect real-time data, Inverter can be controlled startup / shutdown / power regulation. The item “600W waterproof grid tie micro inverter, 22-50VDC to 80-160VAC” is in sale since Wednesday, February 17, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “spen8452″ and is located in Sacramento, California. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, ZA, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, PH, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, TR, BR, CL, CO, CR, PA, TT, GT, HN, JM.

Brand: Mars Rock
Model: WVC600

Category: 600w | Comments Off

February 17

600W WATT Wind Turbine Generator Grid Tie Inverter DC10.8-30V AC110V, Stackable

600W Wind Turbine Generator Grid Tie Inverter DC 10.8-30V to AC 110V. This 600W micro grid tie inverter is designed specially for small wind energy system. This inverter can directly connect wind charger through inverter to home grid. This inverter has been built in dump load controller, it can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too strong, and the dump load controlling system can not keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. Features MPPT (Maximum Power Point Tracking) allowing each Wind turbine to run at optimum output. The grid-tie inverter can transfer wind energy from wind generators directly into the home grid using no extra equipment. It can be connected to any outlet (conventional network) in the home. The grid-tie inverter controls the phase and the frequency and voltage of the power generated by the wind generator. It produces a pure sine-wave and matches that of the grid. There are 4 terminals on the left side of the inverter, 1 red terminals and 1 black will be connected to the phase output from the wind turbine, and 2 black terminals will be connected to dump load resistors. There are 4 LED indicators, 3 green indicators and 1 red indicator, 3 green LED indicators will start to cycle from left to right when the grid and AC input supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being output from the wind turbine. The bigger the output power is, the faster the rate is. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, this is called Island Protection. 10.8V 30V DC NOT AC. No need return the original one for low-valued items. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! Pleas message us if recipient address changes needed before we fulfill the order. Sorry, no local pickups available. The free listing tool. The item “600W WATT Wind Turbine Generator Grid Tie Inverter DC10.8-30V AC110V, Stackable” is in sale since Tuesday, July 30, 2013. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “chargerangel” and is located in Hayward, California. This item can be shipped to United States, to Canada, to Mexico.

Type: Grid Tie Inverters
Energy Type: Wind

Category: 600w | Comments Off

February 16

Clean Energy How To Install A Residential Wind Turbine With Grid Tie Inverter

Category: clean | Comments Off

February 16

600W 1.2KW grid tie micro inverter Power line communication mppt pure sine wave

600W 1.2KW grid tie micro inverter. WVC-1200(600) Using IP65 waterproof streamline design, Can effectively prevent rainwater on the surface erosion, Built-in high-performance Maximum Power Point Tracking(MPPT)Function, Better able to track changes in the solar luminosity and control different output power, Effectively capture and collect sunlight. AC electric power transmission using the reverse transmission technology, Is one of our patented technology, The inverter output power can provide load priority use, Extra electricity to the grid, Efficient use of the inverter to the power emitted, Electricity transmission rate of up to 99%. Communication using two modes, Between the inverter and Collector Using power line carrier communication signals, Collector with a PC or other devices to communicate Using RS232 serial port/ WIFI wireless communication. Intelligent monitoring systems, The inverter can collect real-time data, Inverter can be controlled startup / shutdown / power regulation. High performance maximum power point tracking (MPPT). Input /output is fully isolated to protect the electrical safety. Simplify maintenance (user serviceable). Operation and maintenance costs low. WVC600W 110V / 220V. WVC1200W 110V / 220V. Recommend use PV panels. 600W / Vmp>34V / Voc<50V. 4300W / Vmp>34V / Voc<50V. DC MAX input current. AC MAX output power. DC MAX Open-circuit input-voltage. DC input voltage range. MAX output power factor. DC input Reverse voltage protection. AC output voltage range. 49.3-50.5 Hz / 59.3-60.5Hz. Output short circuit protection. Power line carrier-current communication. DIN VDE 1026 UL1741. CE National patent technology. Please install the inverters according to the user manual and connnet the groud safety. Forbid openning the shell with non-professional person , only qualified maintenance person can repair the product. The inverter should be installed in the low humidity and well ventilated place, and remove the flammable things surrounding the inverter for avoiding overheating. Avoid children play when the inverter is working. Ensure the DC input and AC output when connect with PV. The Vmp and Voc of PV should be fuit for the prodcut for get output max. One waterproof inverter which power and output voltage you can select. 1 pouch of screw for micro inverter installation. To worldwide: Small items (< 2 kg). The goods > 2 kg. OEM and ODM services are both available. We would like to be your best supplier in China. The item “600W 1.2KW grid tie micro inverter Power line communication mppt pure sine wave” is in sale since Tuesday, April 07, 2015. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “guangshun2014″ and is located in CN. This item can be shipped to North, South, or Latin America, to all countries in Europe, to all countries in continental Asia, to Australia.

Model: AC 80-160V
Brand: KAIDENG
MPN: KD-600/1200W
Country/Region of Manufacture: China

Category: 600w | Comments Off

February 15

SMA Technologie AG Sunny Boy SB6000US 6000W Grid Tie Solar Inverter

Sunny Boy 5000US/6000US/7000USThe Sunny Boy 5000US, 6000US and 7000US represent SMA larger units in the new US series of Sunny Boy string inverters. They are extremely robust inverters equally suited for large residential or commercial applications. Completely updated with SMA most advanced technology, they were designed specifically to meet the new IEEE 1547 requirements. The larger inverters of the new US series come with an integrated AC and DC disconnect switch making installation even more cost-effective. They can even be configured for positive ground systems in the field making them more versatile than ever. Increased efficiency means better overall performance and shorter payback periods. The Sunny Boy 6000US and 7000US are compatible for use with the Sunny Tower 36 kW and 42 kW systems. Unit was recovered from a forfeited storage unit, it is untested and offered as is as found. It does appear in good condition, has been stored in heavy cardboard boxes, in Excellent cosmetic condition. A mounting plate and disconnect box is included. The unit weighs about 160 pounds. The item “SMA Technologie AG Sunny Boy SB6000US 6000W Grid Tie Solar Inverter” is in sale since Monday, February 15, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “salvagethrift” and is located in Asheville, North Carolina. This item can’t be shipped, the buyer must pick up the item.

Brand: Sunny Boy
Model: SB6000US
MPN: 6000US

Category: technologie | Comments Off

February 15

600W grid tie micro inverter with communication function, 22-50V DC to AC 80-160V

WVC600 Using IP65 waterproof streamline design, Can effectively prevent rainwater on the surface erosion, Built-in high-performance Maximum Power Point Tracking(MPPT)Function, Better able to track changes in the solar luminosity and control different output power, Effectively capture and collect sunlight. AC electric power transmission using the reverse transmission technology, Is one of our patented technology, The inverter output power can provide load priority use, Extra electricity to the grid, Efficient use of the inverter to the power emitted, Electricity transmission rate of up to 99%. Optional communication module has two modes, Between the inverter and Collector Using power line carrier communication signals, Collector with a PC or other devices to communicate Using RS232 serial port/WIFI wireless communication. Intelligent monitoring systems, The inverter can collect real-time data, Inverter can be controlled startup / shutdown / power regulation. Output Current: 2.3A or 4.58A. Output Voltage: 120VAC; 230VAC. Weight: 2.68 Kg. Recommended input power: 600W waterproof grid tie micro inverter. Recommended voltage of PV module: Vmp>34V/ Voc<50V. Maximum input DC voltage: 50V. Peak power tracking voltage: 20-40V. Operating voltage range: 17-50V. Maximum DC short current: 40A. Maximum input current: 25A. Peak power output: 600W. Static MPPT efficiency: >99.5%. High performance maximum power point tracking (MPPT). Powerful MPPT algorithm, Optimize the power from the solar panels to collect, Accurately capture and lock the maximum output power point, A substantial increase in output power greater than 25% or more. Reverse efficient power transmission technology, Patented technology, The inverter power transmission in the reverse direction, Automatic detection circuit load and using priority, Additional power transmitted to the grid, Power transmission rate up to 99.9%. Higher output efficiency in photovoltaic application system manipulation. Input /output is fully isolated to protect the electrical safety. Simplify maintenance (user serviceable). Operation and maintenance costs low. Recommend the use of PV modules. Maximum input DC voltage. Peak power tracking voltage. Min / Max start voltage. Maximum DC short current. Maximum units per branch circuit. Night time power consumption. Operating temperature range (inverter inside). Reverse transfer, load priority. DIN VDE 1026 UL1741. CEC, CE National patent technology. This 600W grid tie micro inverter has double AC output and DC input. It is easy for customers to connect several micro inverters together. The item “600W grid tie micro inverter with communication function, 22-50V DC to AC 80-160V” is in sale since Sunday, February 14, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “zjpower18″ and is located in Pratt, Kansas. This item can be shipped to United States.

Brand: Unbranded
Model: WVC-600-120V
MPN: WVC600
Country/Region of Manufacture: China

Category: 600w | Comments Off

February 14

Wind Turbine Controller 0-90v input 60 amp Grid Tie Inverter switching system

Dump load controller made in the US for micro wind turbines. Made by a wind turbine installer. Features a 0-90vdc input to trigger an external 100 amp relay. The system must have a constant 12vdc to operate. Digital volt meter reads the turbine voltage. Rated at 100 vdc. No external power needed for the volt meter to work. LED indicator lights on the board for on/off operation. Rated for indoor use only. SSR’s burn out so i went with reliable mechanical relays. Most parts can be bought locally. Comes fully wired with 60 amp wiring. Only break to service the turbine, not in the middle of mid to high winds. Ties in parallel to your existing rectifier. Use it for dc switching dump loads or grid tie inverters or battery banks. Adds protection to your system. Hooking this system up in parallel to your existing wind turbine rectifier will not drain your battery bank as other dump load controllers do. This can also be used to switch grid tie inverters from battery to grid tie or from a lower grid tie inverter to a higher voltage grid tie inverter. The higher the voltage you dump the less amps you will be dumping. So a 1000w 48v wind turbine will need a dump load coil to handle a 1000w 48vdc wind turbine would calculate to the battery voltage of 52 battery volts divd. By 1000 w =19.2 amps. For a dump coil, even it out to 25 amps. The lower voltage you dump at the higher the amps are, as you can see below. 14 vdc x 60 amps = 840 watts (12 vdc battery system). 28 vdc x 60 amps = 1,680 watts (24 vdc battery system). 52 vdc x 60 amps = 3,120 watts 48 vdc battery system. Relay 12v coil 100 amp Dump load 60 amp max Volt meter 0-100vdc. Activates at 4 vdc for display Controller. 12Vdc power to remain on 0-90Vdc input to trigger external relay can be custom set with an external volt meter 1/10 scale. 5.1 v = 51 volt trigger ect. 3 dip switches for delay dumping 5 sec. Instant on off with no dip switches activated. I recommend at least one dip switch be turned on so the relay is not going on and off as much. That wears on the main relay. Normally open and normally closed options by using the built in switch Fuse protection. Dump coil not included. 80 amp rectifier with heat sink 60 amp wiring stranded AWG. 1/2 backer board with sheet metal cover for easy mounting components. Large 60 amp lugs for wire termination to dump coil or other device. All 60 amp lugs rated for Copper or Alumin. System activated uses 2 watts at time of switching. Do not input more then 90vdc in to the controller. This will destroy it. We will decide if a repair or replacement is needed. Must be in originol packaging. There are a lot of controllers out there that are junk and hype. My system is one of a kind and built from my trade experience. Every system is custom made just for you and tested before it leaves our shop. The item “Wind Turbine Controller 0-90v input 60 amp Grid Tie Inverter switching system” is in sale since Thursday, September 17, 2015. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “llea6423″ and is located in Pottstown, Pennsylvania. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, ZA, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, PH, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, TR, BR, CL, CO, CR, PA, TT, GT, HN, JM.

Brand: Custom
Country/Region of Manufacture: United States

Category: wind | Comments Off

February 14

Wind turbine grid tie inverter 1500W LCD 45-90V AC Input 220VAC Output

Wind turbine grid tie inverter 1500W LCD 45-90V AC Input 220VAC Output. Used, In Perfect Working Condition. Cable Included EU socket. Normal AC Output Power. Maximum AC Output Power. AC Output Frequency Range. Total Harmonic Distortion(THD). AC Input Voltage Range. 3 phase AC:45V90V. The item “Wind turbine grid tie inverter 1500W LCD 45-90V AC Input 220VAC Output” is in sale since Thursday, February 11, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “siramin4″ and is located in Jerusalem. This item can be shipped worldwide.

Brand: chinesegrid.com
Model: SUN-1500G-WAL-LCD
MPN: Does Not Apply
Country/Region of Manufacture: China

Category: wind | Comments Off

February 2016
M	T	W	T	F	S	S
« Jan				Mar »
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29