1000W Watt Solar Micro Grid Tie Power Inverter for Solar Panel 10.5-30V AC

Recommended using solar panels. Solar panel open circuit voltage range. Peak power tracking voltage. Maximum input operating current. Dimensions L× W × H. Reverse transfer, load priority. Red terminal: Connect DC positive, black terminal: Connect DC negative. 2 Input voltage range: 10.5V to 28V. Solar Panel: Recommend using the power more than 30W and the standard voltage of 17.5V PV panel. Recommend using multiple solar panels. Solar panel in series will result in high-input voltage which will exceed the working voltage range of the inverter. Wind turbine system: Rated voltage 24VDC, maximum voltage 28VDC. 2 Voltage range of the inverter whose output is 220V AC. 2 Voltage range of the inverter whose output is 110V AC. A:90140V (USA plug). B:180260V (Australian, British, European Union Plug OPTIONAL). 1Low-voltage protection (input DC voltage is less than 10.5VDC). 2Over-voltage protection (Input DC voltage is greater than 28.5VDC). 3Over-temperature protection when the chassis temperature is above 75. The temperature dropped about 2-10 minutes to restart automatically after cooling. 4Fault Protection (when 110VAC or 220VAC power outage or shutdown). 5Islanding protection: When the electric supply stop, the inverter automatically shut down output. 1Green LED flashing: The inverter is adjusting power output. MPPT is in working condition. 2Green LED long in time: The inverter is in working condition with the maximum output power. Please pay attention of the voltage when use the product. The voltage is from 10.528V, if is not these voltage the product may broken. Non-professionals do not disassemble. Only qualified personnel may repair this product. Please install inverter in the low humidity and well-ventilated place to avoid the inverter over-heating, and clear around the inflammable and explosive materials. When using this product, avoid children touching, playing, to avoid electric shock. Optimal length of the DC input line 8M or less, long cable will allow solar panels to the inverter DC voltage drop caused by wear and tear. Connected to a power outlet to provide AC. Connected solar panels, battery DC input DC power supply cable. One standard AC wire. The item “1000W Watt Solar Micro Grid Tie Power Inverter for Solar Panel 10.5-30V AC” is in sale since Wednesday, November 22, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “zhifang006-9″ and is located in Los Angeles. This item can be shipped to United States.

Brand: Unbranded
MPN: Does Not Apply

Category: 1000w | Comments Off

December 29

400 W Grid Tie Inverter + 12V 200 Watt Mono Solar Panel (2 x 100W) + Z Mounting

Green ergyStar Grid Power II 400W Inverter + 2x 100W Monocrystalline Solar Panel + Z Mounting 2Sets Grid-Tie Starter Kit. 2nd Generation Grid Tie Inverter. What is a Micro Grid-Tie Inverter? First, we should know what a Grid-Tie Inverter is. A Grid-Tie Inverter is a device that that can transform DC electricity (ie: Solar Panels, Wind Turbine, Battery Storage) into AC power that can be directly injected into your utility’s electricity network (the power grid). As of today, most inverters available in the market are in the high output (1000W 5000W) category. Their prices ranges in the thousand’s range and it is just too much of an up front cost for anyone interested in green energy generation. In addition, because of the high output, a certified electrician will need to be hired to install the equipments and connect the cables. Ever since we invented the first generation of the Micro Grid Tie Inverters, connecting to the grid has never been this easy and affordable. This is the perfect start up solution for anyone interested in green energy generation as it is affordable and maintenance free. In addition, our inverters are stackable ; meaning multiple unit of these devices can be connected in parallel to generate a higher output. It is up to us. Up to this generation. To lead mankind into a greener future. Non- Reusable Power being consumed today. Reusable Power being generated for a better tomorrow and a brighter future. What’s New in the 2nd Generation? So you ask, What’s new in this second generation? Well, there are number of upgrades in performance, safety and display that are not available in the first generation or other inverters in the market. We will use our Enviro-Techs SSI-200W first generation inverter as the base model for comparison. Here are the high lights: Performance. 152 x 143 x 57 mm. 163 x 154 x 57 mm. 400W, 60% enhanced in Power Output – 38.5% better in Space Utilization. 51% better in Weight Reduction with. New Model: GP2-400 Second Generation Normal Operation. AC Disconnected / Fault. Unique and intuitive display design – LED cycling in circular formation – Represent electric meter spinning backward and power is being output to the grid – Smooth motion. New Model: GP2-400 (30A External Fuse). External 30A Fuse for easy maintenance -Utilizing low resist DC input circuit to increase efficiency. Reverse Polarity protection – Buzzer will alarm when fuse need to be replaced – Reduce internal temperature. Automatic AC Voltage & Wider Voltage Range for DC input. New Model: GP2-400 (Automatic Voltage Switch). Automatically Switch between 110V 220V AC – Compatible with grids from ANY countries. No more manual switch – Avoid unit being damaged because of human mistakes – Cleaner User Interface – Wider DC Input Voltage Range 10.8V 28V – Allow MORE types of power source to be connected (ie: Air-X, 12V Battery, and etc). Feature: – Grid-Tied – sell green power directly back to the grid at a premium rate (depends on your location) – Maximum Power Point Tracking (MPPT) – optimize power output – Plug and Play Design, simply plug into an outlet (GFI), no hard-wiring – 60% enhanced in power output compare to first generation inverters – 38% better in. And 51% better in. With higher quality parts – Unique and intuitive LED display design to reflect power output rate – External 30A Fuse for easy maintenance – Automatic 110V – 220V AC voltage switch, NO MORE manual hassle – Wider DC Input Voltage Range, from 10.8V 28V compare to 1st generation’s 14V 28V – Allow MORE types of power source to be connected ie: Air-X, 12V battery, and etc. Aluminum enclosure will act as heat sink to help dissipate heat – Stackable (connect in parallel for higher output) – Island protection: Inverter will shut down during black outs. Simple and safe installation – Reverse polarity protection – Generates pure Sine Wave – Constant Power Output – Low distortion output on all ranges – Allow different Power factor from loads – Does not require rewiring of existing electronics – Compact and light weight design Installation. Figure 1: AC Power. Figure 2: DC Input. Install in a low humidity and well-ventilated area. Remove all flammable objects. Connect the Solar Panel, Battery or Wind Turbine’s DC supply cables to the DC input terminal of the inverter as shown in Figure 2. Wind Turbine installations will require respective charge controllers and dump loads. Connect the inverter to a wall socket with the supplied AC Power Cord as shown in Figure 1. Pay close attention to the polarity of your DC input. Connecting incorrectly might blow the fuse. In such case the inverter will make a buzz sound whenever power is connected and the fuse will need to be replaced. Electrical Specifications – Output. Maximum AC Output Power. 100 260V Auto Switching. Total Harmonic Distortion (THD). Yes, inverter shuts down during black out. Electrical Specifications – Input. DC Input Voltage (Solar & Wind). 10.8V – 28V. Unlimited as long as it doesn’t exceed main circuit amperage limit. 20’C – 65’C. 1.27kg 2.65lb. Dimension (L x W x H). 16.3 x 15.4 x 5.7 cm 6.3″ x 6.10″ x 2.25. Wall Mount at base. Convection cooled with fan. 1 Red and 6 Green LED. 2x 100W Monocrystalline Solar Power Panel Power (max): 2pcs x 100w = 200w. Open Circuit Voltage (Voc). Maximum Power Voltage (Vmp). Short Circuit Current (Isc). Maximum Power Currrent (Imp). ±5% (104.5W – 115.5W). 40’C to 80’C. Install to box (90cm). 120.5 x 55 x 3.5cm 47.4 x 21.7 x 1.4 inches. 8.4kg, 40.5lbs. Solar Panel Z Mounting Bracket Set (2 Sets). To install no flat surfaces, secure brackets to the back of the panel’s frame. The panel will have 1 3/8 inches of elevation / surface clearance to dissipate heat with free flow of air. Then secure the elevated panel to the surface with wood screws. On Rails / Other Mountings. Act as clamps to secure panels to our GreenergyStar Mountings. Can be installed to your Rooftop (Sample Picture). Solar panel generates free energy for many general household appliance. These solar panels also specially designed for use in sailing boats, green houses, cars, radios, recreational vehicles, portable televisions, warning lights, flash lights, garden lights, house light, garage lights and ventilators for rooms and cars. They can also be installed into a grid-tie system. 36 pieces silicon solar cells – Enclosed with epoxy and high-quality resin material – Rain proof, rust proof and corrosive proof, protects against wind, rain, salt air and solar radiation. Weather resistant, charge batteries in dry/wet condition. What are included: – One GreenergyStar GP2-400 Hybrid Grid-Tied Inverter – One spare 30A fuse – One 1.5m North America Standard AC Cable – Instruction Manual. 100W Monocrystalline Solar Panel. Adjustable Universal Pole Mount Fence Pole, Aluminum Angle Rail NOT Included in this listing. Improper installation, accident, misuse. Any unauthorized disassembly, repair, or modification. All pictures and descriptions are subjected to change without notice. We are not responsible for any inadvertent errors. For Address that UPS determined to be outside of their normal service area, they will charge an additional “extended area surcharge”. Items that are used/ damaged/ deformed or altered in any ways will not be accepted. Spams and mass e-mailing will be deleted without slightest glance. E-mails with virus or anything subjected to hacking are automatically deleted. The item “400 W Grid Tie Inverter + 12V 200 Watt Mono Solar Panel (2 x 100W) + Z Mounting” is in sale since Friday, April 21, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “hi_iq” and is located in Vancouver, British Columbia. This item can be shipped to United States, Canada.

Brand: GreenergyStar
MPN: Does Not Apply

Category: grid | Comments Off

December 21

Fronius, Primo, 7.6Kw, 7,600 Watt, Wifi Grid Tie Inverter

Fronius Primo Grid Tie Transformerless Inverters. The Fronius Primo single-phase inverters are the the ideal solar inverter for residential applications wth a 208/240 grid connection. The SnapINverter has many standard features, making it a convenient and “one-stop shop” for a high quality inverter. The hinge mounting system and lightweight inverter itself creates a streamlined installation process that can be done in under 15 minutes. Several industry-leading additions come standard with the Fronius Primo including Wi-Fi and SunSpec Modbus interfaces for seamless monitoring and datalogging, field proven Arc Fault Circuit Interruption (AFCI), and Fronius free online and mobile monitoring platform. The Fronius Primo is NEC 2014 compliant and ready for codes and standards of the future. AFCI protection shuts down the inverter in the event of an arc fault. Ground Fault Protection with Isolation Monitor Interrupter. DC Disconnect and DC reverse polarity protection. NEMA 4X enclosure offers ultimate protection from the elements – for indoor or outdoor installation. Dual MPPT allows for optimum productivity in designs with different roof orientations, shading of one or two strings, or the use of residual modules. Free, integrated Wi-Fi interface for datalogging allows user to connect to internet without additional BoS and grants the perfect overview of how the PV system is operating. Innovative SnapINverter mounting system makes installation and servicing extremely user-friendly and quick. The inverter is simply placed in the wall bracket and then secured. Field serviceable for lowest cost of ownership – no need to remove the entire inverter for servicing, just the power stage set compartment. All the cabling, settings and configurations remain in place. NEC 2014 compliant (with the easy implementation of the Fronius Rapid Shutdown Box) and Smart Grid Ready. 107.1-01 (September 2001) , UL1699B Issue 2 -2013, CSA TIL M-07 Issue 1 -2013. ELECTRICAL CHARACTERISTICS (3.8 – 8.2). Recommended PV power (kWp). 3.0 – 6.0 kW. 4.0 – 7.8 kW. 4.8 – 9.3 kW. 6.1 – 11.7 kW. 6.6 – 12.7 kW. Usable input current (MPPT 1 / MPPT 2). 18 A / 18 A. Admissable conductor size DC. AWG 14 – AWG 6. 240 – 480 V. 250 – 480 V. 270 – 480 V. Max Output Power (208/240V). Continuous Output Current (208/240V). 18.3A/ 15.8A. 28.8A/ 25.0A. 36.5A/ 31.7A. 38.0A/ 34.2A. Recommended OCPD/AC breaker size (208/240V). Admissable conductor size AC. ELECTRICAL CHARACTERISTICS (10.0 – 15.0). 8.0 – 12.0 kW. 9.1 – 13.7 kW. 10.0 – 15.0 kW. 12.0 – 18.0 kW. 33 A / 18 A. 260 – 480 V. 320 – 480 V. 48.1A/ 41.6A. 54.8A/ 47.5A. 60.1A/ 52.1A. 66.1A/ 62.5A. AWG 10 – AWG 2. < 2.5 %. My solar experience in site surveys, design, installations, and maintenance of 300 plus clients, specializing in off grid homes, and owning my own off grid home. Solar is part of my life and the bonus of meeting so many different clients needs, remains my quest to see more people enjoy their home with solar. I have taken advantage of my suppliers for the last 25 years to give you the best price I possibly can. If you dont find what you need on my site, please tell me what you need and I will do my best to get it for you. If you are new to solar and need help, feel free to reach out to me. I will be more than happy to design a system for your needs. Contact me at 207.280.0625 with your questions. The item "Fronius, Primo, 7.6Kw, 7,600 Watt, Wifi Grid Tie Inverter" is in sale since Saturday, June 17, 2017. This item is in the category "Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters". The seller is "everyonessolar" and is located in San Luis Obispo, California. This item can be shipped to United States, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Bahrain, Croatia, Malaysia, Brazil, Panama, Jamaica.

Country/Region of Manufacture: United States
Brand: Fronius
Bundle Listing: No
Featured Refinements: Grid Tie Inverter
MPN: Primo 7.6-1

Category: fronius | Comments Off

December 21

1000W Watt Solar Grid Tie Inverter DC 18V 30V 36V To AC 110V/220V With MPPT

You may also like. 1000W Watt Solar Grid Tie Inverter DC 18V 30V 36V To AC 110V/220V W/ MPPT. Smart Grid Tie inverter is a compact unit, which directly converts direct current into alternating current for powering appliances and/or office equipments and connecting to utility grid. Smart Micro inverter specially optimized design to work with modularization of DC power supplies which includes the mainstream solar modules. 18V(36cells), 24V(60 cells) and 36V (72cells). Moncrystal and/or polycrystalline solar panels and batteries. Distributed modularization design philosophy for smart micro inverter insures the productiveness of the whole system and will not affect by a single point of failure. Each Smart Micro inverter is individually connected to each PV module in the array. This unique configuation means that an individual Maximum Peak Power Point Tracker(MPPT) controls each PV modules in the array which may be affected by shading, soiling, orientation or mismatch, etc. Smart Micro inverter insures top performance for maximizing energy production from the whole PV system and gets return on investment in less time. Unique circuit design, choice of import industrial electronic components, higher efficiency, more stable performance. Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more reliable. Parallel type design for DC input and modularization design for inverter, small volume, distributed installation easy for system configuration, flexible for combination, strong expansibility of system. Adopting high-frequency isolation transformer type, high efficiency, and high security. Perfect electrical protection function. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion. Getting electronic circuit design, apperance design and other core technology Patents. User Manual (English) x1. Red terminal: Connect DC positive, black terminal: Connect DC negative. Shown in Figure 1. AC socket: Connection to the mains. The AC cord to the inverter 3 foot outlet, then the AC cord to home. Are shown in Figure 2. Switch: properly connected; turn on the switch, the inverter to work. Application of Street lights. Use this product, do not need to add a fan controller, solar panel controller, battery. This connection method, wind energy, solar energy can supply to the grid at the same time, the highest efficiency. (The purpose of small power inverter become high-power inverter). In order to achieve higher power use requirements, the use of this product can be stacked, such as: 4 grid inverter 300W of stack used is equal to 1200W, and the number of open stacks(No Quantitative Restrictions). Used as shown in Figure 2. Red LED indicator lights up under any conditions as listed below. Low-voltage protectionDC input voltage lower than Min. Input voltage of inverters. Over-voltage protectionDC input voltage higher than Max. Over-temperature protection inverters will be shut down for power output when the temperature of body of inverters higher than 65-75. And inverter will be automatically restart up when the temperature of body of the inverter down to 40-50. Power grid fault protection when 110VAC or 220VAC grid power outage and/or tripped. Islanding protection: inverter will be automatically shut down for power output when disconnect wit. We will message you if it happens. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. The item “1000W Watt Solar Grid Tie Inverter DC 18V 30V 36V To AC 110V/220V With MPPT” is in sale since Wednesday, September 14, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “solarregulator” and is located in Shenzhen. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

Brand: Y-SOLAR
Model: 1000W 36V Solar Inverter
MPN: 9699035
Country/Region of Manufacture: China
Frequency:: 50Hz/60Hz(Auto control)
Certification: CE ROHS
Type: Pure sine wave inverter
Function: With MPPT
Solar Panel: 24V/30V/36V 60cells/72cells panel

Category: 1000w | Comments Off

December 20

600W watt Solar Grid Tie Inverter DC 10.8V-30V TO AC 110V/120V 92% Efficiecy

MPPT Solar 600W watt Grid Tie Inverter 10.8V-30VDC TO 110V/120VAC Pure Sine Wave. Brand: iMeshbean 100% High Quality. We have proudly designed our own products and successfully created our own brands in the industries. In order to provide the peaceful shopping experience, our dedicated customer service teams can response to all the requests within 24 hours. We honor 30 days return on any products customers are not satisfied. Being our customer is a wise choice! Small Grid Tie Photovoltaic System (SGPV) Pure Sine Wave- Maximum Power Point Tracking function(MPPT) Peak Inverter Efficiency: 92% Stackable (connect in parallel for higher output) Island protection: Inverter will shut down during black outs. Simple and safe installation- Reverse polarity protection Constant Power Output Low distortion output on all ranges Allow different Power factor from loads LED display RoHS Compliant. Connect the Solar Panel DC supply cables to the DC input terminal of the inverter, be sure that the polarity is correct. Recommended DC input cable size for maximum output is 8AWG or cables that can handle more than 30A. Optimal length would be less than 8m, longer cables will experience higher voltage drop. Connect the supplied AC power cord to the inverter and plug it to a home wall socket. The 3 green LED indicators will start to cycle from left to right when the grid and DC supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being output from the solar panels. The more big output power is, the more fast the rate is. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, and this is called Island Protection. The individual system of SGPV (Small Grid Tie Photovoltaic System) is shown in the following Figure. Installing the solar panel of the SGPV at a suitable location that sunshine can irradiate on it, connecting the cables of the solar panel to the DC input terminals of the small grid tie inverter of the SGPV, inserting the plug of the inverter into the socket of the home grid. After this, when the sun shines, the SGPV will convert the solar energy to the home grid. Plug and play stack as many as you need. SGPV can be stackable, and all SGPVs are independent each other. The total power converting to the grid is the total power of all SGPVs. The installation of each SGPV is same. Connecting large quantity of SGPV. To the grid, this will construct high-power grid-tie system Works great for solar panel 1000 watts and under…. We are not responsible for undeliverable address. Pleas message us if recipient address changes needed before we fulfill the order. Sorry, no local pickups available. No need return the original one for low-valued items. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! The item “600W watt Solar Grid Tie Inverter DC 10.8V-30V TO AC 110V/120V 92% Efficiecy” is in sale since Monday, March 21, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “chargerangel” and is located in Hayward, California. This item can be shipped to United States, Canada.

Brand: Mass Power
MPN: Does Not Apply

Category: 600w | Comments Off

December 11

XANTREX GT3 3000 WATT SOLAR Grid-Tie Inverter. 3kW AC 208/240V WORKS GREAT

This thing still works like a champ! Just plug your DC solar array into the DC inputs, and tie the AC outputs to your home grid. I currently have the AC terminated to a standard 240 plug typically usually found on a dryer. Easil;y removed if you want to tie directly into a breaker. In Colorado, I was able to plug this directly into a 240 outlet, and it pushed the grid reliably with no problem. This setup helped to save me the costs of an electrician. Laws elsewhere may differ, I’m not sure. Take it home for far less. I will provide a PDF of the full manual. Item is located in California. It is not lightweight. There are some cosmetic scratches on the unit, but it works perfectly fine. Redefining the grid-tie inverter is a tall order, but thats exactly what Xantrex has done with the Xantrex GT 3.0 Grid Tie Solar Inverter. The three-kilowatt high performance PV string inverter offers superior PV energy harvest, easy installation, state-of-the-art design and high reliability. Its also setting a new standard for inverter cost by offering the best price/performance ratio in the industry! The Xantrex GT 3.0 Inverter makes life easier for installers of solar power systems. Its modular design and integrated, lockable 600 volt PV/Utility disconnect switch eliminates the need for costly external disconnects and results in simpler, cleaner installations. Its attached wiring box provides protection for all AC and DC connections, eliminating exposed wiring during inverter installation and removal. The wiring box includes eight 34 inch knockouts and easy access DC and AC terminal blocks that accept wire sizes from #14 to #6 AWG. The GT 3.0 is packaged in a rugged NEMA 3R rated enclosure for reliable outdoor installation. To make mounting single and multiple inverters simple, the GT 3.0 incorporates a slotted, hook-style back plate. For large systems, multiple inverters can be mounted side by side centered on standard 16 stud spacing to reduce visible conduit and make installations look more attractive. GT inverters come standard with a backlit 16-character two line Liquid Crystal Display. Tapping a finger close to the LCD activates the backlight display. With each tap, the display cycles through all the communication screens. The LCD is always on standby, ready to provide information even at night. When inverters are daisy chained using standard CAT5 Ethernet cable, each inverter display will report the output of the entire system in addition to individual inverter output. Our GT 3.0 offers an isolated RS232 port and two Xanbus RJ45 communication ports. Unlike competitive inverters, no additional communication ports or cards are needed to connect a PC. The LCD can be used simultaneously, even when a PC is connected to the RS232 port. Download the GT Solar Inverter Viewer. Superior PV Energy Harvest. Engineered to make the most of a PV grid tie system investment, our GT 3.0 provides high power conversion efficiency, excellent thermal performance, and rapid Maximum Power Point Tracking. Rapid Maximum Power Point Tracking The Xantrex GT 3.0 Maximum Power Point Tracking algorithms rapid response to insolation events, like moving cloud coverage, maximizes the output energy of connected PV strings. It has a wide input range from 195 to 550 volts DC ensuring the inverter begins to operate earlier in the day, and is more resistant to array shading. It also allows more flexible array sizing. For small and large systems, our GT 3.0 offers high peak and average efficiency to convert all the valuable energy produced by solar panels into useable electricity. As temperatures climb, solar panels and inverters heat up and produce slightly less energy. To minimize energy loss due to heat, our GT 3.0 has a large aluminum heat sink to keep its electronics cool even in the hottest climates. Unlike competitive inverters that start to derate as early as 25°C (77°F), the GT 3.0 provides 3000 watts of power up to 30°C (86°F) and 2,500 watts of power up to 45°C (113°F). So all the energy produced by the solar panels is efficiently converted to AC power and sent to the utility grid. For added protection from heat in desert extremes or south facing inverter installations, an optional fan kit can be ordered. To ensure the GT 3.0 is a dependable, high-quality product, Xantrex engineers have tested it extensively during the design process using an evaluation method called Highly Accelerated Life Testing. HALT combines powerful thermal and vibration technologies to stress a product beyond its specifications. This enables our engineers to find and fix product defects that may not be discovered by testing methods typically used by other inverter manufacturers. Our sophisticated HALT techniques go beyond conventional testing, which results in improved product reliability and quality. The GT 3.0 was also thoroughly field-tested. Prior to market introduction, the GT 3.0 logged more than 15,000 test hours in home installations. To ensure reliability, the HALT chamber combines powerful thermal and vibration technologies to test a product and its components beyond product specifications. High Performance String Inverter. >94% peak and average efficiency maximizes your PV investment. Fast MPPT tracking algorithm ensures maximum energy harvest from your array under any conditions. Excellent thermal performance: provides 3.0 kW up to 30º C and 2.5 kW to 45º C with no fan required. Optional fan kit extends thermal performance for extremely hot climates (see graph on reverse). FCC Part B compliance means less potential interference with communication, radio, and consumer electronics. Easy and Less Costly to Install. Wide PV input MPPT tracking voltage range makes module selection and sizing extremely flexible. Includes a lightweight and versatile mounting bracket that simplifies installation. Modular design allows inverters to be mounted side by side using each wiring box as a wiring raceway. Easy access PV and utility terminal block simplifies wiring. Integrated lockable utility/PV disconnect saves installation time and balance of system component cost. Wiring box can be separated from the sealed inverter enclosure allowing DC/AC connections to remain intact in the unlikely event that the inverter needs to be serviced. Rugged NEMA 3R inverter enclosure allows reliable outdoor and indoor installations. Full Featured Inverter Display and Communications. LCD vibration sensor allows the tap of a finger to turn backlight on and display screen cycling. Bright LED indicators provide system status at a glance. Integrated RS232 and Xanbus RJ45 communication ports. PC software for remote monitoring and system troubleshooting. Maximum AC Power Output. True Sinewave, current source. 211 to 264 VAC (240 VAC). 59.3 to 60.5 Hz (60Hz). DC Input Voltage Range. 195 to 600 VDC. Peak Power Tracking Voltage Range. 195 to 550 VDC. Maximum Continuous Output Current. Night Time Power Consumption. 1W (Communications and Liquid Crystal Display continuously active). CSA listed to UL 1741 and CSA107.1-01, FCC Class B. 25°C to +65°C (-13°F to +149 °F). 45 lbs (20.4 kg). 58.7 lbs (26.6 kg). 34.1″ x 20.4″ x 10.3 (86.6 cm x 51.8 cm x 26.2 cm). Inverter Dimensions (H x W x D). 28.5″ x 15.9″ x 5.7 (72.5 cm x 40.3 cm x 14.6 cm). Wall Mount (mounting bracket included). Eliminates need for external PV (DC) disconnect. Convection (no fan required). RS 232 and two Xanbus RJ45 ports. PV, Utility, Ground, and Communications connections. Wiring box can be separated from inverter. Part / Model Number. For extreme temperatures and/or south facing inverter installations. The item “XANTREX GT3 3000 WATT SOLAR Grid-Tie Inverter. 3kW AC 208/240V WORKS GREAT” is in sale since Wednesday, December 06, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “sagesound” and is located in McKinleyville, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia.

Brand: Xantrex
Model: GT3
Bundle Listing: No
MPN: Xantrex gt3.3n-na-240/208 UL-05

Category: xantrex | Comments Off

December 3

600W 600 WATT GRID TIE INVERTER ACCEPT 10.8V-30 VDC/120VAC, pure sine wave

Wind Grid Tie Inverter. 300W 10.8-30VAC to 110V. 300W 10.8-30VDC to 110V. 500W 10.8-30VAC to 110V. 500W 10.8-30VDC to 110V. 500W 22-60VDC to 110V. 1000W 22-60VDC to 110V. 1000W AC22-60V to 110V. Solar Grid Tie Inverter. 300W 10.8-30VDC to 110V/240V. 600W 22-60VDC to 110V. 600W 10.8-30VDC to 110V. 2500W Off Grid Inverter. We also have the other 600W Solar Grid Tie Inverter Version for sale, please check it. 600W Solar Grid Tie Inverter with the Input Voltage Range DC 22-60V. 600W Small Grid Tie Power Inverter. Wiring diagram for more than two inverters. This 600W micro grid tie inverter is designed specially for small power solar panel energy system. This inverter can directly connect solar panel, through inverter to home grid. Easy to installation, just need solar panel, grid tie inverter, then directly can put into home grid. Note: this inverter only has grid tie inverter function, do not have traditional inverter function, please do not connect. With the battery and the solar panel at the same time. Features MPPT (Maximum Power Point Tracking) allowing each solar panel to run at optimum output. Normal AC Output Power. Maximum AC Output Power. Total Harmonic Distortion(THD). 1, Connect the Solar Panels DC supply cables to the DC input terminal of the inverter, be sure that the polarity is correct. Recommended DC input cable size for maximum output is 8AWG or cables that can handle more than 30A. Optimal length would be less than 8m. Longer cables will experience higher voltage drop. The range of output power of Solar Panel is 40W600W. Connect the supplied AC power cord to the inverter and plug it to a home wall socket. 3, The 3 green LED indicators will start to cycle from left to right when the grid and DC supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being output from the solar panels. The more big output power is, the more fast the rate is. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, this is called Island Protection. The individual system of SGPV (Small Grid Tie Photovoltaic System) is shown in the following Figure. Installing the solar panel of the SGPV at a suitable location that sunshine can irradiate on it, connecting the cables of the solar panel to the DC input terminals of the small grid tie inverter of the SGPV, inserting the plug of the inverter into the socket of the home grid. After this, when the sun shines, the SGPV will convert the solar energy to the home grid. Plug and play stack as many as you need. SGPV can be stackable, and all SGPVs are independent each other. The total power converting to the grid is the total power of all SGPVs. The installation of each SGPV is same. Connecting large quantity of SGPV. To the grid, this will construct high-power grid-tie system. Works great for solar panel 600 watts and under…. The item “600W 600 WATT GRID TIE INVERTER ACCEPT 10.8V-30 VDC/120VAC, pure sine wave” is in sale since Thursday, August 03, 2017. This item is in the category “Consumer Electronics\Multipurpose Batteries & Power\Battery Chargers”. The seller is “chargerdeal” and is located in California. This item can be shipped to United States.

Brand: masspower
Model: SUN-600G
MPN: Does not apply
Type: Solar Grid Tie Inverters

Category: 600w | Comments Off

November 16

Fronius, Primo, 6.0Kw, 6,000 Watt, Wifi Grid Tie Inverter

Fronius Primo Grid Tie Transformerless Inverters. The Fronius Primo single-phase inverters are the the ideal solar inverter for residential applications wth a 208/240 grid connection. The SnapINverter has many standard features, making it a convenient and “one-stop shop” for a high quality inverter. The hinge mounting system and lightweight inverter itself creates a streamlined installation process that can be done in under 15 minutes. Several industry-leading additions come standard with the Fronius Primo including Wi-Fi and SunSpec Modbus interfaces for seamless monitoring and datalogging, field proven Arc Fault Circuit Interruption (AFCI), and Fronius free online and mobile monitoring platform. The Fronius Primo is NEC 2014 compliant and ready for codes and standards of the future. AFCI protection shuts down the inverter in the event of an arc fault. Ground Fault Protection with Isolation Monitor Interrupter. DC Disconnect and DC reverse polarity protection. NEMA 4X enclosure offers ultimate protection from the elements – for indoor or outdoor installation. Dual MPPT allows for optimum productivity in designs with different roof orientations, shading of one or two strings, or the use of residual modules. Free, integrated Wi-Fi interface for datalogging allows user to connect to internet without additional BoS and grants the perfect overview of how the PV system is operating. Innovative SnapINverter mounting system makes installation and servicing extremely user-friendly and quick. The inverter is simply placed in the wall bracket and then secured. Field serviceable for lowest cost of ownership – no need to remove the entire inverter for servicing, just the power stage set compartment. All the cabling, settings and configurations remain in place. NEC 2014 compliant (with the easy implementation of the Fronius Rapid Shutdown Box) and Smart Grid Ready. 107.1-01 (September 2001) , UL1699B Issue 2 -2013, CSA TIL M-07 Issue 1 -2013. ELECTRICAL CHARACTERISTICS (3.8 – 8.2). Recommended PV power (kWp). 3.0 – 6.0 kW. 4.0 – 7.8 kW. 4.8 – 9.3 kW. 6.1 – 11.7 kW. 6.6 – 12.7 kW. Usable input current (MPPT 1 / MPPT 2). 18 A / 18 A. Admissable conductor size DC. AWG 14 – AWG 6. 240 – 480 V. 250 – 480 V. 270 – 480 V. Max Output Power (208/240V). Continuous Output Current (208/240V). 18.3A/ 15.8A. 28.8A/ 25.0A. 36.5A/ 31.7A. 38.0A/ 34.2A. Recommended OCPD/AC breaker size (208/240V). Admissable conductor size AC. ELECTRICAL CHARACTERISTICS (10.0 – 15.0). 8.0 – 12.0 kW. 9.1 – 13.7 kW. 10.0 – 15.0 kW. 12.0 – 18.0 kW. 33 A / 18 A. 260 – 480 V. 320 – 480 V. 48.1A/ 41.6A. 54.8A/ 47.5A. 60.1A/ 52.1A. 66.1A/ 62.5A. AWG 10 – AWG 2. < 2.5 %. My solar experience in site surveys, design, installations, and maintenance of 300 plus clients, specializing in off grid homes, and owning my own off grid home. Solar is part of my life and the bonus of meeting so many different clients needs, remains my quest to see more people enjoy their home with solar. I have taken advantage of my suppliers for the last 25 years to give you the best price I possibly can. If you dont find what you need on my site, please tell me what you need and I will do my best to get it for you. If you are new to solar and need help, feel free to reach out to me. I will be more than happy to design a system for your needs. Contact me at 207.280.0625 with your questions. The item "Fronius, Primo, 6.0Kw, 6,000 Watt, Wifi Grid Tie Inverter" is in sale since Saturday, June 17, 2017. This item is in the category "Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters". The seller is "everyonessolar" and is located in San Luis Obispo, California. This item can be shipped to United States, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Colombia, Panama, Jamaica.

Country/Region of Manufacture: United States
Brand: Fronius
Bundle Listing: No
Featured Refinements: Grid Tie Inverter
MPN: Primo 6.0-1

Category: fronius | Comments Off

November 15

Fronius, Primo, 10.0Kw, 10,000 Watt, Wifi Grid Tie Inverter

Fronius Primo Grid Tie Transformerless Inverters. The Fronius Primo single-phase inverters are the the ideal solar inverter for residential applications wth a 208/240 grid connection. The SnapINverter has many standard features, making it a convenient and “one-stop shop” for a high quality inverter. The hinge mounting system and lightweight inverter itself creates a streamlined installation process that can be done in under 15 minutes. Several industry-leading additions come standard with the Fronius Primo including Wi-Fi and SunSpec Modbus interfaces for seamless monitoring and datalogging, field proven Arc Fault Circuit Interruption (AFCI), and Fronius free online and mobile monitoring platform. The Fronius Primo is NEC 2014 compliant and ready for codes and standards of the future. AFCI protection shuts down the inverter in the event of an arc fault. Ground Fault Protection with Isolation Monitor Interrupter. DC Disconnect and DC reverse polarity protection. NEMA 4X enclosure offers ultimate protection from the elements – for indoor or outdoor installation. Dual MPPT allows for optimum productivity in designs with different roof orientations, shading of one or two strings, or the use of residual modules. Free, integrated Wi-Fi interface for datalogging allows user to connect to internet without additional BoS and grants the perfect overview of how the PV system is operating. Innovative SnapINverter mounting system makes installation and servicing extremely user-friendly and quick. The inverter is simply placed in the wall bracket and then secured. Field serviceable for lowest cost of ownership – no need to remove the entire inverter for servicing, just the power stage set compartment. All the cabling, settings and configurations remain in place. NEC 2014 compliant (with the easy implementation of the Fronius Rapid Shutdown Box) and Smart Grid Ready. 107.1-01 (September 2001) , UL1699B Issue 2 -2013, CSA TIL M-07 Issue 1 -2013. ELECTRICAL CHARACTERISTICS (3.8 – 8.2). Recommended PV power (kWp). 3.0 – 6.0 kW. 4.0 – 7.8 kW. 4.8 – 9.3 kW. 6.1 – 11.7 kW. 6.6 – 12.7 kW. Usable input current (MPPT 1 / MPPT 2). 18 A / 18 A. Admissable conductor size DC. AWG 14 – AWG 6. 240 – 480 V. 250 – 480 V. 270 – 480 V. Max Output Power (208/240V). Continuous Output Current (208/240V). 18.3A/ 15.8A. 28.8A/ 25.0A. 36.5A/ 31.7A. 38.0A/ 34.2A. Recommended OCPD/AC breaker size (208/240V). Admissable conductor size AC. ELECTRICAL CHARACTERISTICS (10.0 – 15.0). 8.0 – 12.0 kW. 9.1 – 13.7 kW. 10.0 – 15.0 kW. 12.0 – 18.0 kW. 33 A / 18 A. 260 – 480 V. 320 – 480 V. 48.1A/ 41.6A. 54.8A/ 47.5A. 60.1A/ 52.1A. 66.1A/ 62.5A. AWG 10 – AWG 2. < 2.5 %. My solar experience in site surveys, design, installations, and maintenance of 300 plus clients, specializing in off grid homes, and owning my own off grid home. Solar is part of my life and the bonus of meeting so many different clients needs, remains my quest to see more people enjoy their home with solar. I have taken advantage of my suppliers for the last 25 years to give you the best price I possibly can. If you dont find what you need on my site, please tell me what you need and I will do my best to get it for you. If you are new to solar and need help, feel free to reach out to me. I will be more than happy to design a system for your needs. Contact me at 207.280.0625 with your questions. The item "Fronius, Primo, 10.0Kw, 10,000 Watt, Wifi Grid Tie Inverter" is in sale since Saturday, June 17, 2017. This item is in the category "Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters". The seller is "everyonessolar" and is located in San Luis Obispo, California. This item can be shipped to United States.

Country/Region of Manufacture: United States
Brand: Fronius
Bundle Listing: No
Featured Refinements: Grid Tie Inverter
MPN: Primo 10.0-1

Category: fronius | Comments Off

November 8

2.8 KW Solar Panel With 3000 watt Grid Tie Inverter 10 Panels

10 Solar Panels 280 Watt. INNOVATION AND EXCELLENT PERFORMANCE. The new high-performance module Q. PLUS BFR-G4.1 is the ideal solution for all applications thanks to its innovative Q. The world-record cell design was developed to achieve the best performance under real conditions – even with low radition intensity and on clear, hot summer days. 1 SMA 3000 Watt Grid Tie Inverter. SMA Sunny Boy 3.0-US Standard with Disconnect. The Sunny Boy-US series features a wealth of improvements and joins SMA? S lineup of field-proven solar technology backed by the world? S #1 service team. S first Secure Power Supply now delivers up to 2,000 W of opportunity power when the grid goes down and the sun is shining. Installation has never been easier thanks to SMA? S Installation Assistant, direct access via smartphone, and integrated DC disconnect. S multiple independent input channels, each with SMA? Global Peak, mean hundreds of stringing configurations for flexible system design while solving the challenges of complex roofs and shading. Same Name, New Game. The residential PV market is changing rapidly, and we understand that your bottom line matters more than ever. Ve designed a superior residential solution that will help you decrease costs throughout all stages of your business model. Read on to see how the Sunny Boy-US is once again raising the bar by offering improved performance, enhanced features, and most importantly, cost savings across the entire spectrum of residential installation processes. Reduce your costs across all residential PV business operations. Speed the completion of customer proposals and maximize the efficiency of your design team with the Sunny Boy-US series, which provides a new level of flexibility in system design by offering. Hundreds of stringing configurations. Global Peak shade mitigation technology. Diverse application options including on- and off-grid compatibility. Streamlined Installation & Commissioning. Expedite your operations in the field by taking advantage of the new Sunny Boy? S installer-friendly feature set including. Direct access via smartphone and utilization of SMA? S Installation Assistant, which minimizes time/labor spent in the field and speeds the path to commissioning. Improved communication capabilities that remove the need to install additional equipment. Integrated DC disconnect that simplifies onsite logistics and eliminates the need to install a separate disconnect unit, speeding overall installation time. SMA understands the factors that contribute to lifetime PV ownership cost, that? S why the Sunny Boy-US was designed for maximum reliability and backstopped by an unmatched service offering. Enhanced AFCI technology that improves resistance against false tripping while improving sensitivity in detecting real arcs, which greatly reduces unneeded service calls and increases safety. The new Sunny Boy? S two-part enclosure concept that separates the connection unit from the power unit, which allows for simple, expedited servicing. The #1 Service team in the PV industry, as recognized by IMS research, with experience servicing an installed base of more than 40 GW. The item “2.8 KW Solar Panel With 3000 watt Grid Tie Inverter 10 Panels” is in sale since Monday, October 30, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Solar Panels”. The seller is “mcdonaldent” and is located in Scottsdale, Arizona. This item can be shipped to United States.

Brand: Unbranded
MPN: Does Not Apply

Category: solar | Comments Off

November 2024
M	T	W	T	F	S	S
« Oct
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30