2000W Battery Discharge Power Mode/MPPT Solar Grid Tie Inverter Pure Sine Wave

2000W Battery Discharge Power Mode/MPPT Solar Grid Tie Inverter 2KW with Limiter Sensor DC 45-90V AC 220V 230V 240V PV connected. 2000w Grid Tie Inverter for Solar Panels or Battery. Working well with all kinds of Battery. With internal Limiter / Wi-Fi connection. Input voltage Range : 45V-90V. Output Voltage : 220V 230V 240V. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter, this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Wi-Fi Function for monitor the solar plant on App or Website. Wifi Port for MPPT 2000W NEW SUN Solar Grid Tie Inverter. Input DC Voltage Range. Peak power tracking voltage. AC Output Voltage Range. Dimensions (W x H x D). How to use the Inverter? Standard Grid Tie Inverter Model. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. All excess power that is not needed by the load is then exported to the Grid. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Using Grid Tie Inverter With Limiter Model. 2.1 The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. 2.2 The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. 2.3 The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. Installation of GTIL With Internal Limiter. 3.1 This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. 3.2 External protective device including dc and ac SPD(Surge protection device), dc and ac breaker, etc is recommended to installed in the system. Limiter Setting on the LCD of the inverter. The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. 5 Battery Discharge Power Mode. 6 Limiter Module Specification. Clamp sensor- Max 100A. Clamp sensor signal- 5v AC max mA. DC signal Cable- 5v DC, max mA. Max 13mm or 0.51in cable. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “top.creative.shop” and is located in this country: CN. This item can be shipped worldwide.

Features: All Daylight Conditions, Automatic Voltage Detection
Standby Power Consumption: <0.5W
Custom Bundle: No
Protection Properties: Black Current Protection, Discharge Protection, Freeze Protection, Frost Protection, Low Voltage Protection
Wire Gauge: As Show
Power Factor: 0.99
Voltage: 45V ~ 90V
Connector Configuration: As Show
Item Length: As Show
Over Current Protection: Yes
Shipping: Free
Power Source: Solar
Size: 434x196x88 mm
Country/Region of Manufacture: Hong Kong
Material: As Show
Weight ( Kg): 4.6kg
Recommended Environment: Indoor/Outdoor
Anti-Island Protection: Yes
Model: 2021
Maximum Input Voltage: As Show
Output Frequency: 46Hz~65Hz
Charging Mode: MPPT (Maximum Power Point Tracking)
Peak Inverter Efficiency: 92%
Wattage: 1920W
Application: Agriculture/Farming, Aquaculture, Automotive, Back-Up Power, Camping/Hiking, Commercial, Electronics, Home/Garden, Marine
MPPT Function: Yes
Reverse Polarity Protection: Yes
Current Rating: As Show
Current Type: AC/DC
Current Output: As Show
Power: 2000W
Stackable: Yes
Output Wave Form: Pure Sine Wave
System Configuration: Grid-Tie
Maximum Flow Rate: As Show
Resistance Properties: Corrosion Resistant, Dust Resistant, Fade Resistant
Brand: Unbranded
Inverter Technology: Battery-Based
Color: Blue
Total Harmonic Distortion: <5%
Type: Charger/Inverter
Over Temperature Protection: Yes

Category: 2000w | Comments Off

August 8

Solar Grid Tie Inverter 50HZ60HZ Panel MPPT Function 110V/220V Pure Sine Wave

Solar Grid Tie Inverter 50HZ60HZ Panel MPPT Function 110V/220V Pure Sine Wave. Noted:Please connect the AC mains power first, and then connect the DC Solar panel input. Input voltage range: 10.5V to 28V/ 22V to 50V. Solar Panel: Recommend using the power more than 30W and the standard voltage of 17.5V PV panel for GTI-1000. Recommend using the power more than 60W and the standard voltage of 35V PV panel for WV-1000. Recommend using multiple solar panels. Solar panel in series will result in high-input voltage which will exceed the working voltage range of the inverter. Voltage range of the inverter whose output is 220V AC. Voltage range of the inverter whose output is 110V AC. Directly connected to the solar panels (do not need to connect the battery). Using precise MPPT function, APL functions, the inverter automatically adjust the solar panels of maximum output power, simply connect the solar panel to the grid inverters. Do not need to connect the battery. AC 0 angle with high precision auto-detection. AC phase angle of 0 through isolation amplifier then input to the MCU for high-precision detection and analysis. The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together. In the process of the grid, usually adapt the same phase angle in parallel. Ie, When the two-phase alternating current total is equal to 0. Use switch to combination the two AC fusion and the product is rectified AC half-frequency AC to 100Hz first, then the machine use the high frequency current in the circuit and semi-100Hz frequency alternating current generated combination, to achieve high-frequency modulation. Pure Sine Wave Output. Use SPWM directly to make pure sine wave output. Automatic Sensing Function Solar Luminosity. Use the latest luminosity perception operation technology. The different illuminate angle and intensity of the solar panel will produce different current output. Use advanced CPU to operate the different illuminance and the data can be directly displayed on the LCD. Then you can visually see the sense of the strength of the sun unit. Power Automatically Locked (APL). In different current fluctuations, we should use the MPPT function. When the MPPT function adjusted to the maximum power point, the product automatically powers locked in maximum power point, then made the output power more stable. Maximum Power Point Tracking (MPPT). Because the current intensity and the voltage changes at any time, if there is no power point tracking, there will be a lot of problems. In the past time, usually adopt a solar controller, but this product uses high-precision MPPT operation power, automatic and immediate adjust the solar panels output power at the maximum output point, then achieve a stable output purposes. Automatically Adapt To Different Load Power Factor. Adapt to any of the power load. Constant Current, Constant Power. This product is constant current, constant output power, without any overload, over-current phenomenon. Automatically Shut Down When The Power Output Of a Fault. When the city power system is in failure, the inverter will automatically turn off the output. Current Limit Protection:Current limit. Multiple small power inverters in parallel can achieve large output power. High-Frequency High Conversion Rate:Adapt high frequency converter, the output more efficient. Red terminal: Connect DC positive, black terminal: Connect DC negative. Show in figure 1. AC socket: Connect to the mains. Put the side of the AC cord, which has holes into the inverter with 3 foot, outlet and the other side of the AC cord to home 3PIN AC outlet. Show in figure 2. Figure 2 Figures 3. Low-voltage protection (input DC voltage is less than 10.5VDC). Over-voltage protection (Input DC voltage is greater than 28.5VDC). Over-temperature protection when the chassis temperature is above 75? The temperature dropped about 2-10 minutes to restart automatically after cooling. Fault Protection (when 110VAC or 220VAC power outage or shutdown). Islanding protection: When the electric supply stop, the inverter automatically shut down output. Green LED flashing: The inverter is adjusting power output. MPPT is in working condition. Green LED long in time: The inverter is in working condition with the maximum output power. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “audosta” and is located in this country: CN. This item can be shipped worldwide.

Color: 1000
Input Voltage: 10.5-28VDC
Output Voltage: 180-260VAC 50HZ60HZ
Size: 394*209*117mm
Current Rating: Other
Inverter Technology: Microinverter
Model: 0437681908
Country/Region of Manufacture: China
Custom Bundle: No
Max.input current: 65A
Output Frequency: 50HZ60HZ
Output Power: 500 – 1000W
Current Type: AC/DC
System Configuration: Grid-Tie
Material: Other
Power Source: Solar
Type: DC/AC Inverters
Features: Durable
MPN: 0437681933
Item Length: Standard
Power: 1000W
Current Output: Other
Brand: Unbranded
Application: Agriculture/Farming
Charging Mode: MPPT (Maximum Power Point Tracking)
Output Type: Single
Recommend use solar panels: 1250W
Weight: 2.7kg
AC Frequency range: 55HZ~63HZ/45HZ~53HZ
AC Output Voltage: 110V/220V
DC Input Voltage: 10.5-28V/22-50V
Humidity: 0~99%
Resistance Properties: Other
Voltage: Other

Category: solar | Comments Off

August 2

Wind Turbine Solar Inverter 1000W Off Grid Tie Pure Sine Wave Battery Inversor

Wind Turbine Solar Inverter 1000W Off Grid Tie Pure Sine Wave Battery Inversor. The is a device that converts direct current (DC from storage battery, solar and wind power) into alternating current (AC). It consists of a bridge, control logic and line circuit. This use high-frequency power conversion technology, and use the ferrite transformer instead the old bulk silicon steel transformer. That is why this inverter is lighter, smaller than other similar. Product and the output waveform are pure sine wave. About Pure sine wave. It outputs pure sine wave alternating current that is the same as or better than the grid we use every day, because it does not have electromagnetic pollution in the grid. The sine wave provides high-quality alternating current and can drive any kind of load, but the technical requirements and cost are high. About inductive load In layman’s terms, that are, high-power electrical products made using the principle of electromagnetic induction, such as motors, compressors, relays, and so on. This type of product requires a starting current that is much larger (approximately 5-7 times) than the current need to maintain normal operation. For example, a refrigerator that consumes about 150 watts during normal operation can make a starting power of more than 1,000 watts. In addition, because the inductive load generates a back electromotive force voltage at the moment of turning on the power or turning off the power, the peak value of this voltage is much larger than the voltage value that the inverter can withstand, and it is easy to cause the transient overload of the inverter, Therefore, this type of electrical appliance has higher requirements on the power supply waveform. Solar and wind power system which supply AC and DC power For lamp, electric cooker, desktop computer, notebook computers, computer monitors, fax, printers, LCD TVS, Fan, DVD, mobile phones, digital products, drill, electric irons, and other original equipment usable electricity. (Inductive appliances must follow the above regulations). Optional: 12/24/48/72/96VDC(1000w designed 12/24v auto match). Color Cables with round fixed ferrule(Positive-Red; Negative-Black). Pure sine wave and soft star. THD 3%(Linear Load). Battery: Voltage, Remaining battery power, battery connected. Protection:Over voltage, low voltage, over load, over temperature, under protection, output load percent, normal working. AC load: voltage, freqency, power on. Remote switch:Remaining battery power, battery connected, power on. 1Standard :US, EU socket; 2Optional: Japan, UK, Australia, France, Universal, Charging socket. Low voltage, over voltage. Shut off output automatically. Intelligent colling fan>45? EN161000-3-2, EN61000-3-3, EN 55024. Installation connection steps: please refer to the above connection diagram. First of all, turn off the switch. Respectively take the red color and black color DC cables to connect with the negative (black terminal) and positive (red terminal) of the batteny. Then turn on the inverter’s switch to check whether it can be started normally. If steps 3 is ok, please connect the plug of the electrical appliance to inverter’s socket. Final to turn on the inverter’s switch again. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “audosta” and is located in this country: CN. This item can be shipped worldwide.

Color: Black
Input Voltage: 12 24VDC auto
Output Voltage: 230V(190-260VAC)
Size: Standard
Current Rating: Other
Inverter Technology: Microinverter
Model: Other
Country/Region of Manufacture: China
Maximum Input Power: 1000W
Custom Bundle: No
Current Type: AC/DC
System Configuration: Off-Grid
Maximum Input Voltage: 24V
Power Source: Wind
Type: Charger/Inverter
Features: Durable
MPN: 657437865
Recommended Environment: Indoor/Outdoor
Item Length: Standard
Protection Properties: Other
Power: 1000W
Current Output: Other
Brand: Unbranded
Application: Agriculture/Farming
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Other
Voltage: 12V 24V

Category: wind | Comments Off

August 1

Solar Panel Inverter Grid Tie 1000W 18V MPPT Function Durable Pure Sine Wave

SOLAR PANEL INVERTER GRID TIE 1000W 18V MPPT FUNCTION DURABLE PURE SINE WAVE. Noted: Please connect the AC mains power first, and then connect the DC Solar panel input. Input voltage range: 10.5V to 28V/ 22V to 50V. Solar Panel: Recommend using the power more than 30W and the standard voltage of 17.5V PV panel for GTI-1000. Recommend using the power more than 60W and the standard voltage of 35V PV panel for WV-1000. Recommend using multiple solar panels. Solar panel in series will result in high-input voltage which will exceed the working voltage range of the inverter. Voltage range of the inverter whose output is 220V AC. Voltage range of the inverter whose output is 110V AC. Directly connected to the solar panels (do not need to connect the battery). Using precise MPPT function, APL functions, the inverter automatically adjust the solar panels of maximum output power, simply connect the solar panel to the grid inverters. Do not need to connect the battery. AC 0 angle with high precision auto-detection. AC phase angle of 0 through isolation amplifier then input to the MCU for high-precision detection and analysis. The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together. In the process of the grid, usually adapt the same phase angle in parallel. Ie, When the two-phase alternating current total is equal to 0. Use switch to combination the two AC fusion and the product is rectified AC half-frequency AC to 100Hz first, then the machine use the high frequency current in the circuit and semi-100Hz frequency alternating current generated combination, to achieve high-frequency modulation. Pure Sine Wave Output. Use SPWM directly to make pure sine wave output. Automatic Sensing Function Solar Luminosity. Use the latest luminosity perception operation technology. The different illuminate angle and intensity of the solar panel will produce different current output. Use advanced CPU to operate the different illuminance and the data can be directly displayed on the LCD. Then you can visually see the sense of the strength of the sun unit. Power Automatically Locked (APL). In different current fluctuations, we should use the MPPT function. When the MPPT function adjusted to the maximum power point, the product automatically powers locked in maximum power point, then made the output power more stable. Maximum Power Point Tracking (MPPT). Because the current intensity and the voltage changes at any time, if there is no power point tracking, there will be a lot of problems. In the past time, usually adopt a solar controller, but this product uses high-precision MPPT operation power, automatic and immediate adjust the solar panels output power at the maximum output point, then achieve a stable output purposes. Automatically Adapt To Different Load Power Factor. Adapt to any of the power load. Constant Current, Constant Power. This product is constant current, constant output power, without any overload, over-current phenomenon. Automatically Shut Down When The Power Output Of a Fault. When the city power system is in failure, the inverter will automatically turn off the output. Current Limit Protection:Current limit. Multiple small power inverters in parallel can achieve large output power. High-Frequency High Conversion Rate:Adapt high frequency converter, the output more efficient. Red terminal: Connect DC positive, black terminal: Connect DC negative. Show in figure 1. AC socket: Connect to the mains. Put the side of the AC cord, which has holes into the inverter with 3 foot, outlet and the other side of the AC cord to home 3PIN AC outlet. Show in figure 2. Figure 2 Figures 3. Low-voltage protection (input DC voltage is less than 10.5VDC). Over-voltage protection (Input DC voltage is greater than 28.5VDC). Over-temperature protection when the chassis temperature is above 75? The temperature dropped about 2-10 minutes to restart automatically after cooling. Fault Protection (when 110VAC or 220VAC power outage or shutdown). Islanding protection: When the electric supply stop, the inverter automatically shut down output. Green LED flashing: The inverter is adjusting power output. MPPT is in working condition. Green LED long in time: The inverter is in working condition with the maximum output power. In order to achieve higher power use requirements, this product can be stacked, such as: 4-grid inverter1000W stacking can achieve 4000W. And the number of the stacking is unlimited. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “gintarelis-7″ and is located in this country: CN. This item can be shipped worldwide.

Colour: 1000
Input Voltage: 10.5-28VDC
Output Voltage: 180-260VAC 50HZ60HZ
Current Output: 65A
System Configuration: Grid-Tie
Power Source: Solar
Inverter Technology: Microinverter
Color: Multicolor
Custom Bundle: No
Maximum Flow Rate: 0.6-1 GPM (2.3-3.8 L/min)
Material: Other
MPN: 876908789
Brand: Unbranded
Type: Charger/Inverter
Current Type: AC/DC
Voltage: DC 10.5~28V to AC 220/110V
Model: Other
Recommended Environment: Indoor/Outdoor
Features: Durable
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Other
Country/Region of Manufacture: China
Application: Agriculture/Farming
Power: 1000W

Category: solar | Comments Off

July 30

1400W Grid Tie Inverter MPPT DC22-50V to AC110V Solar Pure Sine Wave Inverter

1000W MPPT Function Micro On Grid Tie Inverter 110V Used for 12V Solar Panel. 1000W Grid Tie Inverter MPPT Stackable DC20-45V to AC110V Pure Sine Wave Inverte. 600W Grid Tie Inverter MPPT Stackable DC20-60V to AC110V Pure Sine Wave Inverter. 600W Grid Tie Pure Sine Wave Inverter 110V Used for 12V Solar Panel/24V Battery. MPPT 600W Solar Grid Tie Micro Inverter DC22-60V to AC110V for 24V/36V PV Panel. 2000W MPPT Grid Tie Inverter with Power Limiter Stackable DC45-90V to AC190-260V. 1000W MPPT Solar Grid Tie Inverter with Power Limiter Sensor DC 45-90V / 26-60V. 1000W MPPT Grid Tie Inverter DC10.8-30V to AC110V Solar Pure Sine Wave Inverter. 1000W Grid Tieinverter DC20-45V AC110V for 30V/36V PV Panel Solar Inverter MPPT. 1300W Grid Tie Inverter AC110V for 12V Solar Panel Pure Sine Wave Micro Inverter. 1300W Solar Grid Tie Pure Sine Wave Micro Inverter DC20-45V for 30V/36V PV Panel. 300W 600W Solar Grid Tie Inverter MPPT Pure Sine Wave DC18-50V For 36V PV Panel. 600W Solar Grid Tie Micro Inverter MPPT Pure Sine Wave DC11-32V In to AC110V Out. 2000W Solar Grid Tie Inverter with Power Limiter Sensor DC45-90V to AC190-260V. 1400W MPPT Grid Tie Inverter DC22-50V to AC110V Solar Pure Sine Wave Inverter. 1400W Solar Grid Tie Inverter, MPPT Pure Sine Wave Inverter. DC22-50V to AC110V(90-140V). MPPT Range: 26V – 36V. Solar Panel Voltage: Vmp30-39V; Voc38-46V. This grid tie inverter cannot be used as off grid/stand alone solar system. The output need to be connected to the grid power. Can not supply power directly to the AC loads. DO NOT use solar controller load ports to connect to the inverter. Smart Grid Tie inverter is a compact unit, which directly converts direct current into alternating current for powering appliances and/or office equipments and connecting to utility grid. Smart Micro inverter specially optimized design to work with modularization of DC power supplies which includes the mainstream solar modules. 24V(60 cells) and 36V (72cells). Moncrystal and/or polycrystalline solar panels and batteries. Distributed modularization design philosophy for smart micro inverter insures the productiveness of the whole system and will not affect by a single point of failure. Each Smart Micro inverter is individually connected to each PV module in the array. This unique configuation means that an individual Maximum Peak Power Point Tracker(MPPT) controls each PV modules in the array which may be affected by shading, soiling, orientation or mismatch, etc. Smart Micro inverter insures top performance for maximizing energy production from the whole PV system and gets return on investment in less time. Advantages of Smart Microinverter. Unique circuit design, choice of import industrial electronic components, higher efficiency, more stable performance. Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more reliable. Parallel type design for DC input and modularization design for inverter, small volume, distributed installation, easy for system configuration, flexible for combination, strong expansibility of system. Adopting high-frequency isolation transformer type, high efficiency, and high security. Perfect electrical protection function. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion. Getting electronic circuit design, appearance design and other core technology patents. 120V(90-140V) or 230V(190-260V). How to match the inverter with solar panels and batteries. Inverter work with solar panels. 10.8-32VDC range is for 36cells-Vmp:18-21V:Voc:20-24V solar panels. 22-50VDC range is for 60cells-Vmp:26-30V:Voc:34-38V or 72cells-Vmp:35-39V:Voc:42-46V. This range can suitable for two version solar panels. Inverter work with battery. If you want to use this grid tie inverter for battery, then please use 24VDC battery with 10.8-32VDC inverter. 36VDC battery with 22-50VDC inverter. Because this inverter is designed for solar panels which with MPPT function. So we don’t very suggest customers to use it for battery. It may short the inverter service life. If use a battery to power the inverter, please use a circuit breaker. What’s In Box. 1 x 1400W Grid Tie Inverter. 1 x English User’s Manaul. 1 x AC Cord(US/UK/EU/AU). Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods. (Only for Business Express). Feedback is very important to us. Please do not give us any bad feedback. If you can do as we say, we will be very grateful. Please give us the opportunity to resolve any problem. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “eprec-us” and is located in this country: CN. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Mexico, Brazil, Australia.

Model: 1400W Grid Tie Inverter
MPPT Voltage: 26-36VDC
Rated Power: 1400W
Solar Panels: 60cells / 72cells ; 30V/36V
Brand: Y&H
Application: Home/Garden
Inverter Technology: Microinverter
Country/Region of Manufacture: China
System Configuration: Grid-Tie
Power Source: Solar
Charging Mode: MPPT (Maximum Power Point Tracking)
AC Output: 110V(90-140V)
Certification: CE RoHS
DC Input Range: 22V-50V
Frequency: 50Hz-60Hz Auto
Lademodus: MPPT (Maximum Power Point Tracking)

Category: 1400w | Comments Off

July 28

Solar Grid Tie Inverter 2Independent MPPT Circuits WIFI Pure Sine Wave Connect

Solar Grid Tie Inverter 2Independent MPPT Circuits WIFI Pure Sine Wave Connect. DC input power (W):6300. DC input voltage (V):600. Starting voltage (V):120V. Opration voltage (V):100V. MPPT Range(V):120-550V. Number of MPPT /String per MPPT:2/1. DC current (A) Per MPPT x Number of MPPT: 16×2. Rated output power (W):6000W. AC output current(A):26. Nominal output voltage (V)/frequency:230, L+N+PE, 50Hz/60Hz. Power factor:=0.99 (at rated power). MPPT efficiency:99.90%. Protection:DC breaker, AC short-circuit protection, Over current protection, Overvoltage protection, isolation protection, (RCD), Surge protection. Anti-island protection, Over-temperature protection, Ground fault monitoring, etc. Cooling method:Natural cooling. Operating temperature range:-25? Display:LED(standard)/LCD(optional). LCD language:English, Chinese, German, Dutch. Communication interface:RS485 (standard) ;WiFi, Ethernet(optional). Dimension (H x W x D mm):462x360x150. DIN VDE 0126-1-1:2013, VDE-AR-N 4105:2011, DIN VDE V 0124-100:2012. G83-2:2012, G59/3-2:2015, IEC 61727 (IEC62116), AS/NZS 4777.2:2015. IEC 60068-2-14:2009, IEC 60068-2-30:2005, IEC 61683:1999. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “power2017″ and is located in this country: CN. This item can be shipped worldwide.

Color: MG6KTL-2M
Input Voltage: 120V-550VDC
Output Voltage: 220-240V
Socket Type: With CT
Size: 462x360x150mm
Current Rating: Other
Inverter Technology: Microinverter
Model: 2814546916
Country/Region of Manufacture: China
Max.Efficiency: 97.80%
Custom Bundle: No
MPPT Range: 120-550V
Nominal Output Voltage: 230VAC
Output Frequency: 50HZ60HZ
Output Power: 1 – 200KW
Current Type: AC/DC
System Configuration: Grid-Tie
Material: Other
Power Source: Solar
Type: DC/AC Inverters
Features: Durable
MPN: 2814546942
Recommended Environment: Indoor/Outdoor
Item Length: Standard
Power: Other
Current Output: Other
Brand: Unbranded
Application: Agriculture/Farming
Charging Mode: MPPT (Maximum Power Point Tracking)
Output Type: Single
Protection Rating: IP65
Rated Output Power: 6000W
Warranty: 5years
Weight: 21KG
Is_customized: Yes
Max.DC Input Voltage: 600V
Resistance Properties: Other
Voltage: 180-800VDC to AC380V

Category: solar | Comments Off

July 22

Solar Grid Tie Micro Inverter 1200W MPPT Pure Sine Wave 22V-60V to 80-260V 110V

Solar Grid Tie Micro Inverter 1200W MPPT Pure Sine Wave 22V-60V to 80-260V IP65. Efficiently turns sunlight into clean and green power. Our solar grid tie micro inverter employs MPPT technology, reverse power transmission, and digital control. It is designed to provide sufficient power to drive various household appliances. Moreover, it has a prolonged service life given its IP65 waterproof design and aluminum alloy structure. The first step on the sustainable energy path is energy conservation, and this inverter aims at achieving exactly this. The robust MPPT algorithm can automatically track the power points and increase the power generation by 25%. With a real-time monitoring system, it can help you monitor power generation efficiency and reduce workforce expenses. Stable Dual Channel Technology? This inverter adopts the Dual Channel Circuit Technology, which means two photovoltaic panel inputs can share one MPPT system that keeps the power output and transmission stability. When working, these two channels will never interfere with each other while tracking the maximum power point, which efficiently makes the power transmission rate up to 99.9%. The digital SPWM control technology is characterized by strong anti-interference ability, fast calculation speed, high intelligent degree, high control precision, and excellent output waveform. IP65 & Aluminum Material? Introducing IP65 waterproof appearance design and aluminum alloy material, it is safe and reliable. Multiple protection functions are provided to prolong service life. Lightweight and easy to install, many inverters can be stacked arbitrarily to form a single-phase parallel stacking system. It is simple, whether installation or maintenance. It is suitable for various household appliances. It can convert the DC power generated by solar panels into AC power available for household appliances. Working time means 5 days a week, not including saturday and sunday. A and west EU country, which will takes not over than 2 we. West Eu country as russi. West EU country: 10. East European country: 20-30workin. If you have any questions. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “biggoods88″ and is located in this country: CN. This item can be shipped worldwide.

Current Output: 10 A or Less
System Configuration: Grid-Tie
Power Source: Solar
Output Type: Single
Color: Silver
Wattage: 1200W
Brand: Unbranded
Voltage: 22V-60V
Recommended Environment: Outdoor
Wave Form: Pure sine wave
Communication Mode: 433MHz/WiFi
Power factor: >95%
Charging Mode: MPPT (Maximum Power Point Tracking)
Country/Region of Manufacture: China
Output Voltage: 220VAC/120VAC for optional
Certificate: CEC,CE ,INMETOR,ETL,Patented technology

Category: solar | Comments Off

July 21

Solar Grid Tie Inverter Pure Sine Wave Output Limiter Sensor Wifi Monitoring

Solar Grid Tie Inverter Pure Sine Wave Output Limiter Sensor Wifi Monitoring. Max Efficiency of 97.3% and wide input range. MPPT design with precise MPPT algorithm. Natural cooling, IP65 protection. Compact and light design for easy Installation. With build in Anti-overflow function. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “audosta” and is located in this country: CN. This item can be shipped worldwide.

Color: 3KW
Input Voltage: 120VDC-500VDC
Output Voltage: 230VAC
Socket Type: With WIFI-Limiter
Size: 330*347.5*127mm
Current Rating: Other
Inverter Technology: Microinverter
Model: 4412324466
Country/Region of Manufacture: China
Rated Grid Frequency: 50HZ60HZ
Custom Bundle: No
Weight: 7kg
Ingress Protection: IP65
Is_customized: Yes
Max.DC Input Voltage: 500V
Max.DC Input Current: 10A
MPPT Efficiency: >99%
Current Type: AC/DC
System Configuration: Grid-Tie
Material: Other
Power Source: Solar
Type: DC/AC Inverters
Features: Durable
MPN: 4412324496
Recommended Environment: Indoor/Outdoor
Item Length: Standard
Power: 3000W
Current Output: 10A
Brand: Unbranded
Application: Home/Garden
Charging Mode: MPPT (Maximum Power Point Tracking)
MPPT Operating Range: 100-500V
Operating Phase: Single Phase
Output Current: 14A
Output Frequency: 50hz60hz
Output Power: >1000KW
Output Type: Single
Rated AC Grid Voltage: 230V
Resistance Properties: Other
Voltage: 120V-500VDC Input 230VAC

Category: solar | Comments Off

July 20

Solar Grid Tie Inverter 3KW Pure Sine Wave Limiter Sensor Wifi Plug Monitoring

Solar Grid Tie Inverter 3KW Pure Sine Wave Limiter Sensor Wifi Plug Monitoring. Max Efficiency of 97.3% and wide input range. MPPT design with precise MPPT algorithm. Natural cooling, IP65 protection. Compact and light design for easy Installation. With build in Anti-overflow function. EN50438, IEC61727, VDE4105 NB/T32004(CQC), IEC62109-1-2. IEC62109-1/-2, NB/T 32004, EN61000-6-1, EN61000-6-3. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “audosta” and is located in this country: CN. This item can be shipped worldwide.

Color: 3KW WIFI-Limiter
Input Voltage: 120VDC-500VDC
Output Voltage: 230VAC
Size: 330*347.5*127mm
Current Rating: Other
Inverter Technology: Microinverter
Model: 7353783061
Country/Region of Manufacture: China
Rated Output Power: 3000W
Custom Bundle: No
Weight: 7kg
AC Output Voltage: 230VAC
Is_customized: Yes
Max.DC Input Current: 10A
Wattage: 3kW
Max.DC Input Voltage: 500VDC
MPPT Efficiency: >99%
Current Type: AC/DC
System Configuration: Grid-Tie
Material: Other
Power Source: Solar
Type: DC/AC Inverters
Features: Durable
MPN: 7353783084
Recommended Environment: Indoor/Outdoor
Item Length: Standard
Power: Other
Current Output: 14A
Brand: Unbranded
Application: Agriculture/Farming
Charging Mode: MPPT (Maximum Power Point Tracking)
MPPT Operating Range: 100-500V
Operating Phase: Single Phase
Output Current: 14A
Output Frequency: 50hz60hz
Output Power: >1000KW
Output Type: Single
Rated Grid Frequency: 50HZ60HZ
Resistance Properties: Other
Voltage: 120V-500VDC Input to 230VAC Output

Category: solar | Comments Off

July 13

Solar Grid Tie Inverter 5000W Pure Sine Wave Limiter Sensor Wifi Plug Monitoring

Solar Grid Tie Inverter 5000W Pure Sine Wave Limiter Sensor Wifi Plug Monitoring. Max Efficiency of 97.3% and wide input range. MPPT design with precise MPPT algorithm. Natural cooling, IP65 protection. Compact and light design for easy Installation. With build in Anti-overflow function. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “audosta” and is located in this country: CN. This item can be shipped worldwide.

Color: 5KW
Input Voltage: 120VDC-500DC
Output Voltage: 230VAC 50HZ60HZ
Socket Type: Only Inverter
Size: 43.5*42.5*27.5mm
Current Rating: Other
Inverter Technology: Microinverter
Model: 9925860524
Country/Region of Manufacture: China
Custom Bundle: No
MPPT Operating Range: 100-500V
Operating Phase: Single Phase
Output Current: 24A
Output Frequency: 50hz60hz
Output Type: Single
Rated AC Grid Voltage: 230V
Current Type: AC/DC
System Configuration: Grid-Tie
Material: Other
Power Source: Solar
Type: DC/AC Inverters
Features: Durable
MPN: 9925860547
Recommended Environment: Indoor/Outdoor
Item Length: Standard
Power: 5000W
Current Output: Other
Brand: Unbranded
Application: Agriculture/Farming, Home/Garden
Charging Mode: MPPT (Maximum Power Point Tracking)
Rated Grid Frequency: 50HZ60HZ
Rated Output Power: 5000W
Weight: 10.4kg
Ingress Protection: IP65
Is_customized: Yes
Mac.DC Input Voltage: 500V
Max.DC Input Current: 10A
Resistance Properties: Other
Voltage: Other

Category: solar | Comments Off

January 2025
M	T	W	T	F	S	S
« Dec
		1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	31