700w Solar Grid Tie Micro Inverter for 30v/36v Solar Panels Waterproof IP65 USA

700w Solar Grid Tie Micro Inverter for 30v/36v Solar Panels Waterproof IP65 USA. An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This micro inverter makes it easier. Made of fine aluminum alloy, this IP65 waterproof inverter has a wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. The inverter is made of aluminum alloy, which is durable, corrosion-resistant, and not easy to rust. You can use it for a long time without frequent replacement, and your cost can be saved. The inverter has built-in high-precision maximum power point tracking, which can optimize the power collection from the solar panel, accurately capture and lock the maximum output power point, and greatly increase power generation to more than 25%. In addition, the efficient power reverse transmission technology can transmit the power that can not be used up to the grid in the reverse direction to other places for use, and the power transmission rate can reach 99.9%. The inverter is equipped with an LCD display screen to monitor voltage, power, frequency, current, etc. So you can see the machine clearly in operation. The inverter adopts intelligent soft switching technology, high-frequency switching power supply technology, and 32-bit DSP full digital SPWM control technology, making the product strong anti-interference ability, fast operation speed, high intelligence, and a powerful functional system, which can meet the needs of users. The output and input of the system are completely electrically isolated, the insulation performance of the entire power distribution system is good, and the fully isolated booster circuit is safer and more reliable. The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. Besides, the IP65 waterproof design can prevent rain from eroding its surface, so you can use it with confidence. After the installation of the power station, you don’t need to do maintenance work. After a long period of use, you only need to remove the dust from the photovoltaic panel. With a size of 8.392.289.84inch, the inverter adopts high-frequency telephone, micro processing, and other technologies, so it is smaller, lighter, and won’t occupy too much space. During installation, you can stack multiple inverters at will, form a single-phase parallel stacking system, or conveniently form a three-phase system to provide a three-phase AC. We have been working hard to provide better service and quality for our customers, which is our goal. If there is any quality problem with our inverters. The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. The inverter is provided with heat dissipation holes, which can play a good role in heat dissipation and prolong the service life of the inverter. This product is applicable to 30V or 36V solar panels, 36V batteries. The inverter can be widely used in residential or commercial areas for turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter. Step 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. Plug Type: US Standard. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50V. Maximum DC Short Circuit Current: 40A. Maximum Input Operating Current: 30A. Output Peak Power: 700watt. Rated Output Power: 650watt. Rated Output Current: 6.36A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Number of Circuit Connections Per String: 6. Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 2.48kg/5.47lbs. Net Weight: 1.63kg/3.59lbs. Product Size: 21.35.825cm/8.392.289.84inch. Package Size: 342411.5cm/13.399.454.53inch. 1 Solar Grid Tie Micro Inverter. Other Accessories for Installation. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Applicable to 30V or 36V solar panels, 36V batteries. LCD Display, Digital Control, Electrical Isolation, Safety Guard, Flexible Installation Mode, Small Footprint. Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Number of Circuit Connections Per String. Reverse Transmission, Load Priority. 21.35.825cm/8.392.289.84inch. Solar Grid Tie Micro Inverter. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “freetrade-shop” and is located in this country: US. This item can be shipped to United States.

Application: Applicable to 30V or 36V solar panels, 36V batteries
Current Output: /
Current Type: /
System Configuration: /
Current Rating: /
Features: LCD Display, Digital Control, Electrical Isolation, Safety Guard, Flexible Installation Mode, Small Footprint:
Charging Mode: /
Resistance Properties: /
Model: WVC-700W
Color: Silver
Material: Aluminium Alloy
Power: 700W
Voltage: 110V
Plug Type: US Standard
Maximum Input DC Voltage: 54V
Peak Power Tracking Voltage: 22-45V
Operating Voltage Range: 17-50V
Min/Max Start-up Voltage: 22-50V
Maximum DC Short Circuit Current: 40A
Maximum Input Operating Current: 30A
Output Peak Power: 700watt
Rated Output Power: 650watt
Rated Output Current: 6.36A
Rated Voltage Range: 80-160VAC
Rated Frequency Range: 57-62.5Hz
Power Factor: ＞99%
Number of Circuit Connections Per String: 6
Static MPPT Efficiency: 99.5%
Maximum Output Efficiency: 91.2%
Night Time Power Loss: <1W
Total Flow Distortion: <5%
Operating Temperature Range: ﹣40℃~60℃/﹣40℉~140℉
Waterproof Rating: IP65
Cooling Method: Self-cooling
Communication Mode: Power Line Carrier
Power Transmission Mode: Reverse Transmission, Load Priority
Product Size: 21.3*5.8*25cm/8.39*2.28*9.84inch
Brand: Unbranded
Type: Solar Grid Tie Micro Inverter

Category: 700w | Comments Off

January 9

700W SOLAR GRID TIE MICRO INVERTER Fits for 30V/36V SOLAR PANELS WATERPROOF IP65

700W SOLAR GRID TIE MICRO INVERTER Fits for 30V/36V SOLAR PANELS WATERPROOF IP65. An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This micro inverter makes it easier. Made of fine aluminum alloy, this IP65 waterproof inverter has a wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. The inverter is made of aluminum alloy, which is durable, corrosion-resistant, and not easy to rust. You can use it for a long time without frequent replacement, and your cost can be saved. The inverter has built-in high-precision maximum power point tracking, which can optimize the power collection from the solar panel, accurately capture and lock the maximum output power point, and greatly increase power generation to more than 25%. In addition, the efficient power reverse transmission technology can transmit the power that can not be used up to the grid in the reverse direction to other places for use, and the power transmission rate can reach 99.9%. The inverter is equipped with an LCD display screen to monitor voltage, power, frequency, current, etc. So you can see the machine clearly in operation. The inverter adopts intelligent soft switching technology, high-frequency switching power supply technology, and 32-bit DSP full digital SPWM control technology, making the product strong anti-interference ability, fast operation speed, high intelligence, and a powerful functional system, which can meet the needs of users. The output and input of the system are completely electrically isolated, the insulation performance of the entire power distribution system is good, and the fully isolated booster circuit is safer and more reliable. The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. Besides, the IP65 waterproof design can prevent rain from eroding its surface, so you can use it with confidence. After the installation of the power station, you don’t need to do maintenance work. After a long period of use, you only need to remove the dust from the photovoltaic panel. With a size of 8.392.289.84inch, the inverter adopts high-frequency telephone, micro processing, and other technologies, so it is smaller, lighter, and won’t occupy too much space. During installation, you can stack multiple inverters at will, form a single-phase parallel stacking system, or conveniently form a three-phase system to provide a three-phase AC. We have been working hard to provide better service and quality for our customers, which is our goal. If there is any quality problem with our inverters. The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. The inverter is provided with heat dissipation holes, which can play a good role in heat dissipation and prolong the service life of the inverter. This product is applicable to 30V or 36V solar panels, 36V batteries. The inverter can be widely used in residential or commercial areas for turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter. Step 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. Plug Type: US Standard. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50V. Maximum DC Short Circuit Current: 40A. Maximum Input Operating Current: 30A. Output Peak Power: 700watt. Rated Output Power: 650watt. Rated Output Current: 6.36A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Number of Circuit Connections Per String: 6. Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 2.48kg/5.47lbs. Net Weight: 1.63kg/3.59lbs. Product Size: 21.35.825cm/8.392.289.84inch. Package Size: 342411.5cm/13.399.454.53inch. 1 Solar Grid Tie Micro Inverter. Other Accessories for Installation. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Applicable to 30V or 36V solar panels, 36V batteries. LCD Display, Digital Control, Electrical Isolation, Safety Guard, Flexible Installation Mode, Small Footprint. Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Number of Circuit Connections Per String. Reverse Transmission, Load Priority. 21.35.825cm/8.392.289.84inch. Solar Grid Tie Micro Inverter. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “interview888″ and is located in this country: US. This item can be shipped to United States.

Application: Applicable to 30V or 36V solar panels, 36V batteries
Current Output: /
Current Type: /
System Configuration: /
Current Rating: /
Features: LCD Display, Digital Control, Electrical Isolation, Safety Guard, Flexible Installation Mode, Small Footprint:
Charging Mode: /
Resistance Properties: /
Model: WVC-700W
Color: Silver
Material: Aluminium Alloy
Power: 700W
Voltage: 110V
Plug Type: US Standard
Maximum Input DC Voltage: 54V
Peak Power Tracking Voltage: 22-45V
Operating Voltage Range: 17-50V
Min/Max Start-up Voltage: 22-50V
Maximum DC Short Circuit Current: 40A
Maximum Input Operating Current: 30A
Output Peak Power: 700watt
Rated Output Power: 650watt
Rated Output Current: 6.36A
Rated Voltage Range: 80-160VAC
Rated Frequency Range: 57-62.5Hz
Power Factor: ＞99%
Number of Circuit Connections Per String: 6
Static MPPT Efficiency: 99.5%
Maximum Output Efficiency: 91.2%
Night Time Power Loss: <1W
Total Flow Distortion: <5%
Operating Temperature Range: ﹣40℃~60℃/﹣40℉~140℉
Waterproof Rating: IP65
Cooling Method: Self-cooling
Communication Mode: Power Line Carrier
Power Transmission Mode: Reverse Transmission, Load Priority
Product Size: 21.3*5.8*25cm/8.39*2.28*9.84inch
Brand: Unbranded
Type: Solar Grid Tie Micro Inverter

Category: 700w | Comments Off

January 5

700w Solar Grid Tie Micro Inverter For 30v Or 36v Solar Panels Waterproof Ip65

700W SOLAR GRID TIE MICRO INVERTER FOR 30V OR 36V SOLAR PANELS WATERPROOF IP65. An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This micro inverter makes it easier. Made of fine aluminum alloy, this IP65 waterproof inverter has a wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. The inverter is made of aluminum alloy, which is durable, corrosion-resistant, and not easy to rust. You can use it for a long time without frequent replacement, and your cost can be saved. The inverter has built-in high-precision maximum power point tracking, which can optimize the power collection from the solar panel, accurately capture and lock the maximum output power point, and greatly increase power generation to more than 25%. In addition, the efficient power reverse transmission technology can transmit the power that can not be used up to the grid in the reverse direction to other places for use, and the power transmission rate can reach 99.9%. The inverter is equipped with an LCD display screen to monitor voltage, power, frequency, current, etc. So you can see the machine clearly in operation. The inverter adopts intelligent soft switching technology, high-frequency switching power supply technology, and 32-bit DSP full digital SPWM control technology, making the product strong anti-interference ability, fast operation speed, high intelligence, and a powerful functional system, which can meet the needs of users. The output and input of the system are completely electrically isolated, the insulation performance of the entire power distribution system is good, and the fully isolated booster circuit is safer and more reliable. The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. Besides, the IP65 waterproof design can prevent rain from eroding its surface, so you can use it with confidence. After the installation of the power station, you don’t need to do maintenance work. After a long period of use, you only need to remove the dust from the photovoltaic panel. With a size of 8.392.289.84inch, the inverter adopts high-frequency telephone, micro processing, and other technologies, so it is smaller, lighter, and won’t occupy too much space. During installation, you can stack multiple inverters at will, form a single-phase parallel stacking system, or conveniently form a three-phase system to provide a three-phase AC. We have been working hard to provide better service and quality for our customers, which is our goal. If there is any quality problem with our inverters. The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. The inverter is provided with heat dissipation holes, which can play a good role in heat dissipation and prolong the service life of the inverter. This product is applicable to 30V or 36V solar panels, 36V batteries. The inverter can be widely used in residential or commercial areas for turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter. Step 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. Plug Type: US Standard. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50V. Maximum DC Short Circuit Current: 40A. Maximum Input Operating Current: 30A. Output Peak Power: 700watt. Rated Output Power: 650watt. Rated Output Current: 6.36A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Number of Circuit Connections Per String: 6. Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 2.48kg/5.47lbs. Net Weight: 1.63kg/3.59lbs. Product Size: 21.35.825cm/8.392.289.84inch. Package Size: 342411.5cm/13.399.454.53inch. 1 Solar Grid Tie Micro Inverter. Other Accessories for Installation. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Applicable to 30V or 36V solar panels, 36V batteries. LCD Display, Digital Control, Electrical Isolation, Safety Guard, Flexible Installation Mode, Small Footprint. Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Number of Circuit Connections Per String. Reverse Transmission, Load Priority. 21.35.825cm/8.392.289.84inch. Solar Grid Tie Micro Inverter. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “autopartstop666″ and is located in this country: US. This item can be shipped to United States.

Application: Applicable to 30V or 36V solar panels, 36V batteries
Current Output: /
Current Type: /
System Configuration: /
Current Rating: /
Features: LCD Display, Digital Control, Electrical Isolation, Safety Guard, Flexible Installation Mode, Small Footprint:
Charging Mode: /
Resistance Properties: /
Model: WVC-700W
Color: Silver
Material: Aluminium Alloy
Power: 700W
Voltage: 110V
Plug Type: US Standard
Maximum Input DC Voltage: 54V
Peak Power Tracking Voltage: 22-45V
Operating Voltage Range: 17-50V
Min/Max Start-up Voltage: 22-50V
Maximum DC Short Circuit Current: 40A
Maximum Input Operating Current: 30A
Output Peak Power: 700watt
Rated Output Power: 650watt
Rated Output Current: 6.36A
Rated Voltage Range: 80-160VAC
Rated Frequency Range: 57-62.5Hz
Power Factor: ＞99%
Number of Circuit Connections Per String: 6
Static MPPT Efficiency: 99.5%
Maximum Output Efficiency: 91.2%
Night Time Power Loss: <1W
Total Flow Distortion: <5%
Operating Temperature Range: ﹣40℃~60℃/﹣40℉~140℉
Waterproof Rating: IP65
Cooling Method: Self-cooling
Communication Mode: Power Line Carrier
Power Transmission Mode: Reverse Transmission, Load Priority
Product Size: 21.3*5.8*25cm/8.39*2.28*9.84inch
Brand: Unbranded
Type: Solar Grid Tie Micro Inverter

Category: 700w | Comments Off

December 13

Solar Panels Grid Tie Micro Inverter MPPT 20-60VDC 80-260VAC WiFi Function

Solar Panels Grid Tie Micro Inverter MPPT 20-60VDC 80-260VAC WiFi Function. This inverter has a new smart WiFi module, no need to order a data box, directly download the APP software, scan the code to log in, and easily use the WiFi module to check the power generation data. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “rodonite-7″ and is located in this country: CN. This item can be shipped worldwide.

Color: 700W
Input Voltage: 20-60V
Output Voltage: 80-260V
Current Output: 2*13A
System Configuration: Grid-Tie
Power Source: Solar
Size: Standard
Custom Bundle: No
MPN: 767545434
Item Length: Standard
Wire Gauge: Other
Current Type: AC/DC
Voltage: Other
Connector Type: Other
Features: Durable
Inverter Technology: Microinverter
Current Rating: 2*13A
Brand: Unbranded
Type: Charger/Inverter
Connector Configuration: Other
Model: Other
Recommended Environment: Indoor/Outdoor
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Other
Country/Region of Manufacture: China
Application: Agriculture/Farming, Electronics, Home/Garden
Power: 600W 700W 800W
Product Line: Solar Panels Grid Tie Micro Inverter

Category: solar | Comments Off

December 9

NEW! 700W SOLAR GRID TIE MICRO INVERTER for 30V/36V SOLAR PANELS WATERPROOF IP65

700W SOLAR GRID TIE MICRO INVERTER for 30V/36V SOLAR PANELS WATERPROOF IP65. An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This micro inverter makes it easier. Made of fine aluminum alloy, this IP65 waterproof inverter has a wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. The inverter is made of aluminum alloy, which is durable, corrosion-resistant, and not easy to rust. You can use it for a long time without frequent replacement, and your cost can be saved. The inverter has built-in high-precision maximum power point tracking, which can optimize the power collection from the solar panel, accurately capture and lock the maximum output power point, and greatly increase power generation to more than 25%. In addition, the efficient power reverse transmission technology can transmit the power that can not be used up to the grid in the reverse direction to other places for use, and the power transmission rate can reach 99.9%. The inverter is equipped with an LCD display screen to monitor voltage, power, frequency, current, etc. So you can see the machine clearly in operation. The inverter adopts intelligent soft switching technology, high-frequency switching power supply technology, and 32-bit DSP full digital SPWM control technology, making the product strong anti-interference ability, fast operation speed, high intelligence, and a powerful functional system, which can meet the needs of users. The output and input of the system are completely electrically isolated, the insulation performance of the entire power distribution system is good, and the fully isolated booster circuit is safer and more reliable. The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. Besides, the IP65 waterproof design can prevent rain from eroding its surface, so you can use it with confidence. After the installation of the power station, you don’t need to do maintenance work. After a long period of use, you only need to remove the dust from the photovoltaic panel. With a size of 8.392.289.84inch, the inverter adopts high-frequency telephone, micro processing, and other technologies, so it is smaller, lighter, and won’t occupy too much space. During installation, you can stack multiple inverters at will, form a single-phase parallel stacking system, or conveniently form a three-phase system to provide a three-phase AC. We have been working hard to provide better service and quality for our customers, which is our goal. If there is any quality problem with our inverters. The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. The inverter is provided with heat dissipation holes, which can play a good role in heat dissipation and prolong the service life of the inverter. This product is applicable to 30V or 36V solar panels, 36V batteries. The inverter can be widely used in residential or commercial areas for turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter. Step 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. Plug Type: US Standard. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50V. Maximum DC Short Circuit Current: 40A. Maximum Input Operating Current: 30A. Output Peak Power: 700watt. Rated Output Power: 650watt. Rated Output Current: 6.36A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Number of Circuit Connections Per String: 6. Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 2.48kg/5.47lbs. Net Weight: 1.63kg/3.59lbs. Product Size: 21.35.825cm/8.392.289.84inch. Package Size: 342411.5cm/13.399.454.53inch. 1 Solar Grid Tie Micro Inverter. Other Accessories for Installation. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Applicable to 30V or 36V solar panels, 36V batteries. LCD Display, Digital Control, Electrical Isolation, Safety Guard, Flexible Installation Mode, Small Footprint. Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Number of Circuit Connections Per String. Reverse Transmission, Load Priority. 21.35.825cm/8.392.289.84inch. Solar Grid Tie Micro Inverter. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “rotarytattoo” and is located in this country: US. This item can be shipped to United States.

Application: Applicable to 30V or 36V solar panels, 36V batteries
Current Output: /
Current Type: /
System Configuration: /
Current Rating: /
Features: LCD Display, Digital Control, Electrical Isolation, Safety Guard, Flexible Installation Mode, Small Footprint:
Charging Mode: /
Resistance Properties: /
Model: WVC-700W
Color: Silver
Material: Aluminium Alloy
Power: 700W
Voltage: 110V
Plug Type: US Standard
Maximum Input DC Voltage: 54V
Peak Power Tracking Voltage: 22-45V
Operating Voltage Range: 17-50V
Min/Max Start-up Voltage: 22-50V
Maximum DC Short Circuit Current: 40A
Maximum Input Operating Current: 30A
Output Peak Power: 700watt
Rated Output Power: 650watt
Rated Output Current: 6.36A
Rated Voltage Range: 80-160VAC
Rated Frequency Range: 57-62.5Hz
Power Factor: ＞99%
Number of Circuit Connections Per String: 6
Static MPPT Efficiency: 99.5%
Maximum Output Efficiency: 91.2%
Night Time Power Loss: <1W
Total Flow Distortion: <5%
Operating Temperature Range: ﹣40℃~60℃/﹣40℉~140℉
Waterproof Rating: IP65
Cooling Method: Self-cooling
Communication Mode: Power Line Carrier
Power Transmission Mode: Reverse Transmission, Load Priority
Product Size: 21.3*5.8*25cm/8.39*2.28*9.84inch
Brand: Unbranded
Type: Solar Grid Tie Micro Inverter

Category: 700w | Comments Off

November 30

Electrical Supplies Grid-tied Inverter 2.4G Wireless 300W 36V Solar Panels

Electrical Supplies Grid-tied Inverter 2.4G Wireless 300W 36V Solar Panels. Made of high quality materials, durable Model: 200W, 250W, 300W, 350W (optional) IP65 waterproof design (installed at the bottom of the solar panel) Communication data monitoring screen. Built-in high performance Maximum Power Point Tracking (MPPT) function Suitable for 2X250W-300W 36V solar panels (Vmp30-39V; Voc36-50V) aluminum alloy. Supports single-phase or three-phase connection. High precision phase detection; overvoltage and undervoltage protection; overfrequency and underfrequency protection; island protection. Product parameters: SG200MS: Inverter model: SG-200W MPPT voltage range: 24V-40V Working voltage range: 18V-50V Maximum input voltage: 50V Starting voltage: 18V Maximum input power: 200W Recommended solar panel: 200W, Voc: 36-50V AC rated voltage range: 220V Rated output power: 195W Maximum output power: 200W Default output voltage range: 230VAC (180V-280V) Rated output frequency: 50Hz/60Hz automatic Maximum number of units per branch: 120VAC: 4 units / 230VAC: 8 units Waterproof grade: IP65 Communication: 2.4G wireless (without communication box) SG300MS: Inverter model: SG-300W MPPT voltage range: 24V-40V Working voltage range: 18V-50V Maximum input voltage: 50V Starting voltage: 18V Maximum input power: 300W Recommended solar panel: 300W, Voc: 36-50V AC rated voltage range: 220V Rated output power: 295W Maximum output power: 300W Default output voltage range: 230VAC (180V-280V) Rated output frequency: 50Hz/60Hz automatic Maximum number of units per branch: 120VAC: 4 units / 230VAC: 8 units Waterproof grade: IP65 Communication: 2.4G wireless (without communication box) User notice: Vmp (of the solar panel) must be within the MPPT tracking range to ensure good output efficiency Use only the solar panel connected to this device. The device is an ON-GRID microinverter. In order for it to work, it must be properly connected to the power supply and the power supply must be working properly. When the grid stops working, it also stops generating electricity. Do not exceed the voltage of the PV modules to exceed the maximum input voltage of the solar grid-tied inverter. Please kindly note that. Also, the each additional item means. The the same color and size. Transit time may be a little delayed because of the. If you have any questions. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “millionbillion” and is located in this country: CN. This item can be shipped worldwide.

Styles: 300W
Brand: Unbranded
Type: Grid-tied inverter
Package Contents: 1 * Grid-tied inverter (optional)

Category: electrical | Comments Off

November 28

WVC-700W Solar Grid Tie Micro Inverter for 30v/36v Solar Panels Waterproof-IP65

WVC-700W Solar Grid Tie Micro Inverter for 30v/36v Solar Panels Waterproof-IP65. An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This micro inverter makes it easier. Made of fine aluminum alloy, this IP65 waterproof inverter has a wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. The inverter is made of aluminum alloy, which is durable, corrosion-resistant, and not easy to rust. You can use it for a long time without frequent replacement, and your cost can be saved. The inverter has built-in high-precision maximum power point tracking, which can optimize the power collection from the solar panel, accurately capture and lock the maximum output power point, and greatly increase power generation to more than 25%. In addition, the efficient power reverse transmission technology can transmit the power that can not be used up to the grid in the reverse direction to other places for use, and the power transmission rate can reach 99.9%. The inverter is equipped with an LCD display screen to monitor voltage, power, frequency, current, etc. So you can see the machine clearly in operation. The inverter adopts intelligent soft switching technology, high-frequency switching power supply technology, and 32-bit DSP full digital SPWM control technology, making the product strong anti-interference ability, fast operation speed, high intelligence, and a powerful functional system, which can meet the needs of users. The output and input of the system are completely electrically isolated, the insulation performance of the entire power distribution system is good, and the fully isolated booster circuit is safer and more reliable. The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. Besides, the IP65 waterproof design can prevent rain from eroding its surface, so you can use it with confidence. After the installation of the power station, you don’t need to do maintenance work. After a long period of use, you only need to remove the dust from the photovoltaic panel. With a size of 8.392.289.84inch, the inverter adopts high-frequency telephone, micro processing, and other technologies, so it is smaller, lighter, and won’t occupy too much space. During installation, you can stack multiple inverters at will, form a single-phase parallel stacking system, or conveniently form a three-phase system to provide a three-phase AC. We have been working hard to provide better service and quality for our customers, which is our goal. If there is any quality problem with our inverters. The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. The inverter is provided with heat dissipation holes, which can play a good role in heat dissipation and prolong the service life of the inverter. This product is applicable to 30V or 36V solar panels, 36V batteries. The inverter can be widely used in residential or commercial areas for turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter. Step 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. Plug Type: US Standard. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50V. Maximum DC Short Circuit Current: 40A. Maximum Input Operating Current: 30A. Output Peak Power: 700watt. Rated Output Power: 650watt. Rated Output Current: 6.36A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Number of Circuit Connections Per String: 6. Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 2.48kg/5.47lbs. Net Weight: 1.63kg/3.59lbs. Product Size: 21.35.825cm/8.392.289.84inch. Package Size: 342411.5cm/13.399.454.53inch. 1 Solar Grid Tie Micro Inverter. Other Accessories for Installation. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Applicable to 30V or 36V solar panels, 36V batteries. LCD Display, Digital Control, Electrical Isolation, Safety Guard, Flexible Installation Mode, Small Footprint. Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Number of Circuit Connections Per String. Reverse Transmission, Load Priority. 21.35.825cm/8.392.289.84inch. Solar Grid Tie Micro Inverter. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “helloautoparts2017″ and is located in this country: US. This item can be shipped to United States.

Application: Applicable to 30V or 36V solar panels, 36V batteries
Current Output: /
Current Type: /
System Configuration: /
Current Rating: /
Features: LCD Display, Digital Control, Electrical Isolation, Safety Guard, Flexible Installation Mode, Small Footprint:
Charging Mode: /
Resistance Properties: /
Model: WVC-700W
Color: Silver
Material: Aluminium Alloy
Power: 700W
Voltage: 110V
Plug Type: US Standard
Maximum Input DC Voltage: 54V
Peak Power Tracking Voltage: 22-45V
Operating Voltage Range: 17-50V
Min/Max Start-up Voltage: 22-50V
Maximum DC Short Circuit Current: 40A
Maximum Input Operating Current: 30A
Output Peak Power: 700watt
Rated Output Power: 650watt
Rated Output Current: 6.36A
Rated Voltage Range: 80-160VAC
Rated Frequency Range: 57-62.5Hz
Power Factor: ＞99%
Number of Circuit Connections Per String: 6
Static MPPT Efficiency: 99.5%
Maximum Output Efficiency: 91.2%
Night Time Power Loss: <1W
Total Flow Distortion: <5%
Operating Temperature Range: ﹣40℃~60℃/﹣40℉~140℉
Waterproof Rating: IP65
Cooling Method: Self-cooling
Communication Mode: Power Line Carrier
Power Transmission Mode: Reverse Transmission, Load Priority
Product Size: 21.3*5.8*25cm/8.39*2.28*9.84inch
Brand: Unbranded
Type: Solar Grid Tie Micro Inverter

Category: wvc-700w | Comments Off

October 29

Can You MIX Solar Panels On A Micro Grid Tie Inverter

Category: solar | Comments Off

October 27

Solar Grid Tie Micro Inverter IP65 WVC-700w Waterproof for 30V 36V solar panels

700W Waterproof Solar Grid Tie Micro Inverter IP65. An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This micro inverter makes it easier. Made of fine aluminum alloy, this IP65 waterproof inverter has a wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. The inverter is made of aluminum alloy, which is durable, corrosion-resistant, and not easy to rust. You can use it for a long time without frequent replacement, and your cost can be saved. The inverter has built-in high-precision maximum power point tracking, which can optimize the power collection from the solar panel, accurately capture and lock the maximum output power point, and greatly increase power generation to more than 25%. In addition, the efficient power reverse transmission technology can transmit the power that can not be used up to the grid in the reverse direction to other places for use, and the power transmission rate can reach 99.9%. The inverter is equipped with an LCD display screen to monitor voltage, power, frequency, current, etc. So you can see the machine clearly in operation. The inverter adopts intelligent soft switching technology, high-frequency switching power supply technology, and 32-bit DSP full digital SPWM control technology, making the product strong anti-interference ability, fast operation speed, high intelligence, and a powerful functional system, which can meet the needs of users. The output and input of the system are completely electrically isolated, the insulation performance of the entire power distribution system is good, and the fully isolated booster circuit is safer and more reliable. The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. Besides, the IP65 waterproof design can prevent rain from eroding its surface, so you can use it with confidence. After the installation of the power station, you don’t need to do maintenance work. After a long period of use, you only need to remove the dust from the photovoltaic panel. With a size of 8.392.289.84inch, the inverter adopts high-frequency telephone, micro processing, and other technologies, so it is smaller, lighter, and won’t occupy too much space. During installation, you can stack multiple inverters at will, form a single-phase parallel stacking system, or conveniently form a three-phase system to provide a three-phase AC. We have been working hard to provide better service and quality for our customers, which is our goal. If there is any quality problem with our inverters. The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. The inverter is provided with heat dissipation holes, which can play a good role in heat dissipation and prolong the service life of the inverter. This product is applicable to 30V or 36V solar panels, 36V batteries. The inverter can be widely used in residential or commercial areas for turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter. Step 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. Plug Type: US Standard. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50V. Maximum DC Short Circuit Current: 40A. Maximum Input Operating Current: 30A. Output Peak Power: 700watt. Rated Output Power: 650watt. Rated Output Current: 6.36A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Number of Circuit Connections Per String: 6. Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 2.48kg/5.47lbs. Net Weight: 1.63kg/3.59lbs. Product Size: 21.35.825cm/8.392.289.84inch. Package Size: 342411.5cm/13.399.454.53inch. 1 Solar Grid Tie Micro Inverter. Other Accessories for Installation. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Number of Circuit Connections Per String. Reverse Transmission, Load Priority. 21.35.825cm/8.392.289.84inch. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “mart2mart” and is located in this country: US. This item can be shipped to United States.

Model: WVC-700W
Color: Silver
Material: Aluminium Alloy
Power: 700W
Voltage: 110V
Plug Type: US Standard
Maximum Input DC Voltage: 54V
Peak Power Tracking Voltage: 22-45V
Operating Voltage Range: 17-50V
Min/Max Start-up Voltage: 22-50V
Maximum DC Short Circuit Current: 40A
Maximum Input Operating Current: 30A
Output Peak Power: 700watt
Rated Output Power: 650watt
Rated Output Current: 6.36A
Rated Voltage Range: 80-160VAC
Rated Frequency Range: 57-62.5Hz
Power Factor: ＞99%
Number of Circuit Connections Per String: 6
Static MPPT Efficiency: 99.5%
Maximum Output Efficiency: 91.2%
Night Time Power Loss: <1W
Total Flow Distortion: <5%
Operating Temperature Range: ﹣40℃~60℃/﹣40℉~140℉
Waterproof Rating: IP65
Cooling Method: Self-cooling
Communication Mode: Power Line Carrier
Power Transmission Mode: Reverse Transmission, Load Priority
Product Size: 21.3*5.8*25cm/8.39*2.28*9.84inch
Brand: Unbranded

Category: solar | Comments Off

October 26

AC110V-Output Microinverter 600W Solar Grid Tie Micro Inverter For Solar Panels

IP65 Waterproof Microinverter 600W Solar Grid Tie Micro Inverter for Solar Panel Description This microinverter can efficiently turn sunlight into clean and green power. The IP65 waterproof design and aluminum construction make it last longer. And it has a display that allows you to clearly see the machine in action. Its powerful output efficiently produces electricity for you to use. Application This product is applicable to 30V or 36V solar panels, 36V batteries. It can be used in residential and small commercial environments. It is suitable for various household appliances. It can convert the DC power generated by solar panels into AC power available for household appliances. AC110V-Output Microinverter 600W Solar Grid Tie Micro Inverter For Solar Panels. IP65 Waterproof Microinverter 600W Solar Grid Tie Micro Inverter for Solar Panel. This microinverter can efficiently turn sunlight into clean and green power. High-quality Material: The microinverter is made of aluminum alloy, which is durable, corrosion-resistant, and not easy to rust. You can use it for a long time without frequent replacement. Reverse Power Transmission: This item adopts highly efficient reverse power transmission technology, in which the power is transmitted in the reverse direction when in grid-connected output mode, automatically detecting the load in the circuit and giving priority to its use, making the output more efficient in photovoltaic power generation application systems. Maximum Power Point Tracking: A powerful maximum power point tracking algorithm to optimize power harvesting from solar panels that precisely captures and targets the maximum output power point, resulting in a significant increase in power generation. Electrical Isolation: The complete electrical isolation of the machine’s output and input makes the entire power distribution system well insulated and the use of fully isolated boost circuits makes it safer and more reliable to use. Six-fold Protection: The product comes with over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short-circuit protection, and overload protection, so you can use it with confidence. Flexible Installation: This inverter can be stacked in any number of units, forming a single-phase parallel stacking system or easily forming a three-phase system to provide three-phase AC power, which you can install according to your specific needs. Easy Maintenance: Once installed, this machine requires little maintenance and only needs to be cleaned of dust from the PV panels. HD Display: This microinverter is equipped with an LCD display screen to monitor voltage, power, frequency, current, etc. So you can see the machine clearly in operation. Good Waterproof Performance: IP65 waterproof design and aluminum alloy material can effectively prevent rain from eroding the surface, you can use it with confidence. Environmentally Friendly : This micro-inverter converts the direct current generated by the solar panels into alternating current and provides a continuous source of energy that is environmentally friendly and pollution-free. Small Footprint: With dimensions of just 21.35.825cm/8.392.289.84inch, this micro-inverter does not take up much space and can be installed in even small shops. Full Digital Control: The machine adopts full digital control technology, which makes the machine have a strong anti-interference ability, fast computing speed, and a high degree of intelligence. Its powerful functional system can meet your usage needs. It is our pleasure to answer your confusion and questions. Fixed Gasket&Washer: The gasket and washer in the package help you to mount the PV bracket with great ease. Heat Dissipation Holes: The inverter body has multiple heat dissipation holes, which help the machine to dissipate heat and enable it to run smoothly. This product is applicable to 30V or 36V solar panels, 36V batteries. Install the inverter on the bracket of the photovoltaic panel with the screws provided by the machine. Connect the positive and negative poles of the DC connection plug on the photovoltaic board to the DC input terminal of the inverter. Open the waterproof cover of the AC output connector of the inverter and connect the AC cable to the AC waterproof plug. Connect the AC output cable to the AC main cable. Repeat steps 1 to 3, install and connect all inverters. Connect the AC main cable to the utility grid to start your green energy journey. Operating Temperature Range: -40? VOC Voltage Range: 36-48V. Maximum Output DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Startup Voltage: 22-50V. Maximum DC Short Circuit Current: 40A. Maximum Input Operating Current: 27.2A. Peak Output Power: 600W. Rated Output Power: 550W. Rated Output Current: 4.58A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Static MPPT Efficiency: 99.5%. Output Efficiency: 91.2%. Recommended Battery Parameters: 36V/20mah. Gross Weight: 2.48kg/5.47lbs. Net Weight: 1.63kg/3.59lbs. Product Size: 21.35.825cm/8.392.289.84inch. Package Size: 342411.5cm/13.399.454.53inch. 1 AC Connection Cable. Other Accessories for Installation. Please read the operating manual completely before use. And pay particular attention to the safety instructions included. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is36V/20mah for 600W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please do not dismantle the inverter by non-specialists, only qualified service personnel should repair this product. Please install the inverter in a place with low humidity, good ventilation and cool places to avoid overheating the inverter and remove flammable and explosive materials from the surrounding area. When using this product, avoid children touching and playing with it to avoid electric shock. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Maximum Output DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. 21.35.825cm/8.392.289.84inch. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “autopartstop666″ and is located in this country: US. This item can be shipped to United States.

Brand: Unbranded
Type: Micro Inverter
Model: WVC-600W
Color: Blue
Material: Aluminium Alloy
Power: 600W
Voltage: 110V
Plug: US Standard
Operating Temperature Range: -40℃~60℃/-40℉~140℉
Waterproof Rating: IP65
Cooling Method: Self-cooling
VOC Voltage Range: 36-48V
Maximum Output DC Voltage: 54V
Peak Power Tracking Voltage: 22-45V
Operating Voltage Range: 17-50V
Min/Max Startup Voltage: 22-50V
Maximum DC Short Circuit Current: 40A
Maximum Input Operating Current: 27.2A
Peak Output Power: 600W
Rated Output Power: 550W
Rated Output Current: 4.58A
Rated Voltage Range: 80-160VAC
Rated Frequency Range: 57-62.5Hz
Static MPPT Efficiency: 99.5%
Max. Output Efficiency: 91.2%
Nighttime Power Loss: <1W
Total Flow Distortion: <5%
Recommended Battery Parameters: 36V/20mah
Product Size: 21.3*5.8*25cm/8.39*2.28*9.84inch
Wattage: 600w

Category: ac110v-output | Comments Off

December 2024
M	T	W	T	F	S	S
« Nov
						1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	29
30	31