1000W Wind Turbine on Grid Tie Inverter Limiter Home Power Sun 1000G2 WAL

You may also like. NEW 1000W Wind Power Grid Tie Inverter. With dump load controller and resistor. Max Efficiency:>92% /MPPT Efficiency:99%. DC/AC 22V-60V / 45V-90V (selected). AC 100V 110V 120V 220V 230V 240V 50hz 60hz. Low cost and easy installation. Directly connect to three phase wind turbine. Much better output waveform compare with similiar GTI. Improving the efficiency of the entire solar power system. Overload protection , Anti-island protection. Short-circuit protection/Reverse polarity protection. AC output voltage and current THD<5%, PF>99%. Build in dump load function. Build in Limiter (internal type). Introduction of Sunshine Grid Tie Inverter for Wind Turbine. The Wind Grid Tie Power Inverter is the world’s most technologically advanced inverter for use in utility-interactive applications. This manual details the safe installation and operation of the The Wind Grid Tie Inverter. This integrated system maximizes energy harvest, increases system reliability, and implifies design, installation and management. The small type wind grid tie power inverter can obtain the wind energy from wind turbine, and can tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. We call the system combining with small grid tie inverter and wind turbine as’SGWT’. The system includes wind turbine and small grid tie inverter and installation kit, and some “SGWT” also will include controller, dump load resistor. The inverter can be connected to any outlets of utility grid at house. The small grid tie inverter monitors the volume, frequency and phase of the home utility grid, then produce pure sine wave AC power that the frequency and phase are as same as the grid’s, and the volume is a bit higher than the grid’s, then according to the current controlled PWM, to control the output power to the grid. The small grid tie inverter just puts out power when the home grid is on. When the wind turbine is rotating, and the output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produces power, and the grid tie inverter will change the power from wind turbine to the home grid. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these. Power from the inverters will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid. Input Voltage Range:22-60vdc/45-90vdc (test point is at the output of the inside rectifier) , Peak power tracking voltage:25-60v/50-90v , Max output power:1000w , Nominal Voltage Range: 95-140v/185-265v , Max Efficiency:>92% , MPPT Efficiency:99%. Input AC/DC Voltage Range. AC Output Voltage Range. Dimensions (W x H x D). 322 x 196 x 88 mm. Wind Grid Tie Inverter Installation. Considering the total capacity of the grid tie power system that you need. The total capacity of the whole grid tie power system is according to your power consumption in the site that you want to install, or how much power that you want it to feed to the utility grid. Actually, the volume is just according to your willingness, because when the total power of electric appliances that are being used in the installation site is larger than the output power of the grid tie power system, these power from the system will be consumed in the site, this will slow down the power meter, otherwise, the difference of the output power from the system between the total used power of the appliances will feed to the utility grid. For example, if you want to install a grid tie power system in your house, you could decide the total power volume according to the total power the appliances that you use in your house, maybe the consumption of total energy in per day is about 5KWH, then you should realize the averaged speed of the wind in per day at your site, check the power to the speed of the wind curve from the specifications of the wind turbine, then you can estimate the average power that the wind turbine can generate, actually the real average power the wind turbine can generate at your side is not easy to estimate, you need to check the history data of the climate, because it will vary every day according to the climate, just assume a 1KW rated wind turbine is suitable for the grid tie power system that you plan to set, with this capacity of the system, it can supply all power consumption in whole year. When grid tie power system is working, sometimes, there is extra power feed to utility grid if the power from the grid tie system is larger than the power consumed by the appliances in your house, and sometimes will not when it is not larger. If you use a 1KW wind turbine, then we call the “GTWT” system is 1KW grid tie power system, of course, you can install 500W grid tie power system or 2KW grid tie inverter, even more large capacity or more small capacity grid tie inverter, it doesn’t matter. But ifthe capacity is too big, you should consider the volume of AC system of your house can hold the feeded power. Choosing applicable wind turbine for Sunshine Grid Tie Inverter. The most kinds of specifications that the factories marked about the wind turbines. 1, Starting wind speed(m/s). 2, Cut-in wind speed(m/s). 3, Rated wind speed(m/s). 6, Safe wind speed(m/s). 7, Rated DC voltage. You need to choose a wind turbine that the rated power can meet the power consumption for your using. When you choose a wind turbine, you also need to consider ahead what model gird tie inverter of SUN series you want to use. Wind turbines have two output type, one is AC output type, and another is DC output type, if the wind turbine is DC output type, it must be integrated with a rectifier. So if the wind turbine is AC output type, you should use WAL model of SUN series grid tie inverter, if the wind turbine is DC output type, then you should use WDL model of SUN series grid tie inverter. Selecting accessory for installation of the Grid Tie Power System. The accessory for grid tie power system including. 1, Connecting cables will be connected with wind turbine and inverters. 4, Power meter(Optional). 5, Bracket for wind turbine installation(not included in this user manual). Selecting correct model of Sunshine Grid Tie Inverter. When finished step1 to step3, then you can select a correct model of SUN series inverter. If the wind turbine is DC output type, then you should choose WDL model inverters, and the input DC voltage range of the inverter should fit the DC output voltage of the wind turbine, the rated power of the inverter should also fit the max. Power of the wind turbine, and the AC output of the inverter should fit the standard of AC utility grid. If the wind turbine is AC output type, then you should choose WAL model inverters. Most factories don’t supply the AC rated voltage, just supply DC rated voltage, so our WAL also supply the DC input range, please check the DC rated voltage of wind turbine should fit the DC input range of the grid tie inverter. Installing wind turbine to suitable place. Installing the wind turbine of the “SGWT” to suitable location where the wind is strong enough to drive the wind turbine. Warning: Please read the user manual of wind turbine before you install the wind turbine, don’t install the wind turbine under high wind. Warning: Ensure using strong braket to fix the wind turbine to avoid the danger under high wind. Warning: The blades of the wind turbine should be taken down before the hurricane is coming. Installing Sunshine Grid Tie Inverter to suitable place. Place the Grid Tie Inverter on a surface protected from direct sunlight, high temperatures, and water. The inverter requires at least 150mm of clearance around itself for ventilation. The inverters are for indoor use, can’t use at outdoor. You can use screws to fix the inverter to the surface, because some models of Sunshine grid tie inverter have fans on the bottom cover, so the surface should be flat. Connecting Sunshine Grid Tie Power System with cables and connectors. Connecting the Grid Tie Power System with Cables and Connectors After finished from Step1 to Step6, you should connect the wind turbine and inverter with cables and connectors to integrate the Sunshine Grid Tie System. Connect the ground terminal of the wind turbine to the NEC approved AC grounding electrode. Connect the grid tie inverters to the grounded racking using a grounding washer approved for the racking. The ground wire of the AC cables is connnected to the housing of inverter when the AC cables is connected to the inverters, so when the AC plug is inserted to the socket of AC outlet of utility grid in the house, the ground pin of the socket must be connected to the Earth ground. Connecting the wind turbine output cables after complete from Step1 to Step8. Warning: Before connect the wind turbine output cables to grid tie inverter, you should stop the the rotating of the wind turbine just in order to avoid the sparkle when connect the cables. WAL model of grid tie invereter connected with AC output type of wind turbine. Connecting two 1000G2-WAL with a max. Power is 2KW wind turbine. How to select a wind grid tie inverter? Max output power of the wind turbine. 500w-1000w wind turbines , suggest 1000w inverter. 1000w-2000w wind turbines , suggest 2000w turbine. 24v 36v 48v wind turbines , suggest 22-65v inverter. 48v 60v 72v 90V wind turbines , suggest 45-90v inverter. Some wind turbines has been built-in a regulator , the output is DC , please choose DC input type wind inverter. How to use a grid tie inverter with battery and wind turbine? If the user want to use a wind turbine to charge battery first , and output excess power to the grid , we suggest the battery function grid tie inverter(solar power GTI , battery function). The wind inverter can not work with battery well. What is the dump load controller/resistor? The dump load controller/resistor is used to protect the wind turbine and inverter. If the wind speed is too fast , the voltage will be high , it will work to reduce the wind turbines runing speed and voltage. User manual of the wind power inverter. (Only for Business Express). We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. The item “1000W Wind Turbine on Grid Tie Inverter Limiter Home Power Sun 1000G2 WAL” is in sale since Sunday, January 14, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “solarregulator” and is located in Shenzhen. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

Brand: SUN
MPN: SUN-1000G2-WAL
Country/Region of Manufacture: China
Input Voltage: AC 22v-60v or 45v-90v Optional
Output Voltage: 100V 110V 120V 220V 230V 240V auto
Output Frequency: 45-65Hz
Standby Power Consumption: <0.5w
Total Harmonic Distortion: <5%
Peak Inverter Efficiency: 92%
MPPT Efficiency: 99%
Power Factor: 0.99
Output Wave Form: Pure Sine Wave
Dimensions (W x H x D): 322x196x88 mm
Featured Refinements: MPPT
Bundle Listing: No

Category: 1000w | Comments Off

November 20

2000W Wind Power Grid Tie Inverter Pure sinusoidal inverter Home Transformer

Sine Wave Inverter 2000W. Orders are processed from Monday-Friday; Not on the weekends & public holidays. We will work with you to get the case resolved in the fastest method. Hope for your understanding. Please contact with us at first for more details. Defective & Damaged Products. If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it’s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. If an item is received damaged, customer service must be contacted within 7 days of receiving your item. Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear. The item “2000W Wind Power Grid Tie Inverter Pure sinusoidal inverter Home Transformer” is in sale since Tuesday, October 9, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “asion_asc3658″ and is located in Tampa, Florida. This item can be shipped to United States.

Modified Item: No
Country/Region of Manufacture: China
Custom Bundle: No
MPN: 054144
Brand: Unbranded
Non-Domestic Product: No

Category: 2000w | Comments Off

November 18

1000W Wind Turbine on Grid Tie Inverter Limiter Home Power Sun 1000G2 WAL Green

You may also like. 1000W Wind Turbine on Grid Tie Inverter Limiter Home Power Sun 1000G2 WAL. NEW 1000W Wind Power Grid Tie Inverter. With dump load controller and resistor. Max Efficiency:>92% /MPPT Efficiency:99%. DC/AC 22V-60V / 45V-90V (selected). AC 100V 110V 120V 220V 230V 240V 50hz 60hz. Low cost and easy installation. Directly connect to three phase wind turbine. Much better output waveform compare with similiar GTI. Improving the efficiency of the entire solar power system. Overload protection , Anti-island protection. Short-circuit protection/Reverse polarity protection. AC output voltage and current THD<5%, PF>99%. Build in dump load function. Build in Limiter (internal type). Introduction of Sunshine Grid Tie Inverter for Wind Turbine. The Wind Grid Tie Power Inverter is the world’s most technologically advanced inverter for use in utility-interactive applications. This manual details the safe installation and operation of the The Wind Grid Tie Inverter. This integrated system maximizes energy harvest, increases system reliability, and implifies design, installation and management. The small type wind grid tie power inverter can obtain the wind energy from wind turbine, and can tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. We call the system combining with small grid tie inverter and wind turbine as’SGWT’. The system includes wind turbine and small grid tie inverter and installation kit, and some “SGWT” also will include controller, dump load resistor. The inverter can be connected to any outlets of utility grid at house. The small grid tie inverter monitors the volume, frequency and phase of the home utility grid, then produce pure sine wave AC power that the frequency and phase are as same as the grid’s, and the volume is a bit higher than the grid’s, then according to the current controlled PWM, to control the output power to the grid. The small grid tie inverter just puts out power when the home grid is on. When the wind turbine is rotating, and the output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produces power, and the grid tie inverter will change the power from wind turbine to the home grid. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these. Power from the inverters will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid. Input Voltage Range:22-60vdc/45-90vdc (test point is at the output of the inside rectifier) , Peak power tracking voltage:25-60v/50-90v , Max output power:1000w , Nominal Voltage Range: 95-140v/185-265v , Max Efficiency:>92% , MPPT Efficiency:99%. Input AC/DC Voltage Range. AC Output Voltage Range. Dimensions (W x H x D). 322 x 196 x 88 mm. Wind Grid Tie Inverter Installation. Considering the total capacity of the grid tie power system that you need. The total capacity of the whole grid tie power system is according to your power consumption in the site that you want to install, or how much power that you want it to feed to the utility grid. Actually, the volume is just according to your willingness, because when the total power of electric appliances that are being used in the installation site is larger than the output power of the grid tie power system, these power from the system will be consumed in the site, this will slow down the power meter, otherwise, the difference of the output power from the system between the total used power of the appliances will feed to the utility grid. For example, if you want to install a grid tie power system in your house, you could decide the total power volume according to the total power the appliances that you use in your house, maybe the consumption of total energy in per day is about 5KWH, then you should realize the averaged speed of the wind in per day at your site, check the power to the speed of the wind curve from the specifications of the wind turbine, then you can estimate the average power that the wind turbine can generate, actually the real average power the wind turbine can generate at your side is not easy to estimate, you need to check the history data of the climate, because it will vary every day according to the climate, just assume a 1KW rated wind turbine is suitable for the grid tie power system that you plan to set, with this capacity of the system, it can supply all power consumption in whole year. When grid tie power system is working, sometimes, there is extra power feed to utility grid if the power from the grid tie system is larger than the power consumed by the appliances in your house, and sometimes will not when it is not larger. If you use a 1KW wind turbine, then we call the “GTWT” system is 1KW grid tie power system, of course, you can install 500W grid tie power system or 2KW grid tie inverter, even more large capacity or more small capacity grid tie inverter, it doesn’t matter. But ifthe capacity is too big, you should consider the volume of AC system of your house can hold the feeded power. Choosing applicable wind turbine for Sunshine Grid Tie Inverter. The most kinds of specifications that the factories marked about the wind turbines. 1, Starting wind speed(m/s). 2, Cut-in wind speed(m/s). 3, Rated wind speed(m/s). 6, Safe wind speed(m/s). 7, Rated DC voltage. You need to choose a wind turbine that the rated power can meet the power consumption for your using. When you choose a wind turbine, you also need to consider ahead what model gird tie inverter of SUN series you want to use. Wind turbines have two output type, one is AC output type, and another is DC output type, if the wind turbine is DC output type, it must be integrated with a rectifier. So if the wind turbine is AC output type, you should use WAL model of SUN series grid tie inverter, if the wind turbine is DC output type, then you should use WDL model of SUN series grid tie inverter. Selecting accessory for installation of the Grid Tie Power System. The accessory for grid tie power system including. 1, Connecting cables will be connected with wind turbine and inverters. 4, Power meter(Optional). 5, Bracket for wind turbine installation(not included in this user manual). Selecting correct model of Sunshine Grid Tie Inverter. When finished step1 to step3, then you can select a correct model of SUN series inverter. If the wind turbine is DC output type, then you should choose WDL model inverters, and the input DC voltage range of the inverter should fit the DC output voltage of the wind turbine, the rated power of the inverter should also fit the max. Power of the wind turbine, and the AC output of the inverter should fit the standard of AC utility grid. If the wind turbine is AC output type, then you should choose WAL model inverters. Most factories don’t supply the AC rated voltage, just supply DC rated voltage, so our WAL also supply the DC input range, please check the DC rated voltage of wind turbine should fit the DC input range of the grid tie inverter. Installing wind turbine to suitable place. Installing the wind turbine of the “SGWT” to suitable location where the wind is strong enough to drive the wind turbine. Warning: Please read the user manual of wind turbine before you install the wind turbine, don’t install the wind turbine under high wind. Warning: Ensure using strong braket to fix the wind turbine to avoid the danger under high wind. Warning: The blades of the wind turbine should be taken down before the hurricane is coming. Installing Sunshine Grid Tie Inverter to suitable place. Place the Grid Tie Inverter on a surface protected from direct sunlight, high temperatures, and water. The inverter requires at least 150mm of clearance around itself for ventilation. The inverters are for indoor use, can’t use at outdoor. You can use screws to fix the inverter to the surface, because some models of Sunshine grid tie inverter have fans on the bottom cover, so the surface should be flat. Connecting Sunshine Grid Tie Power System with cables and connectors. Connecting the Grid Tie Power System with Cables and Connectors After finished from Step1 to Step6, you should connect the wind turbine and inverter with cables and connectors to integrate the Sunshine Grid Tie System. Connect the ground terminal of the wind turbine to the NEC approved AC grounding electrode. Connect the grid tie inverters to the grounded racking using a grounding washer approved for the racking. The ground wire of the AC cables is connnected to the housing of inverter when the AC cables is connected to the inverters, so when the AC plug is inserted to the socket of AC outlet of utility grid in the house, the ground pin of the socket must be connected to the Earth ground. Connecting the wind turbine output cables after complete from Step1 to Step8. Warning: Before connect the wind turbine output cables to grid tie inverter, you should stop the the rotating of the wind turbine just in order to avoid the sparkle when connect the cables. WAL model of grid tie invereter connected with AC output type of wind turbine. Connecting two 1000G2-WAL with a max. Power is 2KW wind turbine. How to select a wind grid tie inverter? Max output power of the wind turbine. 500w-1000w wind turbines , suggest 1000w inverter. 1000w-2000w wind turbines , suggest 2000w turbine. 24v 36v 48v wind turbines , suggest 22-65v inverter. 48v 60v 72v 90V wind turbines , suggest 45-90v inverter. Some wind turbines has been built-in a regulator , the output is DC , please choose DC input type wind inverter. How to use a grid tie inverter with battery and wind turbine? If the user want to use a wind turbine to charge battery first , and output excess power to the grid , we suggest the battery function grid tie inverter(solar power GTI , battery function). The wind inverter can not work with battery well. What is the dump load controller/resistor? The dump load controller/resistor is used to protect the wind turbine and inverter. If the wind speed is too fast , the voltage will be high , it will work to reduce the wind turbines runing speed and voltage. User manual of the wind power inverter. We will message you if it happens. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. The item “1000W Wind Turbine on Grid Tie Inverter Limiter Home Power Sun 1000G2 WAL Green” is in sale since Thursday, January 18, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “homeliving2017″ and is located in Shenzhen. This item can be shipped worldwide.

Brand: SUN
MPN: SUN-1000G2-WAL
Country/Region of Manufacture: China
Input Voltage: AC 22v-60v or 45v-90v Optional
Output Voltage: 100V 110V 120V 220V 230V 240V auto
Output Frequency: 45-65Hz
Standby Power Consumption: <0.5w
Total Harmonic Distortion: <5%
Peak Inverter Efficiency: 92%
MPPT Efficiency: 99%
Power Factor: 0.99
Output Wave Form: Pure Sine Wave
Featured Refinements: MPPT
Bundle Listing: No

Category: 1000w | Comments Off

November 10

2000W Solar On Grid Tie Inverter With Limiter Solar Panels Home System

You may also like. 2000W Solar On Grid Tie Inverter With Limiter Solar Panels Home System. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Gereantion 2000w Standard Solar Power Grid Tie Inverter. -with Limiter / Sensor , Battery Discharge Power Mode. -AC 220V 230V 240V (auto selected). – for USA 240VAC connection , please see photo below. SGPV and Grid Tie Inverter. SGPV – small solar grid tie inverter and solar panels. The inverter can obtain the solar energy from solar panel, and tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. When the sun shines, the solar panels will produces DC voltage, and the grid tie inverter will change the DC voltage to AC voltage and puts out power to the home grid. The electric apparatus in the house will use power from the inverter first. The power meter will SLOW down. Advantage of the 2G grid tie inverter? The 2nd Generation grid tie inverter, new technical , Higher efficiency. Higher MPPT efficiency , Max 99%. Multiple intelligent protection to ensure safe use. Wide DC input voltage , suitable for all types solar panels. Easy to install and easy to operate. UL1741, IEEE1547, VDE4105 standards. Power Limiter function , Battery discharge function support. Pure sine wave form output , THD < 5%. Input DC Voltage Range. Peak power tracking voltage. AC Output Voltage Range. Dimensions (W x H x D). How to use the grid tie inverter? 1 unit inverter installation / more units inverters in parallel. The inverter AC output can be connected in the AC plug of grid in the house. LCD display and operation. Bat or solar limited current mode. This function is usable while using with battery. The setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level. MPPT function of the inverter will auto invalid when working under this setting. Set is 0.1V/step. Set is 0.1V/Step. Note : Limiter model must use limiter sensor/clamp , there is not limiter sensor and clamp with this model inverter. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then powe will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Optional Function : Wi-Fi port. (Only for Business Express). We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. The item "2000W Solar On Grid Tie Inverter With Limiter Solar Panels Home System" is in sale since Sunday, September 30, 2018. This item is in the category "Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters". The seller is "solarregulator" and is located in Shenzhen. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

Brand: SUN
MPN: SUN-2000G2TIL-B
Country/Region of Manufacture: China
Input Voltage: 45v-90v
Output Voltage: AC 220V 230V 240V auto
Output Frequency: 45-65Hz
Standby Power Consumption: <0.5w
Total Harmonic Distortion: <5%
Peak Inverter Efficiency: 92%
MPPT Efficiency: 99%
Power Factor: 0.99
Output Wave Form: Pure Sine Wave
Limiter Sensor Cable: 3m
Weight: 5.5kg
Dimensions (W x H x D): 434x196x88 mm
Internal Limiter: Built-in
Featured Refinements: MPPT
Model: SUN-2000G2TIL-B

Category: 2000w | Comments Off

November 6

Home Made Vs Professional House Solar System Grid Tie Inverter With Power Limiter

Category: home | Comments Off

October 16

600W 24V DC to 110V AC Waterproof Grid Tie Power Inverter for Home System

Home & Farm Appliances. You may also like. 600W DC 24V – AC110V Waterproof Grid Tie Power Inverter Solar Panel System Home. One 600W 24V-110V waterproof inverter. 1 pouch of screw for micro inverter installation. Please connect the inverter following the operation instruction show above. If have any question please contact with relative persons. Non-professionals do not disassemble. Only qualified personnel may repair this product. Please install inverter in the low humidity and well-ventilated place to avoid the inverter over-heating, and clear around the inflammable and explosive materials. When using this product, avoid children touching, playing, to avoid electric shock. LED flashing in the process of being working condition: inverters connected to AC & DC sides. Red LED light 3. Recommend use PV panels. 600W / Vmp>34V / Voc<50V. DC MAX input current. AC MAX output power. DC MAX Open-circuit input-voltage. DC input voltage range. MAX output power factor. DC input Reverse voltage protection. AC output voltage range. 49.3-50.5 Hz. Output short circuit protection. Power line carrier-current communication. DIN VDE 1026 UL1741. Power line carrier-current communicationthis is optional function, please confirm the spec outside the box first. By using electric power as a carrier of AC alternating current, can modulate high-frequency and carrier frequency (60KHz) in AC wire transmission and can achieve the communication/ newsletter between inverters or between inverter and computer. And it can transfer the power data. Also monitor all functions of inverter. Carrier frequency 60KHZ(Frequency customizable). Interface way TTL level serial interface. Serial rate 9600PS(Can customize according to customer's request). 6-grade power search---In overcast weather, the PV Panel's output current is extremely tiny, then inverter will automatic pen 6-grade power search function, and keep output efficient and steady during the low power. Wide voltage input(22-50VDC)--- 1. DC voltage input:2250VDC; 2. Second level power variable voltage conversion. High-frequency two-way and one-way grid function---1. High frequency direct modulation, AC half wave synthesis; 2. Two-way grid means: Load consume directly. And can reverse AC current transmission. Frequency range: 45Hz 64Hz. Directly connected to the solar panels (do not need to connect the battery). AC 0 angle with high precision auto-detection---High-precision analysing the AC phase angle. The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together. AC phase shift: < 1%; 2. Over-zero protection: 0.2 VAC; 3. AC switching: 50Hz / 60Hz. Modulation synthesis: half wave and full-bridge modulation synthesis (100Hz / 120Hz). Synthetic way: MOSFET full-bridge; 3. Pure Sine Wave Output---Use SPWM directly to make pure sine wave output. Output waveform: Adopt complementary PWM to push-pull pure sine wave; 2. Generate means: enhancement-mode SPWM. Power Automatically Locked (APL)--- automatically powers locked in maximum power point, made output more stable. Constant Current, Constant Power---constant current and output power, without any overload, over-current phenomenon. Exactly and timely automatic Island Effect Protection. High-Frequency High Conversion Rate--- Adapt high frequency converter, the output more efficient. Maximum Power Point Tracking (MPPT)--- high-precision (MPPT) operation power, automatic and immediate adjust the solar panels output power at the maximum output point, made the inverter discharge to power grid with the highest efficiency. Stack using---Such as: 4 micro inverter of 260W stacking can achieve 1040W. The number of the stacking is unlimited. DC input---Input voltage range: 22V to 50V, PV Panel: Recommend using the power more than 30W and the standard voltage of 36V PV panels. Suggestion making the PV in parallel. Goods in stock in USA, goods will be set by UPS. Or USA customers the most important thing. We strive to serve our customers and resolve any issues. Appreciate the opportunity to correct any issues you have before you leave feedback. Pls visit my store. We do appreciate your consideration and looking forward to doing business with all the clients and companies. We are manufacturers and wholesalers of solar panels and renewable energy products. Our solar business has been established since 2002. OEM and ODM services are both available. We would like to be your best supplier in China. Please take our working time into account. We will reply you in time, if you are in our working time. If you don't receive our reply within one days, We must be out of work. Please contact me through. Public holidays in China is not available for message reply. The item "600W 24V DC to 110V AC Waterproof Grid Tie Power Inverter for Home System" is in sale since Tuesday, March 14, 2017. This item is in the category "Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters". The seller is "ahatools" and is located in Walton, Kentucky. This item can be shipped worldwide.

Brand: ECO-WORTHY
MPN: GI600-24120IP65-1
Country/Region of Manufacture: China
output voltage: 80-160V
Waterproof class: IP65
Standby Power: <1W
DC input voltage range: 24V/22~50VDC
Package Include: 1 PCS Waterproof Grid Tie Inverter
DC MAX Input Current: 40A
Certificate: CEC
UPC: 607052790387

Category: 600w | Comments Off

October 12

800W Grid Tie Solar Power System 8pcs 100W Solar Panel with 1200W Inverter Home

Here for sale is 800W solar grid-tied system with 8100W poly solar panel and 1200W 24V-110V waterproof inverter. Perfect for 24 volt battery charging, great for industry, agriculture & home. 8pcs 100W poly solar panel. 1pc Waterproof 1200W 24-110V grid tie inverterWe also provide 220V. 100W 18V poly solar panel. Open Circuit Voltage(Voc). Short circuit current (Isc). 90% within 10 years 80% within 25 years. Kind of glass and its thickness. Low Iron, high transparency tempered glass of 3.2mm. 665x1000x35mm26.2″x39.4″x1.4. 1200W 24-110V grid tie. Recommend use PV panels. 600W / Vmp>34V / Voc<50V. DC MAX input current. AC MAX output power. DC MAX Open-circuit input-voltage. DC input voltage range. MAX output power factor. DC input Reverse voltage protection. AC output voltage range. 49.3-50.5 Hz. Output short circuit protection. Refer to "LED Display". Power line carrier-current communication. DIN VDE 1026 UL1741. The item "800W Grid Tie Solar Power System 8pcs 100W Solar Panel with 1200W Inverter Home" is in sale since Wednesday, September 12, 2018. This item is in the category "Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Solar Panels". The seller is "17winsunpower" and is located in Rowland Heights, California. This item can be shipped worldwide.

Brand: 17WINSUNPOWER
Model: 800W Grid tie solar system
MPN: ECO-P100
Wattage: 800W
Features: Corrosion Resistant
Application: Boat/RV/Vehicle
Type: Solar System/Kit
UPC: 607052794439
Inverter: 1200W 24V waterproof grid tie inverter

Category: 800w | Comments Off

October 10

2000W Solar System 20pcs 100W Solar Panel & 2KW Grid Tie Inverter Charging Home

Here for sale is 2000W solar system kit w/ 20pcs 100w solar panel & 2000w grid tie solar power inverter. This system is for charging home power applications water pumpPCTVLED light etc.. For the 2000W 220V grid tie power inveter, it is our newest power inverter. Limiter & MPPT function makes the solar system durable & efficiency. For the 100W poly solar panel with its high power output and the robust design the right solution for a stand-alone system. Even on cloudy days, the poly solar panel delivers a high energy yield. The panel is covered by a special tempered glass to protect against environmental conditions such as hail, snow and ice. The panel frame made of anodized aluminum ensures the stability. High modules conversion efficiency. Excellent performance in low light environments. Fully self powered off-grid systems. Suitable for commercial and power station property. 100W 18V Poly Solar Panel. Open circuit voltage (Voc). Max power voltage (Vpm). Short circuit current (Isc). Temperate coefficient of Isc. (010+/- 0.01)%/. Temperate coefficient of Voc. (0.38 +/-0.01)%/. Temperate coefficient of power Voc. 90% with in 10 years. 80% with in 25 years. Kind of glass and its thickness. Low Iron, high transparency tempered glass of 3.2mm. 665x1000x35mm(26.2″x39.4″x1.4). 2000W Grid Tie Power Inverter. AC Output Voltage Range. AC Output Frequency Range. 51.5x30x15cm(20.3″x11.8″x5.9). 1 pc 10m solar cable w/ 1 pair MC4 connector. For movable, suspended or fixed installation in photovoltaic systems at temperatures ranging from -40 to +120 For use indoors, outdoors, in explosive areas, and in industrial, commercial, and agricultural applications. Which with 3 male and 3 female of MC4 connector. To Connect Each Solar Panel in Series or in Parallel. One Male/Male/Female(MMF) Branch Connector One Female/Female/Male(FFM) Branch Connector. 20pcs 100W Poly Solar Panel. 1pcs 2000W 220V Grid Tie Power Invertr. 1 pair 5m solar cable. 4 pairs Y MC4 connectors. The item “2000W Solar System 20pcs 100W Solar Panel & 2KW Grid Tie Inverter Charging Home” is in sale since Thursday, September 6, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Solar Panels”. The seller is “renewtopsolar” and is located in Los Angeles, California. This item can be shipped worldwide.

Brand: ECO-WORTHY
Model: Gird Tie Solar System
MPN: ECO-L02P100-IM-20
Wattage: 2000W
Features: Corrosion Resistant
Application: Home/Garden
Voltage: 24 V
Type: Solar System/Kit
UPC: 607052788476
EAN: 0607052788476
Note: FOR 220V OUTPUT VOLTAGE

Category: 2000w | Comments Off

October 1

Renogy 1.2KW Mono Solar Panel Kit 1200W Grid Tie System Micro Inverter Home DIY

Renogy 1.2KW Grid-Tied Monocrystalline Solar Panel Kit. Looking to become more energy efficient? Switching to solar and installing a grid-tied system is a great way to keep your electricity bill low while embracing clean energy. This 1200W Grid-Tied Basic Solar Kit comes with four highly efficient black frame Renogy 300 Watt 24 Volt Solar Panels, 4 Enphase IQ6+ Microinverters, IQ cables, and a IQ terminator cap. The included PERC solar cells are efficient and help make the panel smaller and lighter. Compared to a regular 72 cell 300 watt panel this panel is 15-20% shorter and lighter. We offer residential and commercial solar kits that include all of the necessary system components that you’ll need for your setup, from charge controllers to inverters, railings to cables, and more. These kits are suitable for both on-grid and off-grid applications, allowing you the flexibility to pick the system which best fits your needs. Extra thick anti-reflective, high transparency, low iron-tempered glass with enhanced stiffness and impact resistance. EL tested solar modules; no hot-spot heating guaranteed. Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades. Authorized UL 1703 photovoltaic modules and panels. TPT back sheet ensures smooth performance over a long period of time. IP65 rated junction box provides complete protection against environmental particles and low-pressure water jets. Excellent performance in low-light environments. High Efficiency PERC Solar Cells, Black frame solar panel. Perfect for residential and commercial rooftop systems to decrease your electrical bill, or for large off-grid systems as well. Renogy 300W 24V Monocrystalline Solar Panel. Optimum Operating Voltage (Vmp): 32.25V. Optimum Operating Current (Imp): 9.33A. Weight: 42.8 lbs. Commonly used module pairings: 235W-400W+. Maximum continuous output power: 280VA. Peak power tracking voltage: 27V-45V. Max Nominal Voltage: 250VAC. Connector Spacing: 2.0M (6.5 ft). PV Module Orientation: Landscape (60-cell). Connector Count per Box: 240. Enphase IQ Terminator Cap. Dimensions: 2 X 0.5 X 0.5 In. Weight: 0.03 lbs. Renogy was founded on the strong belief that solar power should be available to everyone, anywhere on the planet. Thus we strive to offer clean energy for every application and will customize according to different needs. We use top quality solar cells and superior accessories to produce high performance solar modules that maximize the energy yield of the solar system per unit area, thereby reducing the system cost per watt for you. Glass: 3.2mm tempered glass, excellent mechanical loading performance, resists 5400PA snow loads and 2400PA wind load. EVA Film: main component is 30%-33% of EVA, which assures a high transmission, strong adhesion and long term performance. Cell: excellent performance in low light environment and high conversion efficiency guaranteed. Frame: strong corrosion resistant aluminum frames. Backsheet: both sides of backsheet are coated with fluoro resin to prevent aging. This unique structure allows our backsheet to provide perfect adhesion with EVA and junction box. QUALITY ASSURANCE Industry-leading Testing Approved (Under UL1703, IEC 61215, IEC 61730 Standards). Thermal/Freezing and High Humidity Cycling Test. Mechanical, Wind and Twist Loading Test. Light and Water-exposure Test. Moist Carbon Dioxide/Sculpture Dioxide. Please note that we won’t be able to process any order with PO Box address for any size of solar panel. Anything outside of this policy requires special authorization. Other Items You Might Be Interested In. Lithium Iron Phosphate Battery. Deep Cycle Gel Battery. Pure Sine Wave Power Inverter. The item “Renogy 1.2KW Mono Solar Panel Kit 1200W Grid Tie System Micro Inverter Home DIY” is in sale since Thursday, September 13, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Solar Panels”. The seller is “renogy_solar” and is located in Ontario, California. This item can be shipped to United States.

Model: 1200W Mono Solar Panel Grid Tie Kit
Modified Item: No
Custom Bundle: Yes
Wattage: 1200
Featured Refinements: Solar Panel System
Type: Solar System/Kit
Features: All Daylight Conditions
MPN: RNG-KIT-GRID1200D-NONE
Brand: Renogy
Non-Domestic Product: No
Application: Home/Garden
Bundle Description: this kit includes 4 highly efficient black frame Renogy 300 Watt 24 Volt Mono Solar Panels, 4pcs Enphase IQ6+ Microinverters, 4pcs IQ cables, and a IQ terminator cap

Category: renogy | Comments Off

September 29

Renogy 3KW Mono Solar Panel Grid Tie Kit 3000W Home Shed System Micro Inverter

Renogy 3.0KW Grid-Tied Monocrystalline Solar Panel Kit. This on-grid solar power kit can be used for a home or office building. The Renogy 300W Solar Panels included in this kit are both dependable and affordable, allowing for a great return on investment. This 3000W Grid-Tied Basic Solar Kit comes with ten highly efficient black frame Renogy 300 Watt 24 Volt Solar Panels, 10 Enphase IQ6+ Microinverters, IQ cables, and a IQ terminator cap. The included PERC solar cells are efficient and help make the panel smaller and lighter. Compared to a regular 72 cell 300 watt panel this panel is 15-20% shorter and lighter. We offer residential and commercial solar kits that include all of the necessary system components that you’ll need for your setup, from charge controllers to inverters, railings to cables, and more. These kits are suitable for both on-grid and off-grid applications, allowing you the flexibility to pick the system which best fits your needs. Extra thick anti-reflective, high transparency, low iron-tempered glass with enhanced stiffness and impact resistance. EL tested solar modules; no hot-spot heating guaranteed. Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades. Authorized UL 1703 photovoltaic modules and panels. TPT back sheet ensures smooth performance over a long period of time. IP65 rated junction box provides complete protection against environmental particles and low-pressure water jets. Excellent performance in low-light environments. High Efficiency PERC Solar Cells, Black frame solar panel. Perfect for residential and commercial rooftop systems to decrease your electrical bill, or for large off-grid systems as well. Other Items You Might Be Interested In. Lithium Iron Phosphate Battery. Deep Cycle Gel Battery. Pure Sine Wave Power Inverter. The item “Renogy 3KW Mono Solar Panel Grid Tie Kit 3000W Home Shed System Micro Inverter” is in sale since Thursday, September 20, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Solar Panels”. The seller is “renogy_solar” and is located in Ontario, California. This item can be shipped to United States.

Model: 3000W Mono Solar Panel Grid Tie Kit
Modified Item: No
Custom Bundle: Yes
Wattage: 3000
Featured Refinements: Solar Panel System
Type: Solar System/Kit
Features: All Daylight Conditions
MPN: RNG-KIT-GRID3000D-NONE
Brand: Renogy
Non-Domestic Product: No
Application: Home/Garden
Bundle Description: this kit includes 10 highly efficient black frame Renogy 300 Watt 24 Volt Mono Solar Panels, 4pcs Enphase IQ6+ Microinverters, 4pcs IQ cables, and a IQ terminator cap

Category: renogy | Comments Off

December 2024
M	T	W	T	F	S	S
« Nov
						1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	29
30	31