June
21
March
6
1000W WATT Wind Turbine Generator Grid Tie Inverter 3 Phase 22-60V to AC110V
Due to the low wind area I live in, this has less than an hour of “load” time. So here is the story: This is basically brand new. It was lightly used on my wind turbine. I now want to go solar instead, so here is your opportunity to get a good deal. It works great and there is nothing wrong with it. What I did was hook a 600 and a 1000W together so when during high winds. The 600 would kick off and the 1000W would take over. Question: Please elaborate the “kick off” part. The alternator/generator of your turbine will make power – regardless. It is all about harnessing that. Power and protecting the turbine from itself when you cannot. Lets say you have an alternator that. Makes power from 0V to 100V. You can either harness that entire spectrum, or dump it into a dump. Load when you cannot. I had a dual PMA that essentially produced a maximum of 2x1000W. The 600W inverters harnessed 10.8V. To 30V and then switched to dump the load. I did not have it connected to a dump load here yet. Because when the power reached over 30V I also connected the 1000W which harnessed 22V-60V. What would happen is instead of dumping the load at the 600W inverters, the 600W inverter would. Switch off because it was over powered and trying to dump the load and then at that time the 1000W. Inverters were absorbing and “converter-ing” see what I did there? -P the power production of the. I had the 1000W inverters connected to a dump load in case the power production ever. I essentially would have liked to have had some 1500W inverters too and dumped the. Load after that and I would have had a voltage spectrum coverage from 10.8V all the way up to 90V. All you do is jump-connect all the. Inputs together on the turbine side of inverter starting at the direct input connect on the 600W from. The 1500W inverter into a dump load. 600 jumped to the 1000W up to the 1500W if you so desire. Long story short, by connecting all of them together, you make a “single” “inverter” that works from. 10.8V to 90V. I hope this makes sense, I tried my best to simplify it. Yes it worked great! Not broken and they work perfectly fine. I just want to do solar instead now. Revision: 1/26/2016 – I made a mistake with the description, it is 3 phase to DC. Also, I copied the wrong photo and have fixed that as well. Furthermore, as to me living in a low wind area, these 1000W inverters have less than an hour of load time on them! This 1000W micro grid tie inverter is designed specially for small wind energy system. This inverter can directly connect wind charger through inverter to home grid. This inverter has been built in dump load controller, it can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too strong, and the dump load controlling system can not keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. Features MPPT (Maximum Power Point Tracking) allowing each Wind turbine to run at optimum output. Connect Wind Turbines DC supply cables to the DC input terminal of the inverter, be sure that the polarity is correct. Recommended DC input cable size for maximum output is 8AWG or cables that can handle more than 30A. Optimal length would be less than 8m , longer cables will experience higher voltage drop. The range of output power of wind generator is 20W1000W. Connect the supplied AC power cord to the inverter and plug it to a home wall socket. The 3 green LED indicators will start to cycle from left to right when the grid and DC supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being output from the solar panels or the wind turbine. The more big output power is, the more fast the rate is. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, this is called Island Protection. The item “1000W WATT Wind Turbine Generator Grid Tie Inverter 3 Phase 22-60V to AC110V” is in sale since Saturday, March 05, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “carnilvr79″ and is located in Rochester, Washington. This item can be shipped to United States.
- Brand: Sun
- Model: SUN-1000G-WAL
February
17
600W WATT Wind Turbine Generator Grid Tie Inverter DC10.8-30V AC110V, Stackable
600W Wind Turbine Generator Grid Tie Inverter DC 10.8-30V to AC 110V. This 600W micro grid tie inverter is designed specially for small wind energy system. This inverter can directly connect wind charger through inverter to home grid. This inverter has been built in dump load controller, it can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too strong, and the dump load controlling system can not keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. Features MPPT (Maximum Power Point Tracking) allowing each Wind turbine to run at optimum output. The grid-tie inverter can transfer wind energy from wind generators directly into the home grid using no extra equipment. It can be connected to any outlet (conventional network) in the home. The grid-tie inverter controls the phase and the frequency and voltage of the power generated by the wind generator. It produces a pure sine-wave and matches that of the grid. There are 4 terminals on the left side of the inverter, 1 red terminals and 1 black will be connected to the phase output from the wind turbine, and 2 black terminals will be connected to dump load resistors. There are 4 LED indicators, 3 green indicators and 1 red indicator, 3 green LED indicators will start to cycle from left to right when the grid and AC input supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being output from the wind turbine. The bigger the output power is, the faster the rate is. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, this is called Island Protection. 10.8V 30V DC NOT AC. No need return the original one for low-valued items. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! Pleas message us if recipient address changes needed before we fulfill the order. Sorry, no local pickups available. The free listing tool. The item “600W WATT Wind Turbine Generator Grid Tie Inverter DC10.8-30V AC110V, Stackable” is in sale since Tuesday, July 30, 2013. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “chargerangel” and is located in Hayward, California. This item can be shipped to United States, to Canada, to Mexico.
- Type: Grid Tie Inverters
- Energy Type: Wind
February
2
1000W WATT Wind Turbine Generator Grid Tie Inverter 3 Phase 22-60V to AC110V
Due to the low wind area I live in, this has less than an hour of “load” time. So here is the story: This is basically brand new. It was lightly used on my wind turbine. I now want to go solar instead, so here is your opportunity to get a good deal. It works great and there is nothing wrong with it. What I did was hook a 600 and a 1000W together so when during high winds. The 600 would kick off and the 1000W would take over. Question: Please elaborate the “kick off” part. The alternator/generator of your turbine will make power – regardless. It is all about harnessing that. Power and protecting the turbine from itself when you cannot. Lets say you have an alternator that. Makes power from 0V to 100V. You can either harness that entire spectrum, or dump it into a dump. Load when you cannot. I had a dual PMA that essentially produced a maximum of 2x1000W. The 600W inverters harnessed 10.8V. To 30V and then switched to dump the load. I did not have it connected to a dump load here yet. Because when the power reached over 30V I also connected the 1000W which harnessed 22V-60V. What would happen is instead of dumping the load at the 600W inverters, the 600W inverter would. Switch off because it was over powered and trying to dump the load and then at that time the 1000W. Inverters were absorbing and “converter-ing” see what I did there? -P the power production of the. I had the 1000W inverters connected to a dump load in case the power production ever. I essentially would have liked to have had some 1500W inverters too and dumped the. Load after that and I would have had a voltage spectrum coverage from 10.8V all the way up to 90V. All you do is jump-connect all the. Inputs together on the turbine side of inverter starting at the direct input connect on the 600W from. The 1500W inverter into a dump load. 600 jumped to the 1000W up to the 1500W if you so desire. Long story short, by connecting all of them together, you make a “single” “inverter” that works from. 10.8V to 90V. I hope this makes sense, I tried my best to simplify it. Yes it worked great! Not broken and they work perfectly fine. I just want to do solar instead now. Revision: 1/26/2016 – I made a mistake with the description, it is 3 phase to DC. Also, I copied the wrong photo and have fixed that as well. Furthermore, as to me living in a low wind area, these 1000W inverters have less than an hour of load time on them! This 1000W micro grid tie inverter is designed specially for small wind energy system. This inverter can directly connect wind charger through inverter to home grid. This inverter has been built in dump load controller, it can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too strong, and the dump load controlling system can not keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. Features MPPT (Maximum Power Point Tracking) allowing each Wind turbine to run at optimum output. Connect Wind Turbines DC supply cables to the DC input terminal of the inverter, be sure that the polarity is correct. Recommended DC input cable size for maximum output is 8AWG or cables that can handle more than 30A. Optimal length would be less than 8m , longer cables will experience higher voltage drop. The range of output power of wind generator is 20W1000W. Connect the supplied AC power cord to the inverter and plug it to a home wall socket. The 3 green LED indicators will start to cycle from left to right when the grid and DC supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being output from the solar panels or the wind turbine. The more big output power is, the more fast the rate is. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, this is called Island Protection. The item “1000W WATT Wind Turbine Generator Grid Tie Inverter 3 Phase 22-60V to AC110V” is in sale since Tuesday, February 02, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “carnilvr79″ and is located in Rochester, Washington. This item can be shipped to United States.
- Brand: Sun
- Model: SUN-1000G-WAL
January
26
200W 300W 500W 800W 1000W Wind Turbine Generator Grid Tie Power Inverter
Motor & Car Accessories. Input voltage range: 24V to 30V. Standard voltage of wind turbine: 24V. Voltage range of the inverter whose output is 110V AC. Wind voltage input(24V-30V). DC Voltage input : 24-30VDC. Second level power variable voltage conversion. High-frequency two-way and one-way grid function. High frequency direct modulation, AC half wave synthesis. Two-way grid means: Load consume directly. And can reverse AC current transmission. Vector wind speed automatic control. Adopt precise vector wind speed automatic control function. In different wind speeds, the output voltage of wind power generator is different. It means the output voltage is not stable in the long run. Its very hard to control working condition in the steady state whether for the battery control or inverter system. Because of the unsteady voltage of the. Wind turbine, the inverter using load for automatic control wind power generator speed, at high speed, load increasing, at low speed, load corresponding reducing. It could make the wind power generator in a constant speed state and control the output voltage at stability of wind power generator. He same time it could make the wind generator power of all the output to the load! Then greatly improve the efficiency of wind power and its utilization rate of increase! The experiment shows that this system could make the. Utilization rate of wind power up by more than 40%. And do not need to connect battery. Speed automatic control: the precision is 0.1 V. Power lock:10W(AC output). AC 0 angle with high precision auto-detection. AC phase angle of 0 through isolation amplifier then input to the MCU for high-precision detection and analysis. The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together. AC phase shift: < 1%. Over-zero protection: 0.2 VAC. In the process of the grid, usually adapt the same phase angle in parallel. Ie, When the two-phase alternating current total is equal to 0. Use switch to combination the two AC fusion and the product is rectified AC half-frequency AC to 100Hz first, then the machine use the high frequency current in the circuit and semi-100Hz frequency alternating current generated combination, to achieve high-frequency modulation. Modulation synthesis: half wave and full-bridge modulation synthesis (100Hz / 120Hz). Synthetic way: MOSFET full-bridge. Pure Sine Wave Output. Use SPWM directly to make pure sine wave output. Output waveform: Adopt complementary PWM to push-pull pure sine wave. Generate means: enhancement-mode SPWM. Automatically Adapt To Different Load Power Factor. Adapt to any of the power load. Constant Current, Constant Power. This product is constant current, constant output power, without any overload, over-current phenomenon. Automatically Shut Down When The Power Grid Fault. When the city power system is in failure, the inverter will automatically turn off the output. Current limit, this product is constant current, constant output power, without any overload, over-current phenomenon. Multiple small power inverters in parallel can achieve large output power. High-Frequency High Conversion Rate. Adapt high frequency converter, the output more efficient. One certificate of quality. One AC power line. In order to achieve higher power use requirements, this product can be stacked, such as: 4 grid inverter260W stacking can achieve 1040W. And the number of the stacking is unlimited. A Powr failure display. LED in red : 1. Power cut off 2. DC low-voltage display (protection). DC over-voltage display (protection). Over temperature display (protection). B Power adjust display. LED in green and steady, it means the power is locked and the inverter works. Maximum input current (DC). Maximum output power factor. Output short circuit protection. AC standard voltage range. 90V-140 VAC / 180260VAC. We have warehouses in the USA, UK, DE and AU. For those customers who live in the US, UK, DE, EU and AU, we will send item from the corresponding warehouse. For those customers who live in other countries, we will send item from our foreign warehouses if available, otherwise from China. E-mails are answered Monday through Saturday. Please allow up to 48 hours for a response to your message 3. Best Prices: By avoiding too many other companies marketing and packaging costs, we deliver the same quality products at a fraction of the cost. Our products are also tested for quality assurance purposes(CE etc). We trust that you will have a happy experience when shopping with us! We appreciate your business! The item "200W 300W 500W 800W 1000W Wind Turbine Generator Grid Tie Power Inverter" is in sale since Tuesday, November 17, 2015. This item is in the category "Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters". The seller is "sunshinesmileservice" and is located in Walton, Kentucky. This item can be shipped worldwide.
- Brand: Unbranded
- MPN: Does not apply
January
18
500W 10.5-28VDC 190-260VAC Grid Tie Inverter for Solar Panel Power Generator
500W 10.5-28VDC 190-260VAC Grid Tie Inverter for Solar Panel Power Generator. 500W Grid Tie Solar Power Inverter 10.5-28VDC. 1x 500W Grid Tie Inverter 10.5-28VDC. 1x Mains Power Cable (UK/EU). Converts DC to AC with a sine wave, frequency and phase the same as that of the power grid. A key device for power generation systems such as PV power generation systems and wind turbine power generation systems. Compatible with a 36 cell solar panel with Vmp 18-21V and Voc 20-24V. Maximum Power Point Tracking (MPPT), 99% efficient. Automatic Adaption To Different Load Power Factors. Multiple small power inverters connected in parallel can achieve a larger output power. Pure Sine Wave Output. Aluminium alloy housing (no rust, good temperature resistance and anti corrosive). Easy to install, can be simply attached to the rack underneath a PV module. Available UK/EU Plug depending on your postal address. SEE HERE FOR USER MANUAL. Please note, international deliveries will cost substantially more than inland UK deliveries. Can I collect an order from you in person? Our office is based in Birmingham. You are welcome to come to our office and collect your order. However, please notify us beforehand so we can arrange this. Please note, your order must be placed before 3pm to ensure it is sent out on the same day. I havent received my parcel yet? Also please check with your neighbours and local sorting office to see if they have it waiting for you. Can I cancel my order? We offer a 14 day cancellation period, beginning the day after the day on which you receive your item. Please return the goods in the same condition they were sent. My Item is damaged or faulty. If we cannot diagnose, we may ask you to return it to us. How do I contact you? Contacting us this way will help us track your order and process your query as quickly as possible. For returning items please send to. Unit 9 Waterside Business Park. I have a technical query. It must be noted however, we do not claim to have answers or solutions to everything, as we are primarily a wholesale company we can only offer a reasonable amount of assistance, so please be understanding. Our response time for technical queries may take a few days, due to the high number of emails we receive; however we endeavour to respond so please be patient. Etang Limited is a UK based company in the heart of the Midlands. We sell a wide selection of electrical goods and tech equipment at wholesale prices. Our products range from RC equipment to 3D printing equipment and Arduino parts, plus many other useful gadgets and tools. We strive to offer a great service through our customer care and providing quality products at competitive prices. Orders over 2kg in weight will be dispatched using an alternative courier service. Also check with your neighbours and local sorting office to see if they have it waiting for you. In cases were an order is deemed to be high risk due to price or location, the signed for option will be enforced for added security. To qualify for this we ask you place your order by 3pm so we have time to process it. PLEASE NOTE: we have a 14 day return period policy for all our goods, extending to 30 days in extreme circumstances. Damaged or Faulty Goods. We care about our customers and understand the concerns and frustrations you might have, but please be patient. THIS WILL NOT ONLY HELP US GROW, BUT ENABLE US TO PROVIDE YOU WITH A BETTER VARIETY OF PRODUCTS IN THE FUTURE. Our company address for all matters is. The item “500W 10.5-28VDC 190-260VAC Grid Tie Inverter for Solar Panel Power Generator” is in sale since Monday, May 19, 2014. This item is in the category “Home, Furniture & DIY\DIY Materials\Solar Panels”. The seller is “etang_uk” and is located in Birmingham. This item can be shipped to all countries in Europe, to United States, to Canada, to Australia.
- Type: Grid Tie Inverter
- Power Output: 500W
- DC Input: 10.5-28V
- AC Output: 190-260V
- Vmp Range: 18-21V
- Voc Range: 20-24V
- MPPT DC Range: 15-23V
- Size: 210x165x53mm
- Weight: 1.3kg
January
17
500W 24-60VDC 190-260VAC Grid Tie Inverter for Solar Panel Power Generator
500W 15-60VDC 190-260VAC Grid Tie Inverter for Solar Panel Power Generator. 500W Grid Tie Solar Power Inverter 24-60VDC. 1x 500W Grid Tie Inverter 24-60VDC. 1x Mains Power Cable (UK/EU). Converts DC to AC with a sine wave, frequency and phase the same as that of the power grid. A key device for power generation systems such as PV power generation systems and wind turbine power generation systems. Compatible with a 72 cell solar panel with Vmp 35-39V and Voc 42-46V. Maximum Power Point Tracking (MPPT), 99% efficient at 25-48V. Automatic Adaption To Different Load Power Factors. Pure Sine Wave Output. Multiple small power inverters connected in parallel can achieve a larger output power. Aluminium alloy housing (no rust, good temperature resistance and anti corrosive). Easy to install, can be simply attached to the rack underneath a PV module. Available UK/EU Plug depending on your postal address. SEE HERE FOR USER MANUAL. Please note, international deliveries will cost substantially more than inland UK deliveries. Can I collect an order from you in person? Our office is based in Birmingham. You are welcome to come to our office and collect your order. However, please notify us beforehand so we can arrange this. Please note, your order must be placed before 3pm to ensure it is sent out on the same day. I havent received my parcel yet? Also please check with your neighbours and local sorting office to see if they have it waiting for you. Can I cancel my order? We offer a 14 day cancellation period, beginning the day after the day on which you receive your item. Please return the goods in the same condition they were sent. If we cannot diagnose, we may ask you to return it to us. How do I contact you? Contacting us this way will help us track your order and process your query as quickly as possible. It must be noted however, we do not claim to have answers or solutions to everything, as we are primarily a wholesale company we can only offer a reasonable amount of assistance, so please be understanding. Our response time for technical queries may take a few days, due to the high number of emails we receive; however we endeavour to respond so please be patient. Etang Limited is a UK based company in the heart of the Midlands. We sell a wide selection of electrical goods and tech equipment at wholesale prices. Our products range from RC equipment to 3D printing equipment and Arduino parts, plus many other useful gadgets and tools. We strive to offer a great service through our customer care and providing quality products at competitive prices. Orders over 2kg in weight will be dispatched using an alternative courier service. Also check with your neighbours and local sorting office to see if they have it waiting for you. In cases were an order is deemed to be high risk due to price or location, the signed for option will be enforced for added security. To qualify for this we ask you place your order by 3pm so we have time to process it. PLEASE NOTE: we have a 14 day return period policy for all our goods, extending to 30 days in extreme circumstances. We care about our customers and understand the concerns and frustrations you might have, but please be patient. THIS WILL NOT ONLY HELP US GROW, BUT ENABLE US TO PROVIDE YOU WITH A BETTER VARIETY OF PRODUCTS IN THE FUTURE. Our company address for all matters is: Etang Ltd Unit 9 Waterside Business Park 1649 Pershore Rd Birmingham B30 3DR (UK). The item “500W 24-60VDC 190-260VAC Grid Tie Inverter for Solar Panel Power Generator” is in sale since Monday, May 19, 2014. This item is in the category “Home, Furniture & DIY\DIY Materials\Solar Panels”. The seller is “etang_uk” and is located in Birmingham. This item can be shipped to all countries in Europe, to United States, to Canada, to Australia.
- Type: Grid Tie Inverter
- Power Output: 500W
- DC Input: 24-60V
- AC Output: 190-260V
- Vmp Range: 35-39V
- Voc Range: 42-46V
- MPPT DC Range: 25-48V
- Size: 210x165x53mm
- Weight: 1.3kg
December
27
12V Charge Controller Fo PMA Wind Generator Air-X Ametek Solar GRID TIE INVERTER
Charge Controller For Solar & Wind Hybrid Systems. Item is located in our USA / Canada warehouse. Canadian buyers are required to pay GST/HST. Everything in the picture are included. Over the past few decades, as technology advances to improve our living, so does our demand for energy skyrockets. The usage of fossil fuel and nuclear energy has resulted in global warming, acid rain, melting of the polar cap and radiation pollution, it seems like investing in renewable energy is the only way to ensure our next generation will survive and prosper. Of all the different kinds of renewable energy available today, solar and wind are the two most popular ones favored by homeowners due to their. Easy implementation and wide range of suitable sites. With the micro solar grid tie application being simplified by our GP2-400 Grid Tie Inverter, many people have started to think about feeding wind energy back to the grid with the popular Air-X and other homemade turbines using the same concept. However, after some investigations are being done, they are disappointed to find out that connecting wind to the grid is a whole different story. As we know, solar has relatively stable throughput from dawn to dusk. On the other hand, wind is unstable and volatile. The major challenge presented with wind energy is sometimes it can go on for days without a breeze, and sometimes there are burst of gusts that are strong enough to damage systems. Obviously, todays equipments are not designed to handle this inconsistency and it seems like there is something missing to complete the puzzle. Fortunately, this missing puzzle has been found. Introducing GreenergyStars latest developed product: SolarWind Hybrid RX, the state of the art charge controller that can handle solar and wind at the same time! Since Air-X is a popular wind turbine in North America, our development team has specifically tailored this controller to work with the Air-Xs charging system. In addition, as requested by popular demand, this controller will also work with Solar Panels and other AC/DC wind Turbine. Installation Reference – not to scale (No inverter, batteries, turbines and solar panels included in this listing). What is a SolarWind Hybrid R X Charge Controller? GreenergyStar SolarWind Hybrid RX is he most advanced charge controller in the market today. Unlike other hybrid controllers, this multipurpose device is designed to work with Southwest Windpower’s Air-X, 403, and 303 plus other 12V AC/DC turbines and solar panels. The SolarWind Hybrid RX has utilized microprocessor based control electronics, sophisticated monitoring software, high quality finned aluminum casing and an intuitive LED display design. It is designed to work with the. GreenergyStar branded grid-tie inverters. To send renewable energy generated by Air-X, 12V AC/DC Turbine and solar panels back to the grid in a stable, controlled and safe manner. The following list will summarize its major features. Hybrid system designed to work with Southwest Windpower’s Air-X, 403, and 303 plus other 12V AC/DC turbines and 12V solar panels. Compatible with GreenergyStar branded grid-tie inverters. Maximum power: 1000W (rated at 27V & 37.5A). System Voltage: 12V Nominal (see input / output sections for range). Microprocessor based control electronics to control charging, outputs and dump load. Dump load utilize Pulse-width modulation (PWM) switching technology to recover power during high wind periods. Manual Braking switch to isolate wind turbine from the system. Intuitive LED Display to reflect system status. Keeps battery in an optimum charged state. Prevents overcharge and over-discharge. Internal diode to prevent reverse current to solar panels or wind turbine at night. High quality finned aluminum casing to protect the interior and dissipate heat. Operating voltage & current on all terminals: 11.5V 27V, 0A 37.5A. Maximum input voltage & current on all terminals: 30V , 40A. Withstand voltage: 35V (anything above will damage controller). Stand-by power consumption: 0.1W. AC Turbine : For 3 phase AC turbine. The 3 wires from AC turbine can be connected to the terminals in no specific order. Built in rectifier will convert AC to DC. Can also be connected here as the rectifier accepts DC input as well. LED will turn Green when there is an active input source. DC Turbine : Recommend for Air-X since this terminal has the. LED will not turn on since the Air-X has its own (red) charging LED. LED will turn on when there is power coming in from the inputs. Input Protection & Specification. Manual Turbine lock to force dump load to turn on. Pulse Width Modulated Dump Load. Stay-Online Feature to keep Air-X up and running in low battery condition. Night Time Reverse current protection to prevent current going into wind turbine and solar panels. Over current Protection (40A Fuse). Operating output current: 37.5A. Total maximum output current: 40A. Maximum current on individual output: 30A. Voltage tolerance: +/- 5%. Maximum Output Power: 1000W (rated at 27V & 37.5A). Output starts when inputs are above 12.5V. OUTPUT A, B, C. LED will turn Orange with respect to each output. Battery is an input and an output at the same time. LED will turn Blue indicating battery is being charged. Overcharge protection Cut off voltage: 14.7V. Over-discharge protection Cut off voltage: 11.4V. Recommend using deep cycle batteries if possible. Normal lead acid batteries are acceptable as well. 3 charging modes: Continuous charging, Pulsing, Trickiling. Mode 1 – Power Supply. When input voltages are lower than the battery’s voltage, the battery will act as a supply to all outputs. Power to all outputs will be cut when the battery has drop down to 11.4V. Mode 2 – Stay Online (for Air-X only). When battery voltage is below 11.4V and input voltages is under 9V, even though all outputs will be cut, the charge controller will still send electrical pulse to the DC input terminal every 5 – 10 seconds as indicated by the pulsing Red. This is necessary for Air-X’s internal controller to stay on. Since the Air-X will not wake up on its own, without these pulses, even if wind starts blowing the Air-X will free spin and no power will be generated. Warning: Controller will get. If polarity of battery is incorrect. Requires a minimum of 1.2Ohm 600W resistive load to be connected to the dump load terminal. Dump load activates when AC Turbine is >= 27V. Unlike conventional dump loads that short circuit on activation and drop outputs to zero, the SolarWind Hybrid RX utilizes Pulse-width modulation (PDM) switching technology to only dump what is necessary and conserve the rest. (refer to Figure above). Activating dump load will slow down the AC turbine and reduce voltage spikes. Over voltage protection: All outputs will be cut when input voltage is over 30V. However dump load will stay on. LED will turn Red when the dump load has been activated. Manual Turbine Lock (Brake). Manual Turbine Lock is used to force dump load to fully turn on (ie: short circuit). Useful when it is necessary to isolate AC wind turbine from the system (ie: during installation or maintenance). Turbine lock is the red switch at the top-left corner of the Output Face (refer to Figure 1 on page 6). ” 0 ” – unlocks turbine. 25’C – 85’C. Dimension (L x W x H). 19.3 x 13.1 x 6.9 cm 7.5″ x 5.2″ x 2.7. Wall Mount at base. Convection cooled with fan (activate around 50’C 60’C). High quality finned aluminum to act as heat sink for fast heat dissipation. The item “12V Charge Controller Fo PMA Wind Generator Air-X Ametek Solar GRID TIE INVERTER” is in sale since Wednesday, May 25, 2011. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “goodsgood” and is located in Blaine, Washington. This item can be shipped worldwide.
- Energy Type: Wind
December
26
550 Watt 12V DC Wind Turbine Generator For GRID TIE INVERTER
Item is located in our USA / Canada warehouse. Canadian buyers are required to pay GST/HST. Everything in the picture are included. The Wind Generator is connected to the 3 Phase Rectifier, which changes the Alternative Current output by the generator to Direct Current (AC to DC). Electricity generated by the wind turbine are then stored to batteries. Note: the 12V Batteries above are not included. If your home or farm is connected to the power grid, on windier days you may be able to sell excess power generated by your wind turbine to your utility. This concept is called net metering. Even if net metering is unavailable, you might be able to reduce your power bills by using the electricity generated by wind turbines, and become less dependent on your utility. Power curve: Performance curve of power output versus wind speed. Since wind speed increases with height, increases to the tower height can mean enormous increases in the amount of electricity generated by a wind turbine. Tail is detachable for customization (ie: extension, enlarge, upgrade). 12V 550 Watt Wind Turbine Generator For GRID TIE INVERTER. 12cm (4.5 inches). Incorporates highly efficient, true airfoil – Quiet performance with minimal vibration – Manufactured using a precision injection molding process that produces blades of exceptional consistency. Reduce wind resistance – Eliminates vortexes – Greater stability – Neighbor Friendly. All pictures and descriptions are subjected to change without notice. We are not responsible for any inadvertent errors. Please refer to S&H price list above for details. Usually it will take 45 days for bounce backs to return to us. So, PLEASE make sure you address is correct. Items that are used/ damaged/ deformed or altered in any ways are not acceptable. The item “550 Watt 12V DC Wind Turbine Generator For GRID TIE INVERTER” is in sale since Sunday, October 24, 2010. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “goodsgood” and is located in Point Roberts, Washington. This item can be shipped worldwide.
- Energy Type: Wind