January 11

2500W Grid Tie Inverter 28V-48VDC/220VAC With MPPT Charger 24V(36VMP)Solar Panel

2500W Grid Tie Inverter 28V-48VDC/220VAC With MPPT Charger 24V(36VMP)Solar Panel
2500W Grid Tie Inverter 28V-48VDC/220VAC With MPPT Charger 24V(36VMP)Solar Panel
2500W Grid Tie Inverter 28V-48VDC/220VAC With MPPT Charger 24V(36VMP)Solar Panel

2500W Grid Tie Inverter 28V-48VDC/220VAC With MPPT Charger 24V(36VMP)Solar Panel
2015 Version With Solar Panel MPPT Function. 2500 Watt Pure Sine Wave Grid Tie Power Inverter. 50Hz & 60Hz Frequency. Charger For 24V(36V VMP) Solar Panel. Advantage For Grid Tie Power Inverter. Grid tie inverter is designed for small solar panel energy market, it’s suitable for family enengy system. 14V-24V grid tie inverter suitable for 12v solar panel which rated volt Vmp is about 18V. 28V-48V grid tie inverter suitable for 24v solar panel which rated volt Vmp is about 36V. 52V-88V grid tie inverter suitable for 48v solar panel which rated volt Vmp is about 72V. 102V-158V grid tie inverter suitable for 96v solar panel which rated volt Vmp is about 144V. Do not suitable for wind turbine, pls do not connect wind turbine for the DC source. This inverter can directly use solar panel through inverter to home grid. Easy to installation, just need solar panel, grid tie inverter, then directly can put into home grid. This inverter only has grid tie inverter function, do not have tranditional inverter function, pls do not connect the battery for dc source, for further questions, pls leave message to ask, tks. The inverter are designed for solar panels energy directly , no need battery! For battery, 24v for dc 14-24v inverter ; 36v for dc 28-48v inverter ;72v for dc 52-88v inverter ; 144v for dc 102-158v inverter ;But please do NOT hook these the inverter to battery banks for a long time , it will burn the inverter up over a period of time. If you want to connect with wind turbine , need connect with a dump load controller 12v for dc 14-24v inverter ; 24v for dc 28-48v inverter ; 36v for dc 52-88v inverter ; 72v for dc 102-158v inverter. This kind micro grid tie inverter, at the beginning its output will go up, but when the inverter inside is hot and temperature is too high, the fan will work, the inverter’s output will reduce or stop work for some seconds, after the inverter become cool, it will auto work again, and its output will go up. Separate the position of Red and Black terminal, would not cause short circuit easy. There are one big ball type fan. Speed is equal to CPU’s 2 times. Life time is CPU’s 5 times. Old version is SMT parts, easy drop. 2015 version is DIP, not easy drop and with long life time. 2015 version have 2 group capacity , total 12 pcs , low impedance. Filter is more effective, heating temperature is lower 15 degree than old version. Old version adopts current and voltage control IC, instability. Microchip from USA, it is very. Reaction speed is 10 times faster, 100 times high precision. Double protect for AC when over voltage, island reaction, and voltage spike. It will protect the inverter quickly when city power instability. Old version: turn off the switch, the vestigial current and voltage in DC side may damage the ac mosfets. 2015 new version: when turn off the switch, it will turn off both Ac and Dc side, cut off IC signal, would not damage the mosfet. When input power have 600w , the efficiency can reach to 90% , fan would not work , high efficiency will lead inside not to fever, can save solar power; when input power reach 1200w , the efficiency will keep on 87.5%. 2015 new version only have 1 bi-color light. Low voltage: red light flash, inverter no work. High voltage: green light always on, inverter no work. Normal work situation: green light flash, higher watt flash faster. For this design you are very clear to know where is the problem if the inverter not work, very easy to know if from your solar panel or inverter. Sometimes, if you are using some heavy appliance like motor, enginee, cause the voltage up down very fast, in this moment, big amp will come into the grid tie inverter, easy to cause the ac mos burned, so surge protector will cut down by itself to protect the grid tie inverter. You may have experience, when meet the big lightning, the power source of the home appliance may damage, same reason, will also cause the inverter damage, in this moment, the lightining protection can release thousand voltage to protect the inverter not damage. High speed AC fuse. We now provide access to the ac fuse from the outside of the inverter. Each inverter will come our special ac fuse. This will protect the inverter in less than a millisecond to help prevent high voltage. Spikes from feeding back into the circuitry! Operating Principle For Grid Tie Power Inverter? When you use solar panel through grid tie inverter, your home power meter will reduce the speed(if you are using other electric appliances), or your home power meter will backward(if you are not use any appliances). The inverter can be connected to any outlet at home, when this line run by the conventional electric network. The inverter IC will monitors the volume, frequency and phase of the home grid, then produce a pure sine wave that the frequency and phase will be match the grid’s, and the volume will be higher than the grid’s, then according to our current controlled PWM, to control the output power to the grid. The inverter will puts out power when the home grid is on. Traditional grid tie inverter is the solar panel are connect in series, so if one solar panel did not work or bad efficiency, then the whole system will be effects, but power jack grid tie inverter, you can use every inverter in parallel, in this moment, each inverter has it’s own MPPT, can make every solar panel got the max power. Our grid tie inverter has 1 green light, when the charge fucntion is normal, then this green light will turn on, but if there are not dc sources(like in the night, no sun shine or raining day), the red led light will turn on, the inverter will stop to work, in this moment, the inverter will close the door, the home grid power will not back to inverter. When you set up the grid tie inverter. Pls put the AC plug first. After plug into the home ac source. Dont remove the plug anymore. Otherwise it may have hight voltage spikes. Then connect the DC input. When you want remove the grid tie inverter. Please take away the DC input first. Then you can remove the AC plug. Accessary: will including the AC power cord, DC cable will not including! Fast, Reliably and Directly!! Website for ref is. International Buyers Please Note. If you are satisfied with our product and service, pls kindly leave full stars good feedback for us. The item “2500W Grid Tie Inverter 28V-48VDC/220VAC With MPPT Charger 24V(36VMP)Solar Panel” is in sale since Monday, April 20, 2015. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “powerinverter2010″ and is located in USA. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, ZA, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, BR, CL, CO, CR, PA, TT, GT, HN, JM.
  • Brand: Unbranded/Generic
  • MPN: Does Not Apply
  • UPC: Does Not Apply

2500W Grid Tie Inverter 28V-48VDC/220VAC With MPPT Charger 24V(36VMP)Solar Panel
Category: 2500w | Comments Off
September 12

2500W Grid Tie Inverter 28-48V DC/110V AC With MPPT Charger For 24V Solar Panel

2500W Grid Tie Inverter 28-48V DC/110V AC With MPPT Charger For 24V Solar Panel
2500W Grid Tie Inverter 28-48V DC/110V AC With MPPT Charger For 24V Solar Panel
2500W Grid Tie Inverter 28-48V DC/110V AC With MPPT Charger For 24V Solar Panel
2500W Grid Tie Inverter 28-48V DC/110V AC With MPPT Charger For 24V Solar Panel
2500W Grid Tie Inverter 28-48V DC/110V AC With MPPT Charger For 24V Solar Panel
2500W Grid Tie Inverter 28-48V DC/110V AC With MPPT Charger For 24V Solar Panel

2500W Grid Tie Inverter 28-48V DC/110V AC With MPPT Charger For 24V Solar Panel
2015 Version With MPPT Function. 2500 Watt Pure Sine Wave Grid Tie Power Inverter. 28V-48V DC Input 95V-130V AC Output 60Hz Frequency. Charger For 24V(36V VMP) Solar Panel. Advantage For Grid Tie Power Inverter. Grid tie inverter is designed for small solar panel energy market, it’s suitable for family enengy system. 14V-24V grid tie inverter suitable for 12v solar panel which rated volt Vmp is about 18V. 28V-48V grid tie inverter suitable for 24v solar panel which rated volt Vmp is about 36V. 52V-88V grid tie inverter suitable for 48v solar panel which rated volt Vmp is about 72V. 102V-158V grid tie inverter suitable for 96v solar panel which rated volt Vmp is about 144V. Do not suitable for wind turbine, pls do not connect wind turbine for the DC source. This inverter can directly use solar panel through inverter to home grid. Easy to installation, just need solar panel, grid tie inverter, then directly can put into home grid. This inverter only has grid tie inverter function, do not have tranditional inverter function, pls do not connect the battery for dc source, for further questions, pls leave message to ask, tks. The inverter are designed for solar panels energy directly , no need battery! For battery, 24v for dc 14-24v inverter ; 36v for dc 28-48v inverter ;72v for dc 52-88v inverter ; 144v for dc 102-158v inverter ;But please do NOT hook these the inverter to battery banks for a long time , it will burn the inverter up over a period of time. If you want to connect with wind turbine , need connect with a dump load controller 12v for dc 14-24v inverter ; 24v for dc 28-48v inverter ; 36v for dc 52-88v inverter ; 72v for dc 102-158v inverter. This kind micro grid tie inverter, at the beginning its output will go up, but when the inverter inside is hot and temperature is too high, the fan will work, the inverter’s output will reduce or stop work for some seconds, after the inverter become cool, it will auto work again, and its output will go up. Separate the position of Red and Black terminal, would not cause short circuit easy. There are one big ball type fan. Speed is equal to CPU’s 2 times. Life time is CPU’s 5 times. Old version is SMT parts, easy drop. 2015 version is DIP, not easy drop and with long life time. 2015 version have 2 group capacity , total 12 pcs , low impedance. Filter is more effective, heating temperature is lower 15 degree than old version. Old version adopts current and voltage control IC, instability. Microchip from USA, it is very. Reaction speed is 10 times faster, 100 times high precision. Double protect for AC when over voltage, island reaction, and voltage spike. It will protect the inverter quickly when city power instability. Old version: turn off the switch, the vestigial current and voltage in DC side may damage the ac mosfets. 2015 new version: when turn off the switch, it will turn off both Ac and Dc side, cut off IC signal, would not damage the mosfet. When input power have 600w , the efficiency can reach to 90% , fan would not work , high efficiency will lead inside not to fever, can save solar power; when input power reach 1200w , the efficiency will keep on 87.5%. 2015 new version only have 1 bi-color light. Low voltage: red light flash, inverter no work. High voltage: green light always on, inverter no work. Normal work situation: green light flash, higher watt flash faster. For this design you are very clear to know where is the problem if the inverter not work, very easy to know if from your solar panel or inverter. Sometimes, if you are using some heavy appliance like motor, enginee, cause the voltage up down very fast, in this moment, big amp will come into the grid tie inverter, easy to cause the ac mos burned, so surge protector will cut down by itself to protect the grid tie inverter. You may have experience, when meet the big lightning, the power source of the home appliance may damage, same reason, will also cause the inverter damage, in this moment, the lightining protection can release thousand voltage to protect the inverter not damage. High speed AC fuse. We now provide access to the ac fuse from the outside of the inverter. Each inverter will come our special ac fuse. This will protect the inverter in less than a millisecond to help prevent high voltage. Spikes from feeding back into the circuitry! Operating Principle For Grid Tie Power Inverter? When you use solar panel through grid tie inverter, your home power meter will reduce the speed(if you are using other electric appliances), or your home power meter will backward(if you are not use any appliances). The inverter can be connected to any outlet at home, when this line run by the conventional electric network. The inverter IC will monitors the volume, frequency and phase of the home grid, then produce a pure sine wave that the frequency and phase will be match the grid’s, and the volume will be higher than the grid’s, then according to our current controlled PWM, to control the output power to the grid. The inverter will puts out power when the home grid is on. Traditional grid tie inverter is the solar panel are connect in series, so if one solar panel did not work or bad efficiency, then the whole system will be effects, but power jack grid tie inverter, you can use every inverter in parallel, in this moment, each inverter has it’s own MPPT, can make every solar panel got the max power. Our grid tie inverter has 1 green light, when the charge fucntion is normal, then this green light will turn on, but if there are not dc sources(like in the night, no sun shine or raining day), the red led light will turn on, the inverter will stop to work, in this moment, the inverter will close the door, the home grid power will not back to inverter. When you set up the grid tie inverter. Pls put the AC plug first. After plug into the home ac source. Dont remove the plug anymore. Otherwise it may have hight voltage spikes. Then connect the DC input. When you want remove the grid tie inverter. Please take away the DC input first. Then you can remove the AC plug. Accessary: will including the AC power cord, DC cable will not including! Specification: 2500w grid tie power inverter 28v-48v. DC to 110v (with mppt function). DC 28-48v (solar panel). 23-27v red light flash. 28-48v, green flash, more larger output more faster. Over 48v, green light on. Less 23v, no light on and no output. No Load current Draw. Dimensions (L x W x H /cm). Fast, Reliably and Directly!! International Buyers Please Note. If you are satisfied with our product and service, pls kindly leave full stars good feedback for us. The item “2500W Grid Tie Inverter 28-48V DC/110V AC With MPPT Charger For 24V Solar Panel” is in sale since Saturday, March 21, 2015. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “poweronlinesale2008″ and is located in USA. This item can be shipped to United States, to Canada.
  • Brand: Unbranded/Generic
  • MPN: Does Not Apply
  • UPC: Does Not Apply

2500W Grid Tie Inverter 28-48V DC/110V AC With MPPT Charger For 24V Solar Panel
Category: 2500w | Comments Off
September 3

1200W Grid Tie Inverter 102V-158VDC/220VAC With 3.5LCD&MPPT Charger Solar Panel

1200W Grid Tie Inverter 102V-158VDC/220VAC With 3.5LCD&MPPT Charger Solar Panel
1200W Grid Tie Inverter 102V-158VDC/220VAC With 3.5LCD&MPPT Charger Solar Panel
1200W Grid Tie Inverter 102V-158VDC/220VAC With 3.5LCD&MPPT Charger Solar Panel
1200W Grid Tie Inverter 102V-158VDC/220VAC With 3.5LCD&MPPT Charger Solar Panel
1200W Grid Tie Inverter 102V-158VDC/220VAC With 3.5LCD&MPPT Charger Solar Panel
1200W Grid Tie Inverter 102V-158VDC/220VAC With 3.5LCD&MPPT Charger Solar Panel
1200W Grid Tie Inverter 102V-158VDC/220VAC With 3.5LCD&MPPT Charger Solar Panel
1200W Grid Tie Inverter 102V-158VDC/220VAC With 3.5LCD&MPPT Charger Solar Panel

1200W Grid Tie Inverter 102V-158VDC/220VAC With 3.5LCD&MPPT Charger Solar Panel
2015 Version With 3.5 LCD Meter & Solar Panel MPPT Function. 1200 Watt Pure Sine Wave Grid Tie Power Inverter. 50Hz & 60Hz Frequency. With LCD Meter Charger For 96V(144V VMP) Solar Panel. Difference Between Grid Tie Inverter And Grid Tie Inverter With LCD Meter(2015 version). The LCD meter’s watts is 10000w, it can measure your whole appliance, long time to use and hard to damage. Cooling area is larger 30% than old version, tempreture and fan protection hard to run, can save the power of solar panel, so inverter can use best efficieny. It will bring your life covenient, take you to a green world and enjoy freely! Inverter has mppt function, LED light has different display when inverter is low voltage, working voltage, high voltage. User can know the power states of solar panel through LCD meter as watts, voltage, amps and so on, it’s really a smart inverter. AC Output watt :0 Watt (Max display power 15KWcan display running power less than 1W). AC Output Volt : 0 volt (Max display volt 270V). AC Output Amp : 0 Amp (Max display amp 55A). Total Operation time :0-60000 hoursOperation time: 059 minutes to 24 hours to 2500 days. Electricity consumption: 01000000 kwh. Total operation time , electricity consumption and electricity cost can clear. Can set up power , the meter will alarm when reach reserve power. Can set up the cost. Refresh rate: one time 0.5 seconds. Advantage For Grid Tie Power Inverter. Grid tie inverter is designed for small solar panel energy market, it’s suitable for family enengy system. 14V-24V grid tie inverter suitable for 12v solar panel which rated volt Vmp is about 18V. 28V-48V grid tie inverter suitable for 24v solar panel which rated volt Vmp is about 36V. 52V-88V grid tie inverter suitable for 48v solar panel which rated volt Vmp is about 72V. 102V-158V grid tie inverter suitable for 96v solar panel which rated volt Vmp is about 144V. Do not suitable for wind turbine, pls do not connect wind turbine for the DC source. This inverter can directly use solar panel through inverter to home grid. Easy to installation, just need solar panel, grid tie inverter, then directly can put into home grid. This inverter only has grid tie inverter function, do not have tranditional inverter function, pls do not connect the battery for dc source, for further questions, pls leave message to ask, tks. The inverter are designed for solar panels energy directly , no need battery! For battery, 24v for dc 14-24v inverter ; 36v for dc 28-48v inverter ;72v for dc 52-88v inverter ; 144v for dc 102-158v inverter ;But please do NOT hook these the inverter to battery banks for a long time , it will burn the inverter up over a period of time. If you want to connect with wind turbine , need connect with a dump load controller 12v for dc 14-24v inverter ; 24v for dc 28-48v inverter ; 36v for dc 52-88v inverter ; 72v for dc 102-158v inverter. This kind micro grid tie inverter, at the beginning its output will go up, but when the inverter inside is hot and temperature is too high, the fan will work, the inverter’s output will reduce or stop work for some seconds, after the inverter become cool, it will auto work again, and its output will go up. Separate the position of Red and Black terminal, would not cause short circuit easy. There are one big ball type fan. Speed is equal to CPU’s 2 times. Life time is CPU’s 5 times. Old version is SMT parts, easy drop. 2015 version is DIP, not easy drop and with long life time. 2015 version have 2 group capacity , total 12 pcs , low impedance. Filter is more effective, heating temperature is lower 15 degree than old version. Old version adopts current and voltage control IC, instability. Microchip from USA, it is very. Reaction speed is 10 times faster, 100 times high precision. Double protect for AC when over voltage, island reaction, and voltage spike. It will protect the inverter quickly when city power instability. Old version: turn off the switch, the vestigial current and voltage in DC side may damage the ac mosfets. 2015 new version: when turn off the switch, it will turn off both Ac and Dc side, cut off IC signal, would not damage the mosfet. When input power have 600w , the efficiency can reach to 90% , fan would not work , high efficiency will lead inside not to fever, can save solar power; when input power reach 1200w , the efficiency will keep on 87.5%. 2015 new version only have 1 bi-color light. Low voltage: red light flash, inverter no work. High voltage: green light always on, inverter no work. Normal work situation: green light flash, higher watt flash faster. For this design you are very clear to know where is the problem if the inverter not work, very easy to know if from your solar panel or inverter. Sometimes, if you are using some heavy appliance like motor, enginee, cause the voltage up down very fast, in this moment, big amp will come into the grid tie inverter, easy to cause the ac mos burned, so surge protector will cut down by itself to protect the grid tie inverter. You may have experience, when meet the big lightning, the power source of the home appliance may damage, same reason, will also cause the inverter damage, in this moment, the lightining protection can release thousand voltage to protect the inverter not damage. High speed AC fuse. We now provide access to the ac fuse from the outside of the inverter. Each inverter will come our special ac fuse. This will protect the inverter in less than a millisecond to help prevent high voltage. Spikes from feeding back into the circuitry! Operating Principle For Grid Tie Power Inverter? When you use solar panel through grid tie inverter, your home power meter will reduce the speed(if you are using other electric appliances), or your home power meter will backward(if you are not use any appliances). The inverter can be connected to any outlet at home, when this line run by the conventional electric network. The inverter IC will monitors the volume, frequency and phase of the home grid, then produce a pure sine wave that the frequency and phase will be match the grid’s, and the volume will be higher than the grid’s, then according to our current controlled PWM, to control the output power to the grid. The inverter will puts out power when the home grid is on. Traditional grid tie inverter is the solar panel are connect in series, so if one solar panel did not work or bad efficiency, then the whole system will be effects, but power jack grid tie inverter, you can use every inverter in parallel, in this moment, each inverter has it’s own MPPT, can make every solar panel got the max power. Our grid tie inverter has 1 green light, when the charge fucntion is normal, then this green light will turn on, but if there are not dc sources(like in the night, no sun shine or raining day), the red led light will turn on, the inverter will stop to work, in this moment, the inverter will close the door, the home grid power will not back to inverter. When you set up the grid tie inverter. Pls put the AC plug first. After plug into the home ac source. Dont remove the plug anymore. Otherwise it may have hight voltage spikes. Then connect the DC input. When you want remove the grid tie inverter. Please take away the DC input first. Then you can remove the AC plug. Accessary: will including the AC power cord, DC cable will not including! Fast, Reliably and Directly!! Website for ref is. International Buyers Please Note. If you are satisfied with our product and service, pls kindly leave full stars good feedback for us. The item “1200W Grid Tie Inverter 102V-158VDC/220VAC With 3.5LCD&MPPT Charger Solar Panel” is in sale since Sunday, June 05, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “powerinverter2010″ and is located in USA. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, ZA, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, PH, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, BR, CL, CO, CR, PA, TT, GT, HN, JM.
  • Brand: Unbranded/Generic
  • MPN: Does Not Apply
  • UPC: Does Not Apply

1200W Grid Tie Inverter 102V-158VDC/220VAC With 3.5LCD&MPPT Charger Solar Panel
Category: 1200w | Comments Off
July 16

1200W Grid Tie Inverter 102V-158VDC/110VAC With 3.5LCD&MPPT Charger Solar Panel

1200W Grid Tie Inverter 102V-158VDC/110VAC With 3.5LCD&MPPT Charger Solar Panel
1200W Grid Tie Inverter 102V-158VDC/110VAC With 3.5LCD&MPPT Charger Solar Panel
1200W Grid Tie Inverter 102V-158VDC/110VAC With 3.5LCD&MPPT Charger Solar Panel
1200W Grid Tie Inverter 102V-158VDC/110VAC With 3.5LCD&MPPT Charger Solar Panel
1200W Grid Tie Inverter 102V-158VDC/110VAC With 3.5LCD&MPPT Charger Solar Panel
1200W Grid Tie Inverter 102V-158VDC/110VAC With 3.5LCD&MPPT Charger Solar Panel
1200W Grid Tie Inverter 102V-158VDC/110VAC With 3.5LCD&MPPT Charger Solar Panel
1200W Grid Tie Inverter 102V-158VDC/110VAC With 3.5LCD&MPPT Charger Solar Panel

1200W Grid Tie Inverter 102V-158VDC/110VAC With 3.5LCD&MPPT Charger Solar Panel
2015 Version With 3.5 LCD Meter & Solar Panel MPPT Function. 1200 Watt Pure Sine Wave Grid Tie Power Inverter. 102V-158V DC Input 95V-130V AC Output 60Hz Frequency. With LCD Meter Charger For 96V(144V VMP) Solar Panel. Difference Between Grid Tie Inverter And Grid Tie Inverter With LCD Meter(2015 version). The LCD meter’s watts is 10000w, it can measure your whole appliance, long time to use and hard to damage. Cooling area is larger 30% than old version, tempreture and fan protection hard to run, can save the power of solar panel, so inverter can use best efficieny. It will bring your life covenient, take you to a green world and enjoy freely! Inverter has mppt function, LED light has different display when inverter is low voltage, working voltage, high voltage. User can know the power states of solar panel through LCD meter as watts, voltage, amps and so on, it’s really a smart inverter. AC Output watt :0 Watt (Max display power 15KWcan display running power less than 1W). AC Output Volt : 0 volt (Max display volt 270V). AC Output Amp : 0 Amp (Max display amp 55A). Total Operation time :0-60000 hoursOperation time: 059 minutes to 24 hours to 2500 days. Electricity consumption: 01000000 kwh. Total operation time , electricity consumption and electricity cost can clear. Can set up power , the meter will alarm when reach reserve power. Can set up the cost. Refresh rate: one time 0.5 seconds. Advantage For Grid Tie Power Inverter. Grid tie inverter is designed for small solar panel energy market, it’s suitable for family enengy system. 14V-24V grid tie inverter suitable for 12v solar panel which rated volt Vmp is about 18V. 28V-48V grid tie inverter suitable for 24v solar panel which rated volt Vmp is about 36V. 52V-88V grid tie inverter suitable for 48v solar panel which rated volt Vmp is about 72V. 102V-158V grid tie inverter suitable for 96v solar panel which rated volt Vmp is about 144V. Do not suitable for wind turbine, pls do not connect wind turbine for the DC source. This inverter can directly use solar panel through inverter to home grid. Easy to installation, just need solar panel, grid tie inverter, then directly can put into home grid. This inverter only has grid tie inverter function, do not have tranditional inverter function, pls do not connect the battery for dc source, for further questions, pls leave message to ask, tks. The inverter are designed for solar panels energy directly , no need battery! For battery, 24v for dc 14-24v inverter ; 36v for dc 28-48v inverter ;72v for dc 52-88v inverter ; 144v for dc 102-158v inverter ;But please do NOT hook these the inverter to battery banks for a long time , it will burn the inverter up over a period of time. If you want to connect with wind turbine , need connect with a dump load controller 12v for dc 14-24v inverter ; 24v for dc 28-48v inverter ; 36v for dc 52-88v inverter ; 72v for dc 102-158v inverter. This kind micro grid tie inverter, at the beginning its output will go up, but when the inverter inside is hot and temperature is too high, the fan will work, the inverter’s output will reduce or stop work for some seconds, after the inverter become cool, it will auto work again, and its output will go up. Separate the position of Red and Black terminal, would not cause short circuit easy. There are one big ball type fan. Speed is equal to CPU’s 2 times. Life time is CPU’s 5 times. Old version is SMT parts, easy drop. 2015 version is DIP, not easy drop and with long life time. 2015 version have 2 group capacity , total 12 pcs , low impedance. Filter is more effective, heating temperature is lower 15 degree than old version. Old version adopts current and voltage control IC, instability. Microchip from USA, it is very. Reaction speed is 10 times faster, 100 times high precision. Double protect for AC when over voltage, island reaction, and voltage spike. It will protect the inverter quickly when city power instability. Old version: turn off the switch, the vestigial current and voltage in DC side may damage the ac mosfets. 2015 new version: when turn off the switch, it will turn off both Ac and Dc side, cut off IC signal, would not damage the mosfet. When input power have 600w , the efficiency can reach to 90% , fan would not work , high efficiency will lead inside not to fever, can save solar power; when input power reach 1200w , the efficiency will keep on 87.5%. 2015 new version only have 1 bi-color light. Low voltage: red light flash, inverter no work. High voltage: green light always on, inverter no work. Normal work situation: green light flash, higher watt flash faster. For this design you are very clear to know where is the problem if the inverter not work, very easy to know if from your solar panel or inverter. Sometimes, if you are using some heavy appliance like motor, enginee, cause the voltage up down very fast, in this moment, big amp will come into the grid tie inverter, easy to cause the ac mos burned, so surge protector will cut down by itself to protect the grid tie inverter. You may have experience, when meet the big lightning, the power source of the home appliance may damage, same reason, will also cause the inverter damage, in this moment, the lightining protection can release thousand voltage to protect the inverter not damage. High speed AC fuse. We now provide access to the ac fuse from the outside of the inverter. Each inverter will come our special ac fuse. This will protect the inverter in less than a millisecond to help prevent high voltage. Spikes from feeding back into the circuitry! Operating Principle For Grid Tie Power Inverter? When you use solar panel through grid tie inverter, your home power meter will reduce the speed(if you are using other electric appliances), or your home power meter will backward(if you are not use any appliances). The inverter can be connected to any outlet at home, when this line run by the conventional electric network. The inverter IC will monitors the volume, frequency and phase of the home grid, then produce a pure sine wave that the frequency and phase will be match the grid’s, and the volume will be higher than the grid’s, then according to our current controlled PWM, to control the output power to the grid. The inverter will puts out power when the home grid is on. Traditional grid tie inverter is the solar panel are connect in series, so if one solar panel did not work or bad efficiency, then the whole system will be effects, but power jack grid tie inverter, you can use every inverter in parallel, in this moment, each inverter has it’s own MPPT, can make every solar panel got the max power. Our grid tie inverter has 1 green light, when the charge fucntion is normal, then this green light will turn on, but if there are not dc sources(like in the night, no sun shine or raining day), the red led light will turn on, the inverter will stop to work, in this moment, the inverter will close the door, the home grid power will not back to inverter. When you set up the grid tie inverter. Pls put the AC plug first. After plug into the home ac source. Dont remove the plug anymore. Otherwise it may have hight voltage spikes. Then connect the DC input. When you want remove the grid tie inverter. Please take away the DC input first. Then you can remove the AC plug. Accessary: will including the AC power cord, DC cable will not including! Fast, Reliably and Directly!! Website for ref is. International Buyers Please Note. If you are satisfied with our product and service, pls kindly leave full stars good feedback for us. The item “1200W Grid Tie Inverter 102V-158VDC/110VAC With 3.5LCD&MPPT Charger Solar Panel” is in sale since Friday, April 10, 2015. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “powerinverter2010″ and is located in USA. This item can be shipped to United States, to Canada.
  • Brand: Unbranded/Generic
  • MPN: Does Not Apply
  • UPC: Does Not Apply

1200W Grid Tie Inverter 102V-158VDC/110VAC With 3.5LCD&MPPT Charger Solar Panel
Category: 1200w | Comments Off
May 29

2500W Grid Tie Inverter 28V-48V DC/220V AC With MPPT Charger For 24V Solar Panel

2500W Grid Tie Inverter 28V-48V DC/220V AC With MPPT Charger For 24V Solar Panel
2500W Grid Tie Inverter 28V-48V DC/220V AC With MPPT Charger For 24V Solar Panel
2500W Grid Tie Inverter 28V-48V DC/220V AC With MPPT Charger For 24V Solar Panel
2500W Grid Tie Inverter 28V-48V DC/220V AC With MPPT Charger For 24V Solar Panel
2500W Grid Tie Inverter 28V-48V DC/220V AC With MPPT Charger For 24V Solar Panel
2500W Grid Tie Inverter 28V-48V DC/220V AC With MPPT Charger For 24V Solar Panel

2500W Grid Tie Inverter 28V-48V DC/220V AC With MPPT Charger For 24V Solar Panel
2015 Version With MPPT Function. 2500 Watt Pure Sine Wave Grid Tie Power Inverter. 195V-260V AC Output 50Hz & 60Hz Frequency. Charger For 24V(36V VMP) Solar Panel. Advantage For Grid Tie Power Inverter. Grid tie inverter is designed for small solar panel energy market, it’s suitable for family enengy system. 14V-24V grid tie inverter suitable for 12v solar panel which rated volt Vmp is about 18V. 28V-48V grid tie inverter suitable for 24v solar panel which rated volt Vmp is about 36V. 52V-88V grid tie inverter suitable for 48v solar panel which rated volt Vmp is about 72V. 102V-158V grid tie inverter suitable for 96v solar panel which rated volt Vmp is about 144V. Do not suitable for wind turbine, pls do not connect wind turbine for the DC source. This inverter can directly use solar panel through inverter to home grid. Easy to installation, just need solar panel, grid tie inverter, then directly can put into home grid. This inverter only has grid tie inverter function, do not have tranditional inverter function, pls do not connect the battery for dc source, for further questions, pls leave message to ask, tks. The inverter are designed for solar panels energy directly , no need battery! For battery, 24v for dc 14-24v inverter ; 36v for dc 28-48v inverter ;72v for dc 52-88v inverter ; 144v for dc 102-158v inverter ;But please do NOT hook these the inverter to battery banks for a long time , it will burn the inverter up over a period of time. If you want to connect with wind turbine , need connect with a dump load controller 12v for dc 14-24v inverter ; 24v for dc 28-48v inverter ; 36v for dc 52-88v inverter ; 72v for dc 102-158v inverter. This kind micro grid tie inverter, at the beginning its output will go up, but when the inverter inside is hot and temperature is too high, the fan will work, the inverter’s output will reduce or stop work for some seconds, after the inverter become cool, it will auto work again, and its output will go up. Separate the position of Red and Black terminal, would not cause short circuit easy. There are one big ball type fan. Speed is equal to CPU’s 2 times. Life time is CPU’s 5 times. Old version is SMT parts, easy drop. 2015 version is DIP, not easy drop and with long life time. 2015 version have 2 group capacity , total 12 pcs , low impedance. Filter is more effective, heating temperature is lower 15 degree than old version. Old version adopts current and voltage control IC, instability. Microchip from USA, it is very. Reaction speed is 10 times faster, 100 times high precision. Double protect for AC when over voltage, island reaction, and voltage spike. It will protect the inverter quickly when city power instability. Old version: turn off the switch, the vestigial current and voltage in DC side may damage the ac mosfets. 2015 new version: when turn off the switch, it will turn off both Ac and Dc side, cut off IC signal, would not damage the mosfet. When input power have 600w , the efficiency can reach to 90% , fan would not work , high efficiency will lead inside not to fever, can save solar power; when input power reach 1200w , the efficiency will keep on 87.5%. 2015 new version only have 1 bi-color light. Low voltage: red light flash, inverter no work. High voltage: green light always on, inverter no work. Normal work situation: green light flash, higher watt flash faster. For this design you are very clear to know where is the problem if the inverter not work, very easy to know if from your solar panel or inverter. Sometimes, if you are using some heavy appliance like motor, enginee, cause the voltage up down very fast, in this moment, big amp will come into the grid tie inverter, easy to cause the ac mos burned, so surge protector will cut down by itself to protect the grid tie inverter. You may have experience, when meet the big lightning, the power source of the home appliance may damage, same reason, will also cause the inverter damage, in this moment, the lightining protection can release thousand voltage to protect the inverter not damage. High speed AC fuse. We now provide access to the ac fuse from the outside of the inverter. Each inverter will come our special ac fuse. This will protect the inverter in less than a millisecond to help prevent high voltage. Spikes from feeding back into the circuitry! Operating Principle For Grid Tie Power Inverter? When you use solar panel through grid tie inverter, your home power meter will reduce the speed(if you are using other electric appliances), or your home power meter will backward(if you are not use any appliances). The inverter can be connected to any outlet at home, when this line run by the conventional electric network. The inverter IC will monitors the volume, frequency and phase of the home grid, then produce a pure sine wave that the frequency and phase will be match the grid’s, and the volume will be higher than the grid’s, then according to our current controlled PWM, to control the output power to the grid. The inverter will puts out power when the home grid is on. Traditional grid tie inverter is the solar panel are connect in series, so if one solar panel did not work or bad efficiency, then the whole system will be effects, but power jack grid tie inverter, you can use every inverter in parallel, in this moment, each inverter has it’s own MPPT, can make every solar panel got the max power. Our grid tie inverter has 1 green light, when the charge fucntion is normal, then this green light will turn on, but if there are not dc sources(like in the night, no sun shine or raining day), the red led light will turn on, the inverter will stop to work, in this moment, the inverter will close the door, the home grid power will not back to inverter. When you set up the grid tie inverter. Pls put the AC plug first. After plug into the home ac source. Dont remove the plug anymore. Otherwise it may have hight voltage spikes. Then connect the DC input. When you want remove the grid tie inverter. Please take away the DC input first. Then you can remove the AC plug. Accessary: will including the AC power cord, DC cable will not including! Specification: 2500w grid tie power inverter 28v-48v. DC to 110v (with mppt function). DC 28-48v (solar panel). 23-27v red light flash. 28-48v, green flash, more larger output more faster. Over 48v, green light on. Less 23v, no light on and no output. No Load current Draw. Dimensions (L x W x H /cm). Fast, Reliably and Directly!! International Buyers Please Note. If you are satisfied with our product and service, pls kindly leave full stars good feedback for us. The item “2500W Grid Tie Inverter 28V-48V DC/220V AC With MPPT Charger For 24V Solar Panel” is in sale since Sunday, April 19, 2015. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “poweronlinesale2008″ and is located in USA. This item can be shipped to United States, to Canada.
  • Brand: Unbranded/Generic
  • MPN: Does Not Apply
  • UPC: Does Not Apply

2500W Grid Tie Inverter 28V-48V DC/220V AC With MPPT Charger For 24V Solar Panel
Category: 2500w | Comments Off
May 11

Magnum MS4024PAE Inverter charger 120/240 grid tie all the whistles and bells

Magnum MS4024PAE Inverter charger 120/240 grid tie all the whistles and bells
Magnum MS4024PAE Inverter charger 120/240 grid tie all the whistles and bells
Magnum MS4024PAE Inverter charger 120/240 grid tie all the whistles and bells

Magnum MS4024PAE Inverter charger 120/240 grid tie all the whistles and bells
Magnum MS4024PAE Inverter/Charger Complete Kit. 1 Magnum ME-RC50 Digital LCD Display Remote Panel with 50′ Cable. 1 Magnum Battery Temperature Sensor. 1 Magnum MS4024PAE Inverter/Charger, 4000W, 24VDC, Pure Sine Wave. 1 Magnum MMP250-30D Mini Panel (pre-wired) with 250Amp main breaker and two 30Amp breakers. 1 Magnum BP-MMP Back Plate (for easy mounting on a wall while being code approved). The MS-PAE Series Inverter/Charger includes the following. High wattage output in a small footprint – less weight and area needed for install. Ability to parallel up to four identical MS-PAE inverters to increase output power capability (requires ME-RTR). Large AC access and terminal block [wire size: #18 to #2 AWG (0.82 to 33.6 mm2) CU]. DC terminal covers with 360 degree connection. Pure sine wave output (<5% THD). 120/240 VAC Split phase output in a single inverter. PFC (Power Factor Corrected) multi-stage battery charger. RS485 standard communication protocol. Remote and Network ports (easy connection for optional accessories). ON/OFF Inverter-mounted switch with LED indicator. Battery Temperature Sensor - for optimum charging during extreme temperature changes. Field Serviceable for qualifi ed personnel - tested repair kits available. Smooth, aesthetically pleasing design. MS4024PAE and MS4448PAE are ETL listed to UL/cUL STD 1741 and CSA STD 22.2 107.01-01 for safety. The MS-PAE Series Inverter/Charger from Magnum Energy is a pure sine wave inverter designed specifically for the most demanding renewable energy applications. When the power requirements of the system are beyond the capacity of a single MS-PAE Series inverter or the system is expanded as more loads are added, up to four MS-PAE Series inverters can be connected together in a parallel configuration. When connecting inverters in parallel, the overall inverter power and surge capacity is increased to power a large single load or more smaller loads. Available in 4000 (24 volts) watt models, the MS-PAE Series inverters are powerful, easy-to-use and ETL listed to the stringent requirements of UL 1741 and CSA C22.2 No. 107.1-01 for Renewable Energy installations. Pure Sine Wave: Power your T. S, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%. Choices: The MS-PAE Series comes in 24 volt configurations, allowing you to choose the model that is right for you. Versatile Mounting: Mount the MS-PAE Series on a shelf or wall. Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance. Multiple Ports: The MS-PAE Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port. The extra large AC access cover with terminal screw block and 360°DC connection terminals with covers make this inverter more accessible when it needs to be. The MS-PAE Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator. MMP250-30D Mini Panel The MMP (Mini Magnum Panel) has been specifically designed to combine all of the major components required for a renewable energy system inverter/battery disconnect, AC overcurrent protection, grounding connections, and a full system inverter bypass switch as a convenient way to isolate the inverter for battery maintenance into a single, easy to install pre-wired enclosure. Designed for single inverter applications, the MMP enclosure features convenient front panel operation, and with the optional front panel remote, allows you to easily set up, monitor, and operate your Magnum inverter system. BP-MMP The BP-MMP is a single-piece, powder-coated steel back plate designed to accommodate the MMP enclosure, a Magnum inverter, and the inverter hood together; making the complete system appear more seamless. Designed with PEM i. The BP-MMP back plate is also used to provide the necessary requirement to provide a noncombustible mounting surface required when mounting the inverter on a wall. ME-RC50 The ME-RC Remote Control communicates with the inverter to easily operate and monitor your inverter and charger from a remote location. This Remote Control has an easy-to-read LCD screen and displays the inverter/charger status with the at a glance LEDs. Soft keys provide simple access to menus and a rotary encoder knob allows you to scroll through and easily configure the adjustable settings in the inverter (or any connected accessory) and maintain the critical settings in nonvolatile memory. The ME-RC also has the option of controlling the ME-AGS Automatic Gen Start and the ME-BMK Battery Monitor Kit (requires revision 2.0 or higher remote) using a network connection to the inverter. This remote has convenient finger-tip operation, including the new one-knob programming. MP-HOOD The MP-HOOD a single-piece, powder-coated steel cover plate. It is designed to allow a Magnum inverter to be mounted vertically and prevent items from falling into the ventilation openings in the top of the inverter. Inside our store, Missouri Wind and Solar. A REAL STORE WITH REAL PEOPLE. YOU CAN ACTUALLY COME IN AND TRY OUR PRODUCTS AND SEE THEM WORKING. Products may be slightly different than the ones pictured. If our supplier runs short of the products shown, we will substitute them for the same quality or better. The item "Magnum MS4024PAE Inverter charger 120/240 grid tie all the whistles and bells" is in sale since Friday, June 12, 2015. This item is in the category "Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters". The seller is "missouriwind" and is located in Seymour, Missouri. This item can be shipped to United States.
  • Brand: Magnum
  • Model: MS4024PAE Inverter charger 120/240 grid tie
  • MPN: MS4024PAE Inverter charger 120/240 grid tie
  • Country/Region of Manufacture: United States

Magnum MS4024PAE Inverter charger 120/240 grid tie all the whistles and bells
Category: magnum | Comments Off
February 20

1200W Grid Tie Inverter 28V-48VDC/110VAC With 3.5LCD & MPPT Charger Solar Panel

1200W Grid Tie Inverter 28V-48VDC/110VAC With 3.5LCD & MPPT Charger Solar Panel
1200W Grid Tie Inverter 28V-48VDC/110VAC With 3.5LCD & MPPT Charger Solar Panel
1200W Grid Tie Inverter 28V-48VDC/110VAC With 3.5LCD & MPPT Charger Solar Panel
1200W Grid Tie Inverter 28V-48VDC/110VAC With 3.5LCD & MPPT Charger Solar Panel
1200W Grid Tie Inverter 28V-48VDC/110VAC With 3.5LCD & MPPT Charger Solar Panel
1200W Grid Tie Inverter 28V-48VDC/110VAC With 3.5LCD & MPPT Charger Solar Panel
1200W Grid Tie Inverter 28V-48VDC/110VAC With 3.5LCD & MPPT Charger Solar Panel
1200W Grid Tie Inverter 28V-48VDC/110VAC With 3.5LCD & MPPT Charger Solar Panel

1200W Grid Tie Inverter 28V-48VDC/110VAC With 3.5LCD & MPPT Charger Solar Panel
2015 Version With 3.5 LCD Meter & Solar Panel MPPT Function. 1200 Watt Pure Sine Wave Grid Tie Power Inverter. 28V-48V DC Input 95V-130V AC Output 60Hz Frequency. With LCD Meter Charger For 24V(36V VMP) Solar Panel. Difference Between Grid Tie Inverter And Grid Tie Inverter With LCD Meter(2015 version). The LCD meter’s watts is 10000w, it can measure your whole appliance, long time to use and hard to damage. Cooling area is larger 30% than old version, tempreture and fan protection hard to run, can save the power of solar panel, so inverter can use best efficieny. It will bring your life covenient, take you to a green world and enjoy freely! Inverter has mppt function, LED light has different display when inverter is low voltage, working voltage, high voltage. User can know the power states of solar panel through LCD meter as watts, voltage, amps and so on, it’s really a smart inverter. AC Output watt :0 Watt (Max display power 15KWcan display running power less than 1W). AC Output Volt : 0 volt (Max display volt 270V). AC Output Amp : 0 Amp (Max display amp 55A). Total Operation time :0-60000 hoursOperation time: 059 minutes to 24 hours to 2500 days. Electricity consumption: 01000000 kwh. Total operation time , electricity consumption and electricity cost can clear. Can set up power , the meter will alarm when reach reserve power. Can set up the cost. Refresh rate: one time 0.5 seconds. Advantage For Grid Tie Power Inverter. Grid tie inverter is designed for small solar panel energy market, it’s suitable for family enengy system. 14V-24V grid tie inverter suitable for 12v solar panel which rated volt Vmp is about 18V. 28V-48V grid tie inverter suitable for 24v solar panel which rated volt Vmp is about 36V. 52V-88V grid tie inverter suitable for 48v solar panel which rated volt Vmp is about 72V. 102V-158V grid tie inverter suitable for 96v solar panel which rated volt Vmp is about 144V. Do not suitable for wind turbine, pls do not connect wind turbine for the DC source. This inverter can directly use solar panel through inverter to home grid. Easy to installation, just need solar panel, grid tie inverter, then directly can put into home grid. This inverter only has grid tie inverter function, do not have tranditional inverter function, pls do not connect the battery for dc source, for further questions, pls leave message to ask, tks. The inverter are designed for solar panels energy directly , no need battery! For battery, 24v for dc 14-24v inverter ; 36v for dc 28-48v inverter ;72v for dc 52-88v inverter ; 144v for dc 102-158v inverter ;But please do NOT hook these the inverter to battery banks for a long time , it will burn the inverter up over a period of time. If you want to connect with wind turbine , need connect with a dump load controller 12v for dc 14-24v inverter ; 24v for dc 28-48v inverter ; 36v for dc 52-88v inverter ; 72v for dc 102-158v inverter. This kind micro grid tie inverter, at the beginning its output will go up, but when the inverter inside is hot and temperature is too high, the fan will work, the inverter’s output will reduce or stop work for some seconds, after the inverter become cool, it will auto work again, and its output will go up. Separate the position of Red and Black terminal, would not cause short circuit easy. There are one big ball type fan. Speed is equal to CPU’s 2 times. Life time is CPU’s 5 times. Old version is SMT parts, easy drop. 2015 version is DIP, not easy drop and with long life time. 2015 version have 2 group capacity , total 12 pcs , low impedance. Filter is more effective, heating temperature is lower 15 degree than old version. Old version adopts current and voltage control IC, instability. Microchip from USA, it is very. Reaction speed is 10 times faster, 100 times high precision. Double protect for AC when over voltage, island reaction, and voltage spike. It will protect the inverter quickly when city power instability. Old version: turn off the switch, the vestigial current and voltage in DC side may damage the ac mosfets. 2015 new version: when turn off the switch, it will turn off both Ac and Dc side, cut off IC signal, would not damage the mosfet. When input power have 600w , the efficiency can reach to 90% , fan would not work , high efficiency will lead inside not to fever, can save solar power; when input power reach 1200w , the efficiency will keep on 87.5%. 2015 new version only have 1 bi-color light. Low voltage: red light flash, inverter no work. High voltage: green light always on, inverter no work. Normal work situation: green light flash, higher watt flash faster. For this design you are very clear to know where is the problem if the inverter not work, very easy to know if from your solar panel or inverter. Sometimes, if you are using some heavy appliance like motor, enginee, cause the voltage up down very fast, in this moment, big amp will come into the grid tie inverter, easy to cause the ac mos burned, so surge protector will cut down by itself to protect the grid tie inverter. You may have experience, when meet the big lightning, the power source of the home appliance may damage, same reason, will also cause the inverter damage, in this moment, the lightining protection can release thousand voltage to protect the inverter not damage. High speed AC fuse. We now provide access to the ac fuse from the outside of the inverter. Each inverter will come our special ac fuse. This will protect the inverter in less than a millisecond to help prevent high voltage. Spikes from feeding back into the circuitry! Operating Principle For Grid Tie Power Inverter? When you use solar panel through grid tie inverter, your home power meter will reduce the speed(if you are using other electric appliances), or your home power meter will backward(if you are not use any appliances). The inverter can be connected to any outlet at home, when this line run by the conventional electric network. The inverter IC will monitors the volume, frequency and phase of the home grid, then produce a pure sine wave that the frequency and phase will be match the grid’s, and the volume will be higher than the grid’s, then according to our current controlled PWM, to control the output power to the grid. The inverter will puts out power when the home grid is on. Traditional grid tie inverter is the solar panel are connect in series, so if one solar panel did not work or bad efficiency, then the whole system will be effects, but power jack grid tie inverter, you can use every inverter in parallel, in this moment, each inverter has it’s own MPPT, can make every solar panel got the max power. Our grid tie inverter has 1 green light, when the charge fucntion is normal, then this green light will turn on, but if there are not dc sources(like in the night, no sun shine or raining day), the red led light will turn on, the inverter will stop to work, in this moment, the inverter will close the door, the home grid power will not back to inverter. When you set up the grid tie inverter. Pls put the AC plug first. After plug into the home ac source. Dont remove the plug anymore. Otherwise it may have hight voltage spikes. Then connect the DC input. When you want remove the grid tie inverter. Please take away the DC input first. Then you can remove the AC plug. Accessary: will including the AC power cord, DC cable will not including! Fast, Reliably and Directly!! Website for ref is. International Buyers Please Note. If you are satisfied with our product and service, pls kindly leave full stars good feedback for us. The item “1200W Grid Tie Inverter 28V-48VDC/110VAC With 3.5LCD & MPPT Charger Solar Panel” is in sale since Friday, April 10, 2015. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “powerinverter2010″ and is located in USA. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, ZA, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, PH, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, TR, BR, CL, CO, CR, PA, TT, GT, HN, JM.
1200W Grid Tie Inverter 28V-48VDC/110VAC With 3.5LCD & MPPT Charger Solar Panel
Category: 1200w | Comments Off
December 18

Magnum MS4024PAE Inverter Charger 120/240 Grid Tie ALL THE BELLS AND WHISTLES

Magnum MS4024PAE Inverter Charger 120/240 Grid Tie ALL THE BELLS AND WHISTLES

Magnum MS4024PAE Inverter Charger 120/240 Grid Tie ALL THE BELLS AND WHISTLES
This Magnum KIT includes: 1 x Magnum MS4024PAE Inverter/Charger, 4000W, 24VDC, Pure Sine Wave 1 x Magnum MMP250-30D Mini Panel (pre-wired) with 250Amp main breaker and two 30Amp breakers 1 x Magnum BP-MMP Back Plate for easy mounting on a wall, code approved! 1 x Magnum ME-RC50 Digital LCD Display Remote Panel with 50′ Cable 1 x Magnum MP-HOOD 1 x Magnum Battery Temperature Sensor. The MS-PAE Series Inverter/Charger from Magnum Energy is a pure sinewave inverter designed specifically for the most demanding renewable energy applications. When the power requirements of the system are beyond the capacity of a single MS-PAE Series inverter or the system is expanded as more loads are added, up to four MS-PAE Series inverters can be connected together in a parallel configuration. When connecting inverters in parallel, the overall inverter power and surge capacity is increased to power a large single load or more smaller loads. Available in 4000 (24 volts) and 4400 (48 volts) watt models, the MS-PAE Series inverters are powerful, easy-to-use and ETL listed to the stringent requirements of UL 1741 and CSA C22.2 No. 107.1-01 for Renewable Energy installations. The MS-PAE Series Inverter/Charger includes the following. High wattage output in a small footprint – less weight and area needed for install. Ability to parallel up to four identical MS-PAE inverters to increase output power capability (requires ME-RTR). Pure sine wave output (<5% THD). 120/240 VAC Split phase output in a single inverter. PFC (Power Factor Corrected) multi-stage battery charger. RS485 standard communication protocol. Remote and Network ports (easy connection for optional accessories). ON/OFF Inverter-mounted switch with LED indicator. Large AC access and terminal block [wire size: #18 to #2 AWG (0.82 to 33.6 mm2) CU]. DC terminal covers with 360 degree connection. Battery Temperature Sensor - for optimum charging during extreme temperature changes. Field Serviceable for qualifi ed personnel - tested repair kits available. Smooth, aesthetically pleasing design. MS4024PAE and MS4448PAE are ETL listed to UL/cUL STD 1741 and CSA STD 22.2 107.01-01 for safety. 18 - 34.0 VDC. Nominal AC output voltage. 120/240 VAC split phase. Output frequency and accuracy. 60 Hz ± 0.04%. Total Harmonic Distortion (THD). 1 msec surge current (amps AC). L-N: 120, L-L 70. 100 msec surge current (amps AC). L-N: 72, L-L 40. 5 sec surge power (real watts). 30 sec surge power (real watts). 5 min surge power (real watts). 30 min surge power (real watts). Maximum continuous input current. Power Consumption - inverting (no load). Continuous Output at 25 ºC. Input current at rated output (AC amps). 15 AAC per leg at 120/240 VAC split phase. General Features and Capabilities. 2 legs at 30A per leg transfer standard on all models. Five stage charging capability. Bulk, Absorb, Float, Equalize, and Battery Saver. Standard with included temp sensor (battery temp 0 to 50° C). 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans. Yes, with two overlapping circuits. Yes on transformer, MOSFETS, and battery. Conformal coating on PCBs for corrosion protection. Powder coated chassis & top for corrosion protection. Stainless steel fasteners for corrosion protection. ETL Listed to UL1741 and CSA STD C22.2 No. 20° C to +60° C (-4° F to 140° F). 40° C to +70° C (-40° F to 158° F). 0 to 95% RH non condensing. Dimensions (l x w x h). 13.75 x 12.65 x 8.0 (34.9 cm x 32.1 cm x 20.3 cm). Shelf or wall (vents not allowed to face downward unless ME-HOOD and ME-CB are installed). 15,000' (4570 m). Sellers: Add a FREE map to your listings. The item "Magnum MS4024PAE Inverter Charger 120/240 Grid Tie ALL THE BELLS AND WHISTLES" is in sale since Tuesday, December 17, 2013. This item is in the category "Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters". The seller is "hurricanewindpowercom" and is located in Roanoke, Virginia. This item can be shipped worldwide.
  • Brand: Magnum Energy
  • Model: MS4024PAE
  • Country of Manufacture: United States

Magnum MS4024PAE Inverter Charger 120/240 Grid Tie ALL THE BELLS AND WHISTLES
Category: magnum | Comments Off