1000W Solar Grid Tie Inverter with Power Limiter Sensor DC22-60V, 110/220VAC Auto

1000W MPPT Function Micro On Grid Tie Inverter 110V Used for 12V Solar Panel. 1000W Grid Tie Inverter MPPT Stackable DC20-45V to AC110V Pure Sine Wave Inverte. 600W Grid Tie Inverter MPPT Stackable DC20-60V AC110V Pure Sine Wave Inverter. 600W Grid Tie Pure Sine Wave Inverter 110V Used for 12V Solar Panel/24V Battery. MPPT 600W Solar Grid Tie Micro Inverter DC22-60V / AC110V for 24V/36V PV Panel. 2000W MPPT Grid Tie Inverter with Power Limiter Stackable DC45-90V to AC190-260V. 1000W MPPT Solar Grid Tie Inverter with Power Limiter Sensor DC 45-90V / 26-60V. 1000W MPPT Grid Tie Inverter DC10.8-30V to AC110V Solar Pure Sine Wave Inverter. 1000W Grid Tieinverter DC20-45V AC110V for 30V/36V PV Panel Solar Inverter MPPT. 1300W Grid Tie Inverter AC110V for 12V Solar Panel Pure Sine Wave Micro Inverter. 1300W Grid Tie Pure Sine Wave Micro Inverter DC20-45V for 30V/36V PV Panel MPPT. 300W 600W Solar Grid Tie Inverter MPPT Pure Sine Wave DC18-50V For 36V PV Panel. 600W Solar Grid Tie Micro Inverter MPPT Pure Sine Wave DC11-32V In / AC110V Out. 2000W Solar Grid Tie Inverter with Power Limiter Sensor DC45-90V to AC190-260V. 1000W Solar Grid Tie Inverter with Power Limiter Sensor DC22-60V, 110/220VAC Auto. Grid Tie Inverter DC Input 22-60V(Starting Voltage:26V). Grid Tie Inverter with Limiter Sensor. Delivers only the power needed by the load. Voc (solar panel) must not exceed 60V to ensure good output efficiency. Battery discharge power mode, Can auto regulate depth of discharge of the battery bank. Micro Inverter Max Power Point Tracking and AC Stackable, Anti-island protection. Intelligent LCD display various parameters. 1000W Grid Tie Inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. Smart Micro inverter is synchronized and in-phase with the utility grid. The electric apparatus in the house will use power from the inverter first. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. The 22-60V model inverter will start up at 26V, after starting, the inverter can work in 22V-60V. Solar Panel Voc cannot be higher than 60V. Vmp 30v-48v Solar panels connected in Parallel suggested, for example : 4 pcs 200-260w (Vmp 31v solar panels in parallel). Rated Power (Peak/Continuous): 1000W / 900W. DC Input Voltage: 22V60V. Peak Power Tracking Voltage: 2654V. AC Output Voltage Range. Grid Tie Power Inverter starting voltage:26V. AC Output Frequency Range: 46Hz65Hz. Stackable: Just for AC Output. Output Wareform: Pure sine wave. 1 x On Grid Inverter with Limiter(built-in) 1 x AC cable 1 x Internal type Limiter clamp with sensor & 2m cable 1 x English User Manual. Stackable connection:The purpose is let small power inverter become high-power inverter. Installation of GTIL With Internal Limiter. How to use the Power Limit function? Connects/clamps to one hot wire after the Main Circuit Breaker. Converts the magnetic field created by the flow of current in the wire into small AC voltage and current which is proportional to the power that passes through the wire. This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to one of the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. Limiter Setting on the LCD of the inverter. The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. Bat or solar limited current mode. This function is usable while using with battery. The setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level. MPPT function of the inverter will auto invalid when working under this setting. Set is 0.1V/step. Set is 0.1V/Step. Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods. (Only for Business Express). Feedback is very important to us. Please do not give us any bad feedback. If you can do as we say, we will be very grateful. Please give us the opportunity to resolve any problem. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “eprec-us” and is located in this country: CN. This item can be shipped to United States.

AC Output Frequency Range: 46Hz~65Hz
AC Output Voltage Range: 110V/220V Auto
Application: Home/Garden
Brand: Y&H
Charging Mode: MPPT (Maximum Power Point Tracking)
Color: Blue
Country/Region of Manufacture: China
DC Input Voltage: 22V~60V
Grid Tie Power Inverter starting voltage: 26V
Inverter Technology: Microinverter
Model: Grid Tie Inverter with Limiter
Output Wareform: Pure Sine Wave
Peak Power Tracking Voltage: 26~54V
Power: 1000W
Power Source: Solar
Rated Power (Peak/Continuous): 1000W / 900W
Stackable: Just for AC Output
System Configuration: Grid-Tie
Voltage: DC22-60V

Category: 1000w | Comments Off

August 11

Solar Power Inverter Grid Tie 1KW DC 22V-65V/45V-90V AC110V/ 230V Auto MPPT Wifi

1000W Solar Power Inverter Grid Tie DC 22V-65V /45V-90V AC110V/ 230V Auto MPPT limiter. Easy installation, can be paralleled on AC side. Nice LCD display various parameters including input voltage, output power, temperature, form etc. Can be integrated with internal limit function. With build in dump load function. RS485 extended interface serviceable. Power curve, output sine wave collect by wifi plug and monitor. Clamp Sensor with 2m cable—1pcs. It will be built-in side the inverter. How to use the grid tie inverter? 1 unit inverter installation / more units inverters in parallel. The inverter AC output can be connected in the AC plug of grid in the house. Using Grid Tie Inverter With Limiter Model. 2.1 The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. 2.2 The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. 2.3 The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. Installation of GTIL With Internal Limiter. 3.1 This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. 3.2 External protective device including dc and ac SPD(Surge protection device), dc and ac breaker, etc is recommended to installed in the system. Limiter Setting on the LCD of the inverter. The GTIL include three working mode. Work as normal GTI without power limitation. Work under Internal limiter mode. Work under External limiter mode. Pls make your setting on the LCD and save it, details setting operation please read the GTI manual. 5 Battery Discharge Power Mode. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter, this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. 6 Limiter Module Specification. Clamp sensor- Max 100A. Clamp sensor signal- 5v AC max mA. DC signal Cable- 5v DC, max mA. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “rodonite-7″ and is located in this country: CN. This item can be shipped worldwide.

Color: No Limiter No wifi
Input Voltage: DC45V-90V
Output Voltage: 110-230V Auto Sense
Size: 430*310*160mm
Current Rating: Other
Inverter Technology: Microinverter
Model: 3238515590
Country/Region of Manufacture: China
Maximum Input Power: Other
Is_customized: Yes
Custom Bundle: No
Output Frequency: 50HZ/60HZ(45-53Hz or 55Hz-63Hz)
Wattage: Other
Current Type: AC/DC
Product Line: Solar Power Inverter Grid Tie DC
System Configuration: Grid-Tie
Maximum Input Voltage: 45-90V
Power Source: Solar
Type: Solar Grid Tie Inverter
Features: Auto-limit function
MPN: 3238515618
Recommended Environment: Indoor/Outdoor
Item Length: Standard
Protection Properties: Other
Power: 1000W
Current Output: Other
Brand: Unbranded
Application: Home/Garden
Charging Mode: MPPT (Maximum Power Point Tracking)
Output Power: 1000W
Output Type: Single
Output wave: Pure Sine Wave
Warranty: 1 Year
Weight: 5KG
Accessories: AC Power Plugs (optional)
Display: LCD display
Resistance Properties: Other
Voltage: DC 22V-65V / 45V-90V to AC110V/ 230V

Category: solar | Comments Off

July 25

Micro Solar Inverter MPPT Grid Tie Hybrid Inverter 220V Auto Board Accessories

Micro Solar Inverter MPPT Grid Tie Hybrid Inverter 220V Auto Board Accessories. There are 2 version. WVC-600W-Life /WVC-700W-Life (Mobile APP). WVC-600W/WVC-700W (WIFI 433MHZ version). Inverter can be compatible with wife-modem. This price is without modem, just WVC solar grid tie inverter!!! This is WIFI version inverter and only works for WIFI modem. Inverter package don’t comes with WIFI Modem. If use the Modem, inverters also can remote monitoring by Mobile app, better use for Large-scale solar system. The inverter is equipped with 433MHz communication function as standard, and can communicate with our data collector (optional), and the data collector only needs to be connected to a wireless router to obtain various real-time data in the power station and upload it To the cloud server. Users only need to install our power station management application on their mobile phones to easily access various data in the power station and manage the power station. WVC 600W 700W Micro Inverter using IP65 waterproof streamline design, Can effectively prevent rainwater on the surface erosion, Built-in high-performance Maximum Power Point Tracking(MPPT)Function, Better able to track changes in the solar luminosity and control different output power, Effectively capture and collect sunlight. AC electric power transmission using the reverse transmission technology, Is one of our patented technology, The inverter output power can provide load priority use, Extra electricity to the grid, Efficient use of the inverter to the power emitted, Electricity transmission rate of up to 99%. The biggest feature of the photovoltaic grid-connected system is that the DC power generated by the photovoltaic array is converted into AC power that meets the requirements of the commercial power grid through the grid-connected inverter, and then directly connected to the commercial power grid. The power generated by the panel array in the grid-connected system is preferentially supplied to the AC At the load side, excess power is fed back to the grid. On rainy days or nights, when the photovoltaic array does not generate electrical energy or the generated electrical energy cannot meet the load demand, it is powered by the grid. The fifth generation WVC series communication products of us, adopt waterproof flow line design, which can provide better heat dissipation function for the equipment. The built-in maximum power point tracking engine (MPPT) can better capture changes in lighting, and it can work even in rainy weather. It can maximize the capture and collection of sunlight. The inverter is compatible with a variety of conventional solar panels with an open circuit voltage of 2260V, and the panel can exert its best performance through technical means. The power output mode of us Micro-Inverter is reverse transmission technology, which supplies power to the load first, and then uploads the excess power to the local power grid. Its conversion efficiency is as high as 95%. The product has multiple national invention and appearance patents, And has CE, CEC, INMETOR and other regional and national product certification. Installation of Micro Inverter. Step1Installation for fixed the inverter on the PV holder with the screws attached is as following. Connect the two DC terminal of the PV to the inverter, positive to positive, negative to negative. Step3Open the waterproof cap on AC output side of the micro inverter, then plug to AC power line. Plug the AC output line to main AC cable. Repeat the first step to the third step to complete the installation of micro inverters. Installation of micro inverter. Installation for fixed the inverter on the PV holder with the screws attached is as following. Open the waterproof cap on AC output side of the micro inverter, then plug to AC power line. Piece MPPT Waterproof Inverter. With 1 meter AC power cable. Fixing use Screws and Nuts 1 Set. Piece User Manual (English). There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “gintarelis-7″ and is located in this country: CN. This item can be shipped worldwide.

Color: WVC600 WIFI 433MHZ
Input Voltage: DC22-60V
Output Voltage: 85-263V Auto Match
Size: 289mm*200mm*38mm
Current Rating: Standard
Inverter Technology: Hybrid
Model: 4859310751
Country/Region of Manufacture: China
Connector Type: Other
Maximum Input Power: Standard
Custom Bundle: No
Wattage: Standard
Current Type: AC
Product Line: Micro Solar Inverter
System Configuration: Grid-Tie
Material: Other
Maximum Input Voltage: 22-50V
Type: DC/AC Inverters
Features: All Daylight Conditions
Wire Gauge: Standard
MPN: 4859310776
Recommended Environment: Other
Item Length: Standard
Protection Properties: Other
Connector Configuration: Standard
Power: Standard
Current Output: Standard
Brand: Unbranded
Application: Electronics
Maximum Flow Rate: Standard
Charging Mode: MPPT (Maximum Power Point Tracking)
Function: With wireless communication function
Is_customized: Yes
Output Frequency: 50hz/60HZ
Output Type: Single
Wave form: Pure sine wave
Resistance Properties: Child Resistant
Voltage: 80-280V

Category: micro | Comments Off

May 31

1400W 2.4G Wireless Waterproof AUTO 120V/230V MPPT Solar Grid Tie Micro Inverter

1400W Micro On Grid Tie Inverter Home MPPT 30V 36V Solar Inversor Pure Sine Wave Auto 110V 220V Output for 4350W PV Plate. Grid Tie Inverter Using IP65 waterproof streamline design, Can effectively prevent rainwater on the surface erosion. Please do not install outdoors, avoid rain. You can install it in a ventilated, dry, cool place. High performance Maximum Power Point TraCKING(MPPT) and Autolock maximum Power Point. Advantage of Micro Inverter? Single unit connects up to four PV modules? Maximum 1400W AC output power? Single-phase output, Flexible 3-phase PV systems? 2.4G wireless communication and monitoring? Up to 6 units (230V) per branch? Customizable various input (DC, PV) voltage range? Integrated AC bus cable, Ready-To-Use? Low cost, Easy installatio. Package Included: 1 x Solar Micro Inverter. 1 x Bag Screw 1 x English User’s Manual 1 x Box. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “focalmall” and is located in this country: CN. This item can be shipped worldwide.

Type: Wireless Waterproof Micro Inverter
Brand: NE
Resistance Properties: Waterproof
Inverter Technology: Microinverter
System Configuration: Grid-Tie
Voltage: Auto Compatible 120VAC,230 VAC

Category: 1400w | Comments Off

February 15

400W Microinvert Grid Tie Inverter DC18-50V to AC 110/220V Auto Waterproof IP65

Housing Back Battery Case. For Samsung Galaxy S7 / S6 / S5 LCD Display Touch Screen Digitizer Replacement. For LG Stylo 6 Q730 Stylo 5 Q720MS Stylus Pen Replacement for LG Stylo 4 Q710MS. Shockproof Aluminum Gorilla Glass Case for iPhone 13 Mini Pro Max 12 11 Xs 7 8+. Touchscreen Pencil S-Pen Stylus Generic Pen For Apple iPad Pro 9.7in 10.5 12.9in. For Samsung Galaxy Note 5 N920 TFT LCD Display Screen Touch Digitizer Assembly. For Samsung Galaxy A22 4G SM-A225 A225F OLED LCD Display Digitizer Screen +Frame. For Apple iPad Mini4 2015 A1538 A1550 LCD Display Touch Screen Digitizer White. 2GB RAM For Crucial CT25664AC800 PC2-6400 DDR2-800 SODIMM Laptop Memory Replace. 8GB DDR3 1333MHz PC3-10600U Desktop DIMM Memory AMD Motherboard RAM AM3 AM3+ QC. LCD Display Screen Digitizer TFT For Samsung Galaxy Note 5 N920 N920A N920V/T. 400W Microinvert Grid Tie Inverter DC18-50V to AC 110/220V Auto Waterproof IP65. Precise maximum power point tracking. MPPT algorithm can optimize the power collection from solar panels. It accurately captures and collects sunlight, and locks in the maximum output power points, significantly increasing over 25% of the power generation. With the monitoring system, it can help you monitor the power generation efficiency of the power station and reduce workforce expenses. Reverse power transmission. With efficient reverse power transmission technology, the power transmission rate up to 99.9%. Full digital control can be achieved by using intelligent soft switching technology and built-in MCU for charging modules; Introducing high-frequency switching power supply and SPWM control technology. It features strong anti-interference ability, fast calculation speed, a high degree of intelligence, high control precision, and excellent output waveform. IP65 waterproof design and aluminum alloy material can effectively prevent rainwater erosion on the surface. It provides electrical isolation, more reliable to use. It offers multiple protection functions, such as over-current protection, short circuit protection, low-voltage protection, over high voltage protection. In order to satisfy higher power requirements, the solar micro inverter can be used in stacks, and the number of stacks is unlimited, which can form a single-phase parallel stack system. After the power station is installed, there is almost no need to do maintenance work. This solar power grid-tie micro-inverter is suitable for various household appliances. It can convert the DC power generated by solar panels into AC power available for household appliances. Our solar inverter provides sustainable energy and brings excellent environmental benefits. This is a Grid-Tie inverter, which means connecting the Grid power to the “AC output” would be necessary for Grid-tie power generation. Please check the voltage is 110V or 220V as well, different options according to the Grid voltage. If taking the solar panels as the input instead of batteries, “VOC” Voltage should be set in the range of 30-48V, the solar panels’ power is set 20% bigger than the inverter’s output power would be recommended. For the 600W inverter, the total solar panels’ total output power should be 700-750W. For the 1200W inverter, the total power should be 12001400W. If taking the battery packs as input, 36V battery packs would be firstly recommended, three 12V batteries are connecting in series to 36V would be fine. When wires the inverter, please follow the indication in the inverter, Pos (+) to Pos (+), Neg(-) to Neg (-). Regarding the battery’s capacity, 36V/10mah to 300W, 36V/20mah to the 600W inverter, and 36V/40-45mah to the 1200W inverter. Please check the configuration, input and output voltage are totally in the allowance, ensure the inverter could run normally and Grid to Grid generation. Please properly install the inverters and connnet the groud safety. Forbid openning the shell with non-professional person, only qualified maintenance person can repair the product. The inverter should be installed in the low humidity and well ventilated place. Please keep away from combustibles and children. Double check with the DC input and AC output when connect with PV. The Vmp and Voc of PV should be fuit for the prodcut for get output max. Model: SG400MD Input(DC): Peak Power Tracking Volt Range: 24-40V Operating Volt Range: 18-50V Max. Input Volt: 50V DC Min/Max Start Volt: 18-50V Maximum Input Power: 2200W Maximum Dc Short Current: 28A. Operating Temperature Range:-40? Dimensions (L X W X H):185mm x 180mm x 38.5mm Net Weight:1.5KG Waterproof Level:IP65 Cooling:Self-cooling Communication Mode:2.4G Wireless Certificate:CE. Package: 1x Solar Grid Tie Micro Inverter. MPPT (Maximum Power Point Tracking). Read the item description carefully instead of only the listing title. Choose the correct item from the drop-down menu (if applicable) before clicking on the add to cart button. If you have any questions regarding the item, please send us a message before purchasing. We highly recommend to our customers to test the LCD and make sure it is fully functioning before installation since the components on the LCD is fragile and can easily be damaged by static electricity or other factors that causes image or touch issues. DOA (Dead On Arrival). Wear Anti-Static Gloves or a Wrist Strap to release any static electricity before touching the LCD. Check the pins on the flex cable connector to see if any of them is bent or missing. Check around the LCD and make sure none of the components are damaged. Check the light reflection on the LCD under a lamp to see if any of the areas have a different color. Connect the LCD and Digitizer/Touch flex cables to your device’s motherboard connectors first. DO NOT install the LCD onto the device BEFORE testing the parts! Move an icon around on your screen to make sure the display and touch are fully functional. Before purchasing, please make sure that your address is correct. We try our best to reply to your emails as soon as possible, however, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. We will solve any from problem for our valued customer. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “bestcasesupplier” and is located in this country: US. This item can be shipped to United States.

Inverter Technology: Microinverter
Model: Solar Microinverter
Country/Region of Manufacture: China
Current Type: AC/DC
System Configuration: Grid-Tie
Power Source: Solar
Type: Charger/Inverter
Brand: Unbranded
Charging Mode: MPPT (Maximum Power Point Tracking)
Waterproof: IP65
Voltage: 18-50 V

Category: 400w | Comments Off

February 8

2000W MPPT Solar Grid Tie Inverter Power Limiter DC45-90V to AC220V 50/60HZ Auto

600W Grid Tie Inverter DC30-55V for 30V/36V Solar Panel Pure Sine Wave Inverter. 600W MPPT Grid Tie Inverter DC16-28V to AC110V for 12V Solar Panel/24V Battery. MPPT 600W Grid Tie Inverter AC110V for 30V/36V PV Panel Pure Sine Wave Inverter. 1000W Grid Tie Inverter MPPT DC16-28V to AC110V Solar Pure Sine Wave Inverter. 1000W Grid Tie Inverter Stackable MPPT DC30-45V to AC110V Pure Sine Wave Inverte. 1300W Solar Grid Tie Inverter DC16-28V to AC110V Pure Sine Wave Micro Inverter. 1300W Grid Tie Inverter DC30-46V to AC110V Solar Pure Sine Wave Micro Inverter. 1400W Grid Tie Inverter DC16-28V for 18V Solar Panel Pure Sine Wave Inverter. 1400W Grid Tie Inverter DC30-46V for 30V/36V Solar Panel Pure Sine Wave Inverter. 2000W Grid Tie Inverter with Limiter Sensor MPPT Stackable DC45-90V to AC190-260. 1000W Solar Grid Tie Inverter with Power Limiter DC22-65V / DC45-90V for Home PV. 700W Solar Microinverter MPPT Grid Tie Inverter DC18-50V for 36V PV Panel AC110V. 300W Solar Grid Tie Inverter DC18-50V to AC110V Pure Sine Wave Inverter 50HZ/60H. 600W Waterproof Grid Tie Inverter DC18-50V Pure Sine Wave Inverter 2.4G Wireless. 3.5KW Hybrid Solar Inverter 220V 24V 500VDC PV Input MPPT 100A Solar Controller. 5.5KW Hybrid Solar Inverter 220V 48V 500VDC PV Input MPPT 100A Solar Controller. Hybrid Solar Inverter WIFI Module for VM Plus 3.5KW/5.5KW Hybrid Inverter. 5.5KW Hybrid Solar Inverter 48V 220VAC MPPT 110A Pure Sine Wave Hybrid Inverter. 3.5kw Solar Hybrid Inverter 24V 220V MPPT 100A Solar Controller 500VDC PV Input. 5.5kw Solar Hybrid Inverter 48V 220V MPPT 100A Solar Controller 500VDC PV Input. 3000W 24V Pure Sine Wave Off Grid Hybrid Inverter with 50A PWM Solar Controller. 2400W Hybrid Solar Inverter 24VDC 220VAC 50A PWM 3KVA Pure Sine Wave Inverter. 3KVA Solar Inverter Hybrid 24VDC 220VAC PWM 50A Pure Sine Wave Off Grid Inverter. 2400W Hybrid Solar Inverter 24VDC 220VAC 40A MPPT 3KVA Pure Sine Wave Inverter. 1000W Grid Tie Inverter DC16-28V to AC110V for 12V Solar Panel Microinverter. 1000W Grid Tie Micro Inverter DC30-45V to AC110V Solar Pure Sine Wave Inverter. 600W Grid Tie Micro Inverter Stackable MPPT Pure Sine Wave DC30-55V to AC110V. 600W Solar Grid Tie Micro Inverter MPPT Pure Sine Wave DC30-55V In to AC110V Out. 600W Solar Grid Tie Micro Inverter MPPT DC16-28V AC110V Pure Sine Wave Inverter. 1000W MPPT Solar Grid Tie Inverter Power Limiter Sensor DC26-60V to AC110V USA. 1200W Solar Grid Tie Inverter Waterproof IP65 DC28-50V Pure Sine Wave Inverter. 600W Solar Grid Tie Inverter DC28-50V Pure Sine Wave Inverter Waterproof + LCD. 2000W MPPT Solar Grid Tie Inverter Power Limiter DC45-90V to AC220V 50/60HZ Auto. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter, this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Continuous Power Output:1950W Peak Power Output:2000W Input DC Voltage Range:45V 90V Peak power tracking voltage:50V-90V AC Output Voltage Range:190VAC 260VAC Output Frequency:46Hz65Hz Standby Power Consumption. How to use the Inverter? Standard Grid Tie Inverter Model. More than 1 unit inverters stackable. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. All excess power that is not needed by the load is then exported to the Grid. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Using Grid Tie Inverter With Limiter Model. The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. Installation of GTIL With Internal Limiter. This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. External protective device including dc and ac SPD(Surge protection device), dc and ac breaker, etc is recommended to installed in the system. Limiter Setting on the LCD of the inverter. The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. 5 Battery Discharge Power Mode. 6 Limiter Module Specification. Clamp sensor- Max 100A. Clamp sensor signal- 5v AC max mA. DC signal Cable- 5v DC, max mA. 1 x Solar Grid Inverter with Limiter 1 x Internal type Limiter clamp with sensor & 2m cable 1 x English User Manual. Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods. (Only for Business Express). Feedback is very important to us. Please do not give us any bad feedback. If you can do as we say, we will be very grateful. Please give us the opportunity to resolve any problem. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “maihuiyan” and is located in this country: US. This item can be shipped to United States.

AC Output Voltage Range: 190VAC ~ 260VAC
Application: Home/Garden
Brand: Y&H
Charging Mode: MPPT (Maximum Power Point Tracking)
Color: Blue
Continuous Power Output: 1950W
Country/Region of Manufacture: China
Input DC Voltage Range: 45V ~ 90V
Inverter Technology: Microinverter
Model: Grid Tie Inverter with Power Limiter
MPPT Function: Yes
Output Frequency: 46Hz~65Hz
Output Wave Form: Pure Sine Wave
Peak Power Output: 2000W
Power: 2000W
Power Source: Solar
Recommended Environment: Indoor
Stackable: Yes
System Configuration: Grid-Tie
Voltage: DC45-90V

Category: 2000w | Comments Off

January 7

1000W LCD Display Grid Tie DC 22-60 VDC Auto Switch InverterFAST FREE SHIPPING

1000W LCD Display Grid Tie DC 22-60 VDC Auto Switch Inverter. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “cscs9339″ and is located in this country: US. This item can be shipped to United States.

Current Type: DC
System Configuration: Grid-Tie
Voltage: 22-60 VDC
Features: LCD Display
Brand: Sun
MPN: L03020201005-1

Category: 1000w | Comments Off

October 17

1000W Solar Grid Tie Inverter with Power Limiter DC45-90V/DC26-60V 50/60HZ Auto

600W Solar Microinverter Grid Tie Inverter Pure Sine Wave DC11-32V In AC230V Out. 600W Grid Tie Micro Inverter DC30-55V to AC230V MPPT Pure Sine Wave Inverter CE. 1000W Solar Grid Tie Microinverter AC230V Pure Sine Wave Inverter 50HZ/60HZ Auto. 1300W Solar Grid Tie Inverter MPPT Pure Sine Wave DC10.8-30V Input AC230V Output. 1300W Solar Grid Tie Inverter MPPT Pure Sine Wave DC20-45V Input AC230V Output. 1400W Solar Microinverter Grid Tie Inverter Stackable MPPT DC10.8-32V to AC230V. 1400W Solar Microinverter Grid Tie Inverter Stackable MPPT DC22-50V to AC230V CE. 300W Solar Microinverter Grid Tie Inverter DC26-46V to AC230V for 36V PV Panel. 350W Solar Grid Tie Micro Inverter DC26-46V to AC230V Pure Sine Wave Inverter CE. 500W Solar Wechselrichter Grid Tie Inverter Voc26-46V to AC230V for 36V PV Panel. Solar Wechselrichter 600W Grid Tie Inverter Voc26-46V to AC230V for 36V PV Panel. 700W Solar Wechselrichter Grid Tie Inverter Voc38-46V to AC230V for 36V PV Panel. 300W Waterproof Solar Grid Tie Inverter DC26-46V to AC230V with 2.4G Wireless CE. 600W Waterproof Solar Grid Tie Inverter DC18-50V to AC230V with 2.4G Wireless CE. 700W Waterproof Solar Grid Tie Inverter DC26-46V to AC230V with 2.4G Wireless CE. 2.4G Wireless Communication and MonitorinBox, For SG Series Solar Microinverter. 600W Waterproof Grid Tie Inverter DC22-50V/AC230V Solar Pure Sine Wave Inverter. 120W/150W/180W Solar Grid Tie Micro Inverter DC16-26V to AC220V for 12V PV Panel. 1000W Solar Power Grid Tie Inverter with Limiter Sensor MPPT DC26-60V to AC230V. 2000W Solar Grid Tie Inverter w/Power Limiter Pure Sine Wave DC45-90V to AC230V. 3.5KW Off Grid Hybrid Inverter MPPT 100A 500VDC PV Input Pure Sine Wave Inverter. 5.5KW Hybrid Solar Inverter MPPT 100A 220VAC 48VDC Pure Sine Wave Hybrid Inverte. 3000VA/2400W Hybrid Solar Inverter 24VDC 230VAC 50A PWM Pure Sine Wave Inverter. 2400W Hybrid Solar Inverter 24VDC 220VAC 50A PWM Off Grid Pure Sine Wave Inverte. 3KVA Hybrid Solar Inverter 24VDC 230VAC 50A PWM 2400W Pure Sine Wave Inverter. 500W/600/700W Solar Grid Tie Inverter DC26-46V to AC230V Pure Sine Wave Inverter. 300W/600W Grid Tie Inverter DC26-46V for 36V Solar Panel Pure Sine Wave Inverter. 600W Grid Tie Micro Inverter for 12V/24V/36V Solar Panel Pure Sine Wave Inverter. 1000W Solar Grid Tie Inverter with Power Limiter DC45-90V/DC26-60V 50/60HZ Auto. Grid Tie Inverter DC Input 22-60V(Starting Voltage 26V) / 45-90V(Starting Voltage 49.5V). Grid Tie Inverter with Limiter Sensor. Delivers only the power needed by the load. Voc (solar panel) must not exceed 60V / 90V to ensure good output efficiency. Battery discharge power mode, Can auto regulate depth of discharge of the battery bank. Micro Inverter Max Power Point Tracking and AC Stackable, Anti-island protection. Intelligent LCD display various parameters. Applied Standards: VDE-AR-N 4105:2018-11;DIN VDE V 0124-100:2020-06. 1000W Grid Tie Inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. Smart Micro inverter is synchronized and in-phase with the utility grid. The electric apparatus in the house will use power from the inverter first. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. The 22-60V model inverter will start up at 26V, after starting, the inverter can work in 22V-60V. Solar Panel Voc cannot be higher than 60V. Vmp 30v-48v Solar panels connected in Parallel suggested, for example : 4 pcs 200-260w (Vmp 31v solar panels in parallel). Rated Power (Peak/Continuous): 1000W / 900W DC Input Voltage: 22V60V Peak Power Tracking Voltage: 2654V AC Output Voltage Range:110/220V Auto Grid Tie Power Inverter starting voltage 26V AC Output Frequency Range: 46Hz65Hz Stackable: Just for AC Output Output Wareform: Pure sine wave. Rated Power (Peak/Continuous): 1000W / 900W DC Input Voltage: 45V90V AC Output Voltage Range: 110/220V Auto Peak power tracking voltage: 49.582V AC Output Frequency Range: 46Hz65Hz Peak Inverter Efficiency: 92% Stackable: Just for AC Output Output Wareform: Pure sine wave. Stackable connectionThe purpose is let small power inverter become high-power inverter. Installation of GTIL With Internal Limiter. How to use the Power Limit function? Connects/clamps to one hot wire after the Main Circuit Breaker. Converts the magnetic field created by the flow of current in the wire into small AC voltage and current which is proportional to the power that passes through the wire. This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to one of the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. Limiter Setting on the LCD of the inverter. The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. Bat or solar limited current mode. This function is usable while using with battery. The setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level. MPPT function of the inverter will auto invalid when working under this setting. Set is 0.1V/step. Set is 0.1V/Step. 1 x On Grid Inverter with Limiter(built-in) 1 x AC cable 1 x Internal type Limiter clamp with sensor & 2m cable 1 x English User Manual. Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods. (Only for Business Express). Feedback is very important to us. Please do not give us any bad feedback. If you can do as we say, we will be very grateful. Please give us the opportunity to resolve any problem. The item “1000W Solar Grid Tie Inverter with Power Limiter DC45-90V/DC26-60V 50/60HZ Auto” is in sale since Thursday, July 22, 2021. This item is in the category “Heimwerker\Erneuerbare Energie\Wechselrichter & Inverter”. The seller is “solarlive03yh” and is located in shenzhen. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

Marke: Y&H
Modell: Grid Tie Inverter with Power Limiter Sensor
Herstellernummer: nicht zutreffend
Herstellungsland und -region: China
AC Output Voltage Range: 110/220V Auto
DC Input Voltage: DC45V~90V or DC22V~60V
Frequency Range: 46Hz~65Hz
Output Wareform: Pure sine wave
Applied Standards: VDE-AR-N 4105:2018-11; DIN VDE V 0124-100:2020-06
Inverter-Technologie: Mikroinverter

Category: 1000w | Comments Off

October 1

Microinvert Grid Tie Inverter 400W DC18-50V to AC 110/220V Auto Waterproof IP65

For Samsung Galaxy Note 10 / Note 10 Plus S Pen Touch Stylus Pen Pencil US. Asus B85M-G CSM/SI Mainboard For Micro ATX DDR3 LGA 1150 Motherboard Systemboard. For Samsung Galaxy Note 8 N950 New Stylus S Pen Verizon T-Mobile Sprint AT&T. Purple Stylus Touch S Pen for Samsung Galaxy Note 9 AT&T Verzion T-Mobile Sprint. For Samsung A51 A515 SM-A515F SM-A515U LCD Display Touch Screen Digitizer Frame. Shockproof Armor Heavy Duty Case Full Body 360 Cover For Samsung Galaxy S21 5G. 2pcs 4GB Memory For Kingston DDR3 1333 PC3-10600U CL9 240 KVR1333D3N9/4G Memory. For LG Q7 Plus Alpha Q7A Q610FS USA LCD Display Touch Screen Digitizer Assembly. New LCD Display Touch Screen + Frame For Huawei P Smart 2019 POT-L21 L23 LX1 LX3. For Samsung galaxy A30s A30 A40 A50 LCD Screen Digitizer Replacement Frame Tool. Microinvert Grid Tie Inverter 400W DC18-50V to AC 110/220V Auto Waterproof IP65. MPPT TECHNOLOGY – Precise maximum power point tracking. MPPT algorithm can optimize the power collection from solar panels. It accurately captures and collects sunlight, and locks in the maximum output power points, significantly increasing over 25% of the power generation. With the monitoring system, it can help you monitor the power generation efficiency of the power station and reduce workforce expenses. HIGH PERFORMANCE – Reverse power transmission. With efficient reverse power transmission technology, the power transmission rate up to 99.9%. Full digital control can be achieved by using intelligent soft switching technology and built-in MCU for charging modules; Introducing high-frequency switching power supply and SPWM control technology. It features strong anti-interference ability, fast calculation speed, a high degree of intelligence, high control precision, and excellent output waveform. PROTECTIVE & RELIABLE – IP65 waterproof design and aluminum alloy material can effectively prevent rainwater erosion on the surface. It provides electrical isolation, more reliable to use. It offers multiple protection functions, such as over-current protection, short circuit protection, low-voltage protection, over high voltage protection. FLEXIBLE INSTALLATION- In order to satisfy higher power requirements, the solar micro inverter can be used in stacks, and the number of stacks is unlimited, which can form a single-phase parallel stack system. After the power station is installed, there is almost no need to do maintenance work. SUSTAINABLE USE – This solar power grid-tie micro-inverter is suitable for various household appliances. It can convert the DC power generated by solar panels into AC power available for household appliances. Our solar inverter provides sustainable energy and brings excellent environmental benefits. This is a Grid-Tie inverter, which means connecting the Grid power to the “AC output” would be necessary for Grid-tie power generation. Please check the voltage is 110V or 220V as well, different options according to the Grid voltage. If taking the solar panels as the input instead of batteries, “VOC” Voltage should be set in the range of 30-48V, the solar panels’ power is set 20% bigger than the inverter’s output power would be recommended. For the 600W inverter, the total solar panels’ total output power should be 700-750W. For the 1200W inverter, the total power should be 12001400W. If taking the battery packs as input, 36V battery packs would be firstly recommended, three 12V batteries are connecting in series to 36V would be fine. When wires the inverter, please follow the indication in the inverter, Pos (+) to Pos (+), Neg(-) to Neg (-). Regarding the battery’s capacity, 36V/10mah to 300W, 36V/20mah to the 600W inverter, and 36V/40-45mah to the 1200W inverter. Please check the configuration, input and output voltage are totally in the allowance, ensure the inverter could run normally and Grid to Grid generation. Please properly install the inverters and connnet the groud safety. Forbid openning the shell with non-professional person , only qualified maintenance person can repair the product. The inverter should be installed in the low humidity and well ventilated place. Please keep away from combustibles and children. Double check with the DC input and AC output when connect with PV. The Vmp and Voc of PV should be fuit for the prodcut for get output max. Model: SG400MD Input(DC): Peak Power Tracking Volt Range: 24-40V Operating Volt Range: 18-50V Max. Input Volt: 50V DC Min/Max Start Volt: 18-50V Maximum Input Power: 2200W Maximum Dc Short Current: 28A. Operating Temperature Range:-40 to +65 Dimensions L X W X H:185mm x 180mm x 38.5mm Net Weight:1.5KG Waterproof Level:IP65 Cooling:Self-cooling Communication Mode:2.4G Wireless Certificate:CE. Package: 1x Solar Grid Tie Micro Inverter. MPPT (Maximum Power Point Tracking). Read the item description carefully instead of only the listing title. Choose the correct item from the drop-down menu (if applicable) before clicking on the add to cart button. If you have any questions regarding the item, please send us a message before purchasing. We highly recommend to our customers to test the LCD and make sure it is fully functioning before installation since the components on the LCD is fragile and can easily be damaged by static electricity or other factors that causes image or touch issues. Wear Anti-Static Gloves or a Wrist Strap to release any static electricity before touching the LCD. Check the pins on the flex cable connector to see if any of them is bent or missing. Check around the LCD and make sure none of the components are damaged. Check the light reflection on the LCD under a lamp to see if any of the areas have a different color. Connect the LCD and Digitizer/Touch flex cables to your device’s motherboard connectors first. DO NOT install the LCD onto the device BEFORE testing the parts! Move an icon around on your screen to make sure the display and touch are fully functional. The order will be sent out within 24 Hours. We try our best to reply to your emails as soon as possible, however, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. We will solve any from problem for our valued customer. The item “Microinvert Grid Tie Inverter 400W DC18-50V to AC 110/220V Auto Waterproof IP65″ is in sale since Saturday, September 4, 2021. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “motocar-part” and is located in Chino, California. This item can be shipped to United States.

Brand: Unbranded
Country/Region of Manufacture: China
Inverter Technology: Microinverter
Model: Solar Microinverter
MPN: Does Not Apply
Power Source: Solar
System Configuration: Grid-Tie
UPC: Does not apply
Type: Charger/Inverter
Voltage: 18-50 V
Charging Mode: MPPT (Maximum Power Point Tracking)
Current Type: AC/DC
Waterproof: IP65

Category: microinvert | Comments Off

September 22

1200W Microinvert Grid Tie Inverter DC18-50V to AC 110/220V Auto Waterproof IP65

LCD Touchscreen for Samsung. LCD Touchscreen for iWatch. LCD Touchscreen for iPad. LCD Touchscreen for iPhone. LCD Touchscreen for Macbook. LCD Touchscreen for LG. LCD Touchscreen for Motorola. LCD Touchscreen for Huawei. LCD Touchscreen for ASUS. LCD Touchscreen for OnePlus. LCD Touchscreen for Google. LCD Touchscreen for Xiaomi. LCD Touchscreen for Sony. LCD Touchscreen for BlackBerry. LCD Touchscreen for Alcatel. LCD Touchscreen for Microsoft. LCD Touchscreen for Amazon. LCD Touchscreen for T-Mobile. LCD Touchscreen for Nokia. LCD Touchscreen for Lenovo. LCD Touchscreen for Nintendo. Housing Back Battery Case. Touchscreen Pencil S-Pen Stylus Generic Pen For Apple iPad Pro 9.7in 10.5 12.9in. LCD Display Screen Touch Digitizer Frame Replace For Oneplus 3 / 3T A3000 A3003. For Samsung Galaxy Note 5 N920 TFT LCD Display Screen Touch Digitizer Assembly. LCD Display Touch Screen Digitizer Home Button for iPad 2017 5th Gen A1822 A1823. For LG Stylo 6 Q730 Stylo 5 Q720MS Stylus Pen Replacement for LG Stylo 4 Q710MS. For iPad Air 3 3rd Gen 2019 A2153 A2123 A2152 LCD Display Touch Screen Assembly. LCD Display Glass Touch Screen Digitizer For Samsung Galaxy A11 SM-A115. For Samsung Galaxy A02S SM-A025 LCD Display Touch Digitiser Frame Assembly Tool. Black For Apple iPhone XR Front Outer Screen Glass Lens with OCA Replacement. For Samsung Galaxy A02S A025 European Version LCD Display Touch Digitiser Frame. 1200W Microinvert Grid Tie Inverter DC18-50V to AC 110/220V Auto Waterproof IP65. MPPT TECHNOLOGY – Precise maximum power point tracking. MPPT algorithm can optimize the power collection from solar panels. It accurately captures and collects sunlight, and locks in the maximum output power points, significantly increasing over 25% of the power generation. With the monitoring system, it can help you monitor the power generation efficiency of the power station and reduce workforce expenses. HIGH PERFORMANCE – Reverse power transmission. With efficient reverse power transmission technology, the power transmission rate up to 99.9%. Full digital control can be achieved by using intelligent soft switching technology and built-in MCU for charging modules; Introducing high-frequency switching power supply and SPWM control technology. It features strong anti-interference ability, fast calculation speed, a high degree of intelligence, high control precision, and excellent output waveform. PROTECTIVE & RELIABLE – IP65 waterproof design and aluminum alloy material can effectively prevent rainwater erosion on the surface. It provides electrical isolation, more reliable to use. It offers multiple protection functions, such as over-current protection, short circuit protection, low-voltage protection, over high voltage protection. FLEXIBLE INSTALLATION- In order to satisfy higher power requirements, the solar micro inverter can be used in stacks, and the number of stacks is unlimited, which can form a single-phase parallel stack system. After the power station is installed, there is almost no need to do maintenance work. SUSTAINABLE USE – This solar power grid-tie micro-inverter is suitable for various household appliances. It can convert the DC power generated by solar panels into AC power available for household appliances. Our solar inverter provides sustainable energy and brings excellent environmental benefits. This is a Grid-Tie inverter, which means connecting the Grid power to the “AC output” would be necessary for Grid-tie power generation. Please check the voltage is 110V or 220V as well, different options according to the Grid voltage. If taking the solar panels as the input instead of batteries, “VOC” Voltage should be set in the range of 30-48V, the solar panels’ power is set 20% bigger than the inverter’s output power would be recommended. For the 600W inverter, the total solar panels’ total output power should be 700-750W. For the 1200W inverter, the total power should be 12001400W. If taking the battery packs as input, 36V battery packs would be firstly recommended, three 12V batteries are connecting in series to 36V would be fine. When wires the inverter, please follow the indication in the inverter, Pos (+) to Pos (+), Neg(-) to Neg (-). Regarding the battery’s capacity, 36V/10mah to 300W, 36V/20mah to the 600W inverter, and 36V/40-45mah to the 1200W inverter. Please check the configuration, input and output voltage are totally in the allowance, ensure the inverter could run normally and Grid to Grid generation. Please properly install the inverters and connnet the groud safety. Forbid openning the shell with non-professional person , only qualified maintenance person can repair the product. The inverter should be installed in the low humidity and well ventilated place. Please keep away from combustibles and children. Double check with the DC input and AC output when connect with PV. The Vmp and Voc of PV should be fuit for the prodcut for get output max. Specifications: Model:SG1200MQ Input(DC): Peak Power Tracking Volt Range: 24-40V Operating Volt Range: 18-50V Max. Input Volt: 50V DC Min/Max Start Volt: 18-50V Maximum Input Power: 4300W Maximum Dc Short Current: 412A. Operating Temperature Range:-40 to +65 Dimensions L X W X H:250mm x 230mm x 38mm Net Weight:2.5KG Waterproof Level:IP65 Cooling:Self-cooling Communication Mode:2.4G Wireless Certificate:CE. Package: 1x Solar Grid Tie Micro Inverter. MPPT (Maximum Power Point Tracking). Read the item description carefully instead of only the listing title. Choose the correct item from the drop-down menu (if applicable) before clicking on the add to cart button. If you have any questions regarding the item, please send us a message before purchasing. We highly recommend to our customers to test the LCD and make sure it is fully functioning before installation since the components on the LCD is fragile and can easily be damaged by static electricity or other factors that causes image or touch issues. DOA (Dead On Arrival). Wear Anti-Static Gloves or a Wrist Strap to release any static electricity before touching the LCD. Check the pins on the flex cable connector to see if any of them is bent or missing. Check around the LCD and make sure none of the components are damaged. Check the light reflection on the LCD under a lamp to see if any of the areas have a different color. Connect the LCD and Digitizer/Touch flex cables to your device’s motherboard connectors first. DO NOT install the LCD onto the device BEFORE testing the parts! Move an icon around on your screen to make sure the display and touch are fully functional. Before purchasing, please make sure that your address is correct. We try our best to reply to your emails as soon as possible, however, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. We will solve any from problem for our valued customer. The item “1200W Microinvert Grid Tie Inverter DC18-50V to AC 110/220V Auto Waterproof IP65″ is in sale since Wednesday, August 4, 2021. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “bestcasesupplier” and is located in Ontario, California. This item can be shipped to United States.

Brand: Unbranded
Country/Region of Manufacture: China
Inverter Technology: Microinverter
Model: Solar Microinverter
MPN: Does Not Apply
Power Source: Solar
System Configuration: Grid-Tie
UPC: Does not apply
Type: Charger/Inverter
Voltage: 18-50 V
Charging Mode: MPPT (Maximum Power Point Tracking)
Current Type: AC/DC
Waterproof: IP65

Category: 1200w | Comments Off

December 2024
M	T	W	T	F	S	S
« Nov
						1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	29
30	31