Grid Tie Inverter 1000W DC10.8-30V Solar Input AC 120V MPPT Pure Sine Wave Power

Grid Tie Inverter 1000W DC10.8-30V Solar Input AC 120V MPPT Pure Sine Wave Power. Directly connected to the solar panels (do not need to connect the battery). Using precise MPPT function, APL functions, the inverter automatically adjust the solar panels of maximum output powersimply connect the solar panel to the grid inverters. Do not need to connect the battery. AC 0 angle with high precision auto-detection AC phase angle of 0 through isolation amplifier then input to the MCU for high-precision detection and analysis. The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together. Synchronous High-frequency Modulation In the process of the grid, usually adapt the same phase angle in parallel. Ie, When the two-phase alternating current total is equal to 0. Use switch to combination the two AC fusion and the product is rectified AC half-frequency AC to 100Hz first, then the machine use the high frequency current in the circuit and semi-100Hz frequency alternating current generated combination, to achieve high-frequency modulation. Pure Sine Wave Output Use SPWM directly to make pure sine wave output. Automatic Sensing Function Solar Luminosity Use the latest luminosity perception operation technology. The different illuminate angle and intensity of the solar panel will produce different current output. Use advanced CPU to operate the different illuminance and the data can be directly displayed on the LCD. Then you can visually see the sense of the strength of the sun unit. Power Automatically Locked (APL) In different current fluctuations, we should use the MPPT function. When the MPPT function adjusted to the maximum power point, the product automatically powers locked in maximum power point, then made the output power more stable. Maximum Power Point Tracking (MPPT) Because the current intensity and the voltage changes at any time, if there is no power point tracking, there will be a lot of problems. In the past time, usually adopt a solar controller, but this product uses high-precision MPPT operation power, automatic and immediate adjust the solar panels output power at the maximum output point, then achieve a stable output purposes. Automatically Adapt To Different Load Power Factor Adapt to any of the power load. Constant Current, Constant Power This product is constant current, constant output power, without any overload, over-current phenomenon. Automatically Shut Down When The Power Output Of a Fault When the city power system is in failure, the inverter will automatically turn off the output. Current Limit Protection:Current limit 12. Stack Multiple Machines 13. Multiple small power inverters in parallel can achieve large output power. High-Frequency High Conversion Rate:Adapt high frequency converter, the output more efficient. Recommend Solar Panels: 1150w in total. DC max input power: 1100w. Vmp: 18-21V, Voc: 20-24V. Packing Size: 3116.55.5cm. Packing weight: 2.6kgs. Packing: 1x grid tie inverter 1000w, 1x power cord, 1x manual. How to Install the grid tie inverter? HOW to Stackable the grid tie inverter? If you have higher power use requirements, this product can be stacked, such as: 2 grid tie inverter 1000W of stack used is equal to 2000W, 4pcs to have the 40000w. And there is No Quantitative Restrictions. Please be noted, This grid tie inverter cannot be used as off grid/stand alone solar system. The output need to be connected to the grid power. Can not supply power directly to the AC loads. DO NOT use solar controller load ports to connect to the inverter. DO NOT use the battery as the input power. My goal is to make sure you are happy and having the pleasant shopping with us. Yueqing Reliable Electric Is a leading company in the development, manufacturing and marketing of advanced power inverter and systems for mobile power markets and PV industry since 2009. The company’s power inverters convert and control raw electrical power from any renewable or back up ower source into high quality pure sine wave power. Our product range from off grid high frequency pure sine wave inverter (150W to 8000W) and grid tie inverter (200W to 2000W). Most of them are hot products in the market such as. High frequency pure sine wave inverter up to 8000w with stable performance, with LED and LCD display; 2. High advanced LCD display 2000w grid tie inverter with 45-90vdc input. Build-in dump load for small grid PV system 3. The highly compact designed micro inverter for 0.82kgs with power line carrier-current communication, it can built up a megawatt solar power station. Our pure sine wave inverters meet the needs of a wide range of application such as for vehicle, marine, train or any mobile power station. The special DC volt 36V, 72V, 96V, 110VDC ect can be selected for special application. The pure sine wave inverter products are certified to EMC testing in Australia and CE FCC, RoHS, approved. Reliable Electric is identified as one of the most famous trademarks in China for pure sine wave inverter for its relaible power inverter, reasonable price and responsible service. Reliable electric is committed to improving the environment and the renewable energy industry and continues to develop more efficient and cost-effective solutions to bring more green electricity to our lives. Any questions will be replied within 24 hours except the weekend and statuary holiday in Chinese Beijing Time. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “reliablepower” and is located in this country: CN. This item can be shipped worldwide.

Current Rating: 1-5 A
Model: Grid Tie Power Inverter
Country/Region of Manufacture: China
Wattage: 900-999 W
Current Type: AC/DC
System Configuration: Grid-Tie
Power Source: Solar
Type: Charger/Inverter
Color: Silver
MPN: Solar Power Inverter
Recommended Environment: Indoor
Power: 901-1000 W
Current Output: 10 A or Less
Brand: Unbranded
Application: Agriculture/Farming, Back-up Power, Electronics, Home/Garden
Charging Mode: MPPT (Maximum Power Point Tracking)
Voltage: 21-30 V

Category: grid | Comments Off

January 17

1000W Grid Tie Inverter DC22-45V to 110V Pure Sine Wave Inverter Machine

1000W Grid Tie Inverter 110V Output MPPT Pure Sine Wave Inverter Power for Solar. Creative MPPT technology, efficiency more than 99%. Parallel type design for DC input and modularization design. Small volume, distributed installation, easy for system configuration. Adopting high-frequency isolation transformer type, high efficiency. Perfect electrical protection function. Stackable and Easy to install. Grid tie inverter is a device which directly converts direct current into alternating current which. Sine wave, frequency and phase. Are same as power grid and then feed into utility grid. It is a key. Device of power generation systems such as PV power generation system. Smart Microinverter specially optimized design to work with modularization of DC power supplies which includes the mainstream solar modules, 24V (60 cells) and. 36V (72 cells) monocrystal and/or Polycrystalline solar panels. Smart Microinverters are stabilization, reliable and high conversion efficiency items. It is best choice for PV. Smart Microinverter can be easily placed and attached to the rack underneath of PV module. Need spaces for independent installation and low voltage DC wire connects from the PV module to. Smart Microinverter can eliminate the risk of high DC voltage. Philosophy for Smart Microinverterl insures the productiveness of the whole system and will not. Affect by a single point of failure. Each Smart Microinverter is individually connected to one PV. Module in the array. Each PV module has the individual Maximum Peak Power Point Tracker. Control and insures the maximum power is exported to the utility grid regardless of the. Performance of the other PV modules in the array. When PV modules in the array under non-ideal. Conditions in practical applications such as PV modules are affected by shading, soiling. Orientation, or mismatch, Smart Microinverter insures top performance for maximizes energy. Production from the whole PV system and gets return on investment in less time. Advantages of Smart Microinverter. Unique circuit design, choice of import industrial electronic components, higher efficiency, more. Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more. Parallel type design for DC input and modularization design for inverter, small volume, distributed. Installation, easy for system configuration, flexible for combination, strong expansibility of system. Adopting high-frequency isolation transformer type, high efficiency, and high security. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion. Getting electronic circuit design, appearance design and other core technology patents. What’s In Box. 1 x 1000W Grid Tie Inverter. 1 x User’s Manaul. 1 x AC US Cord. What’s In Box 1 x 1000W Grid Tie Inverter 1 x User’s Manaul 1 x AC US Cord. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “itrue2019″ and is located in this country: CN. This item can be shipped worldwide.

Brand: Unbranded
Rated Power: 1000W
DC Input Range: 20V-45V
AC Output: 110V(90-140V)
THD: <5%
Stand-by Power: ＜1W
Voltage: 24-36V
Solar Panels: 60/72 cells ; 30V/36V
MPPT Voltage: 26-36VDC
Frequency: 48Hz-62Hz
Power Factor: >97.5%
Certification: CE RoHS
UPC: 744370740967

Category: 1000w | Comments Off

January 16

1000w Grid Tie Inverter Stackable Mppt Pure Sine Wave Dc1528v Solar Input Ac9014

Y&H 1000W Grid Tie Inverter Stackable MPPT Pure Sine Wave DC15-28V Solar Input AC90-140V Output for 12V Solar Panel. Grid Tie Inverter MPPT Range 15.5-23V? DO use solar controller load ports to connect to the inverter. This is On Grid. The AC output needs to be connected to the grid. Vmp(of a solar panel) must be in the MPPT range to ensure the good output efficiency? Red / green lights flash alternating. This is the solar panel power or voltage is too low? 200W-1000W Solar Panel:Vmp: 18-21V, Voc: 20-24V? Please do use other voltage input, for example: (10.8V-15V)and (25-30V)? The DC positive and negative connections are reversed, and the inverter Led will light up. Micro Grid Tie Inverter Doesn’t work with 12V battery? Each time you move the inverter, tighten the DC connection terminals. Avoid short circuit of DC terminal due to loose connection? Micro Inverter Max Power Point Tracking and Stackable, Island Protection. If the DC connection is loose and causes a short circuit, then smoke may be emitted. The inverter adopts aluminum alloy casing, so there is no fire. 1000W Grid tie inverter, Pure Sine Wave Inverter DC10.8V-30V to AC90-140V Output. 18V Solar Panel, Vmp: 18-21V, Voc: 20-24V Please be noted, This grid tie inverter cannot be used as off grid/stand alone solar system. The output need to be connected to the grid power. Can supply power directly to the AC loads. 1000W Grid Tie inverter is a compact unit, which directly converts direct current into alternating current for powering appliances and/or office equipments and connecting to utility grid. The AC output from Smart Micro inverter is synchronized and in-phase with the utility grid. Here is the reason. This unit was ideally designed for a 18V solar panel If using 12v battery as input, the inverter will reach it’s max power point. We will suggest using 24v battery as input source to get a better output power. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “idea-for-you” and is located in this country: US. This item can be shipped worldwide.

Color: Silver
Size: for 12V Solar Panel Voc20-24V
Brand: Y&H
UPC: 602430651960
ISBN: 0602430651960

Category: 1000w | Comments Off

January 15

1000W Wind Power Grid-tie Inverter For DC22V-90V AC110V or AC220V SUN series

Welcome to visit PowMr. Introduction of Sunshine Grid Tie Inverter for Wind Turbine. Sunshine Grid Tie Power Inverter is the world’ s most technologically advanced inverter for use in utility-interactive applications. This manual details the safe installation and opera-tion of the Sunshine Grid Tie Inverter. This integrated system maximizes energy harvest, increases system reliability, and implifies design, installation and management. The small type wind grid tie power inverter can obtain the wind energy from wind turbine, and can tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. We call the system combining with small grid tie inverter and wind turbine as’SGWT’. The system includes wind turbine and small grid tie inverter and installation kit, and some “SGWT” also will include controller, dump load resistor. The inverter can be connected to any outlets of utility grid at house. The small grid tie inverter monitors the volume, frequency and phase of the home utility grid, then produce pure sine wave AC power that the frequency and phase are as same as the grid’s, and the volume is a bit higher than the grid’s, then according to the current controlled PWM, to control the output power to the grid. The small grid tie inverter just puts out power when the home grid is on. When the wind turbine is rotating, and the output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produces power, and the grid tie inverter will change the power from wind turbine to the home grid. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these power from the inverters will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid. Advantage of the 2G grid tie inverter? The 2nd Generation grid tie inverter, new technical, Higher efficiency. Higher MPPT efficiency, Max 99%. Multiple intelligent protection to ensure safe use. Easy to install and easy to operate. UL1741, IEEE1547, VDE4105 standards. Power Limiter function, Battery discharge function support. Pure sine wave form output, THD. Installing Sunshine Grid Tie Power System involves several key steps: 1. Considering the total capacity of the grid tie power system that you need. Choosing applicable wind turbine for Sunshine Grid Tie Inverter. Selecting accessory for installation of the Grid Tie Power System. Selecting correct model of Sunshine Grid Tie Inverter. Installing wind turbine to suitable place. Installing Sunshine Grid Tie Inverter to suitable place. Connecting Sunshine Grid Tie Power System with cables and connectors. If the input of your Inverter is. 2265V, power is 1000W, please choose: R=3? 45-90V, power is 1000W or 2000W, please choose: R=10? Installing Sunshine Grid Tie Power System to Three Phases Utility Grid. Connecting every system unit to different phase, this can balance all grid tie power to three phases of the utility grid. Fllow this way, you can install more large grid tie power system to three phases, just seperate the whole power system to three equal power system units. Layout of Sunshine Grid Tie Power Inverter. Dump load resistor connection Terminal. This terminals will connect to the dump load resistor. AC socket, This socket will connect the inverter to the public grid via the AC cable. This terminals will connect to the wind turbine. Outline Drawing of SUN Series Grid Tie Power Inverter. Dimensions (W x H x D). Limiter with 2m cable? 7-10 / 2-7 work days. 12-15 / 2-7 work days. Italy, France, Germany, Russia, Brazil, Argentina. 25-30 / 2-7 work days. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. Contact us24 hours reply. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “powmr-official” and is located in this country: CN.

Current: 1000W DC22-65V+Limiter
AC input: AC110V
Power Factor: 0.99
Output Wave Form: Pure Sine Wave
MPPT Efficiency: 99%
Over Current Protection: Yes
Over Temperature Protection: Yes
Reverse Polarity Protection: Yes
Anti-Island Protection: Yes
Stackable: Yes
Color: Blue
Brand: WIND
Country/Region of Manufacture: China
Wattage: 1000W
Power Source: Wind
Power Type: 3 Phase Wind Turbine/Generator
Display: LCD
Output Frequency: 46Hz~65Hz
Standby Power Consumption: <0.5W
Total Harmonic Distortion: <5%
Peak Inverter Efficiency: 92%
Model: SUN series
Charging Mode: MPPT (Maximum Power Point Tracking)
Features: All Daylight Conditions, Indicator Light, PC Display, Temperature Control, USB Port, Wi-Fi Port, Smart Module, LCD Display, LED Indicator, Flexible
Connector Type: MC4
Application: Home/Garden

Category: 1000w | Comments Off

January 14

1000W Grid Tie Inverter DC22-45V to AC110V Solar Pure Sine Wave Inverter Solar

Brand: Unbranded
Rated Power: 1000W
DC Input Range: 20V-45V
AC Output: 110V(90-140V)
THD: <5%
Stand-by Power: ＜1W
Voltage: 24-36V
Solar Panels: 60/72 cells ; 30V/36V
MPPT Voltage: 26-36VDC
Frequency: 48Hz-62Hz
Power Factor: >97.5%
Certification: CE RoHS
UPC: 744370740967

Category: 1000w | Comments Off

January 10

Grid Tie Inverter DC22-45V to AC110V Pure Sine Wave Inverter Compact 1000W ui

1000W Grid Tie Inverter 110V Output MPPT Pure Sine Wave Inverter Power for Solar. Creative MPPT technology, efficiency more than 99%. Parallel type design for DC input and modularization design. Small volume, distributed installation, easy for system configuration. Adopting high-frequency isolation transformer type, high efficiency. Perfect electrical protection function. Stackable and Easy to install. Grid tie inverter is a device which directly converts direct current into alternating current which. Sine wave, frequency and phase. Are same as power grid and then feed into utility grid. It is a key. Device of power generation systems such as PV power generation system. Smart Microinverter specially optimized design to work with modularization of DC power supplies which includes the mainstream solar modules, 24V (60 cells) and. 36V (72 cells) monocrystal and/or Polycrystalline solar panels. Smart Microinverters are stabilization, reliable and high conversion efficiency items. It is best choice for PV. Smart Microinverter can be easily placed and attached to the rack underneath of PV module. Need spaces for independent installation and low voltage DC wire connects from the PV module to. Smart Microinverter can eliminate the risk of high DC voltage. Philosophy for Smart Microinverterl insures the productiveness of the whole system and will not. Affect by a single point of failure. Each Smart Microinverter is individually connected to one PV. Module in the array. Each PV module has the individual Maximum Peak Power Point Tracker. Control and insures the maximum power is exported to the utility grid regardless of the. Performance of the other PV modules in the array. When PV modules in the array under non-ideal. Conditions in practical applications such as PV modules are affected by shading, soiling. Orientation, or mismatch, Smart Microinverter insures top performance for maximizes energy. Production from the whole PV system and gets return on investment in less time. Advantages of Smart Microinverter. Unique circuit design, choice of import industrial electronic components, higher efficiency, more. Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more. Parallel type design for DC input and modularization design for inverter, small volume, distributed. Installation, easy for system configuration, flexible for combination, strong expansibility of system. Adopting high-frequency isolation transformer type, high efficiency, and high security. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion. Getting electronic circuit design, appearance design and other core technology patents. What’s In Box. 1 x 1000W Grid Tie Inverter. 1 x User’s Manaul. 1 x AC US Cord. What’s In Box 1 x 1000W Grid Tie Inverter 1 x User’s Manaul 1 x AC US Cord. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “uniquegoods_4sell” and is located in this country: CN. This item can be shipped worldwide.

Brand: Unbranded
Rated Power: 1000W
DC Input Range: 20V-45V
AC Output: 110V(90-140V)
THD: <5%
Stand-by Power: ＜1W
Voltage: 24-36V
Solar Panels: 60/72 cells ; 30V/36V
MPPT Voltage: 26-36VDC
Frequency: 48Hz-62Hz
Power Factor: >97.5%
Certification: CE RoHS
UPC: 744370740967

Category: grid | Comments Off

January 10

1000W Grid Tie Pure Sine Wave MPPT Solar Power Inverter 110V AC Output US Stock

1000W Grid Tie Pure Sine Wave MPPT Solar Power Inverter 110V AC Output US Stock. DC10.8V30V or DC20V45V to AC110V Output. Please be noted, This grid tie inverter cannot be used as off grid/stand alone solar system. The output need to be connected to the grid power. Can not supply power directly to the AC loads. The Solar Panels which used with this Inverter, must be same specification. Otherwise the conversion rate will be very low. Grid tie inverter is a device which directly converts direct current into alternating current which. Sine wave, frequency and phase are same as power grid and then feed into utility grid. It is a key. Device of power generation systems such as PV power generation system. Smart Microinverter specially optimized design to work with modularization of DC. Power supplies which includes the mainstream solar modules, 18V (36 cells), 24V (60 cells) and. 36V (72 cells) monocrystal and/or Polycrystalline solar panels. Microinverters are stabilization, reliable and high conversion efficiency items. It is best choice for PV. Smart Microinverter can be easily placed and attached to the rack underneath of PV module. Need spaces for independent installation and low voltage DC wire connects from the PV module to. Smart Microinverter can eliminate the risk of high DC voltage. Philosophy for Smart Microinverterl insures the productiveness of the whole system and will not. Affect by a single point of failure. Each Smart Microinverter is individually connected to one PV. Module in the array. Each PV module has the individual Maximum Peak Power Point Tracker. Control and insures the maximum power is exported to the utility grid regardless of the. Performance of the other PV modules in the array. When PV modules in the array under non-ideal. Conditions in practical applications such as PV modules are affected by shading, soiling. Orientation, or mismatch, Smart Microinverter insures top performance for maximizes energy. Production from the whole PV system and gets return on investment in less time. Advantages of Smart Microinverter. Unique circuit design, choice of import industrial electronic components, higher efficiency, more. Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more. Parallel type design for DC input and modularization design for inverter, small volume, distributed. Installation, easy for system configuration, flexible for combination, strong expansibility of system. Adopting high-frequency isolation transformer type, high efficiency, and high security. Perfect electrical protection function. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion. Getting electronic circuit design, appearance design and other core technology patents. 230V(180-260V) or 110V(90V-140V). What’s In Box. 1 x 1000W Grid Tie Inverter. 1 x User’s Manaul. 1 x AC Cord (US/AU/EU/UK). Any question will be replied within 24 hours except the weekend and statuary holiday in Chinese Beijing Time. My goal is to make sure you are happy and having the pleasant shopping with us. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “brcu8037″ and is located in this country: US. This item can be shipped to United States.

Input Voltage: 20-45V
Model: GT1000
Current Type: AC
System Configuration: Grid-Tie
Type: Charger/Inverter
Protection Properties: Black Current Protection, Discharge Protection, Low Voltage Protection, Open Circuit Protection, Overcharge Protection, Overcurrent Protection
Power: 1000W
Brand: KRXNY
Application: Home/Garden
Charging Mode: MPPT (Maximum Power Point Tracking)
Solar panel: 18V(36cells),24/30V(60cells),36V(72cells)
Wave Form: Pure Sine Wave
Frequency: 60HZ

Category: 1000w | Comments Off

January 9

1000W Solar Grid Tie Inverter Limiter DC 22-65V 45-90V AC 110V 120V 220V 230V

1000W Solar Power Grid Tie Inverter with Limiter. Easy installation, Can be paralleled on AC side. Nice LCD display various parameters including input voltage, output power, temperature, power curve, output sine wave- form etc. Can be integrated with internal limit function. Battery discharge power mode enabled, Can auto regulate depth of discharge of the battery bank. RS485 extended interface serviceable. Standard Grid Tie Inverter. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. Power Limit Function-Stop to send excess power to the grid. When the inverter is working, all excess power that is not needed by the load is then exported to the Grid. Electric meters (except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. Most of the time, more electricity is used at night. Solar panels work only during the day when there is sunlight. User can use battery instead of solar panels. The system will work the whole day. User can set the battery discharge voltage and reboot voltage. The system will work automatically. Monitor the operating status of the inverter in mobile applications. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “solarcontroller” and is located in this country: US. This item can be shipped to United States.

With Limiter: Yes
with WIFI Plug: Yes
DC input Voltage: DC 22-65V
Model: SUN1000G2
Current Type: DC
System Configuration: Grid-Tie
Type: On Grid Tie Solar Inverter
Brand: TINGEN
Application: Home/Garden
Charging Mode: MPPT (Maximum Power Point Tracking)
Voltage: DC22-65V / DC45-90V

Category: 1000w | Comments Off

January 7

1000W LCD Display Grid Tie DC 22-60 VDC Auto Switch InverterFAST FREE SHIPPING

1000W LCD Display Grid Tie DC 22-60 VDC Auto Switch Inverter. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “cscs9339″ and is located in this country: US. This item can be shipped to United States.

Current Type: DC
System Configuration: Grid-Tie
Voltage: 22-60 VDC
Features: LCD Display
Brand: Sun
MPN: L03020201005-1

Category: 1000w | Comments Off

January 6

Y&H 1000W Grid Tie Inverter Stackable MPPT Pure Sine Wave DC15-28V Solar Inpu

Brand New Y&H 1000W Grid Tie Inverter Stackable MPPT Pure Sine Wave DC15-28V Solar Input AC90-140V Output for 12V Solar Panel. Grid Tie Inverter MPPT Range 15.5-23VDO NOT use solar controller load ports to connect to the inverter. This is On Grid. The AC output needs to be connected to the grid. Vmp(of a solar panel) must be in the MPPT range to ensure the good output efficiencyRed / green lights flash alternating. This is the solar panel power or voltage is too low. 200W-1000W Solar Panel:Vmp: 18-21V, Voc: 20-24VPlease do not use other voltage input, for example: (10.8V-15V)and (25-30V)The DC positive and negative connections are reversed, and the inverter Led will not light up. Micro Grid Tie Inverter Doesn&#######x27;t work with 12V batteryEach time you move the inverter, tighten the DC connection terminals. Avoid short circuit of DC terminal due to loose connection. AC Output Power:1000W. Maximum AC Output Power:1100W. AC Output Voltage: 90V-140V. DC Input: 10.8V-30V. Frequency Range: 48Hz 62Hz. MPPT Range 15.5-23V. Solar Panel Ppower: minimum 200W, maximum 1100W. 1 x Power Cord(US). 1 x English User’s Manaul. Start DIY your solar system. Reduce your electricity bill. 1000W Grid tie inverter, Pure Sine Wave Inverter. DC10.8V-30V to AC90-140V Output. 18V Solar Panel, Vmp: 18-21V, Voc: 20-24V. 1000W Grid Tie inverter is a compact unit, which directly converts direct current into alternating current for powering appliances and/or office equipments and connecting to utility grid. The AC output from Smart Micro inverter is synchronized and in-phase with the utility grid. Please be noted, This grid tie inverter cannot be used as off grid/stand alone solar system. The output need to be connected to the grid power. Can not supply power directly to the AC loads. DO NOT use solar controller load ports to connect to the inverter. Some buyers may have concerns about the output power not reach their expectations. Here is the reason. This unit was ideally designed for a 18V solar panel If using 12v battery as input, the inverter will not reach it’s max power point. We will suggest using 24v battery as input source to get a better output power. Use a battery to power the inverter, please use a circuit breaker. How to DIY Grid Tie Inverter Solar System? 1: Please check the power of your solar panel. The power cannot be lower than 200W. 2: Please check your solar panel voltage. Open circuit voltage 20-24V (Voc). 3: Note: Please use solar panels with the. Easy to install, DC connect your solar panel (red terminals connect “+”, black terminals connect “-“). Note 1: Do not connect the positive and negative poles. The LED will not light up. Note 2: Please tighten the DC end of the inverter. Avoid loosening and short circuits. The AC cord to the inverter 3 foot outlet, then the AC cord to home 3 pin AC outlet. The switch of the home outlet must be turned on. Note 1: The local power grid must be normal. In case of power failure, the inverter will automatically stop working (island protection). Note 2: The household outlet switch must be turned on. Otherwise, the inverter cannot be synchronized to the grid. The purpose is let small power inverter become high-power inverter. In order to achieve higher power use requirements, the use of this product can be stacked, such as: 4 grid tie inverter 1000W of stack used is equal to 4000W, and the number of open stacks (No Quantitative Restrictions). Creative MPPT tech makes efficiency higher than 99%. Consider the conversion rate of solar panel is about 80%, for example, if you need 500W power output from the inverter, you need to connect it to a solar panel that 500 / 0.8 / 0.8 equals about 780W, (780w 0.8 0.8 = 500w). Islanding; Short-circuit; converse connection; Low Voltage; Over Voltage; Over temperature Protection. Intelligence Fan-on temperature >45? The inverter stopped working after 1 week. The same problem continued to occur after replacing the inverter. The DC input voltage is wrong. Too high/too low voltage damages the inverter. For example: DC10.8-30V version, you will think that 10.8-30V will make the inverter work. So ignore the voltage required by our instructions. (Solar Panel Voltage: Vmp18-21V; Voc20-24V). 10.8V/30V is not the working voltage? Why should the advertisement display DC10.8-30V? Y&H grid tie inverter is designed for solar panels. The working voltage of solar panels depends on the intensity of sunlight, which means that the panel voltage varies. There is also an increase in the voltage at the moment the solar panel starts. When you use a 12V solar panel, the working voltage of the panel is 18V-21V. But the moment of starting is to reach 24V or higher. We design 30V to buffer the instantaneous voltage at startup. When the sun is weak. The panel voltage drops from 18V to 17V, 16V, 15V… We design compatible wide voltage input in order to obtain more power output. Of course, as the panel voltage decreases, the inverter output efficiency will decrease. DC10.8-30V input, the actual starting voltage is 15.5V. The lowest tracking voltage can reach 10.8V. This is the additional power obtained. The main power acquisition is that the panel voltage is 18V-21V (when the sun is strong). For 12V Solar Panel Voc20-24V. For 24V Solar Panel Voc38-46V. AC connected to the grid. All our products are brand new and sealed. We take our reputation seriously. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “bookmarkdeals” and is located in this country: US. This item can be shipped to United States.

MPN: GTI-1000W-18V-110V-S
Brand: Y&H
Size: for 12V Solar Panel Voc20-24V
UPC: 602430651960
EAN: 0602430651960

Category: 1000w | Comments Off

December 2024
M	T	W	T	F	S	S
« Nov
						1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	29
30	31