1000W Grid Tie Inverter With Limiter Wind Turbine Generator Battery Discharge

1000W Grid Tie Inverter With Limiter Wind Turbine Generator Battery Discharge. This Grid Tie Power Inverter is the world’s most technologically advanced inverter for use in utility-interactive applications. This integrated system maximizes energy harvest, increases system reliability, and implies design, installation and management. The small type solar grid tie power inverter can obtain the solar energy from the solar panel, and can tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. Installing Sunshine Grid Tie Power System involves several key steps. Consider the total capacity of the grid tie power system that you need. Choosing applicable wind turbines for Sunshine Grid Tie Inverter. Selecting accessory for installation of the Grid Tie Power System. Selecting the correct model of Sunshine Grid Tie Inverter. Installing wind turbines to suitable places. Installing Sunshine Grid Tie Inverter to a suitable place. Connecting Sunshine Grid Tie Power System with cables and connectors. Wind Turbine’s Rated Wind Power – 1000W. Rated wind Voltage – 24VAC, 48VAC. Inverter’s DC input voltage – 22V-60VDC, 45V-90VDC. Inverter’s Output Power Factor – >0.95. Inverter’s Output MPPT Efficiency – 99%. Protection – Over Current Protection Over Temperature Protection Reverse Polarity Protection Anti-Island Protection. LCD display shows – 1. Utility grid AC voltage, waveform, frequency 2. Every day power and power generation curve, total power 3. Shows real time power, input voltage, inside temperature, date and time 4. Set the clock and date. Accessories – Dump load resistor, Limiter(sensor), WiFi(optional), Plug(EU or USA standard). Product Size – 322x196x88mm. Packing Size – 450x320x180mm. All items will be checked carefully and packaged in good condition before dispatch the product. The arrival time depends on your location. If you are satisfied with our products and services, we must be thankful to you, if you can give us feedback about our products and services. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “vijayas-6205″ and is located in this country: CN. This item can be shipped worldwide.

Color: Without Wifi Module
Input Voltage: 22V-60V
Output Voltage: 95-265V
Size: 322*195*85MM
Current Rating: Other
Inverter Technology: Battery-Based
Model: Grid Tie Inverter Wind Turbine
Country/Region of Manufacture: China
Connector Type: Other
Maximum Input Power: 1000W
Custom Bundle: No
Wattage: 1000W
Current Type: AC/DC
System Configuration: Grid-Tie
Product Line: Grid Tie Inverter
Material: Other
Maximum Input Voltage: 230V
Power Source: Wind
Type: Charger/Inverter
Features: Automatic Voltage Detection, Daylight Operation, LCD Display, LED Indicator, Wi-Fi Port
Wire Gauge: Other
Recommended Environment: Indoor/Outdoor
Item Length: Standard
Protection Properties: Discharge Protection, Lightning Protection, Low Voltage Protection, Open Circuit Protection, Overcharge Protection, Overcurrent Protection
Power: 1000W
Current Output: 8.3A@120V, 4.3A@120V
Brand: Unbranded
Application: Agriculture/Farming, Electronics
Maximum Flow Rate: Other
Charging Mode: MPPT (Maximum Power Point Tracking)
Output Frequency: 50Hz(47.5-51.5Hz);60V(59.3-60.5Hz)
Accessories: Dump load resistor, Limiter ,WiFi
MPPT Effeciency: 99%
Output: Pure Sine Wave
N.W/G.W: 4.3KGS/6KGS
Resistance Properties: Dustproof, Dust Resistant, Heat Resistant
Voltage: 24-48 V

Category: 1000w | Comments Off

May 20

Solar Grid Tie Inverter MPPT with Limiter Pure Sine Wave DC24-96V AC110/220V 1000W

1000W Battery Discharge Solar Grid Tie Inverter MPPT with Limiter Sensor Pure Sine Wave DC24V-96V AC110V/220V. 1000w Grid Tie Inverter for Solar Panels or Battery. Working well with Battery. With power acquisition meter(one acquisition meter can connect 5 inverters). Limiter sensor clamp. Woking well with sloar panels. 26V-45V (for 24V battery). 39V-62V (for 36V battery). 55V-90V (for 48V battery). 85V-130V (for 72V battery). 120V-180V(for 96V battery). Output Voltage : AC 110V/220V (optional). Built-in Auto-limit mode. Support RS-485 communication. Built-in high-precision MPPT photovoltaic mode grid-connected function. Support battery input and grid connection, battery mode power can be set. Support battery high and low voltage protection parameter setting. High and low voltage isolation safety design. Full color LCD built-in Chinese and English display, practical, intuitive. How to connect the sensor? Conect the RS485 cable of the AC power acquisition meter to the 485 port of the inverter. Plug the connection terminal of the transmitted current sensor into the port of the collector “CT-IN” (no +-). Connect the AC power supply port “AC-IN” of the collector to the same AC power supply for the load. After the connection, it will light up. In the inverter LCD, enter the “battery grid connection”, through the SET {Bat AutoLimit Grid} for Y. Connect the inverter to AC power first, then connect the battery, the inverter will automatically output the same power as the power detected by the collector. Therefore, the inverter will not have excess electricity to be sent to the grid (ie: automatic limiter function). One acquisition meter can connect 5 unit grid tie inverters. His unit be used without batteries. It can be directly connected to solar panels. What’s in Package. 1x 1000W Solar Grid Inverter. 1x Power Limiter Sensor. 1x AC cable 50cm. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “blink-max” and is located in this country: CN. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Mexico, Brazil, Australia.

Output Voltage: AC 110V
Input Voltage: DC 26-45V
Current Output: 10 A or Less
System Configuration: Grid-Tie
Maximum Input Power: 901-1000 W
Power Source: Solar
Maximum Input Voltage: 161-180 V
Size: 305*190*110mm
Color: Blue
Current Rating: 1-5 A
Brand: SOYOSOURCE
Type: Solar Grid Tie Inverter
Current Type: AC
Voltage: 110V-220 VAC
Model: GTN-1000LIM
Recommended Environment: Indoor/Outdoor
Features: LCD Display
Country/Region of Manufacture: China
Resistance Properties: Sunlight/UV Resistant
Charging Mode: MPPT (Maximum Power Point Tracking)
Application: Home/Garden
Protection Properties: Overcurrent Protection, Overload Protection, Overvoltage Protection
Power: 1000 W

Category: solar | Comments Off

May 2

1000w 12v Wind 18v Grid Tie Pure Sine Wave Mppt Solar Power Inverter Dc 10.5v30v

1000w 12v Wind 18v Grid Tie Pure Sine Wave Mppt Solar Power Inverter Dc 10.5v30v. Wide voltage input(10.5-30V DC input), suitable for 18V solar panel, 12V wind system. Highlight :MPPT Function(tracking 15-25V). Flexible application: solar/ wind/ hybrid solar wind power system in 1 phase /3 phase utility grid. Multi-protection: Island Protection, Over Temperature Protection, Over Current Protection, Reverse Polarity Protection, Stackable. DC input : 110.5V to 30V DC, Recommend multiple more than 30W (Voc) 17.5Vsolar panel In series will result in high-input voltage. 2 Wind turbine system: Rated voltage 24VDC, maximum voltage 30VDC. AC output: 110V/120V AC. LED Indicator: 1 Red LED: a Low-voltage protection (input DC voltage is less than 10.5VDC). B Over-voltage protection (Input DC voltage is greater than 28.5VDC). C Over-temperature protection (when the chassis temperature is above 75°c, d) the temperature dropped about 2-10 minutes to restart automatically after cooling. E Fault Protection (when 110VAC or 220VAC power outage or shutdown). F Islanding protection: When the electric supply stop, the inverter automatically shut down output. 2 Green LED: Green LED flashing: The inverter is adjusting power output. MPPT is in working condition. Green LED long in time: The inverter is in working condition with the maximum output power. Notes 1Please pay attention of the voltage when use the product. The voltage is from 10.5-28V, if is not these voltage the product may broken. 2Non-professionals do not disassemble. Only qualified personnel may repair this product. 3Please install inverter in the low humidity and well-ventilated place to avoid the inverter over-heating, and clear around the inflammable and explosive materials. 4When using this product, avoid children touching, playing, to avoid electric shock. 6Optimal length of the DC input line 8M or less, long cable will allow solar panels to the inverter DC voltage drop caused by wear and tear. 7Connected to a power outlet to provide AC. 8Connected solar panels, battery DC input power supply cable. Please wait for the result of cancellation. The order will be processed and completed by automatic warehouse system within 5 minutes. Sending direct message to cancel the order is not allowed for every case. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “jiraphiboont_0″ and is located in this country: US. This item can be shipped to United States.

Color: Silver
Brand: Marsrock
UPC: 674551406576
ISBN: 0674551406576

Category: 1000w | Comments Off

April 13

1000W Solar Grid Tie Inverter withPower Limiter DC45-90V Pure Sine Wave Inverter

1000W Grid Tie Inverter AC110V Used for 12V Solar Panel Pure Sine Wave Inverter. 1000W Grid Tie Inverter MPPT Stackable DC20-45V to AC110V Pure Sine Wave Inverte. 600W Grid Tie Inverter MPPT Stackable DC20-60V to AC110V Pure Sine Wave Inverter. 600W Grid Tie Pure Sine Wave Inverter 110V Used for 12V Solar Panel/24V Battery. MPPT 600W Solar Grid Tie Micro Inverter DC22-60V to AC110V for 24V/36V PV Panel. 2000W MPPT Grid Tie Inverter with Power Limiter Stackable DC45-90V to AC190-260V. 1000W MPPT Solar Grid Tie Inverter with Power Limiter Sensor DC 45-90V / 26-60V. 1000W MPPT Grid Tie Inverter DC10.8-30V to AC110V Solar Pure Sine Wave Inverter. 1000W Grid Tie Inverter DC20-45V to AC110V for 30V/36V PV Panel Solar Inverter. 1300W Grid Tie Inverter AC110V for 12V Solar Panel Pure Sine Wave Micro Inverter. 1300W Solar Grid Tie Pure Sine Wave Micro Inverter DC20-45V for 30V/36V PV Panel. 500W 600W 700W Solar Grid Tie Micro Inverter DC18-50V Pure Sine Wave Inverter CE. 300W 600W Solar Grid Tie Inverter MPPT Pure Sine Wave DC18-50V For 36V PV Panel. 600W MPPT Grid Tie Inverter 110V for 24V/36V Solar Panel Pure Sine Wave Inverter. 600W Solar Grid Tie Micro Inverter MPPT Pure Sine Wave DC11-32V In to AC110V Out. 1000W MPPT Solar Grid Tie Inverter with Power Limiter DC22-60V, AC110V/220V Auto. 2000W Solar Grid Tie Inverter with Power Limiter Sensor DC45-90V to AC190-260V. 1000W Solar Grid Tie Inverter w/Power Limiter DC45-90V Pure Sine Wave Inverter. Grid Tie Inverter DC Input 45-90V(Starting Voltage:49.5V). Grid Tie Inverter with Limiter Sensor. Delivers only the power needed by the load. Voc (solar panel) must not exceed 90V to ensure good output efficiency. Battery discharge power mode, Can auto regulate depth of discharge of the battery bank. Micro Inverter Max Power Point Tracking and AC Stackable, Anti-island protection. Intelligent LCD display various parameters. 1000W Grid Tie Inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. Smart Micro inverter is synchronized and in-phase with the utility grid. The electric apparatus in the house will use power from the inverter first. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. The 45-90V model inverter will start up at 49.5V, after starting, the voltage will drop to 45V, then inverter can work in 45-90V. Voc 60-90V solar panels in parallel is suggested. For example:Voc=36V solar panel, we suggest 2 panels in series, then connect 2 or more groups in parallel. Rated Power (Peak/Continuous): 1000W / 900W DC Input Voltage: 45V90V AC Output Voltage Range:110V/220V Auto Peak power tracking voltage: 49.582V AC Output Frequency Range: 46Hz65Hz Peak Inverter Efficiency: 92% Stackable: Just for AC Output Output Wareform: Pure sine wave. 1 x On Grid Inverter with Limiter(built-in) 1 x AC cable 1 x Internal type Limiter clamp with sensor & 2m cable 1 x English User Manual. Stackable connection:The purpose is let small power inverter become high-power inverter. Installation of GTIL With Internal Limiter. How to use the Power Limit function? Connects/clamps to one hot wire after the Main Circuit Breaker. Converts the magnetic field created by the flow of current in the wire into small AC voltage and current which is proportional to the power that passes through the wire. This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to one of the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. Limiter Setting on the LCD of the inverter. The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. Bat or solar limited current mode. This function is usable while using with battery. The setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level. MPPT function of the inverter will auto invalid when working under this setting. Set is 0.1V/step. Set is 0.1V/Step. Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods. (Only for Business Express). Feedback is very important to us. Please do not give us any bad feedback. If you can do as we say, we will be very grateful. Please give us the opportunity to resolve any problem. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “eprec-us” and is located in this country: CN. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Mexico, Brazil, Australia.

Model: Grid Tie Inverter with Limiter
Color: Blue
Recommended Environment: Indoor
Brand: Y&H
Application: Home/Garden
Inverter Technology: Microinverter
Country/Region of Manufacture: China
System Configuration: Grid-Tie
Power Source: Solar
Power: 1000W
Charging Mode: MPPT (Maximum Power Point Tracking)
AC Output Frequency Range: 46Hz~65Hz
AC Output Voltage Range: 190V~260V
DC Input Voltage: 45V~90V
Output Wareform: Pure Sine Wave
Rated Power (Peak/Continuous): 1000W / 900W
Stackable: Just for AC Output
Voltage: DC45-90V

Category: 1000w | Comments Off

April 13

Pure Sine Wave Inverter Power Circuit Diagram Grid Tie 12v 24v Dc 220v Ac 1000W

Pure Sine Wave Inverter Power Circuit Diagram Grid Tie 12v 24v Dc 220v Ac 1000W. Output Power: 500 – 1000w. Output Current: According To The Load. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “businessrobb” and is located in this country: CN. This item can be shipped worldwide.

Input Voltage: 12V
Output Voltage: 220v 50hz
Socket Type: Universal
Size: 308x135x78mm
Current Rating: 16-20 A
Inverter Technology: Battery-Based
Model: 0280102220
Country/Region of Manufacture: China
Connector Type: Amphenol (Helios H4)
Maximum Input Power: Less Than 100 W
Custom Bundle: No
Wattage: 10-19 W
Current Type: DC
Product Line: ABB Fimer
System Configuration: Grid-Tie
Material: Carbon Fiber
Maximum Input Voltage: 11-20 V
Power Source: Wind
Type: DC/AC Inverters
Features: All Daylight Conditions, Flexible
Wire Gauge: 6
Color: Multicolor
MPN: 0280102240
Recommended Environment: Indoor/Outdoor
Item Length: See Picture
Protection Properties: None
Power: Less Than 100 W
Current Output: 10 A or Less
Brand: Unbranded
Application: Aquaculture
Maximum Flow Rate: 0.5 GPM (1.9 L/min) or Less
Charging Mode: MPPT (Maximum Power Point Tracking)
Output Frequency: 50/60Hz
Output Power: 500 – 1000W
Output Type: Single
Weight: 2720g
Resistance Properties: Abrasion Resistant, Dustproof
Voltage: 11-20 V

Category: pure | Comments Off

April 9

1000W Solar Pure Sine Wave Grid Tie Micro Inverter, 22-50V Input 90-140VAC Out

Specifications: Input Voltage: 22-50VDC Output Type: Single phase AC Size: 31016555mm Output Frequency: 50Hz /60Hz Output Voltage: 90-140VAC Output Current: 4.5A Directly connect to your solar panels (do not need to connect the battery) Pure Sine Wave Output. Automatic Sensing Function Solar Luminosity. Maximum Power Point Tracking (MPPT). Constant Current, Constant Power. Automatically Shuts Down When There is a Power Output Fault. High Frequency High Conversion Rate. Our technical English/Spanish support is always here to help you! This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “cuttingedgepowerinc” and is located in this country: US. This item can be shipped worldwide.

Brand: Cutting Edge Power
UPC: 733447837396

Category: 1000w | Comments Off

April 7

Marsrock 1000W Grid Tie Inverter, 20-50V DC to AC 120V/220V Pure Sine Wave Inver

100% Satisfaction Satisfaction Guaranteed. 8.46 inches x 16.06 inches x 4.92 inches. Weight: 2.7 kg. Support for small power wind turbine using grid power. Creative MPPT tech makes efficiency higher than 99%. Reaction more sensitive and MPPT locking faster. Adopting high-frequency isolation transformer, high efficiency, and high security. Creative circuit design and imported industrial electronic components make application efficiency higher and performance more stable. Parallel modular components design (stacking use) is convenient for systems setting, flexible combination and system scalability. Two input voltage range, suitable for different solar panels. 24V or 60 cells solar panels, Vmp is 26-30V and Voc is 34-38V. 36V or 72 cells solar panels, Vmp is 35-39V and Voc is 42-46V. We offer alot of different electronics and furniture please feel free to check them up, thank you for your interest in our inventory. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. Thank you, hope you enjoy shopping with us. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help. Again thank you for shoping with us at Royalelectronics87. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “royalelectronics87″ and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.

Item Weight: 2.7 Kilograms
Efficiency: 90%
Input Voltage: 24 Volts
Output Power: 1000 Watts
UPC: 313029423492
EAN: 0313029423492

Category: marsrock | Comments Off

April 4

Solar Grid Tie Inverter MPPT with Limiter Pure Sine Wave DC24-96V AC110/220V 1000W

1000W Battery Discharge Solar Grid Tie Inverter MPPT with Limiter Sensor Pure Sine Wave DC24V-96V AC110V/220V. 1000w Grid Tie Inverter for Solar Panels or Battery. Working well with Battery. With power acquisition meter(one acquisition meter can connect 5 inverters). Limiter sensor clamp. Woking well with sloar panels. 26V-45V (for 24V battery). 39V-62V (for 36V battery). 55V-90V (for 48V battery). 85V-130V (for 72V battery). 120V-180V(for 96V battery). Output Voltage : AC 110V/220V (optional). Built-in Auto-limit mode. Support RS-485 communication. Built-in high-precision MPPT photovoltaic mode grid-connected function. Support battery input and grid connection, battery mode power can be set. Support battery high and low voltage protection parameter setting. High and low voltage isolation safety design. Full color LCD built-in Chinese and English display, practical, intuitive. How to connect the sensor? Conect the RS485 cable of the AC power acquisition meter to the 485 port of the inverter. Plug the connection terminal of the transmitted current sensor into the port of the collector “CT-IN” (no +-). Connect the AC power supply port “AC-IN” of the collector to the same AC power supply for the load. After the connection, it will light up. In the inverter LCD, enter the “battery grid connection”, through the SET {Bat AutoLimit Grid} for Y. Connect the inverter to AC power first, then connect the battery, the inverter will automatically output the same power as the power detected by the collector. Therefore, the inverter will not have excess electricity to be sent to the grid (ie: automatic limiter function). One acquisition meter can connect 5 unit grid tie inverters. His unit be used without batteries. It can be directly connected to solar panels. What’s in Package. 1x 1000W Solar Grid Inverter. 1x Power Limiter Sensor. 1x AC cable 50cm. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “outlets-plus” and is located in this country: CN. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Mexico, Australia.

Output Voltage: AC 110V
PV VOC Input Voltage: DC 55-90V
Current Output: 10 A or Less
System Configuration: Grid-Tie
Maximum Input Power: 901-1000 W
Power Source: Solar
Maximum Input Voltage: 161-180 V
Size: 305*190*110mm
Color: Blue
Current Rating: 1-5 A
Brand: SOYOSOURCE
Type: Solar Grid Tie Inverter
Current Type: AC
Voltage: 110V-220 VAC
Model: GTN-1000LIM
Recommended Environment: Indoor/Outdoor
Features: LCD Display
Country/Region of Manufacture: China
Resistance Properties: Sunlight/UV Resistant
Charging Mode: MPPT (Maximum Power Point Tracking)
Application: Home/Garden
Protection Properties: Overcurrent Protection, Overload Protection, Overvoltage Protection
Power: 1000 W

Category: solar | Comments Off

April 2

Grid Tie Power Inverter 1000W MPPT Pure Sine Wave DC10.8-30V Solar Input AC 220V

Grid Tie Power Inverter 1000W MPPT Pure Sine Wave DC10.8-30V Solar Input AC 220V. Directly connected to the solar panels (do not need to connect the battery). Using precise MPPT function, APL functions, the inverter automatically adjust the solar panels of maximum output powersimply connect the solar panel to the grid inverters. Do not need to connect the battery. AC 0 angle with high precision auto-detection AC phase angle of 0 through isolation amplifier then input to the MCU for high-precision detection and analysis. The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together. Synchronous High-frequency Modulation In the process of the grid, usually adapt the same phase angle in parallel. Ie, When the two-phase alternating current total is equal to 0. Use switch to combination the two AC fusion and the product is rectified AC half-frequency AC to 100Hz first, then the machine use the high frequency current in the circuit and semi-100Hz frequency alternating current generated combination, to achieve high-frequency modulation. Pure Sine Wave Output Use SPWM directly to make pure sine wave output. Automatic Sensing Function Solar Luminosity Use the latest luminosity perception operation technology. The different illuminate angle and intensity of the solar panel will produce different current output. Use advanced CPU to operate the different illuminance and the data can be directly displayed on the LCD. Then you can visually see the sense of the strength of the sun unit. Power Automatically Locked (APL) In different current fluctuations, we should use the MPPT function. When the MPPT function adjusted to the maximum power point, the product automatically powers locked in maximum power point, then made the output power more stable. Maximum Power Point Tracking (MPPT) Because the current intensity and the voltage changes at any time, if there is no power point tracking, there will be a lot of problems. In the past time, usually adopt a solar controller, but this product uses high-precision MPPT operation power, automatic and immediate adjust the solar panels output power at the maximum output point, then achieve a stable output purposes. Automatically Adapt To Different Load Power Factor Adapt to any of the power load. Constant Current, Constant Power This product is constant current, constant output power, without any overload, over-current phenomenon. Automatically Shut Down When The Power Output Of a Fault When the city power system is in failure, the inverter will automatically turn off the output. Current Limit Protection:Current limit 12. Stack Multiple Machines 13. Multiple small power inverters in parallel can achieve large output power. High-Frequency High Conversion Rate:Adapt high frequency converter, the output more efficient. Recommend Solar Panels: 1150w in total. DC max input power: 1100w. Vmp: 18-21V, Voc: 20-24V. Packing Size: 3116.55.5cm. Packing weight: 2.61 kgs. Packing: 1x grid tie inverter 1000w, 1x power cords, 1x manual. How to Install the grid tie inverter? HOW to Stackable the grid tie inverter? If you have higher power use requirements, this product can be stacked, such as: 2 grid tie inverter 1000W of stack used is equal to 2000W, 4pcs to have the 40000w. And there is No Quantitative Restrictions. Please be noted, This grid tie inverter cannot be used as off grid/stand alone solar system. The output need to be connected to the grid power. Can not supply power directly to the AC loads. DO NOT use solar controller load ports to connect to the inverter. DO NOT use the battery as the input power. My goal is to make sure you are happy and having the pleasant shopping with us. Yueqing Reliable Electric Is a leading company in the development, manufacturing and marketing of advanced power inverter and systems for mobile power markets and PV industry since 2009. The company’s power inverters convert and control raw electrical power from any renewable or back up ower source into high quality pure sine wave power. Our product range from off grid high frequency pure sine wave inverter (150W to 8000W) and grid tie inverter (200W to 2000W). Most of them are hot products in the market such as. High frequency pure sine wave inverter up to 8000w with stable performance, with LED and LCD display; 2. High advanced LCD display 2000w grid tie inverter with 45-90vdc input. Build-in dump load for small grid PV system 3. The highly compact designed micro inverter for 0.82kgs with power line carrier-current communication, it can built up a megawatt solar power station. Our pure sine wave inverters meet the needs of a wide range of application such as for vehicle, marine, train or any mobile power station. The special DC volt 36V, 72V, 96V, 110VDC ect can be selected for special application. The pure sine wave inverter products are certified to EMC testing in Australia and CE FCC, RoHS, approved. Reliable Electric is identified as one of the most famous trademarks in China for pure sine wave inverter for its relaible power inverter, reasonable price and responsible service. Reliable electric is committed to improving the environment and the renewable energy industry and continues to develop more efficient and cost-effective solutions to bring more green electricity to our lives. Any questions will be replied within 24 hours except the weekend and statuary holiday in Chinese Beijing Time. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “reliablepower” and is located in this country: CN. This item can be shipped worldwide.

Current Rating: 1-5 A
Model: Grid Tie Power Inverter
Country/Region of Manufacture: China
Wattage: 900-999 W
Current Type: AC/DC
System Configuration: Grid-Tie
Power Source: Solar
Type: Charger/Inverter
Color: Silver
MPN: Solar Power Inverter
Recommended Environment: Indoor
Power: 901-1000 W
Current Output: 10 A or Less
Brand: Unbranded
Application: Agriculture/Farming, Back-up Power, Electronics, Home/Garden
Charging Mode: MPPT (Maximum Power Point Tracking)
Voltage: 21-30 V

Category: grid | Comments Off

March 27

1000W Grid Tie Inverter 110V Output MPPT Pure Sine Wave Inverter Power for Solar

1000W Grid Tie Inverter 110V Output MPPT Pure Sine Wave Inverter Power for Solar. Creative MPPT technology, efficiency more than 99%. Parallel type design for DC input and modularization design. Small volume, distributed installation, easy for system configuration. Adopting high-frequency isolation transformer type, high efficiency. Perfect electrical protection function. Stackable and Easy to install. Grid tie inverter is a device which directly converts direct current into alternating current which. Sine wave, frequency and phase. Are same as power grid and then feed into utility grid. It is a key. Device of power generation systems such as PV power generation system. Smart Microinverter specially optimized design to work with modularization of DC power supplies which includes the mainstream solar modules, 24V (60 cells) and. 36V (72 cells) monocrystal and/or Polycrystalline solar panels. Smart Microinverters are stabilization, reliable and high conversion efficiency items. It is best choice for PV. Smart Microinverter can be easily placed and attached to the rack underneath of PV module. Need spaces for independent installation and low voltage DC wire connects from the PV module to. Smart Microinverter can eliminate the risk of high DC voltage. Philosophy for Smart Microinverterl insures the productiveness of the whole system and will not. Affect by a single point of failure. Each Smart Microinverter is individually connected to one PV. Module in the array. Each PV module has the individual Maximum Peak Power Point Tracker. Control and insures the maximum power is exported to the utility grid regardless of the. Performance of the other PV modules in the array. When PV modules in the array under non-ideal. Conditions in practical applications such as PV modules are affected by shading, soiling. Orientation, or mismatch, Smart Microinverter insures top performance for maximizes energy. Production from the whole PV system and gets return on investment in less time. Advantages of Smart Microinverter. Unique circuit design, choice of import industrial electronic components, higher efficiency, more. Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more. Parallel type design for DC input and modularization design for inverter, small volume, distributed. Installation, easy for system configuration, flexible for combination, strong expansibility of system. Adopting high-frequency isolation transformer type, high efficiency, and high security. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion. Getting electronic circuit design, appearance design and other core technology patents. What’s In Box. 1 x 1000W Grid Tie Inverter. 1 x User’s Manaul. 1 x AC US Cord. What’s In Box 1 x 1000W Grid Tie Inverter 1 x User’s Manaul 1 x AC US Cord. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “topone321″ and is located in this country: CN. This item can be shipped worldwide.

Brand: Unbranded
Rated Power: 1000W
DC Input Range: 20V-45V
AC Output: 110V(90-140V)
THD: <5%
Stand-by Power: ＜1W
Voltage: 24-36V
Solar Panels: 60/72 cells ; 30V/36V
MPPT Voltage: 26-36VDC
Frequency: 48Hz-62Hz
Power Factor: >97.5%
Certification: CE RoHS
UPC: 744370740967

Category: 1000w | Comments Off

December 2024
M	T	W	T	F	S	S
« Nov
						1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	29
30	31