US 1000W Grid Tie Inverter MPPT For Solar Panel Stackable Pure Sine Wave

Clothings, Shoes & Accessories. Car Parts & Accessories. Bussiness & Industrial Electrical. US 1000W Grid Tie Inverter MPPT For Solar Panel Stackable Pure Sine Wave. Grid tie inverter is a device which directly converts direct current into alternating current which sine wave, frequency and phase are same as power grid and then feed into utility grid. It is a key device of power generation systems such as PV power generation system, wind turbine power generation system. Smart Microinverter specially optimized design to work with modularization of DC power supplies which includes the mainstream solar modules, 18V (36 cells), 24V (60 cells) and 36V (72 cells) monocrystal and/or Polycrystalline solar panels, wind turbines and batteries. Smart Microinverters are stabilization, reliable and high conversion efficiency items. It is best choice for PV power generation systems. Smart Microinverter can be easily placed and attached to the rack underneath of PV module. No need spaces for independent installation and low voltage DC wire connects from the PV module to Smart Microinverter can eliminate the risk of high DC voltage. Distributed modularization design philosophy for Smart Microinverterl insures the productiveness of the whole system and will not affect by a single point of failure. Each Smart Microinverter is individually connected to one PV module in the array. Each PV module has the individual Maximum Peak Power Point Tracke (MPPT) control and insures the maximum power is exported to the utility grid regardless of the performance of the other PV modules in the array. When PV modules in the array under non-ideal conditions in practical applications such as PV modules are affected by shading, soiling, orientation, or mismatch, Smart Microinverter insures top performance for maximizes energy production from the whole PV system and gets return on investment in less time. Unique circuit design, choice of import industrial electronic components, higher efficiency, more stable performance. Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more reliable. Parallel type design for DC input and modularization design for inverter, small volume, distributed installation, easy for system configuration, flexible for combination, strong expansibility of system. Adopting high-frequency isolation transformer type, high efficiency, and high security. Perfect electrical protection function. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion. Getting electronic circuit design, appearance design and other core technology patents. 10.5-30V VersionRated Power:1000W. DC Input Range:10.5-30V. MPPT Voltage:30.2VDC. Power Factor: More 97.5%. Stand-by Power:Less 2W. Product Size:31×16.5×5.5cm. Package Content: 1 x 1000W Grid Tie Inverter 1 x User’s Manaul 1 x US AC Cord. 1 x 1000W Grid Tie Inverter 1 x US AC Cord. We are continually expanding our product selection to better serve your needs. We look forward to providing the best sevice to you – our dear customers, so take a look around our store and find the product that you want. You can put your trust in us! We are not responsible for any loss in transit if a wrong address is provided. We strive to provide 5 STAR Feedback! If you think we are lacking in any important feedback categories, please be sure to tell us, so we have an opportunity to improve our performance. The item “US 1000W Grid Tie Inverter MPPT For Solar Panel Stackable Pure Sine Wave” is in sale since Thursday, March 23, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “ausluna0001″ and is located in United States. This item can be shipped to United States.

Manufacturer Part Number: a17011100ux0006
Main Color: Sliver,Black
Brand: Unbranded/Generic
Net Weight: 2.1kg
Country of Manufacture: CHINA
Package Content: 1 x 1000W Grid Tie Inverter 1 x US AC Cord
Material: Plastic,Metal
ItemPackageQuantity: 1
Product Size: 31×16.5×5.5cm
MPN: a17011100ux0006

Category: 1000w | Comments Off

April 10

1000W Grid Tie Solar Inverter Pure Sine Wave For 18V 36V Panel To 110V 220V MPPT

Unique circuit design, choice of import industrial electronic components, higher efficiency, more stable performance. Efficiency more than 99%, faster and more sensitive reaction, more reliable. Parallel type design for DC input and modularization design for inverter, small volume, distributed installation easy for system configuration, flexible for combination, strong expansibility of system. Adopting high-frequency isolation transformer type, high efficiency, and high security. Perfect electrical protection function. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion. Getting electronic circuit design, apperance design and other core technology Patents. Smart Grid Tie inverter is a co:pact unit, which directly converts direct current into alternating current for powering appliances and/or office equipments and connecting to utility grid. Smart Micro inverter specially optimized design to work with modularization of DC power supplies which includes the mainstream solar modules. 18V(36cells), 24V(60 cells) and 36V (72cells). Moncrystal and/or polycrystalline solar panels and batteries. Distributed modularization design philosophy for smart micro inverter insures the productiveness of the whole system and will not affect by a single point of failure. Each Smart Micro inverter is individually connected to each PV module in the array. This unique configuation means that an individual Maximum Peak Power Point Tracker(MPPT) controls each PV modules in the array which may be affected by shading, soiling, orientation or mismatch, etc. Smart Micro inverter insures top performance for maximizing energy production from the whole PV system and gets return on investment in less time. The item “1000W Grid Tie Solar Inverter Pure Sine Wave For 18V 36V Panel To 110V 220V MPPT” is in sale since Sunday, January 01, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “solarregulator” and is located in Shenzhen. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

Brand: Y-SOLAR
Model: 1000W 18V/36V Solar Inverter
MPN: 603338691577
Country/Region of Manufacture: China
Certification: CE ROHS
Type: Pure sine wave inverter
Function: With MPPT
Solar Panel: 18V30V/36V 36/60/72cells panel
Frequency: 50Hz/60Hz(Auto control)
Input: DC 10.8-28V/ 20-45V

Category: 1000w | Comments Off

March 23

1000W LCD Solar Grid Tie Inverter MPPT Pure Sine Wave Built-in Limiter Optional

1000W LCD Solar Grid Tie inverter With built-in power limiter optional MPPT pure sine wave. DC 22-65V or 45. 90V to AC 110V/ 230V Auto work. New developed grid tie inverter(second generation) with different design structure, enable better and stable operation quality. Waveform and better PF Value. 1000G2-LCD—————1000W Grid tie inverter can not work with power limiter. 1000GTIL2-LCD———-1000W grid tie inverter with internal and external limiter function. The inverter is integrated with internal limiter and external limiter function which can prevent excess power from going to the public grid. Select the internal limiter. Mode, inverter will work under limiter mode, output power of the inverter will be determined by load power. 22-65V/45-90vdc (Latest updated 22-65V). Max input DC voltage. Peak power tracking voltage. 47.5-51.5 for 50hz; 59.3-60.5 for 60hz. Just for AC output. 20’C — +85’C. Great LCD show various parameters. AC Output Current Waveform and PF Test Of 2000W Model. Tested 2000W model at nearly full load, Output current waveform shows good pure sine wave in. Oscilloscope, PF value also shows in good result, 99.8% PF value. The item “1000W LCD Solar Grid Tie Inverter MPPT Pure Sine Wave Built-in Limiter Optional” is in sale since Tuesday, November 22, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “zcsolar2016″ and is located in , . This item can be shipped worldwide.

Brand: Tricropower
MPN: Does Not Apply
Country/Region of Manufacture: China

Category: 1000w | Comments Off

March 3

1000W Micro Grid Tie Inverter With MPPT Stackable For Grid Tie Solar System

Micro Grid Tie Inverter For Solar System With MPPT Function 1000W. How to choose the Grid Tie Inverter? Just need to know the max output voltage of your solar panel and your solar cells. This inverter is compatible with 18V 36cells solar panel. And also if you are connecting a 24v battery, it’s also ok. There are four plug types for different country, please leave message what plug you need. Directly connected to the solar panels or any applicable DC power (including battery). MPPT using precise function, APL functions, solar panels automatically adjust to maximum output power, simply connect directly to the solar panel grid inverters, do not need to connect the battery. AC 0 angle with high precision auto-detection AC phase angle of 0 through isolation amplifier and input to the MCU for high-precision detection and analysis, the phase shift rate of only <1%, thus achieving high-precision AC and combining with the phase modulated output. Synchronous High-frequencyModulation In the course of the grid, usually with the same phase angle and the net (ie, two-phase alternating current total is equal to 0, with the switch to the two AC fusion) and the product is first rectified AC half-frequency AC to 100Hz, Then the machine produces high frequency current in the circuit and semi-100Hz frequency alternating current generated combination, to achieve high-frequency modulation. Pure SineWave Output Spwm is pure sine wave output directly. Power Automatically Locked (APL) The current strength of the different fluctuations, we should use the MPPT function, when the MPPT function adjusted to the maximum power point, the product automatically powers locked in maximum power point, the output power is more stable. Maximum Power Point Tracking (MPPT) Current intensity, voltage constantly changes, if there is no power point tracking, then there will be a lot of problems in the past usually adopted a solar controller, this product uses high-precision MPPT computing power, automatic and immediate to solar panels output power adjustment in the maximum output point, in order to achieve a stable output purposes 7. Automatically Adapt To Different Load Power Adapt to any of the power load. Constant Current, Constant Power, current-limited protection This product is constant current, constant output power, without any overload, over-current phenomenon. Automatically Shut DownWhen The Power Output Of Fault When the city power system planning power outage there is a failure, the inverter will automatically turn off the output. Current Limit Protection This product is constant current, constant output power, without any overload, over-current phenomenon. StackMultipleMachines (in the parallel machine used) Multiple machines in parallel can be used to achieve a small power inverter in parallel for the power output. High-Frequency High Conversion Rate Higher frequency converter, the more output efficient. Suitable for 36 cells solar panel which Vmp is 17-18V and Voc is 21-22V. 120VAC(90-140VAC) or 230VAC(190-260VAC). EN61000-6-3:2007 EN61000-6-1:2007. 31 x 16.5 x 5.3CM. Inner Box (L x W x H). 31 x 16.5 x5.3CM. Carton(L x W x H). We hold some items in our overseas warehouse, so please pay attention to the "item location" on the listing page, we will send the unit from where the item located. Of receiving a defective product. If you are dissatisfied for any reason, please donot be quick to leave negative/neutral feedback. The item "1000W Micro Grid Tie Inverter With MPPT Stackable For Grid Tie Solar System" is in sale since Thursday, November 19, 2015. This item is in the category "Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters". The seller is "voosales" and is located in Shenzhen. This item can be shipped worldwide.

Brand: VooSales
MPN: Does not apply
Country/Region of Manufacture: China
Country of Manufacture: China
Input Voltage: 10.8-30V
Output: 110V or 220V
Support Solar Panel: 18V (Vmp 18V, Voc 21V)
UPC: Does not apply

Category: 1000w | Comments Off

February 20

1000W Wind Power Grid Tie Inverter DC/AC 22V-60V 45-90V 3 Phase windmill turbine

For new energy products , we are more professional. NEW 1000W Wind Power Grid Tie Inverter. With dump load controller and resistor. -Max Efficiency:>92% MPPT Efficiency:99%. -AC 100V 110V 120V 220V 230V 240V 50hz 60hz. Low cost and easy installation. Directly connect to three phase wind turbine. Much better output waveform compare with similiar GTI. Improving the efficiency of the entire solar power system. Overload protection , Anti-island protection. Short-circuit protection/Reverse polarity protection. AC output voltage and current THD<5%, PF>99%. Build in dump load function. Introduction of Sunshine Grid Tie Inverter for Wind Turbine. The Wind Grid Tie Power Inverter is the worlds most technologically advanced inverter for use in utility-interactive applications. This manual details the safe installation and operation of the The Wind Grid Tie Inverter. This integrated system maximizes energy harvest, increases system reliability, and implifies design, installation and management. The small type wind grid tie power inverter can obtain the wind energy from wind turbine, and can tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. We call the system combining with small grid tie inverter and wind turbine as SGWT. The system includes wind turbine and small grid tie inverter and installation kit, and some SGWT also will include controller, dump load resistor. The inverter can be connected to any outlets of utility grid at house. The small grid tie inverter monitors the volume, frequency and phase of the home utility grid, then produce pure sine wave AC power that the frequency and phase are as same as the grid’s, and the volume is a bit higher than the grid’s, then according to the current controlled PWM, to control the output. Power to the grid. The small grid tie inverter just puts out power when the home grid is on. When the wind turbine is rotating, and the output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produces power, and the grid tie inverter will change the power from wind turbine to the home grid. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these. Power from the inverters will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid. Input Voltage Range:22-60vdc/45-90vdc (test point is at the output of the inside rectifier) , Peak power tracking voltage:25-60v/50-90v , Max output power:1000w , Nominal Voltage Range: 95-140v/185-265v , Max Efficiency:>92% , MPPT Efficiency:99%. Input AC/DC Voltage Range. AC Output Voltage Range. Dimensions (W x H x D). 322 x 196 x 88 mm. (1) (2) Dump load resistor connection Terminal. This terminals will connect to the dump load resistor. (3) AC socket, This socket will connect the inverter to the public grid via the AC cable. This terminals will connect to the wind turbine. Wind power grid tie inverter —- 1pcs , 2. Dump load resistor —1pcs , 3. AC cable –1pcs , 4. Wind Power Grid Tie Inverters List. 3 phase wind turbine. Wind Grid Tie Inverter Installation. Considering the total capacity of the grid tie power system that you need. The total capacity of the whole grid tie power system is according to your power consumption in the site that you want to install, or how much power that you want it to feed to the utility grid. Actually, the volume is just according to your willingness, because when the total power of electric appliances that are being used in the installation site is larger than the output power of the grid tie power system, these power from the system will be consumed in the site, this will slow down the power meter, otherwise, the difference of the output power from the system between the total used power of the appliances will feed to the utility grid. For example, if you want to install a grid tie power system in your house, you could decide the total power volume according to the total power the appliances that you use in your house, maybe the consumption of total energy in per day is about 5KWH, then you should realize the averaged speed of the wind in per day at your site, check the power to the speed of the wind curve from the specifications of the wind turbine, then you can estimate the average power that the wind turbine can generate, actually the real average power the wind turbine can generate at your side is not easy to estimate, you need to check the history data of the climate, because it will vary every day according to the climate, just assume a 1KW rated wind turbine is suitable for the grid tie power system that you plan to set, with this capacity of the system, it can supply all power consumption in whole year. When grid tie power system is working, sometimes, there is extra power feed to utility grid if the power from the grid tie system is larger than the power consumed by the appliances in your house, and sometimes will not when it is not larger. If you use a 1KW wind turbine, then we call the GTWT system is 1KW grid tie power system, of course, you can install 500W grid tie power system or 2KW grid tie inverter, even more large capacity or more small capacity grid tie inverter, it doesnt matter. The capacity is too big, you should consider the volume of AC system of your house can hold the feeded power. Choosing applicable wind turbine for Sunshine Grid Tie Inverter. The most kinds of specifications that the factories marked about the wind turbines. 1, Starting wind speed(m/s). 2, Cut-in wind speed(m/s). 3, Rated wind speed(m/s). 6, Safe wind speed(m/s). 7, Rated DC voltage. You need to choose a wind turbine that the rated power can meet the power consumption. When you choose a wind turbine, you also need to consider ahead what. Model gird tie inverter of SUN series you want to use. Wind turbines have two output type. One is AC output type, and another is DC output type, if the wind turbine is DC output type. It must be integrated with a rectifier. So if the wind turbine is AC output type, you should. Use WAL model of SUN series grid tie inverter, if the wind turbine is DC output type, then. You should use WDL model of SUN series grid tie inverter. Selecting accessory for installation of the Grid Tie Power System. The accessory for grid tie power system including. 1, Connecting cables will be connected with wind turbine and inverters. 4, Power meter(Optional). 5, Bracket for wind turbine installation(not included in this user manual). Selecting correct model of Sunshine Grid Tie Inverter. When finished step1 to step3, then you can select a correct model of SUN series inverter. If the wind turbine is DC output type, then you should choose WDL model inverters, and. The input DC voltage range of the inverter should fit the DC output voltage of the wind. Turbine, the rated power of the inverter should also fit the max. Power of the wind turbine. And the AC output of the inverter should fit the standard of AC utility grid. If the wind turbine is AC output type, then you should choose WAL model inverters. Factories dont supply the AC rated voltage, just supply DC rated voltage, so our WAL also. Supply the DC input range, please check the DC rated voltage of wind turbine should fit. The DC input range of the grid tie inverter. Installing wind turbine to suitable place. Installing the wind turbine of the SGWT to suitable location where the wind is strong enough. To drive the wind turbine. Warning: Please read the user manual of wind turbine before you install the wind. Turbine, dont install the wind turbine under high wind. Warning: Ensure using strong braket to fix the wind turbine to avoid the danger under. Warning: The blades of the wind turbine should be taken down before the hurricane is. Installing Sunshine Grid Tie Inverter to suitable place. Place the Grid Tie Inverter on a surface protected from direct sunlight, high. The inverter requires at least 150mm of clearance around itself for. The inverters are for indoor use, cant use at outdoor. You can use screws to fix. The inverter to the surface, because some models of Sunshine grid tie inverter have fans on. The bottom cover, so the surface should be flat. Connecting Sunshine Grid Tie Power System with cables and connectors. Connecting the Grid Tie Power System with Cables and Connectors. After finished from Step1 to Step6, you should connect the wind turbine and inverter with cables. And connectors to integrate the Sunshine Grid Tie System. Connect the ground terminal of the wind turbine to the NEC approved AC grounding electrode. Connect the grid tie inverters to the grounded racking using a grounding washer approved for the. The ground wire of the AC cables is connnected to the housing of inverter when the AC. Cables is connected to the inverters, so when the AC plug is inserted to the socket of AC outlet of. Utility grid in the house, the ground pin of the socket must be connected to the Earth ground. Connecting the wind turbine output cables after complete from Step1 to Step8. Warning: Before connect the wind turbine output cables to grid tie inverter, you should stop. The the rotating of the wind turbine just in order to avoid the sparkle when connect the cables. WAL model of grid tie invereter connected with AC output type of wind turbine. Connecting two 1000G2-WAL with a max. Power is 2KW wind turbine. The Inverter display can show many information, The main interface of the display and the icons explainations are show above. The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid. Select the internal limiter mode, inverter will work under limiter mode, output power of the inverter will be determined by load power. Select the external limiter mode, inverter need a external limiter module working with it. For more details about the limiter function, pls contact supplier. This function only useful with limiter type inverter. Notes: Save the setting after you reconfigurate the working mode or backlight setting. Notes: Battery Discharge Current Mode And Battery Discharge Power Mode are not developed yet. This interface will show the real time grid waveform. The grid voltage and frequency also will show in this interface. The energy interface will show the power generation curve everyday. Today KWH and Total KWH are also show in this page. In this interface, the display shows real time power, PV input voltage, inside temperature, date and time. Clock And Date Setting. Set the clock and date in this page, save the setting before exit. AC Output Current Waveform and PF Test Of 2000W Model. Tested 2000W model at nearly full load, Output current waveform shows good pure sine wave in oscilloscope, PF value also shows in good result, 99.8% PF value. 14 days no reason to return. Why to choose GAIA grid tie Inverters? Advanced patented technology, MPPT efficiency is higher. High-quality imported components, more stable quality, lower failure rate. Significantly longer life, more than 10 years. Each inverter need to pass twice testing (16 hours) before leaving factory. Combination of SGPV does not interact. CE ROHS SGS Certification. Please do not choose a cheap power inverter. Low-cost power inverter use low-quality components, low efficiency, poor stability. Poor quality power inverter might damage the appliances, and even cause fires and explosions. GAIA NEW ENERGY is your trusted partner for long term business. We arethe MANUFACUTER of the solar inverter. We are responsible forthe quality of the inverter. The inverter has 2 years guarantee. All return items must be in their original condition. Please do contact with us for return address, details and any other issues. It may not apply to countries with different tariff rules. Please leave us message if you have any question, we will reply in 24 hours, thank you! The item “1000W Wind Power Grid Tie Inverter DC/AC 22V-60V 45-90V 3 Phase windmill turbine” is in sale since Tuesday, February 14, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “new-power2010″ and is located in ShangHai. This item can be shipped worldwide.

Brand: SUN
MPN: SUN-1000G2WAL-R
Country/Region of Manufacture: China
Power Type: 3 Phase Wind Turbine/Generator
Dump Load Controller: Built-in
Dump load resistor: Included
Display: LCD
Max. Power Output: 1000w
Input AC/DC Voltage Range: 10.8v-30v/22-60V / 45-90v
AC Output Voltage Range: 95-135VAC/185-265VAC auto
Output Frequency: 46Hz~65Hz
Standby Power Consumption: <0.5W
Total Harmonic Distortion: <5%
Peak Inverter Efficiency: 92%
Power Factor: 0.99
Output Wave Form: Pure Sine Wave
MPPT Efficiency: 99%
Over Current Protection: Yes
Over Temperature Protection: Yes
Reverse Polarity Protection: Yes
Anti-Island Protection: Yes
Stackable: Yes
Weight ( Kg): 4.5kg
Dimensions (W x H x D): 322x196x88mm

Category: 1000w | Comments Off

February 11

1000W watt Solar Grid Tie Inverter DC 22V-60V TO AC 110V/120V 92% Efficiecy

1000W Grid Tie Solar Power inverter 22V-60VDC Input, 110VAC Output. Small Grid Tie Photovoltaic System (SGPV) Pure Sine Wave- Maximum Power Point Tracking function(MPPT) Peak Inverter Efficiency: 92% Stackable (connect in parallel for higher output) Island protection: Inverter will shut down during black outs. Simple and safe installation- Reverse polarity protection Constant Power Output Low distortion output on all ranges Allow different Power factor from loads LED display RoHS Compliant. Connect the Solar Panel DC supply cables to the DC input terminal of the inverter, be sure that the polarity is correct. Recommended DC input cable size for maximum output is 8AWG or cables that can handle more than 30A. Optimal length would be less than 8m, longer cables will experience higher voltage drop. Connect the supplied AC power cord to the inverter and plug it to a home wall socket. The 3 green LED indicators will start to cycle from left to right when the grid and DC supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being output from the solar panels. The more big output power is, the more fast the rate is. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, and this is called Island Protection. No need return the original one for low-valued items. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! Pleas message us if recipient address changes needed before we fulfill the order. Sorry, no local pickups available. The free listing tool. The item “1000W watt Solar Grid Tie Inverter DC 22V-60V TO AC 110V/120V 92% Efficiecy” is in sale since Tuesday, November 18, 2014. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “chargerangel” and is located in Hayward, California. This item can be shipped to United States, to Canada, to Mexico.

Type: Grid Tie Inverters
Energy Type: Solar
Brand: Mass power
MPN: Does Not Apply

Category: 1000w | Comments Off

February 4

1000W Wind Power Grid Tie Inverter with Limiter for 3 Phase windmill turbine

For new energy products , we are more professional. NEW 1000W Wind Power Grid Tie Inverter. With dump load controller and resistor. -Max Efficiency:>92% MPPT Efficiency:99%. -DC/AC 10.8V-30V / 22V-60V / 45V-90V (selected). -AC 100V 110V 120V 220V 230V 240V 50hz 60hz. Low cost and easy installation. Directly connect to three phase wind turbine. Much better output waveform compare with similiar GTI. Improving the efficiency of the entire solar power system. Overload protection , Anti-island protection. Short-circuit protection/Reverse polarity protection. AC output voltage and current THD<5%, PF>99%. Build in dump load function. Build in Limiter (internal type). Introduction of Sunshine Grid Tie Inverter for Wind Turbine. The Wind Grid Tie Power Inverter is the worlds most technologically advanced inverter for use in utility-interactive applications. This manual details the safe installation and operation of the The Wind Grid Tie Inverter. This integrated system maximizes energy harvest, increases system reliability, and implifies design, installation and management. The small type wind grid tie power inverter can obtain the wind energy from wind turbine, and can tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. We call the system combining with small grid tie inverter and wind turbine as SGWT. The system includes wind turbine and small grid tie inverter and installation kit, and some SGWT also will include controller, dump load resistor. The inverter can be connected to any outlets of utility grid at house. The small grid tie inverter monitors the volume, frequency and phase of the home utility grid, then produce pure sine wave AC power that the frequency and phase are as same as the grid’s, and the volume is a bit higher than the grid’s, then according to the current controlled PWM, to control the output. Power to the grid. The small grid tie inverter just puts out power when the home grid is on. When the wind turbine is rotating, and the output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produces power, and the grid tie inverter will change the power from wind turbine to the home grid. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these. Power from the inverters will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid. Input Voltage Range:22-60vdc/45-90vdc (test point is at the output of the inside rectifier) , Peak power tracking voltage:25-60v/50-90v , Max output power:1000w , Nominal Voltage Range: 95-140v/185-265v , Max Efficiency:>92% , MPPT Efficiency:99%. Input AC/DC Voltage Range. AC Output Voltage Range. Dimensions (W x H x D). 322 x 196 x 88 mm. Note: this is 1000w wind power grid tie inverter with limiter. Wind power grid tie inverter —- 1pcs , 2. Dump load resistor —1pcs , 3. AC cable –1pcs , 4. Limiter sensor/clamp / cable —- 1 set. Wind Grid Tie Inverter Installation. Considering the total capacity of the grid tie power system that you need. The total capacity of the whole grid tie power system is according to your power consumption in the site that you want to install, or how much power that you want it to feed to the utility grid. Actually, the volume is just according to your willingness, because when the total power of electric appliances that are being used in the installation site is larger than the output power of the grid tie power system, these power from the system will be consumed in the site, this will slow down the power meter, otherwise, the difference of the output power from the system between the total used power of the appliances will feed to the utility grid. For example, if you want to install a grid tie power system in your house, you could decide the total power volume according to the total power the appliances that you use in your house, maybe the consumption of total energy in per day is about 5KWH, then you should realize the averaged speed of the wind in per day at your site, check the power to the speed of the wind curve from the specifications of the wind turbine, then you can estimate the average power that the wind turbine can generate, actually the real average power the wind turbine can generate at your side is not easy to estimate, you need to check the history data of the climate, because it will vary every day according to the climate, just assume a 1KW rated wind turbine is suitable for the grid tie power system that you plan to set, with this capacity of the system, it can supply all power consumption in whole year. When grid tie power system is working, sometimes, there is extra power feed to utility grid if the power from the grid tie system is larger than the power consumed by the appliances in your house, and sometimes will not when it is not larger. If you use a 1KW wind turbine, then we call the GTWT system is 1KW grid tie power system, of course, you can install 500W grid tie power system or 2KW grid tie inverter, even more large capacity or more small capacity grid tie inverter, it doesnt matter. The capacity is too big, you should consider the volume of AC system of your house can hold the feeded power. Choosing applicable wind turbine for Sunshine Grid Tie Inverter. The most kinds of specifications that the factories marked about the wind turbines. 1, Starting wind speed(m/s). 2, Cut-in wind speed(m/s). 3, Rated wind speed(m/s). 6, Safe wind speed(m/s). 7, Rated DC voltage. You need to choose a wind turbine that the rated power can meet the power consumption. When you choose a wind turbine, you also need to consider ahead what. Model gird tie inverter of SUN series you want to use. Wind turbines have two output type. One is AC output type, and another is DC output type, if the wind turbine is DC output type. It must be integrated with a rectifier. So if the wind turbine is AC output type, you should. Use WAL model of SUN series grid tie inverter, if the wind turbine is DC output type, then. You should use WDL model of SUN series grid tie inverter. Selecting accessory for installation of the Grid Tie Power System. The accessory for grid tie power system including. 1, Connecting cables will be connected with wind turbine and inverters. 4, Power meter(Optional). 5, Bracket for wind turbine installation(not included in this user manual). Selecting correct model of Sunshine Grid Tie Inverter. When finished step1 to step3, then you can select a correct model of SUN series inverter. If the wind turbine is DC output type, then you should choose WDL model inverters, and. The input DC voltage range of the inverter should fit the DC output voltage of the wind. Turbine, the rated power of the inverter should also fit the max. Power of the wind turbine. And the AC output of the inverter should fit the standard of AC utility grid. If the wind turbine is AC output type, then you should choose WAL model inverters. Factories dont supply the AC rated voltage, just supply DC rated voltage, so our WAL also. Supply the DC input range, please check the DC rated voltage of wind turbine should fit. The DC input range of the grid tie inverter. Installing wind turbine to suitable place. Installing the wind turbine of the SGWT to suitable location where the wind is strong enough. To drive the wind turbine. Warning: Please read the user manual of wind turbine before you install the wind. Turbine, dont install the wind turbine under high wind. Warning: Ensure using strong braket to fix the wind turbine to avoid the danger under. Warning: The blades of the wind turbine should be taken down before the hurricane is. Installing Sunshine Grid Tie Inverter to suitable place. Place the Grid Tie Inverter on a surface protected from direct sunlight, high. The inverter requires at least 150mm of clearance around itself for. The inverters are for indoor use, cant use at outdoor. You can use screws to fix. The inverter to the surface, because some models of Sunshine grid tie inverter have fans on. The bottom cover, so the surface should be flat. Connecting Sunshine Grid Tie Power System with cables and connectors. Connecting the Grid Tie Power System with Cables and Connectors. After finished from Step1 to Step6, you should connect the wind turbine and inverter with cables. And connectors to integrate the Sunshine Grid Tie System. Connect the ground terminal of the wind turbine to the NEC approved AC grounding electrode. Connect the grid tie inverters to the grounded racking using a grounding washer approved for the. The ground wire of the AC cables is connnected to the housing of inverter when the AC. Cables is connected to the inverters, so when the AC plug is inserted to the socket of AC outlet of. Utility grid in the house, the ground pin of the socket must be connected to the Earth ground. Connecting the wind turbine output cables after complete from Step1 to Step8. Warning: Before connect the wind turbine output cables to grid tie inverter, you should stop. The the rotating of the wind turbine just in order to avoid the sparkle when connect the cables. WAL model of grid tie invereter connected with AC output type of wind turbine. Connecting two 1000G2-WAL with a max. Power is 2KW wind turbine. The Inverter display can show many information, The main interface of the display and the icons explainations are show above. The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid. Select the internal limiter mode, inverter will work under limiter mode, output power of the inverter will be determined by load power. Select the external limiter mode, inverter need a external limiter module working with it. For more details about the limiter function, pls contact supplier. This function only useful with limiter type inverter. Notes: Save the setting after you reconfigurate the working mode or backlight setting. Notes: Battery Discharge Current Mode And Battery Discharge Power Mode are not developed yet. This interface will show the real time grid waveform. The grid voltage and frequency also will show in this interface. The energy interface will show the power generation curve everyday. Today KWH and Total KWH are also show in this page. In this interface, the display shows real time power, PV input voltage, inside temperature, date and time. Clock And Date Setting. Set the clock and date in this page, save the setting before exit. AC Output Current Waveform and PF Test Of 2000W Model. Tested 2000W model at nearly full load, Output current waveform shows good pure sine wave in oscilloscope, PF value also shows in good result, 99.8% PF value. GAIA NEW ENERGY is your trusted partner for long term business. We arethe MANUFACUTER of the solar inverter. We are responsible forthe quality of the inverter. The inverter has 2 years guarantee. All return items must be in their original condition. Please do contact with us for return address, details and any other issues. It may not apply to countries with different tariff rules. Please leave us message if you have any question, we will reply in 24 hours, thank you! The item “1000W Wind Power Grid Tie Inverter with Limiter for 3 Phase windmill turbine” is in sale since Friday, February 03, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “new-power2010″ and is located in ShangHai. This item can be shipped worldwide.

Brand: SUN
MPN: SUN-1000G2WAL-R
Country/Region of Manufacture: China
Power Type: 3 Phase Wind Turbine/Generator
Dump Load Controller: Built-in
Dump load resistor: Included
Display: LCD
Max. Power Output: 1000w
Input AC/DC Voltage Range: 10.8v-30v/22-60V / 45-90v
AC Output Voltage Range: 95-135VAC/185-265VAC auto
Output Frequency: 46Hz~65Hz
Standby Power Consumption: <0.5W
Total Harmonic Distortion: <5%
Peak Inverter Efficiency: 92%
Power Factor: 0.99
Output Wave Form: Pure Sine Wave
MPPT Efficiency: 99%
Over Current Protection: Yes
Over Temperature Protection: Yes
Reverse Polarity Protection: Yes
Anti-Island Protection: Yes
Stackable: Yes
Weight ( Kg): 4.5kg
Dimensions (W x H x D): 322x196x88mm
Featurer Function: Limiter

Category: 1000w | Comments Off

February 1

1000W Solar on Grid Tie Inverter, SUN POWER MPPT PV System DC 22V-60V/45V-90V

2nd Generation 1000w Solar Power Grid Tie Inverter. -2nd Gererntion Technical , higher MPPT. -DC 22V-60V or 45V-90V (Optional). -AC 110V 120V 220V 230V 240V (auto). Introduction of Sunshine Grid Tie Inverter. Sunshine Grid Tie Power Inverter is the worlds most technologically advanced inverter for use in utility-interactive applications. This manual details the safe installation and operation of the Sunshine Grid Tie Inverter. This integrated system maximizes energy harvest, increases system reliability, and implifies design, installation and management. The small type solar grid tie power inverter can obtain the solar energy from solar panel, and can tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. We call the system combining with small solar grid tie inverter and solar panels as SGPV. The system includes solar panels and small type grid tie inverter and installation kit. Solar panels can be mono silicon, polygon silicon, non-crystal film or any other material that can transform. S olar energy to electric energy. The power of grid tie inverter should be matched to the power of solar panels connected. So the power of SGPV is defined by its solar panels, it can be standardization according to the actual using. The inverter can be connected to any outlets of utility grid at house. The small grid tie inverter monitors the volume, frequency and phase of the home utility grid, then produce pure sine wave AC power that the frequency and phase are as same as the grid’s, and the volume is a bit higher than the grid’s, then according to the current controlled PWM, to control the output power to the grid. The small grid tie inverter just puts out power when the home grid is on. When the sun shines, the PV panel will produces DC voltage, and the grid tie inverter will change the DC voltage to AC voltage and puts out power to the home grid. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these power from the inverters will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid. Input DC Voltage Range. Peak power tracking voltage. AC Output Voltage Range. Dimensions (W x H x D). Note: there are 22v-60v and 45v-90v input voltage optional. Advantage of The Sunshine Grid Tie Power System. More than 1 unit inverters stackable. There are many advantages of SGPV compare with the traditional grid tie power system. Low cost and easy installation – SGPV can make full use of all types of buildings surface that face to the sun in the city as well as fast and easy installation of solar modules and grid tie inverter. It just needs very low maintenance costs. Free combination – SGPV can be used as a separate grid tie system and can be setup as a large solar array with many of them. The quantity of SGPV in the array is just according to your desire. If you are planning to install a grid-tie PV system, in a general way, the solar array and inverter need to be carefully matched to ensure that the inverters voltage and power limits are not exceeded. When you want to increase more solar panels, and if the total power of the solar panels exceeds the allocation grid inverter, it is necessary to increase the cost of a grid inverter. Combination of SGPV does not interact – The traditional solar grid tie system, they offer units ranging in high power output and these units are modular so you can have multiple units operating in parallel for large solar arrays. Although, the traditional grid inverter has MPPT feature (Maximum Power Point Tracking), but the maximum power point is according to the entire series in terms of solar panels array, if the performance of a piece of solar panels in the system, for some reason, such as leaves, bird droppings, dust, shadow, etc. And degrades, the performance of the entire solar power system will decrease. SGPV has no such disadvantage. If the performance of a piece of solar panels in the system degrades, this just effects this piece itself, will not affect other SGPV in the system. Improving the efficiency of the entire solar power system In traditional grid tie system, the solar panels are connected in series, so the MPPT of the inverter is according to the total panels in series, not to every panel, but there is difference between every panel, so not every panel is working at the maximum power, this will reduce the total power of these panel in series. But SGPV has no such disadvantage. Because every inverter of SGPV has MPPT function, so every panel is working at the maximum power, this will increase the efficiency of the entire system. Low power consumption Most of the parts in the small grid-tie inverter are digital ICs and. Low power MCU, so the power consumption of it is low, though the quantity of grid tie inverters. Is increased, but this will not increase the power consumption much of the entire system. The Inverter display can show many information, The main interface of the display and the icons explainations are show above. The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid. Select the internal limiter mode, inverter will work under limiter mode, output power of the inverter will be determined by load power. Select the external limiter mode, inverter need a external limiter module working with it. For more details about the limiter function, pls contact supplier. This function only useful with limiter type inverter. Notes: Save the setting after you reconfigurate the working mode or backlight setting. Notes: Battery Discharge Current Mode And Battery Discharge Power Mode are not developed yet. This interface will show the real time grid waveform. The grid voltage and frequency also will show in this interface. The energy interface will show the power generation curve everyday. Today KWH and Total KWH are also show in this page. In this interface, the display shows real time power, PV input voltage, inside temperature, date and time. Clock And Date Setting. Set the clock and date in this page, save the setting before exit. AC Output Current Waveform and PF Test Of 2000W Model. Tested 2000W model at nearly full load, Output current waveform shows good pure sine wave in oscilloscope, PF value also shows in good result, 99.8% PF value. Please note : this inverter is not limiter inverter. If you do not want to sell electric power , you will need a limiter type inverter. Why to choose GAIA grid tie Inverters? Advanced patented technology, MPPT efficiency is higher. High-quality imported components, more stable quality, lower failure rate. Significantly longer life, more than 10 years. Each inverter need to pass twice testing (16 hours) before leaving factory. Low cost and easy installation. Combination of SGPV does not interact. Improving the efficiency of the entire solar power system. CE ROHS SGS Certification. GAIA NEW ENERGY is your trusted partner for long term business. We arethe MANUFACUTER of the solar inverter. We are responsible forthe quality of the inverter. The inverter has 2 years guarantee. All return items must be in their original condition. Please do contact with us for return address, details and any other issues. It may not apply to countries with different tariff rules. Please leave us message if you have any question, we will reply in 24 hours, thank you! The item “1000W Solar on Grid Tie Inverter, SUN POWER MPPT PV System DC 22V-60V/45V-90V” is in sale since Monday, January 30, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “new-power2010″ and is located in ShangHai. This item can be shipped worldwide.

Brand: SUN
MPN: SUN-1000G2
Country/Region of Manufacture: China
Input Voltage: 22v-60v or 45v-90v Optional
Output Voltage: 100V 110V 120V 220V 230V 240V auto
Output Frequency: 45-65Hz
Standby Power Consumption: <0.5w
Total Harmonic Distortion: <5%
Peak Inverter Efficiency: 92%
MPPT Efficiency: 99%
Power Factor: 0.99
Output Wave Form: Pure Sine Wave
Weight: 3.6kg
Dimensions (W x H x D): 322x196x88 mm

Category: 1000w | Comments Off

January 8

1000W MPPT Solar Grid Tie Inverter Pure Sine Wave DC10.5-28V to AC110V/220V

1000W MPPT Solar Grid Tie Inverter Pure Sine Wave DC10.5-28V to AC110V/220V. DC10.5V28V to AC110V/220V Output. 1000W Grid-tie Inverter, Pure sine wave inverter. Please be noted, This grid tie inverter cannot be used as off grid/stand alone solar system. The output need to be connected to the grid power. Can not supply power directly to the AC loads. Grid tie inverter is a device which directly converts direct current into alternating current which. Sine wave, frequency and phase are same as power grid and then feed into utility grid. It is a key. Device of power generation systems such as PV power generation system, wind turbine power. Smart Microinverter specially optimized design to work with modularization of DC. Power supplies which includes the mainstream solar modules, 18V (36 cells), 24V (60 cells) and. 36V (72 cells) monocrystal and/or Polycrystalline solar panels, wind turbines and batteries. Microinverters are stabilization, reliable and high conversion efficiency items. It is best choice for PV. Smart Microinverter can be easily placed and attached to the rack underneath of PV module. Need spaces for independent installation and low voltage DC wire connects from the PV module to. Smart Microinverter can eliminate the risk of high DC voltage. Philosophy for Smart Microinverterl insures the productiveness of the whole system and will not. Affect by a single point of failure. Each Smart Microinverter is individually connected to one PV. Module in the array. Each PV module has the individual Maximum Peak Power Point Tracker. Control and insures the maximum power is exported to the utility grid regardless of the. Performance of the other PV modules in the array. When PV modules in the array under non-ideal. Conditions in practical applications such as PV modules are affected by shading, soiling. Orientation, or mismatch, Smart Microinverter insures top performance for maximizes energy. Production from the whole PV system and gets return on investment in less time. Advantages of Smart Microinverter. Unique circuit design, choice of import industrial electronic components, higher efficiency, more. Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more. Parallel type design for DC input and modularization design for inverter, small volume, distributed. Installation, easy for system configuration, flexible for combination, strong expansibility of system. Adopting high-frequency isolation transformer type, high efficiency, and high security. Perfect electrical protection function. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion. Getting electronic circuit design, appearance design and other core technology patents. 230V(180-260V) or 110V(90V-140V). The item “1000W MPPT Solar Grid Tie Inverter Pure Sine Wave DC10.5-28V to AC110V/220V” is in sale since Tuesday, January 03, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “maihuiyan” and is located in shenzhen. This item can be shipped worldwide.

Brand: Y&H
Model: Pure sine wave inverter
MPN: Does Not Apply
Country/Region of Manufacture: China
Solar panel:: 18V 36cells
Frequency range:: 50Hz/60Hz(Auto control)
DC Input:: 10.5-28V

Category: 1000w | Comments Off

December 27

1000W Watt Solar Micro Grid Tie Power Inverter for Solar Panel 10.5-28V DC

Phonetone 1000W High Power In-buillding Use Solar Grid-tie Micro Power Inverter Converter Pure Sine Wave Inverter Charger (Input 10.5 – 28V DC, Output 90-140V AC). Recommend use solar panels: 1250Wp. DC voltage range: Vpv 10.5V28V DC. AC output power: 1000W. AC standard voltage range: 90V-140V AC. AC frequency range: 55Hz63Hz. The item “1000W Watt Solar Micro Grid Tie Power Inverter for Solar Panel 10.5-28V DC” is in sale since Monday, December 26, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “edwardf860″ and is located in Farmington, Connecticut. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, ZA, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, PH, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, BR, CL, CO, CR, DO, PA, TT, GT, SV, HN, JM.

Brand: Phonetone
MPN: Does Not Apply

Incoming search terms:

MGI 500W DC10 5~28V Grid Tie Inverter for Solar Pa

Category: 1000w | Comments Off

January 2025
M	T	W	T	F	S	S
« Dec
		1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	31