Recommended using solar panels. Solar panel open circuit voltage range. Peak power tracking voltage. Maximum input operating current. Dimensions L× W × H. Reverse transfer, load priority. Red terminal: Connect DC positive, black terminal: Connect DC negative. 2 Input voltage range: 10.5V to 28V. Solar Panel: Recommend using the power more than 30W and the standard voltage of 17.5V PV panel. Recommend using multiple solar panels. Solar panel in series will result in high-input voltage which will exceed the working voltage range of the inverter. Wind turbine system: Rated voltage 24VDC, maximum voltage 28VDC. 2 Voltage range of the inverter whose output is 220V AC. 2 Voltage range of the inverter whose output is 110V AC. A:90140V (USA plug). B:180260V (Australian, British, European Union Plug OPTIONAL). 1Low-voltage protection (input DC voltage is less than 10.5VDC). 2Over-voltage protection (Input DC voltage is greater than 28.5VDC). 3Over-temperature protection when the chassis temperature is above 75. The temperature dropped about 2-10 minutes to restart automatically after cooling. 4Fault Protection (when 110VAC or 220VAC power outage or shutdown). 5Islanding protection: When the electric supply stop, the inverter automatically shut down output. 1Green LED flashing: The inverter is adjusting power output. MPPT is in working condition. 2Green LED long in time: The inverter is in working condition with the maximum output power. Please pay attention of the voltage when use the product. The voltage is from 10.528V, if is not these voltage the product may broken. Non-professionals do not disassemble. Only qualified personnel may repair this product. Please install inverter in the low humidity and well-ventilated place to avoid the inverter over-heating, and clear around the inflammable and explosive materials. When using this product, avoid children touching, playing, to avoid electric shock. Optimal length of the DC input line 8M or less, long cable will allow solar panels to the inverter DC voltage drop caused by wear and tear. Connected to a power outlet to provide AC. Connected solar panels, battery DC input DC power supply cable. One standard AC wire. The item “1000W Watt Solar Micro Grid Tie Power Inverter for Solar Panel 10.5-30V AC” is in sale since Thursday, September 21, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “zhifang006-9″ and is located in Los Angeles. This item can be shipped to United States.

• Brand: Unbranded
• MPN: Does Not Apply

Unique circuit design, choice of import industrial electronic components, higher efficiency, more stable performance. Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more reliable. Parallel type design for DC input and modularization design for inverter, small volume, distributed installation, easy for system configuration, flexible for combination, strong expansibility of system. Adopting high-frequency isolation transformer type, high efficiency, and high security. Perfect electrical protection function. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion. Getting electronic circuit design, appearance design and other core technology patents. US 1000W Grid Tie Inverter MPPT For Solar Panel Stackable Pure Sine Wave. 10.5-30V VersionRated Power:1000W. DC Input Range:10.5-30V. MPPT Voltage:30.2VDC. Power Factor: More 97.5%. Stand-by Power:Less 2W. Product Size:31×16.5×5.5cm. Package Content: 1 x 1000W Grid Tie Inverter 1 x User’s Manaul 1 x US AC Cord Note: 1. This inverter only work with 12V Solar Panels(perfect compatible with Vmp18V), it CAN NOT be connected to ANY BATTERY as input source. The Output can only be connected to the grid, CAN NOT connect to the ANY BATTERY, NOR CAN it connect to ANY HOUSEHOLD APPLIANCES. Check if the power grid voltage is in the usable range of the inverter, and make sure the output terminal of inverter have been connected to the home grid but not other appliances. Please confirm the working environment, the inverter is NOT WORKING when under environment like RAINY DAYS, in the EVENING or HIGH TEMPERATURE PROTECTION. Stop working/No power output. Check if the DC switch open. Check if the DC terminals have connected right. Check if the negative and positive terminals have connected right. Check if the DC input voltage is in the usable range of the inverter. Check if the power grid voltage is in the usable range of the inverter. Check if the DC fuse have blow. Check if the power grid connected right to the inverter. DC terminal connected right, but no power output. After starting working, the FAULT red LED is not bright and the ST green LED blinking in working condition. If the green LED blinking and there have no power output, there maybe be some parts broken inside. Please help send back the defective products to us for analyze the reason. After starting working, if the FAULT red LED is bright and the ST green LED have not blinking, there may be some parts broken inside. Stop working, No LED bright. Broken parts—–DC input fuse/DC mosfet DC input fuse: Please open the DC fuse cap and check the fuse if blow. Or you can use the multimeter: adjust the watch hand in the tap position of diode, if it accese, means the fuse is OK. If it open circuit, means the fuse is broken, need to change. Please open the inverter and take out the PCB, find the U2 stabilivolt, measure if there have 5V output. If have 5V output, maybe the CHIP broken. If have not 5V, maybe the U2 or Q6 broken, need to change. Find the RF2, RF3, RF4, RF5, RF6, RF9 6 mosfets. Adjust the multimeter watch hand in the tap position of diode, measure the D pole and S pole, the black pen connect to D pole, and the red pen connect to S pole, if the resistance is over 0.45, means the mosfet is ok. If the value of resistance is 0, means the mosfet is breakdown, need to change. LED display OK, but no power output. Broken parts—-AC mosfet/AC fuse AC mosfet. Please open the inverter and take out the PCB, find the RF7, RF8, RF17, RF18 4 mosfets, Adjust the multimeter watch hand in the tap position of diode, measure the D pole and S pole, the black pen connect to D pole, and the red pen connect to S pole, if the resistance is over 0.45, means the mosfet is ok. If the resistance is 0, means the mosfet is breakdown, need to change. Find the F1 fuse, adjust the multimeter watch hand in the tap position of resistance, if the value of resistance is below 10 Ohm, means it ok. If the value of resistance is infinity or no value, mean the F1 fuse breakdown, need to change. 1 x 1000W Grid Tie Inverter 1 x US AC Cord. We are not responsible for any loss in transit if a wrong address is provided. We are continually expanding our product selection to better serve your need. We look forward to providing the best sevice to you – our dear customers, so take a look around our store and find the product that you want. You can put your trust in us! We strive to provide 5 STAR Feedback. If you think we are lacking in any important feedback categories, please be sure to tell us, so we have an opportunity to improve our performance. The item “1000W Watt Solar Micro Grid Tie Power Inverter for Solar Panel DC 10.5-30V AC” is in sale since Tuesday, July 18, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “ausluna0001″ and is located in United States. This item can be shipped to United States.

• Manufacturer Part Number: a17011100ux0006
• Main Color: Sliver,Black
• Brand: uxcell
• Net Weight: 2.1kg
• Country of Manufacture: CHINA
• Package Content: 1 x 1000W Grid Tie Inverter 1 x US AC Cord
• Material: Plastic,Metal
• ItemPackageQuantity: 1
• Product Size: 31×16.5×5.5cm
• MPN: a17011100ux0006
• UPC: 604267497803

Please be noted, This grid tie inverter cannot be used as off grid/stand alone solar system. The output need to be connected to the grid power. Can not supply power directly to the AC loads. Grid tie inverter is a device which directly converts direct current into alternating current which. Sine wave, frequency and phase are same as power grid and then feed into utility grid. It is a key. Device of power generation systems such as PV power generation system, wind turbine power. Smart Microinverter specially optimized design to work with modularization of DC. Power supplies which includes the mainstream solar modules, 18V (36 cells), 24V (60 cells) and. 36V (72 cells) monocrystal and/or Polycrystalline solar panels, wind turbines and batteries. Microinverters are stabilization, reliable and high conversion efficiency items. It is best choice for PV. Smart Microinverter can be easily placed and attached to the rack underneath of PV module. Need spaces for independent installation and low voltage DC wire connects from the PV module to. Smart Microinverter can eliminate the risk of high DC voltage. Philosophy for Smart Microinverterl insures the productiveness of the whole system and will not. Affect by a single point of failure. Each Smart Microinverter is individually connected to one PV. Module in the array. Each PV module has the individual Maximum Peak Power Point Tracker. Control and insures the maximum power is exported to the utility grid regardless of the. Performance of the other PV modules in the array. When PV modules in the array under non-ideal. Conditions in practical applications such as PV modules are affected by shading, soiling. Orientation, or mismatch, Smart Microinverter insures top performance for maximizes energy. Production from the whole PV system and gets return on investment in less time. Advantages of Smart Microinverter. Unique circuit design, choice of import industrial electronic components, higher efficiency, more. Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more. Parallel type design for DC input and modularization design for inverter, small volume, distributed. Installation, easy for system configuration, flexible for combination, strong expansibility of system. Adopting high-frequency isolation transformer type, high efficiency, and high security. Perfect electrical protection function. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion. Getting electronic circuit design, appearance design and other core technology patents. What’s In Box. 1 x 1000W Grid Tie Inverter. 1 x User’s Manaul. 1 x AC Cord (US/AU/EU/UK). The red terminal is connected with the DC positive electrode, and the black terminal is connected with the negative current. This product can be stacked. You can check it with your country? All return items must be in their original condition. Please do contact with us for return address, details and any other issues. My goal is to make sure you are happy and having the pleasant shopping with us. Any questions with solar power inverter will be replied within 24 hours except the weekend and statuary holiday in Chinese Beijing Time. The item “1000W Watt Solar Micro Grid Tie Power Inverter for Solar Panel 10.5-30V AC” is in sale since Wednesday, April 19, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “maomaopower” and is located in GuangZhou. This item can be shipped worldwide.

• MPN: KL-GTI100W
• Brand: Unbranded
• Country/Region of Manufacture: China
• Model: Pure sine wave inverter
• Power: 1000W
• Frequency range: 50Hz/60Hz(Auto control)
• Solar panel: 18V(36cells)
• Featured Refinements: Grid Tie Inverter
• Energy Type: Solar