1000W 1KW Solar on Grid Tie Inverter & Power Limiter DC 22-65V/45-90V PV System

Home & Farm Appliances. You may also like. 1000W 1KW Solar on Grid Tie Inverter & Power Limiter DC 22-65V/45-90V PV System. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Low cost and easy installation–it can make full use of all types of buildings’ surface that face to the sun in the city as well as fast and easy installation of solar modules and grid tie inverter. It just needs very low maintenance costs. Free combination — it can be used as a separate grid tie system and can be setup as a large solar array with many of them. Improving the efficiency of the entire solar power system– Because of MPPT function. So every panel is working at the maximum. 1000W Grid Tie Power Inverter. DC Input Voltage : 22V65V. AC Output Voltage Range. AC Output Frequency Range. 412815.5cm(16.14″11″6.1). DC Input Voltage : 45V90V. 2000W Grid Tie Power Inverter. 51.5x30x15cm(20.3″x11.8″x5.9). How to use the Inverter? Standard Grid Tie Inverter Model(one unit inverter). More than 1 unit inverters stackable. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. All excess power that is not needed by the load is then exported to the Grid. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Using Grid Tie Inverter With Limiter Model. 2.1 The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. 2.2 The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. 2.3 The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. Installation of GTIL With Internal Limiter. 3.1 This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. 3.2 External protective device including dc and ac SPD(Surge protection device), dc and ac breaker, etc is recommended to installed in the system. 1 x Solar Grid Inverter with Limiter(built-in). 1 x AC cable. 1 x Internal type Limiter clamp with sensor. 1 x User Manual. Goods in stock in USA, goods will be set by UPS. Or USA customers the most important thing. We strive to serve our customers and resolve any issues. Appreciate the opportunity to correct any issues you have before you leave feedback. Pls visit my store. We do appreciate your consideration and looking forward to doing business with all the clients and companies. We are manufacturers and wholesalers of solar panels and renewable energy products. Our solar business has been established since 2002. OEM and ODM services are both available. We would like to be your best supplier in China. Please take our working time into account. We will reply you in time, if you are in our working time. If you don’t receive our reply within one days, We must be out of work. Please contact me through. Public holidays in China is not available for message reply. The item “1000W 1KW Solar on Grid Tie Inverter & Power Limiter DC 22-65V/45-90V PV System” is in sale since Thursday, November 16, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “qecosolar” and is located in Rosemead, California. This item can be shipped worldwide.

Brand: ECO-WORTHY
MPN: ECO-L03
MPPT Efficiency: 99%
Power Factor: 0.99
Output Wave Form: Pure Sine Wave
Dimensions (W x H x D) 1KW: 41*28*15.5
Dimensions (W x H x D) 2KW: 51.5*30*15
Internal Limiter: Built-in
Featured Refinements: MPPT
Input Voltage: 22V-65V or 45V-90V
Output Voltage: 110V or 220V Auto
Output Frequency: 45-65Hz
Standby Power Consumption: <0.5w
Total Harmonic Distortion: <5%
Peak Inverter Efficiency: 92%

Category: 1000w | Comments Off

January 1

1000W Grid Tie Inverter 220V Pure Sine Wave Inverter Use For 24V/36V Solar Panel

1000W Grid tie inverter, pure since wave inverter. Use for 24V/36V Solar panel. Creative MPPT technology, efficiency more than 99%. Parallel type design for DC input and modularization design. Small volume, distributed installation, easy for system configuration. Adopting high-frequency isolation transformer type, high efficiency. Perfect electrical protection function. Stackable and Easy to install. Please be noted, This grid tie inverter cannot be used as off grid/stand alone solar system. The output need to be connected to the grid power. Can not supply power directly to the AC loads. Grid tie inverter is a device which directly converts direct current into alternating current which. Sine wave, frequency and phase are same as power grid and then feed into utility grid. It is a key. Device of power generation systems such as PV power generation system. Smart Microinverter specially optimized design to work with modularization of DC power supplies which includes the mainstream solar modules, 24V (60 cells) and 36V (72 cells) monocrystal and/or Polycrystalline solar panels. Smart Microinverters are stabilization, reliable and high conversion efficiency items. It is best choice for PV. Smart Microinverter can be easily placed and attached to the rack underneath of PV module. Need spaces for independent installation and low voltage DC wire connects from the PV module to. Smart Microinverter can eliminate the risk of high DC voltage. Philosophy for Smart Microinverterl insures the productiveness of the whole system and will not. Affect by a single point of failure. Each Smart Microinverter is individually connected to one PV. Module in the array. Each PV module has the individual Maximum Peak Power Point Tracker. (MPPT) control and insures the maximum power is exported to the utility grid regardless of the. Performance of the other PV modules in the array. When PV modules in the array under non-ideal. Conditions in practical applications such as PV modules are affected by shading, soiling. Orientation, or mismatch, Smart Microinverter insures top performance for maximizes energy. Production from the whole PV system and gets return on investment in less time. Advantages of Smart Microinverter. Unique circuit design, choice of import industrial electronic components, higher efficiency, more. Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more. Parallel type design for DC input and modularization design for inverter, small volume, distributed. Installation, easy for system configuration, flexible for combination, strong expansibility of system. Adopting high-frequency isolation transformer type, high efficiency, and high security. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion. Getting electronic circuit design, appearance design and other core technology patents. 120V(90-140V) or 230V(190-260V). What’s In Box. 1 x 1000W Grid Tie Inverter. 1 x User’s Manaul. 1 x AC Cord (US). The item “1000W Grid Tie Inverter 220V Pure Sine Wave Inverter Use For 24V/36V Solar Panel” is in sale since Wednesday, June 21, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “domitronic” and is located in Rowland Heights, California. This item can be shipped to United States, Brazil.

Brand: SolarEpic
Model: Grid tie inverter
MPN: GTI602100010204
Country/Region of Manufacture: China
Type: Pure sine wave inverter
Power: 1000W
DC Input voltage: 20V-45V
AC Output Voltage: 230V(190-260V)
Frequency: 50Hz/60Hz(Auto control)
Certification: CE ROHS
Ship from: USA,2-8 days delivery
Solar Panel: Fit for 60cells/72cells panel
Featured Refinements: Grid Tie Inverter
Energy Type: Solar
Bundle Listing: Yes

Category: 1000w | Comments Off

December 30

1000W Watt Solar Micro Grid Tie Power Inverter for Solar Panel 10.5-30V AC

Recommended using solar panels. Solar panel open circuit voltage range. Peak power tracking voltage. Maximum input operating current. Dimensions L× W × H. Reverse transfer, load priority. Red terminal: Connect DC positive, black terminal: Connect DC negative. 2 Input voltage range: 10.5V to 28V. Solar Panel: Recommend using the power more than 30W and the standard voltage of 17.5V PV panel. Recommend using multiple solar panels. Solar panel in series will result in high-input voltage which will exceed the working voltage range of the inverter. Wind turbine system: Rated voltage 24VDC, maximum voltage 28VDC. 2 Voltage range of the inverter whose output is 220V AC. 2 Voltage range of the inverter whose output is 110V AC. A:90140V (USA plug). B:180260V (Australian, British, European Union Plug OPTIONAL). 1Low-voltage protection (input DC voltage is less than 10.5VDC). 2Over-voltage protection (Input DC voltage is greater than 28.5VDC). 3Over-temperature protection when the chassis temperature is above 75. The temperature dropped about 2-10 minutes to restart automatically after cooling. 4Fault Protection (when 110VAC or 220VAC power outage or shutdown). 5Islanding protection: When the electric supply stop, the inverter automatically shut down output. 1Green LED flashing: The inverter is adjusting power output. MPPT is in working condition. 2Green LED long in time: The inverter is in working condition with the maximum output power. Please pay attention of the voltage when use the product. The voltage is from 10.528V, if is not these voltage the product may broken. Non-professionals do not disassemble. Only qualified personnel may repair this product. Please install inverter in the low humidity and well-ventilated place to avoid the inverter over-heating, and clear around the inflammable and explosive materials. When using this product, avoid children touching, playing, to avoid electric shock. Optimal length of the DC input line 8M or less, long cable will allow solar panels to the inverter DC voltage drop caused by wear and tear. Connected to a power outlet to provide AC. Connected solar panels, battery DC input DC power supply cable. One standard AC wire. The item “1000W Watt Solar Micro Grid Tie Power Inverter for Solar Panel 10.5-30V AC” is in sale since Wednesday, November 22, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “zhifang006-9″ and is located in Los Angeles. This item can be shipped to United States.

Brand: Unbranded
MPN: Does Not Apply

Category: 1000w | Comments Off

December 30

1000W Solar Inverter Grid Tie Inverter DC20V45V to AC110V or 220V 50Hz/60Hz CE

1000W Solar Power Inverter On Grid Tie Inverter DC20V-45V to AC120V or 230V 50Hz/60Hz. Please be noted, This grid tie inverter. Used as off grid/stand alone solar system. The output need to be connected to the grid power. Can not supply power directly to the. For the Inverter, we have. Please leave a message to tell me the Socket. Advantages of Smart Microinverter. Unique circuit design, choice of import industrial electronic components, higher efficiency, more stable performance. Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more reliable. Parallel type design for DC input and modularization design for inverter, small volume, distributed installation, easy for system configuration, flexible for combination, strong expansibility of system. Adopting high-frequency isolation transformer type, high efficiency, and high security. Perfect electrical protection function. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion. Getting electronic circuit design, appearance design and other core technology patents. The item “1000W Solar Inverter Grid Tie Inverter DC20V45V to AC110V or 220V 50Hz/60Hz CE” is in sale since Saturday, December 24, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “zcsolar2016″ and is located in , . This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

Brand: Unbranded
Model: SY1000
MPN: Does Not Apply
Country/Region of Manufacture: China

Category: 1000w | Comments Off

December 21

1000W Watt Solar Grid Tie Inverter DC 18V 30V 36V To AC 110V/220V With MPPT

You may also like. 1000W Watt Solar Grid Tie Inverter DC 18V 30V 36V To AC 110V/220V W/ MPPT. Smart Grid Tie inverter is a compact unit, which directly converts direct current into alternating current for powering appliances and/or office equipments and connecting to utility grid. Smart Micro inverter specially optimized design to work with modularization of DC power supplies which includes the mainstream solar modules. 18V(36cells), 24V(60 cells) and 36V (72cells). Moncrystal and/or polycrystalline solar panels and batteries. Distributed modularization design philosophy for smart micro inverter insures the productiveness of the whole system and will not affect by a single point of failure. Each Smart Micro inverter is individually connected to each PV module in the array. This unique configuation means that an individual Maximum Peak Power Point Tracker(MPPT) controls each PV modules in the array which may be affected by shading, soiling, orientation or mismatch, etc. Smart Micro inverter insures top performance for maximizing energy production from the whole PV system and gets return on investment in less time. Unique circuit design, choice of import industrial electronic components, higher efficiency, more stable performance. Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more reliable. Parallel type design for DC input and modularization design for inverter, small volume, distributed installation easy for system configuration, flexible for combination, strong expansibility of system. Adopting high-frequency isolation transformer type, high efficiency, and high security. Perfect electrical protection function. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion. Getting electronic circuit design, apperance design and other core technology Patents. User Manual (English) x1. Red terminal: Connect DC positive, black terminal: Connect DC negative. Shown in Figure 1. AC socket: Connection to the mains. The AC cord to the inverter 3 foot outlet, then the AC cord to home. Are shown in Figure 2. Switch: properly connected; turn on the switch, the inverter to work. Application of Street lights. Use this product, do not need to add a fan controller, solar panel controller, battery. This connection method, wind energy, solar energy can supply to the grid at the same time, the highest efficiency. (The purpose of small power inverter become high-power inverter). In order to achieve higher power use requirements, the use of this product can be stacked, such as: 4 grid inverter 300W of stack used is equal to 1200W, and the number of open stacks(No Quantitative Restrictions). Used as shown in Figure 2. Red LED indicator lights up under any conditions as listed below. Low-voltage protectionDC input voltage lower than Min. Input voltage of inverters. Over-voltage protectionDC input voltage higher than Max. Over-temperature protection inverters will be shut down for power output when the temperature of body of inverters higher than 65-75. And inverter will be automatically restart up when the temperature of body of the inverter down to 40-50. Power grid fault protection when 110VAC or 220VAC grid power outage and/or tripped. Islanding protection: inverter will be automatically shut down for power output when disconnect wit. We will message you if it happens. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. The item “1000W Watt Solar Grid Tie Inverter DC 18V 30V 36V To AC 110V/220V With MPPT” is in sale since Wednesday, September 14, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “solarregulator” and is located in Shenzhen. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

Brand: Y-SOLAR
Model: 1000W 36V Solar Inverter
MPN: 9699035
Country/Region of Manufacture: China
Frequency:: 50Hz/60Hz(Auto control)
Certification: CE ROHS
Type: Pure sine wave inverter
Function: With MPPT
Solar Panel: 24V/30V/36V 60cells/72cells panel

Category: 1000w | Comments Off

December 17

ECO 1000W Grid Tie Solar Power Inverter on Grid MPPT / Limter Home DC 22V TO 65V

Home & Farm Appliances. You may also like. The grid tie power inverter is the most efficiency and technologically advanced inverter for solar power system. Low cost and easy installation–it can make full use of all types of buildings’ surface that face to the sun in the city as well as fast and easy installation of solar modules and grid tie inverter. It just needs very low maintenance costs. Free combination — it can be used as a separate grid tie system and can be setup as a large solar array with many of them. Improving the efficiency of the entire solar power system– Because of MPPT function. So every panel is working at the maximum. 1000W Grid Tie Power Inverter. AC Output Voltage Range. AC Output Frequency Range. 412815.5cm(16.14″11″6.1). Installing Sunshine Grid Tie Power System involves several key steps. Considering the total capacity of the grid tie power system that you need. Choosing applicable solar panels for Sunshine Grid Tie Inverter. Selecting accessory for installation of the Grid Tie Power System. Selecting correct model of Sunshine Grid Tie Inverter. Installing solar panels to suitable place. Installing Sunshine Grid Tie Inverter to suitable place. Connecting Sunshine Grid Tie Power System with cables and connectors. Completing Sunshine installation map and Connecting the PV modules. The amount of tariff is consist of two parts. Arriving in 5-9 days. For the carrier to reach you once the package arrives. Only faulty item return be accepted within 14 days after you receiving the item. Only new original item is acceptable, including any accessories, manuals. We are manufacturers and wholesalers of solar panels and renewable energy products. The solar business has been established since 2002. The solar panel producing capacity is around 300MW yearly. We have sun simulators, laminating machine and. Supersonic glass washing machine to make the precisely solar panel for you. OEM and ODM services are both available. We would like to be your best supplier in China. For any question at any time. We work 5 days one week. Public holidays in China is not available for message reply. The item “ECO 1000W Grid Tie Solar Power Inverter on Grid MPPT / Limter Home DC 22V TO 65V” is in sale since Thursday, August 17, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “qecosolar” and is located in CN. This item can be shipped worldwide.

Brand: ECO-WORTHY
Model: 1000W GRID TIE POWER INVERTER
MPN: ECO-L03
Application: Suit for AC 110V 220V AUTO SWITCH
Input Volatge: 22V-65V
Features: MPPT / Limter Function

Category: 1000w | Comments Off

December 15

1000W New Grid Tie Inverter 22-65V or 45-90V DC LCD display MPPT Pure Sine Wave

1000GTIL2-LCD—-share the same program, but no clamp sensor would be sent if you choose model 1000G2-LCD. Latest updated program enable customers using battery discharge power mode. This is the 2. The first generation GTIL must be used with an additional limiter module, we also add an switch button to enable. The inverter either can work at limit mode or at normal grid tie mode. Generation GTIL, we integrated the limit function inside the GTI. Customer install inverter far away from the main circuit breaker, we also enable the 2. GTIL work with stand-alone limiter, we call this-external. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. Max input DC voltage. Peak power tracking voltage. 47.5-51.5 for 50hz; 59.3-60.5 for 60hz. Just for AC output. 20’C — +85’C. Settings Explainations on the LCD of the 2. The GTIL including various functions, all functions should configurate on the LCD setting page. Please see below explainations. Limit Mode:External limiter and Internal limiter are settable. Limit mode+External limiter both selected means work under external limiter mode. Limit mode+Internal limiter both selected means work under external limiter mode. LCD back light:Select it, Lcd will always on. Unselect it, Lcd will auto turn off after about 10s without any action on lcd button. Press any of the button to light lcd again. Remote Num:while using with wifi plug for monitoring, set by 1. While using with the WIFI-RTU(one rtu can monitoring multiple inverters), set monitored inverter numbers. Bat or solar limited current mode:This function is usable while using with battery. The setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level. Mppt function of the inverter will auto invalid when working under this setting. Set is 0.1V/step. Set is 0.1V/Step. The 22-65V type inverter will start up at 25V, and 45-90V type inverter will start up at 49.5V, after start, inverter can still work until 22v or 45v. Current sensor Orientation:Please check the current flow direction arrow on the sensor before use, make sure the connection is correct. Otherwise, inverter will not start up at limit mode. Negative power under AC voltage means power overflow to the grid. Positive means power come from the grid. Clamp Sensor with 2m cable—1pcs;(only available for 1000GTIL2-LCD). The item “1000W New Grid Tie Inverter 22-65V or 45-90V DC LCD display MPPT Pure Sine Wave” is in sale since Thursday, June 08, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “sunhome910″ and is located in shanghai. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

Brand: Tricorpower
MPN: Does Not Apply
Country/Region of Manufacture: China

Category: 1000w | Comments Off

December 13

1000W LCD Solar Grid Tie Inverter with internal limiter MPPT Pure Sine Wave

1000W LCD Solar Grid Tie inverter With internal limiter function, MPPT pure sine wave on grid inverter. DC22-65V/45-90V to AC110V / 230V Auto Sensing, Battery or solar panels max power limit mode, latest program. This is the 2. The first generation GTIL must be used with an additional limiter module, we also add an switch button to enable. The inverter either can work at limit mode or at normal grid tie mode. Generation GTIL, we integrated the limit function inside the GTI. Customer install inverter far away from the main circuit breaker, we also enable the 2. GTIL work with stand-alone limiter, we call this-external. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. Max input DC voltage. Peak power tracking voltage. 47.5-51.5 for 50hz; 59.3-60.5 for 60hz. Just for AC output. 20’C — +85’C. Settings Explainations on the LCD of the 2. The GTIL including various functions, all functions should configurate on the LCD setting page. Please see below explainations. Limit Mode:External limiter and Internal limiter are settable. Limit mode+External limiter both selected means work under external limiter mode. Limit mode+Internal limiter both selected means work under external limiter mode. LCD back light:Select it, Lcd will always on. Unselect it, Lcd will auto turn off after about 10s without any action on lcd button. Press any of the button to light lcd again. Remote Num:while using with wifi plug for monitoring, set by 1. While using with the WIFI-RTU(one rtu can monitoring multiple inverters), set monitored inverter numbers. Bat or solar limited current mode:This function is usable while using with battery. The setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level. Mppt function of the inverter will auto invalid when working under this setting. Set is 0.1V/step. Set is 0.1V/Step. The 22-65V type inverter will start up at 25V, and 45-90V type inverter will start up at 49.5V, after start, inverter can still work until 22v or 45v. Current sensor Orientation:Please check the current flow direction arrow on the sensor before use, make sure the connection is correct. Otherwise, inverter will not start up at limit mode. Negative power under AC voltage means power overflow to the grid. Positive means power come from the grid. Clamp Sensor with 2m cable—1pcs. Russian buyers were required to fill in the full name; Brazilian buyers are required to leave CPF/CPNJ Number; Chilean buyers are required to leave RUT number. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! The item “1000W LCD Solar Grid Tie Inverter with internal limiter MPPT Pure Sine Wave” is in sale since Thursday, June 08, 2017. This item is in the category “Electronics\Solar\Chargers, Inverters”. The seller is “sunhome910″ and is located in Shanghai. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.

Brand: Ecopower
Model: 1000GTIL2-LCD
MPN: Does Not Apply

Category: 1000w | Comments Off

December 9

New 1000W Pure Sine Wave Grid Tie Power Inverter for Wind Generator System Home

You may also like. 1000W Wind Power Grid Tie Inverter. Low cost and easy installation. Directly connect to three phase wind turbine. Much better output waveform compare with similiar GTI. Improving the efficiency of the entire solar power system. Overload protection , Anti-island protection. Short-circuit protection/Reverse polarity protection. AC output voltage and current THD<5%, PF>99%. Build in dump load function. Installing Sunshine Grid Tie Power System involves several key steps. Considering the total capacity of the grid tie power system that you need. Choosing applicable solar panels for Sunshine Grid Tie Inverter. Selecting accessory for installation of the Grid Tie Power System. Selecting correct model of Sunshine Grid Tie Inverter. Installing solar panels to suitable place. Installing Sunshine Grid Tie Inverter to suitable place. Connecting Sunshine Grid Tie Power System with cables and connectors. Completing Sunshine installation map and Connecting the PV modules. 1000W 12V Wind Power Grid Tie Inverter. Input AC/DC Voltage Range. AC Output Voltage Range. 412815.5cm(16.14″11″6.1). This interface will show the real time grid waveform. The grid voltage and frequency also will show in this interface. The energy interface will show the power generation curve everyday. Today KWH and Total KWH are also show in this page. In this interface, the display shows real time power, PV input voltage, inside temperature, date and time. Clock and date setting. 1pc 1000W 12V Wind Grid Tie Power Inverter. For more items and promotion disccounts! We appreciate your business and consideration. Our solar business has been established since 2002. OEM and ODM services are both available. We would like to be your best supplier. Please take our working time into account. The item “New 1000W Pure Sine Wave Grid Tie Power Inverter for Wind Generator System Home” is in sale since Wednesday, June 28, 2017. This item is in the category “Electronics\Solar\Chargers, Inverters”. The seller is “bgoodsolar876″ and is located in CN. This item can be shipped worldwide.

Brand: ECO-WORTHY
MPN: ECO-L03020201004-1
Power: 1000W
Model: 12V Wind Grid Tie Inverter
Input voltage: 12V
Output voltage: 110V OR 220V

Category: 1000w | Comments Off

November 30

1000W Grid Tie Inverter 110V or 220V MPPT Pure Sine Wave Inverter 50Hz/60Hz Auto

1000W Grid Tie Inverter DC10.8-30V to AC110V MPPT Pure Sine Wave Inverter 50Hz/6. 1000W Grid Tie Inverter DC10.8-30V to AC110V MPPT Pure Sine Wave Inverter 50Hz/60Hz Auto Description: – Grid tie inverter is a device which directly converts direct current into alternating current which sine wave, frequency and phase are same as power grid and then feed into utility grid. It is a key device of power generation systems such as PV power generation system, wind turbine power generation system. Smart Microinverter specially optimized design to work with modularization of DC power supplies which includes the mainstream solar modules, 18V (36 cells), 24V (60 cells) and 36V (72 cells) monocrystal and/or Polycrystalline solar panels, wind turbines and batteries. Smart Microinverters are stabilization, reliable and high conversion efficiency items. It is best choice for PV power generation systems. Smart Microinverter can be easily placed and attached to the rack underneath of PV module. No need spaces for independent installation and low voltage DC wire connects from the PV module to – Smart Microinverter can eliminate the risk of high DC voltage. Distributed modularization design philosophy for Smart Microinverterl insures the productiveness of the whole system and will not affect by a single point of failure. Each Smart Microinverter is individually connected to one PV module in the array. Each PV module has the individual Maximum Peak Power Point Tracker (MPPT) control and insures the maximum power is exported to the utility grid regardless of the performance of the other PV modules in the array. When PV modules in the array under non-ideal conditions in practical applications such as PV modules are affected by shading, soiling, orientation, or mismatch, Smart Microinverter insures top performance for maximizes energy production from the whole PV system and gets return on investment in less time. Advantages of Smart Microinverter – Unique circuit design, choice of import industrial electronic components, higher efficiency, more stable performance. Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more reliable. Parallel type design for DC input and modularization design for inverter, small volume, distributed installation, easy for system configuration, flexible for combination, strong expansibility of system. Adopting high-frequency isolation transformer type, high efficiency, and high security. Perfect electrical protection function. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion. Getting electronic circuit design, appearance design and other core technology patents. Package included: – 1 x 1000W Grid Tie Inverter – 1 x User’s Manaul – 1 x AC Cord. The item “1000W Grid Tie Inverter 110V or 220V MPPT Pure Sine Wave Inverter 50Hz/60Hz Auto” is in sale since Tuesday, March 28, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “trustinchina” and is located in Walton, Kentucky. This item can be shipped to United States.

Brand: Unbranded
MPN: Does Not Apply

Category: 1000w | Comments Off

January 2025
M	T	W	T	F	S	S
« Dec
		1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	31