1000W Solar Grid Tie Inverter DC 10.5V-30V AC 110V Pure Sine Wave MPPT Solar Pow

In different current fluctuations, we should use the MPPT function. When the MPPT function adjusted tothe maximum power point, the product automatically powers locked in maximum power point, then made theoutput power more stable.

Category: 1000w | Comments Off

November 29

1000W Wind Turbine Grid Tie Inverter DC Input 22v-65V 45V-90V Pure Sine Wave

Pure Sine Wave output. Directly connect to three phase wind turbine, without regulator. Choosing an applicable wind turbine for TINGEN Grid Tie Inverter.

Category: 1000w | Comments Off

July 14

1000w Grid Tie Inverter 110v Use For 24v/36v Solar Panel Pure Sine Wave Inverter

1000w Grid Tie Inverter 110v Use For 24v/36v Solar Panel Pure Sine Wave Inverter. 1000w Grid Tie Inverter 110v Use For 24v/36v Solar Panel Pure Sine Wave Inverter Sturdy Aluminum Alloy MPPT Function Intelligent Fan Cooling LED Indicators Multiple Protection Designs Distributed Installation DC Input Range 20 45VDCCooling Fan coolingWaterproof Indoor designSolar Panels 60cells Vmp26 30VVoc34 38VGrid Disturbance EN 50178 EN 62109 1 VDE0126 1 12DC MAX. Current 45AAC Output 115VAC90 140VACWorking Temperature 20 65/ 13 149MPPT Voltage 24 38VDCFrequency 50Hz/60HzAuto controlRated Power 1000WattEMC EN61000 6 32007 EN61000 6 12007Power Factor >98Stand by Power. DC Input Range 20 45VDCCooling Fan coolingWaterproof Indoor designSolar Panels 60cells Vmp26 30VVoc34 38VGrid Disturbance EN 50178 EN 62109 1 VDE0126 1 12DC MAX.

Category: 1000w | Comments Off

May 14

1000w 2000w Solar Inverter With Limiter Sensor Mppt On Grid Tie Inverter Converter

Category: 1000w | Comments Off

April 28

1000W Solar Grid Tie Inverter Limiter DC 22-65V 45-90V AC 110V 120V 220V 230V @

1000W Solar Power Grid Tie Inverter with Limiter. Easy installation, Can be paralleled on AC side. Nice LCD display various parameters including input voltage, output power, temperature, power curve, output sine wave- form etc. Can be integrated with internal limit function. Battery discharge power mode enabled, Can auto regulate depth of discharge of the battery bank. RS485 extended interface serviceable. Standard Grid Tie Inverter. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. Power Limit Function-Stop to send excess power to the grid. When the inverter is working, all excess power that is not needed by the load is then exported to the Grid. Electric meters (except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. Most of the time, more electricity is used at night. Solar panels work only during the day when there is sunlight. User can use battery instead of solar panels. The system will work the whole day. User can set the battery discharge voltage and reboot voltage. The system will work automatically. Monitor the operating status of the inverter in mobile applications. Technical Parameter Data Sheet. Input DC Voltage Range. Peak power tracking voltage. AC Output Voltage Range. User Manual Down Load. Certifications : CE, VDE-0126, EN50438. Q:Can this device charge a battery? A: No, it accepts battery input. But it can not charge a battery. Q:Can I install more than one inverters in my house? A: Yes, the grid tie inverters can be installed in Parallel. Q: How long is the limiter sensor/clamp cable? Thanks for your kindly understand. We are committed to resolve all issues in a friendly and satisfactory manner. We care about our valued buyers, if you have any questions, our Customer Service staffs will be very glad to help you. We try our best to reply to your emails as soon as possible, however, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. Your recognition will make us more confident to develop business and serve you better. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. Here is illustration shows how to leave me the feedback, please follow the step, thank you very much! And hope to see you soon. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “maxiaowei2012″ and is located in this country: CN. This item can be shipped worldwide.

Limiter Sensor:: Add Sensor
Wi-Fi Port:: with WiFi Port
Input Voltage:: DC 22-65V
Model: SUN-1000GTIL-LCD
Custom Bundle: No
Type: Charger/Inverter
Color: Blue
Brand: Unbranded
Current Rating: 21-30 A
Inverter Technology: Microinverter
Country/Region of Manufacture: China
Wattage: 900-999 W
Current Type: DC
System Configuration: Grid-Tie
Maximum Input Voltage: 81-90 V
Power Source: Solar
Features: Automatic Voltage Detection, LCD Display, Wi-Fi Port
Protection Properties: Low Voltage Protection, Overcurrent Protection, Overload Protection
Power: 901-1000 W
Current Output: 10 A or Less
Voltage:: 22-65V or 45-90V
Application:: Home/Garden
MPN:: SUN-1000GTIL-LCD
Recommended Environment:: Indoor
Charging Mode:: MPPT (Maximum Power Point Tracking)
Resistance Properties:: Heat Resistant

Category: 1000w | Comments Off

April 21

1000W on Grid Tie Inverter MPPT Stackable Pure Sine Wave DC15-28V to AC90V-140V

1000W on Grid Tie Inverter MPPT Stackable Pure Sine Wave DC15-28V to AC90V-140V Output for 12V Solar Panel. 15.71 x 8.23 x 4.41 inches. 1KW for Voc 20-24V PV Panel. Power Inverters Range:Grid Tie Inverter MPPT Range 15.5-23V? DO NOT use solar controller load ports to connect to the inverter. This is On Grid. The AC output needs to be connected to the grid. Important Note: Vmp(of a solar panel) must be in the MPPT range to ensure the good output efficiency. Micro Grid Tie Inverter Doesn’t work with 12V battery? Each time you move the inverter, tighten the DC connection terminals. Avoid short circuit of DC terminal due to loose connection? 200W-1000W Solar Panel:Vmp: 18-21V, Voc: 20-24V? Please do not use other voltage input, for example: (10.8V-15V)and (25-30V)? The DC positive and negative connections are reversed, and the inverter Led will not light up. Powerful Cooling: Fan-cooled+aluminum shell, more better cooling function, smart and light (2.4 kg), easy to carry and handle. Multi-protection Function:Micro Inverter Max Power Point Tracking and Stackable, Island Protection. If the DC connection is loose and causes a short circuit, then smoke may be emitted. The inverter adopts aluminum alloy casing, so there is no fire. EpRec 1000W Grid Tie Inverter – System Requirements and Technical Specifications. Maximum AC Output Power. 200W or higher, Voc20-24V;Vmp18-21V. Grid Tie Inverter, Power cord US Plug, English user manual. Some buyers may have concerns about the output power not reach their expectations. Here is the reason. This unit was ideally designed for a 18V solar panel If using 12v battery as input, the inverter will not reach it’s max power point. We will suggest using 24v battery as input source to get a better output power. There’s always a loss in power in conversion from DC to AC. Also through Heat loss of energy. So if you’re expecting to get you’re 100 % out of the machine it won’t give you that. Solar panel has the loss too, so please don’t calculate the efficiency as inverter output power/solar panel specification. Because solar panel and invergter all have own efficiency. We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “yemini4u” and is located in this country: US. This item can be shipped to United States.

Item Weight: 5.36 Pounds
Package Dimensions: 15.71 x 8.23 x 4.41 inches
Size: 1KW for Voc 20-24V PV Panel
Total Power Outlets: 1
Input Voltage: 12 Volts
Output Power: 1000 Watts
UPC: 7445041225235
EAN: 07445041225235

Category: 1000w | Comments Off

April 17

1000W Grid Tie Inverter Stackable MPPT Pure Sine for 24V Solar Panel Voc38-46V

1000W Grid Tie Inverter Stackable MPPT Pure Sine for 24V Solar Panel Voc38-46V. Grid Tie Inverter MPPT range: 26V – 36V? DO NOT use solar controller load ports to connect to the inverter? Solar Grid Tie Inverter-Vmp(of a solar panel) must be in the MPPT range to ensure the good output efficiency? Grid Tie Inverter cannot work, please contact Yong Hui merchant? Grid Tie Solar Inverter-Creative MPPT technology, efficiency more than 99%? Please do not use other voltage input, for example: (20V) or(45V) Please use 200W-1000W solar panel (Voc36-46V)? MPPT Micro Inverter-Max Power Point Tracking and Stackable, Island Protection. If the DC connection is loose and causes a short circuit, then smoke may be emitted. The inverter adopts aluminum alloy cg, so t is no fire. Grid Tie Micro Inverter-Adopting high-frequency isolation transformer type, high efficiency? Each time you move the inverter, tighten the DC connection terminals. Avoid short circuit of DC terminal due to loose connection? This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “best-invest4u” and is located in this country: US. This item can be shipped to United States.

Brand: Does Not Apply; Does Not Apply
seller: YongHui
Is Discontinued By Manufacturer: No
Customer Reviews: 4.0 out of 5 stars
Item model number: GTI-1000W-36V-110V-S
Country of Origin: China
Product Dimensions: 13 x 6 x 3 inches
Efficiency: 99
Item Weight: 5.38 Pounds; 5.38 pounds
Output Power: 1000 Watts
Input Voltage: 45 Volts
Total Power Outlets: 2
Item Dimensions LxWxH: 13 x 6 x 3 inches
Color: Silver
Power Source: Solar Powered
Output Voltage: 140 Volts
Size: for 24V Solar Panel Voc38-46V

Category: 1000w | Comments Off

February 19

1000W Pure Sine Wave Inverter 12V DC to 110V AC Power Inverter Solar Converter

Pure Sine Wave Inverter 12V 110V Converter 1000W With USB&Type-C, Remote Control. The pure sine wave inverter is built as a portable generator, providing high-quality alternating current, which can meet most of the electricity needs, and can be used for home and outside use. The unique dynamic current loop control technology ensures reliable operation of the inverter. Load adaptability, including inductive load, capacitive load, resistive load, mixed load. Heavy load capacity and impact resistance. It has perfect protection functions such as input overvoltage, undervoltage, overload, overheat, and output short circuit. The sine wave inverter adopts LCD liquid crystal display mode, and the state is clear. Stable performance, safe and reliable, long service life. Wide range of applications. Power Tools: Circular saws, electric drills, grinding machines, grinders, bumpers, weeders and trimmers, air compressors. Home entertainment electronic devices: TV, video cassette recorders, video game consoles, audio, musical instruments. Industrial equipment: cloud server, face recognition server, intelligent manufacturing robot, emergency system. Household appliances: vacuum cleaners, fans, fluorescent and incandescent lamps, razors, sewing machines. Office equipment: computers, printers, surveillance, fax machines, scanners. Kitchen appliances: coffee machine, blender, ice mark, toaster. Input voltage (DC): 12V. Output voltage (AC): 110V. Waveform: pure sine wave. No-load current: 0.6A. Product weight: 3.0kg. How to use the remote control. Before using the remote control, it must be paired with the inverter; after long pressing the power button of the inverter, after seeing the red light, press the power button of the remote control continuously, the red light flashes, and the setting is complete. The remote control range is less than or equal to 10 meters (Note: If the remote control is disconnected, please re-pair). Install the inverter according to local power requirements. The installation site must be dry, clean and well ventilated. Operating temperature: -20°C to 40°C. Storage temperature: -10 to 40°C. Relative humidity: 0% to 90%, no condensation. Keep the inverter away from water to avoid water splashing on the machine or rising. Do not insert or unplug the plug with wet hands. Put the inverter in a cool environment, the suitable temperature is -20°C40°C, avoid direct sunlight and hot air. Keep the inverter away from places where flammable materials or flammable gases gather. 1 x Power Inverter. 2 x Power Cord. Please make sure you have a valid account before purchasing. PO Box addresses are not accepted. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “datouboss01″ and is located in this country: US. This item can be shipped to United States, Canada, Mexico.

Waveform: Pure Sine Wave
Current Output: 10 A or Less
System Configuration: Grid-Tie
Power Source: Solar
Custom Bundle: No
Wattage: 1000W
MPN: 01
Continuous Power: 1000W
Current Type: AC/DC
Voltage: 12V
Product Weight: 3.0kg
Features: LCD Display, Temperature Control, USB Port
Protection Properties: Lightning Protection, Low Voltage Protection, Overcharge Protection, Overcurrent Protection, Overload Protection, Overvoltage Protection, Reverse Current Protection, Reverse Polarity Protection, Reverse Voltage Protection, Safety Circuit Protection, Short Circuit Protection
Maximum Input Power: 2000W
Maximum Input Voltage: 12V
Remote Control: Yes
Inverter Technology: Battery-Based
Color: Orange
Current Rating: 1-5 A
Material: Aluminum alloy
Product Size: 300*173*76mm
Brand: DATOUBOSS
Type: Charger/Inverter
Connector Configuration: F
Model: Pure Sine Wave
Recommended Environment: Indoor/Outdoor
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Abrasion Resistant, Acid Resistant, Antimicrobial Resistant, Chemical Resistant
Country/Region of Manufacture: China
Application: Commercial, Electronics, Home/Garden, Recreational Vehicle (RV)
Power: 1000W
UPC: Dose not apply

Category: 1000w | Comments Off

January 28

1000W Grid Tie Inverter MPPT Pure Sine Wave DC10.8-32V to AC90-140V for 36V

Description This grid tie inverter can effectively convert sunlight into clean green energy. It uses imported industrial electronic components, innovative MPPT technology and an isolated high-frequency transformer to make the efficiency higher than 99%, which is a more responsive, and higher output efficiency in photovoltaic power generation application systems. Its powerful output can effectively generate electricity for you. Key Features High-quality Material: The grid tie inverter is made of aluminum alloy, which is rust-free, heat-resistant, cold-resistant and anti-corrosion. It also uses imported industrial electronic components, which you can use for a long time. Environmental-friendly Choice: This grid tie inverter converts the direct current generated by the solar panel into alte. 1000W Grid Tie Inverter MPPT Pure Sine Wave DC10.8-32V to AC90-140V for 36V. This grid tie inverter can effectively convert sunlight into clean green energy. High-quality Material: The grid tie inverter is made of aluminum alloy, which is rust-free, heat-resistant, cold-resistant and anti-corrosion. Environmental-friendly Choice: This grid tie inverter converts the direct current generated by the solar panel into alternating current, providing an environment-friendly and pollution-free continuous energy source. High Efficiency: The product adopts a unique circuit design, imported industrial electronic components, isolated high-frequency transformer, and unique MPPT technology, with efficiency greater than 99%, so it can achieve sensitive response and more stable maximum power point locking. Pure Sine Wave: The grid tie inverter provides the same clean and pure sine wave output as the power supply. It can better protect sensitive devices, provide stronger driving ability, and lower power consumption. Electrical Isolation: The complete electrical isolation of machine output and input makes the entire power distribution system well-insulated, and the use of a fully isolated step-up circuit makes its use safer and more reliable. Safe and Secure: This product has a great electrical protection function. And the sturdy aluminum alloy shell can better prevent rainwater from eroding the surface, dropping and collision, so you can use it with confidence. Flexible Installation: The grid tie inverter adopts the modular design of parallel components, so you can conduct distributed installation according to your specific needs. Excellent Cooling Capacity: It is equipped with a high-speed intelligent cooling fan. When the temperature exceeds 45? /113°F, it will automatically start to work to prevent the inverter from overheating. Small Floor Space: The size of this grid tie inverter is only 10.66.52.1inch, which does not occupy much space and can even be installed in small stores. High Security: This grid tie inverter has passed the professional CE and RoHS certifications. In addition, it also has some core technology patents for electronic circuit design, appearance design and so on. Therefore, it is a trustworthy product. Simple Structure: Its structure is simple. Therefore, you only need to clean the dust on the grid tie inverter without disassembly and reassembly. Gaskets: The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. Heat Dissipation Holes: The body has multiple heat dissipation holes, which help the machine to dissipate heat and enable it to run smoothly. It is very suitable for grid-connected power generation in schools, power stations and households. It is applicable to 36V solar panel and 36V battery. AC Output Power:1000W. Maximum AC Output Power:1050W. AC Output Voltage: 110V(AC 90V-140V). DC Input: DC 20V-50V. Frequency Range: 48- 62Hz(Self-adaption). Scope of Application: 36V Solar Panel and 36V Battery. Package Size: 352010cm/13.87.93.9in. Product Size: 2116.55.3cm/10.66.52.1in. Gross Weight: 4kg/8.8lbs. Net Weight: 3.5kg/7.7lbs. 1 Set English Manual. All Accessories for Assembly. Please note that the input and output voltage must be within the voltage range of the product. Please note that the output port of the inverter must be connected to the household power grid socket (civil single-phase power grid) through an AC power line so that the product can work normally! Please note that the PV input power is recommended to be greater than 20% of the rated power of the product. Please note that the Vmp of the solar panel must be within the MPPT range to ensure the best MPPT maximum power output. We recommend using 36V photovoltaic panels (VOC voltage between 26-50V) or 36V batteries as input power to obtain better output power. Please note that the DC terminal must be tightened, otherwise, the product may be damaged. Please note that the grid tie inverter cannot be used as off grid/stand alone solar system. The output needs to be connected to the grid power. And it can not supply power directly to the AC loads. Please read the operating manual completely before use. And pay particular attention to the safety instructions included. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “easybuy4uuu” and is located in this country: US. This item can be shipped to United States.

Custom Bundle: No
Current Type: AC/DC
Features: Corrosion Resistant, All Daylight Conditions
Application: Home/Garden, Agriculture/Farming, Commercial, Irrigation
Charging Mode: MPPT (Maximum Power Point Tracking)
Power Source: Solar
Inverter Technology: Microinverter
Color: Silver
Recommended Environment: Indoor/Outdoor
System Configuration: Grid-Tie
Type: Charger/Inverter
Model: GTI1000W
Resistance Properties: Abrasion Resistant, Chemical Resistant, Corrosion Resistant
AC Output Power: 1000W
Material: Aluminium Alloy
Maximum AC Output Power: 1050W
AC Output Voltage: 110V(AC 90V-140V)
DC Input: DC10.8V-32V
Frequency Range: 48-62Hz(Self-adaption)
MPPT Range: 15.5-22V
Scope of Application: 36V Solar Panel and 36V Battery
Size: 21*16.5*5.3cm/10.6*6.5*2.1in
Brand: Unbranded

Category: 1000w | Comments Off

January 27

1000W Grid Tie Inverter MPPT Electrical Isolation DC10.8-32V to AC90-140V

Description This grid tie inverter can effectively convert sunlight into clean green energy. It uses imported industrial electronic components, innovative MPPT technology and an isolated high-frequency transformer to make the efficiency higher than 99%, which is a more responsive, and higher output efficiency in photovoltaic power generation application systems. Its powerful output can effectively generate electricity for you. Key Features High-quality Material: The grid tie inverter is made of aluminum alloy, which is rust-free, heat-resistant, cold-resistant and anti-corrosion. It also uses imported industrial electronic components, which you can use for a long time. Environmental-friendly Choice: This grid tie inverter converts the direct current generated by the solar panel into alte. 1000W Grid Tie Inverter MPPT Electrical Isolation DC10.8-32V to AC90-140V. This grid tie inverter can effectively convert sunlight into clean green energy. High-quality Material: The grid tie inverter is made of aluminum alloy, which is rust-free, heat-resistant, cold-resistant and anti-corrosion. Environmental-friendly Choice: This grid tie inverter converts the direct current generated by the solar panel into alternating current, providing an environment-friendly and pollution-free continuous energy source. High Efficiency: The product adopts a unique circuit design, imported industrial electronic components, isolated high-frequency transformer, and unique MPPT technology, with efficiency greater than 99%, so it can achieve sensitive response and more stable maximum power point locking. Pure Sine Wave: The grid tie inverter provides the same clean and pure sine wave output as the power supply. It can better protect sensitive devices, provide stronger driving ability, and lower power consumption. Electrical Isolation: The complete electrical isolation of machine output and input makes the entire power distribution system well-insulated, and the use of a fully isolated step-up circuit makes its use safer and more reliable. Safe and Secure: This product has a great electrical protection function. And the sturdy aluminum alloy shell can better prevent rainwater from eroding the surface, dropping and collision, so you can use it with confidence. Flexible Installation: The grid tie inverter adopts the modular design of parallel components, so you can conduct distributed installation according to your specific needs. Excellent Cooling Capacity: It is equipped with a high-speed intelligent cooling fan. When the temperature exceeds 45? /113°F, it will automatically start to work to prevent the inverter from overheating. Small Floor Space: The size of this grid tie inverter is only 10.66.52.1inch, which does not occupy much space and can even be installed in small stores. High Security: This grid tie inverter has passed the professional CE and RoHS certifications. In addition, it also has some core technology patents for electronic circuit design, appearance design and so on. Therefore, it is a trustworthy product. Simple Structure: Its structure is simple. Therefore, you only need to clean the dust on the grid tie inverter without disassembly and reassembly. Gaskets: The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. Heat Dissipation Holes: The body has multiple heat dissipation holes, which help the machine to dissipate heat and enable it to run smoothly. It is very suitable for grid-connected power generation in schools, power stations and households. It is applicable to 36V solar panel and 36V battery. AC Output Power:1000W. Maximum AC Output Power:1050W. AC Output Voltage: 110V(AC 90V-140V). DC Input: DC 20V-50V. Frequency Range: 48- 62Hz(Self-adaption). Scope of Application: 36V Solar Panel and 36V Battery. Package Size: 352010cm/13.87.93.9in. Product Size: 2116.55.3cm/10.66.52.1in. Gross Weight: 4kg/8.8lbs. Net Weight: 3.5kg/7.7lbs. 1 Set English Manual. All Accessories for Assembly. Please note that the input and output voltage must be within the voltage range of the product. Please note that the output port of the inverter must be connected to the household power grid socket (civil single-phase power grid) through an AC power line so that the product can work normally! Please note that the PV input power is recommended to be greater than 20% of the rated power of the product. Please note that the Vmp of the solar panel must be within the MPPT range to ensure the best MPPT maximum power output. We recommend using 36V photovoltaic panels (VOC voltage between 26-50V) or 36V batteries as input power to obtain better output power. Please note that the DC terminal must be tightened, otherwise, the product may be damaged. Please note that the grid tie inverter cannot be used as off grid/stand alone solar system. The output needs to be connected to the grid power. And it can not supply power directly to the AC loads. Please read the operating manual completely before use. And pay particular attention to the safety instructions included. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “provideautoparts” and is located in this country: US. This item can be shipped to United States.

Custom Bundle: No
Current Type: AC/DC
Features: Corrosion Resistant, All Daylight Conditions
Application: Home/Garden, Agriculture/Farming, Commercial, Irrigation
Charging Mode: MPPT (Maximum Power Point Tracking)
Power Source: Solar
Inverter Technology: Microinverter
Color: Silver
Recommended Environment: Indoor/Outdoor
System Configuration: Grid-Tie
Type: Charger/Inverter
Model: GTI1000W
Resistance Properties: Abrasion Resistant, Chemical Resistant, Corrosion Resistant
AC Output Power: 1000W
Material: Aluminium Alloy
Maximum AC Output Power: 1050W
AC Output Voltage: 110V(AC 90V-140V)
DC Input: DC10.8V-32V
Frequency Range: 48-62Hz(Self-adaption)
MPPT Range: 15.5-22V
Scope of Application: 36V Solar Panel and 36V Battery
Size: 21*16.5*5.3cm/10.6*6.5*2.1in
Brand: Unbranded

Category: 1000w | Comments Off

November 2024
M	T	W	T	F	S	S
« Oct
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30