Solar Grid Tie Micro Inverter For Solar Panel Grid Tie Waterproof Inverter 700W

Description An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This micro inverter makes it easier. Made of fine aluminum alloy, this IP65 waterproof inverter has a wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. Key Features Premium Material: The inverter is made of aluminum alloy, which is durable, corrosion-resistant, and not easy to rust. You can use it for a long time without frequent replacement, and your cost can be saved. High Efficiency: The inverter has built-in high-precision maximum power point tracking, which can optimize the power collection from the solar panel, accurately capture and lock. Solar Grid Tie Micro Inverter For Solar Panel Grid Tie Waterproof Inverter 700W. An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. The inverter is made of aluminum alloy, which is durable, corrosion-resistant, and not easy to rust. The inverter has built-in high-precision maximum power point tracking, which can optimize the power collection from the solar panel, accurately capture and lock the maximum output power point, and greatly increase power generation to more than 25%. In addition, the efficient power reverse transmission technology can transmit the power that can not be used up to the grid in the reverse direction to other places for use, and the power transmission rate can reach 99.9%. The inverter is equipped with an LCD display screen to monitor voltage, power, frequency, current, etc. So you can see the machine clearly in operation. The inverter adopts intelligent soft switching technology, high-frequency switching power supply technology, and 32-bit DSP full digital SPWM control technology, making the product strong anti-interference ability, fast operation speed, high intelligence, and a powerful functional system, which can meet the needs of users. The output and input of the system are completely electrically isolated, the insulation performance of the entire power distribution system is good, and the fully isolated booster circuit is safer and more reliable. The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. Besides, the IP65 waterproof design can prevent rain from eroding its surface, so you can use it with confidence. After the installation of the power station, you don’t need to do maintenance work. After a long period of use, you only need to remove the dust from the photovoltaic panel. With a size of 8.392.289.84inch, the inverter adopts high-frequency telephone, micro processing, and other technologies, so it is smaller, lighter, and won’t occupy too much space. During installation, you can stack multiple inverters at will, form a single-phase parallel stacking system, or conveniently form a three-phase system to provide a three-phase AC. We have been working hard to provide better service and quality for our customers, which is our goal. If there is any quality problem with our inverters. The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. The inverter is provided with heat dissipation holes, which can play a good role in heat dissipation and prolong the service life of the inverter. This product is applicable to 30V or 36V solar panels, 36V batteries. The inverter can be widely used in residential or commercial areas for turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter. Step 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. Plug Type: US Standard. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50V. Maximum DC Short Circuit Current: 40A. Maximum Input Operating Current: 30A. Output Peak Power: 700watt. Rated Output Power: 650watt. Rated Output Current: 6.36A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Number of Circuit Connections Per String: 6. Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 2.48kg/5.47lbs. Net Weight: 1.63kg/3.59lbs. Product Size: 21.35.825cm/8.392.289.84inch. Package Size: 342411.5cm/13.399.454.53inch. 1 Solar Grid Tie Micro Inverter. Other Accessories for Installation. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Applicable to 30V or 36V solar panels, 36V batteries. LCD Display, Digital Control, Electrical Isolation, Safety Guard, Flexible Installation Mode, Small Footprint. Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Number of Circuit Connections Per String. Reverse Transmission, Load Priority. 21.35.825cm/8.392.289.84inch. Solar Grid Tie Micro Inverter.

Category: solar | Comments Off

June 10

600With110Vac Solar Inverter Grid Tie MPPT Micro Inverter APP Control with Display

PWM 10-60A 12V 24V 48V Solar Charge Controller For Lifepo4 Lead Acid Gel Battery. Solar Photovoltaic Charge Controller 10A 12V Solar Panel Battery Controller Blue. 30-60A 12V/24V Solar Panel Battery Regulator Charge Controller 4-Stage Dual USB. MPPT AUTO Dual USB Wind Solar Hybrid Charge Controller Charger 12V-60V E. 12V-60V 30A-100A MPPT Dual USB Charge Wind-Solar Hybrid System Controller AUTO E. Solar Photovoltaic Charge Controller 12V Solar Panel Battery Controller Black UE. 600W/110Vac Solar Inverter Grid Tie MPPT Micro Inverter 22-50V APP Control UE. PWM 30A Solar Battery Regulator Charge Controller 12V 24V 4-Stage Dual USB. Solar Photovoltaic Charge Controller PWM 10A 12V Solar Panel Battery Controller. 30A PWM AUTO Solar Charge Controller Charger 12V/24V Dual USB with LCD Display E. 50A 12V 24V 48V Solar Charge Controller With Wifi Monitor PWM LCD Regulator USA. 30A MPPT AUTO Dual USB Wind Solar Hybrid Charge Controller Charger 12V-60V E. Solar Photovoltaic Charge Controller 30A 12V Solar Panel Battery Controller Blue. PWM 30A Solar Charge Controller PV Regulator For Lifepo4 Lithium Lead Acid Gel U. Solar Panel Regulator MPPT Dual USB 12V-24V Auto Focus Charge Controller 30A UE. Solar Photovoltaic Charge Controller PWM 40A 12V Solar Panel Battery Controller. MPPT PWM Solar Charge Controller Charger 12V/24V/48V with Color LCD Display US. Solar Photovoltaic Charge Controller 40A 12V Solar Panel Battery Controller Blue. 12V-24V 20-60A PWM Solar Charge Controller Dual USB Interface LCD Display Solar. PWM 40A 12V 24V 48V Solar Charge Controller For Lifepo4 Lead Acid Gel Battery US. PWM 10A 12V 24V 48V Solar Charge Controller For Lifepo4 Lead Acid Gel Battery. PWM 10A 20A 30A Solar Charge Controller Regulator For Lifepo4 Lithium Lead Acid. MPPT 100A Solar Panel Charge Controller Auto Focus Dual USB 12V-24V Regulator US. Solar Charge Controller PWM 10A-50A 12V Solar Panel Battery Control Adapter UE. 20-60A MPPT Solar Charge Controller Charger 12V/24V/48V with Color LCD Display E. 10A PWM Solar Panel Battery Regulator Charge Controller LCD Dual USB 12V/24V UE. Solar Photovoltaic Charge Controller 50A 12V Solar Panel Battery Controller Blue. Solar Photovoltaic Charge Controller 20A 12V Solar Panel Battery Controller Blue. 30A PWM Solar Panel Battery Regulator Charge Controller LCD Dual USB 12V/24V UE. Solar Photovoltaic Charge Controller PWM 30A 12V Solar Panel Battery Controller. SAFE & SECURE SHOPPING. Cell & Pad Accessories. Musical Instruments & Gear. Clothing, Shoes & Accessories. 600W/110Vac Solar Inverter Grid Tie MPPT Micro Inverter APP Control with Display. 600W/110Vac IP65 Waterproof Solar Inverter Grid Tie MPPT Micro Inverter with Display. This product is of EU Plug, please make sure you don’t mind before purchasing. Built-in high-precision automatic power point tracking (Maximum PowerPoint Tracking referred to as MPPT) Powerful MPPT algorithm to optimize power collection from solar panels, which can accurately capture and lock the maximum output power point, so that the power generation can be greatly increased to more than 25%; 2. Reverse power transmission High-efficiency power reverse transmission technology, one of the patented technologies, when the inverter is in the grid-connected output mode, the power is transmitted in the reverse direction, and the load in the circuit is automatically detected and used first. Only when the electricity cannot be used up is it transmitted to the power grid in the reverse direction and supplied to other places for use, and the power transmission rate can reach 99.9%. Higher output efficiency in photovoltaic power generation application systems; 3. Output pure sine wave Use SPWM to directly generate pure sine wave output; 1. Output waveform: use complementary PWM to push and avoid, pure sine wave; 2. Generation method: enhanced high-speed SPWM; 4. Full digital control The charging module adopts intelligent soft switching technology and has built-in MCU; The inverter module adopts high-frequency switching power supply technology and 32-bit DSP full-digital SPWM control technology, which has the characteristics of strong anti-interference ability, fast operation speed and high degree of intelligence. High precision and output waveform quality; 5. Grid-connected stacking mode In grid-connected stacking mode, any number of inverters can be stacked in parallel when used in grid-connected mode. Off-grid stacking mode, when the inverter is used off-grid, any number of inverters can be stacked in parallel. The system sends out the main control signal and the inverter receives the main control signal and outputs it synchronously; 6. Electrical isolation The output and input of the system are completely electrically isolated, and the insulation performance of the entire power distribution system is good. The fully isolated booster circuit is safer and more reliable to use; 7. Miniaturization High frequency; micro, high frequency processing, miniaturization, smaller and lighter; 8. Protection function Over temperature protection, under voltage alarm, under voltage protection, over voltage protection, short circuit protection, overload protection functions; 9. Flexible installation Multiple inverters can be stacked arbitrarily, a single-phase parallel stacking system can be formed, or a three-phase system can be easily formed to provide three-phase AC power; 10. Simplify maintenance work (user-maintained) After the installation of the power station, almost no maintenance work is required, and the dust on the photovoltaic panel can be cleared after a long time; Specifications: Inverter Model:600W/110Vac MPPT Voltage Range:22-45V Operation Voltage Range:22V-50V Maximum Input Voltage:50V Startup Voltage:22V Maximum Input Power:2300W Recommended Using Solar Panels:2X300W, Voc:36-50V AC Rated Volt Range: 110V Rated Output Power:550W Maximum Output Power:600W Default Output Voltage Range:90-160VAC Nominal Output Frequency:47-52.5Hz /57-62.5Hz Maximum Units per Branch:5 units(single phase) Waterproof Grade:IP65 Communication:433/462MHz wireless communication (Does not contain a communication box) Package Included: 1x micro inverter 1x manual(English) 1x bag screw 1x 1 meter M25 male cable 1x EU plug AC power cable with Display. My goal is to make sure you are a happy customer and pleasant shopping with us. Sometimes shiping time may has a little delay, such as Bad wether, Holidays. We stand behind everything that we sell and will do everything possible to assure you are satisfied. Buyers are responsible for the postal cost of returning the items. We must be notified of the intent to return your item within 30 days of receiving the item. 1, Please ask us for return address. We strive to answer all questions and resolve any problems as quickly as possible.

Category: 600with110vac | Comments Off

June 9

Waterproof Solar Micro Inverter 1400W Grid Tie MPPT Pure Sine Wave DC to AC 110V

Specification Model: WVC-1400W Color: Silver Material: Aluminium Alloy Power: 1400W Voltage: 110V Plug Type: US Standard Maximum Input DC Voltage: 54V Peak Power Tracking Voltage: 22-45V Operating Voltage Range: 17-50V Min/Max Start-up Voltage: 22-50V Maximum DC Short Circuit Current: 80A Maximum Input Operating Current: 58A Output Peak Power: 1400watt Rated Output Power: 1350watt Rated Output Current: 12.8A Rated Voltage Range: 80-160VAC Rated Frequency Range: 57-62.5Hz Power Factor: >99% Number of Circuit Connections Per String: 3 Static MPPT Efficiency: 99.5% Maximum Output Efficiency: 91.2% Night Time Power Loss. Solar Micro Inverter 1400W Grid Tie MPPT Pure Sine Wave DC to AC 110V Waterproof. Solar Micro Inverter 1400W Grid Tie MPPT Pure Sine Wave Waterproof. Plug Type: US Standard. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50V. Maximum DC Short Circuit Current: 80A. Maximum Input Operating Current: 58A. Output Peak Power: 1400watt. Rated Output Power: 1350watt. Rated Output Current: 12.8A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Number of Circuit Connections Per String: 3. Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 4.2kg/9.26lbs. Net Weight: 3kg/6.61lbs. Product Size: 2137.44cm/8.2714.721.57inch. Package Size: 483512cm/18.913.784.72inch. Can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This microinverter makes it easier. Made of fine aluminum. Wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. The inverter is made of aluminum alloy, which is durabl. E, corrosion-resistant, and n. Ot easy to rust. You can use it for a long time without frequent replacement, and your cost can be saved. The product adopts a unique circuit design, imported industrial electronic components, isolated high-frequency transformer, and unique MPPT technology, with efficiency greater than 99%, so it can achieve sensitive response and more stable maximum power point locking. The inverter adopts intelligent. Soft switching technology, high-frequency switching power supply technology, and 32-bit DSP full digital SPWM control technology, making the product strong anti-interference abili. Ty, fast operation speed, high intelligence, and a powerful functional system, which can meet the needs of users. The output and input of the system are completely electrically isolated, the insulation performance of the entire power distribution system is good, and the fully isolated booster circuit is safer and more reliable. Good Heat Dissipation Effect. The product adopts a self-cooling system and is designed with heat dissipation holes, which can timely reduce the temperature during operation, reduce potential safety hazards and extend the applicable life of the product. The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. N can prevent rain from eroding its surface, so. You can use it with confidence. After the installation of the power station, you don’t need to do maintenance work. After a long period of use, you only need to remove the dust from the photovoltaic panel. With a size of. 8.271.5714.72inch. The inverter adopts high-frequency telephone, micro processing, and other technologies, so it is smaller, lighter, and won’t occupy too much space. During installation, you can stack multiple inverters at will, form a single-phase parallel stacking system, or conveniently form a three-phase system to provide a three-phase AC. At the same time, we also provide a detailed manual and various accessories. You just need to follow the steps to install them. The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. The corners of this product are very round, which can effectively reduce your skin scratches during installation or movement. The product uses an LED indicator, which mainly has two colors: red light and green light. You can master the product situation in time according to the color and flicker of the light, which is very convenient. This product is applicable to 30V or 36V solar panels, or 36V batteries. The inverter can be widely used in residential or commercial areas, power stations, and schools for turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter. Step 3: Open t. Er of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. 1 Solar Grid Tie Micro Inverter. Other Accessories for Installation. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please note that connected solar panels, batteries, or wind generators DC input DC power supply cable. Please note that this inverter does not have a monitoring function. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Reverse Power Transmission, Pure Sine Wave, High-quality Material. Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Number of Circuit Connections Per String. Reverse Transmission, Load Priority. 2137.44cm/8.2714.721.57inch. 483512cm/18.913.784.72inch.

Category: waterproof | Comments Off

June 9

400With120V IP60 Waterproof Solar Inverter Grid Tie MPPT Micro w Display US

PWM 30A Solar Charge Controller PV Regulator For Lifepo4 Lithium Lead Acid Gel U. 30-60A 12V/24V Solar Panel Battery Regulator Charge Controller 4-Stage Dual USB. PWM 12V 24V Solar Charge Controller Regulator For Lifepo4 Lead Acid Gel Battery! MPPT AUTO Dual USB Wind Solar Hybrid Charge Controller Charger 12V-60V E. 12V-60V 30A-100A MPPT Dual USB Charge Wind-Solar Hybrid System Controller AUTO E. Solar Photovoltaic Charge Controller 10A 12V Solar Panel Battery Controller Blue. PWM 10-60A 12V 24V 48V Solar Charge Controller For Lifepo4 Lead Acid Gel Battery. Solar Photovoltaic Charge Controller 12V Solar Panel Battery Controller Black UE. PWM 30A Solar Battery Regulator Charge Controller 12V 24V 4-Stage Dual USB. 12V-60V 100A MPPT Dual USB Charge Wind-Solar Hybrid System Controller Auto E. Solar Photovoltaic Charge Controller 20A 12V Solar Panel Battery Controller Blue. Solar Photovoltaic Charge Controller PWM 40A 12V Solar Panel Battery Controller. 20A PWM Solar Panel Battery Regulator Charge Controller LCD Dual USB 12V/24V UE. 700W/110Vac Solar Inverter Grid Tie MPPT Micro Inverter APP Control with Display. 20-60A MPPT Solar Charge Controller Charger 12V/24V/48V with Color LCD Display E. 12/24/48V 20A MPPT Solar Charge Controller Panel Battery Regulator Dual USB E. PWM 10A 20A 30A Solar Charge Controller Regulator For Lifepo4 Lithium Lead Acid. 600W/230Vac Solar Inverter Grid Tie MPPT Micro Inverter 22-50V APP Control UE. 10A PWM Solar Panel Battery Regulator Charge Controller LCD Dual USB 12V/24V UE. 60A Solar Panel Battery Regulator Charge Controller PWM LCD Dual USB 12V/24V UE. 60A MPPT Solar Panel Regulator Charge Controller 12V/24V Auto Focus Tracking USA. 12V/24V/36V/48V/60V 60A MPPT Wind Solar Hybrid Charge Controller Panel Dual E. 700W/230Vac Solar Inverter Grid Tie MPPT Micro Inverter 22-50V APP Control UE. PWM 12V 24V Solar Charge Controller Regulator For Lifepo4 Lead Acid Gel Battery#. Solar Panel Regulator MPPT Dual USB 12V-24V Auto Focus Charge Controller 30A UE. MPPT AUTO Solar Charge Controller Charger 12V/24V/48V with Color LCD Display E. Solar Photovoltaic Charge Controller PWM 50A 12V Solar Panel Battery Controller. Solar Photovoltaic Charge Controller 50A 12V Solar Panel Battery Controller Blue. 50A 12V 24V 48V Solar Charge Controller With Wifi Monitor PWM LCD Regulator USA. 10A/20A/30A PWM Solar Panel Regulator Charge Controller LCD Dual USB 12V/24V UE. SAFE & SECURE SHOPPING. Cell & Pad Accessories. Musical Instruments & Gear. Clothing, Shoes & Accessories. 400W/120V IP60 Waterproof Solar Inverter Grid Tie MPPT Micro w Display US. 400W/120Vac IP60 Waterproof Solar Inverter Grid Tie MPPT Micro Inverter Note: This product is of EU Plug, please make sure you don’t mind before purchasing. Solar panel input, AC output to the grid to realize the power generation function. DC input range 17-50V, 220V grid voltage 180-260VAC, frequency range 47-52.5Hz; 110V grid voltage 80-160VAC, frequency range 57-62.5Hz. Output pure sine wave, fully match with the power grid, realize high-efficiency and low-consumption conversion mode, and low heat generation. The company’s patented high-efficiency automatic power point tracking MPPT technology, reverse power transmission. The input and output are completely isolated to ensure the safety of power consumption. High reliability Multiple parallel stacked power generation, easy installation and maintenance, high-efficiency and flexible solar panels are matched with the usable area. Panel parameter display function, the display panel and the radiator can be separated and matched perfectly, with a unique and beautiful appearance. Model AC220V or AC110V can be used consistent with the voltage used in the region. Only professional personnel can install and maintain the equipment. Strictly according to the inverter installation guide operation, installed in a well-ventilated, avoid rain, exposure, high temperature, damp place, and remove the surrounding flammable and explosive items. Do not soak in water, do not wash with water. My goal is to make sure you are a happy customer and pleasant shopping with us. Sometimes shiping time may has a little delay, such as Bad wether, Holidays. We stand behind everything that we sell and will do everything possible to assure you are satisfied. Buyers are responsible for the postal cost of returning the items. We must be notified of the intent to return your item within 30 days of receiving the item. 1, Please ask us for return address. We strive to answer all questions and resolve any problems as quickly as possible.

Category: 400with120v | Comments Off

June 8

600W Solar Grid Tie Micro Inverter Solar Microinverter Full-Digital LCD-Display

IP65 Waterproof Microinverter 600W Solar Grid Tie Micro Inverter for Solar Panel Description This microinverter can efficiently turn sunlight into clean and green power. The IP65 waterproof design and aluminum construction make it last longer. And it has a display that allows you to clearly see the machine in action. Its powerful output efficiently produces electricity for you to use. Application This product is applicable to 30V or 36V solar panels, 36V batteries. It can be used in residential and small commercial environments. It is suitable for various household appliances. It can convert the DC power generated by solar panels into AC power available for household appliances. 600W Solar Grid Tie Micro Inverter LCD-Display Solar Microinverter Full-Digital. IP65 Waterproof Microinverter 600W Solar Grid Tie Micro Inverter for Solar Panel. This microinverter can efficiently turn sunlight into clean and green power. High-quality Material: The microinverter is made of aluminum alloy, which is durable, corrosion-resistant, and not easy to rust. You can use it for a long time without frequent replacement. Reverse Power Transmission: This item adopts highly efficient reverse power transmission technology, in which the power is transmitted in the reverse direction when in grid-connected output mode, automatically detecting the load in the circuit and giving priority to its use, making the output more efficient in photovoltaic power generation application systems. Maximum Power Point Tracking: A powerful maximum power point tracking algorithm to optimize power harvesting from solar panels that precisely captures and targets the maximum output power point, resulting in a significant increase in power generation. Electrical Isolation: The complete electrical isolation of the machine’s output and input makes the entire power distribution system well insulated and the use of fully isolated boost circuits makes it safer and more reliable to use. Six-fold Protection: The product comes with over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short-circuit protection, and overload protection, so you can use it with confidence. Flexible Installation: This inverter can be stacked in any number of units, forming a single-phase parallel stacking system or easily forming a three-phase system to provide three-phase AC power, which you can install according to your specific needs. Easy Maintenance: Once installed, this machine requires little maintenance and only needs to be cleaned of dust from the PV panels. HD Display: This microinverter is equipped with an LCD display screen to monitor voltage, power, frequency, current, etc. So you can see the machine clearly in operation. Good Waterproof Performance: IP65 waterproof design and aluminum alloy material can effectively prevent rain from eroding the surface, you can use it with confidence. Environmentally Friendly : This micro-inverter converts the direct current generated by the solar panels into alternating current and provides a continuous source of energy that is environmentally friendly and pollution-free. Small Footprint: With dimensions of just 21.35.825cm/8.392.289.84inch, this micro-inverter does not take up much space and can be installed in even small shops. Full Digital Control: The machine adopts full digital control technology, which makes the machine have a strong anti-interference ability, fast computing speed, and a high degree of intelligence. Its powerful functional system can meet your usage needs. It is our pleasure to answer your confusion and questions. Fixed Gasket&Washer: The gasket and washer in the package help you to mount the PV bracket with great ease. Heat Dissipation Holes: The inverter body has multiple heat dissipation holes, which help the machine to dissipate heat and enable it to run smoothly. This product is applicable to 30V or 36V solar panels, 36V batteries. Install the inverter on the bracket of the photovoltaic panel with the screws provided by the machine. Connect the positive and negative poles of the DC connection plug on the photovoltaic board to the DC input terminal of the inverter. Open the waterproof cover of the AC output connector of the inverter and connect the AC cable to the AC waterproof plug. Connect the AC output cable to the AC main cable. Repeat steps 1 to 3, install and connect all inverters. Connect the AC main cable to the utility grid to start your green energy journey. Operating Temperature Range: -40? VOC Voltage Range: 36-48V. Maximum Output DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Startup Voltage: 22-50V. Maximum DC Short Circuit Current: 40A. Maximum Input Operating Current: 27.2A. Peak Output Power: 600W. Rated Output Power: 550W. Rated Output Current: 4.58A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Static MPPT Efficiency: 99.5%. Output Efficiency: 91.2%. Recommended Battery Parameters: 36V/20mah. Gross Weight: 2.48kg/5.47lbs. Net Weight: 1.63kg/3.59lbs. Product Size: 21.35.825cm/8.392.289.84inch. Package Size: 342411.5cm/13.399.454.53inch. 1 AC Connection Cable. Other Accessories for Installation. Please read the operating manual completely before use. And pay particular attention to the safety instructions included. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is36V/20mah for 600W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please do not dismantle the inverter by non-specialists, only qualified service personnel should repair this product. Please install the inverter in a place with low humidity, good ventilation and cool places to avoid overheating the inverter and remove flammable and explosive materials from the surrounding area. When using this product, avoid children touching and playing with it to avoid electric shock. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Compact Design, Unique Appearance, high reliability. Maximum Output DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. 21.35.825cm/8.392.289.84inch.

Category: 600w | Comments Off

June 8

110-230V Useful Grid Tie Inverter Inverter Solar Inverter WiFi Control

Safe to use: The inverter can control each component independently of each other, minimising potential safety risks and preventing accidents. The inverter can be installed directly behind the module or on a bracket to simplify user maintenance. WiFi / app control: the inverter solar grid tie can be operated and monitored via WiFi or mobile app, which can significantly improve overall efficiency. High accuracy: can be operated and monitored via WiFi or mobile app, which is convenient to use and significantly improves overall work efficiency. The solar inverter has a high-precision instrument built-in, you can see the working status of each component, which is efficient and durable Single-phase output, Flexible 3-phase PV systems Integrated AC bus cable, Ready-To-Use Low cost, Easy installation Isolated Island Protection, Voltage Protection, Frequency Protection, Temperature Protection, Current Protection, etc. Matters needing attention. Use photovoltaic panel(s) ONLY connect to this equipment. This equipment is ON-GRID Microinverter, To make it work properly, it must be connected to the power grid correctly, and the power grid is working properly, When the power grid stopped working, it will also stop generating. Do NOT exceed PV panel(s) voltage over the inverter max input voltage. Do NOT exceed PV panel(s) power over the inverter max input power. DC voltage sources are pass through this equipment. Each circuit must be individually disconnected before servicing. Do NOT cover other items on this equipment. Do NOT remove the lid. Servicing must be performed by qualified service personnel. When PV array is exposed to light, it supples DC voltage to this equipment. Install away from direct sunlight and direct rain exposure. Please kindly note that. Also, the each additional item means. The the same color and size. Transit time may be a little delayed because of the. If you have any questions.

Category: 110-230v | Comments Off

June 7

600With700W Solar Inverter Grid Tie MPPT Micro Inverter APP Control with Display

PWM 10-60A 12V 24V 48V Solar Charge Controller For Lifepo4 Lead Acid Gel Battery. Solar Photovoltaic Charge Controller 10A 12V Solar Panel Battery Controller Blue. 12V-60V 30A-100A MPPT Dual USB Charge Wind-Solar Hybrid System Controller AUTO E. Solar Photovoltaic Charge Controller 12V Solar Panel Battery Controller Black UE. 30-60A 12V/24V Solar Panel Battery Regulator Charge Controller 4-Stage Dual USB. MPPT AUTO Dual USB Wind Solar Hybrid Charge Controller Charger 12V-60V E. Solar Photovoltaic Charge Controller PWM 12V Solar Panel Battery Controller Blue. 10A/20A/30A PWM Solar Panel Regulator Charge Controller LCD Dual USB 12V/24V UE. 12V/24V/36V/48V/60V 60A MPPT Wind Solar Hybrid Charge Controller Panel Dual E. 40A MPPT Solar Panel Regulator Charge Controller 12V/24V Auto Focus Tracking US. 700W/110Vac Solar Inverter Grid Tie MPPT Micro Inverter APP Control with Display. PWM 12V 24V Solar Charge Controller Regulator For Lifepo4 Lead Acid Gel Battery! PWM 50A Solar Battery Regulator Charge Controller 12V 24V 4-Stage Dual USB. 60A PWM AUTO Solar Charge Controller Charger Regulators 12V/24V with LCD Display. 12V-60V 100A MPPT Dual USB Charge Wind-Solar Hybrid System Controller Auto E. 30A MPPT AUTO Solar Charge Controller Charger 12V/24V/48V with Color LCD E. 60A Solar Panel Battery Regulator Charge Controller PWM LCD Dual USB 12V/24V UE. PWM 30A 12V 24V 48V Solar Charge Controller For Lifepo4 Lead Acid Gel Battery. 600W/110Vac Solar Inverter Grid Tie MPPT Micro Inverter 22-50V APP Control UE. PWM 30A Solar Battery Regulator Charge Controller 12V 24V 4-Stage Dual USB. Solar Photovoltaic Charge Controller PWM 10A 12V Solar Panel Battery Controller. 30A PWM AUTO Solar Charge Controller Charger 12V/24V Dual USB with LCD Display E. 50A 12V 24V 48V Solar Charge Controller With Wifi Monitor PWM LCD Regulator USA. 30A MPPT AUTO Dual USB Wind Solar Hybrid Charge Controller Charger 12V-60V E. Solar Photovoltaic Charge Controller 30A 12V Solar Panel Battery Controller Blue. PWM 30A Solar Charge Controller PV Regulator For Lifepo4 Lithium Lead Acid Gel U. 600W/110Vac Solar Inverter Grid Tie MPPT Micro Inverter APP Control with Display. Solar Panel Regulator MPPT Dual USB 12V-24V Auto Focus Charge Controller 30A UE. Solar Photovoltaic Charge Controller PWM 40A 12V Solar Panel Battery Controller. Solar Photovoltaic Charge Controller 40A 12V Solar Panel Battery Controller Blue. SAFE & SECURE SHOPPING. Cell & Pad Accessories. Musical Instruments & Gear. Clothing, Shoes & Accessories. 600W/700W Solar Inverter Grid Tie MPPT Micro Inverter APP Control with Display. 600W/700W IP65 Waterproof Solar Inverter Grid Tie MPPT Micro Inverter with Display 110Vac/230Vac. This product is of EU Plug, please make sure you don’t mind before purchasing. Built-in high-precision automatic power point tracking (Maximum PowerPoint Tracking referred to as MPPT) Powerful MPPT algorithm to optimize power collection from solar panels, which can accurately capture and lock the maximum output power point, so that the power generation can be greatly increased to more than 25%; 2. Reverse power transmission High-efficiency power reverse transmission technology, one of the patented technologies, when the inverter is in the grid-connected output mode, the power is transmitted in the reverse direction, and the load in the circuit is automatically detected and used first. Only when the electricity cannot be used up is it transmitted to the power grid in the reverse direction and supplied to other places for use, and the power transmission rate can reach 99.9%. Higher output efficiency in photovoltaic power generation application systems; 3. Output pure sine wave Use SPWM to directly generate pure sine wave output; 1. Output waveform: use complementary PWM to push and avoid, pure sine wave; 2. Generation method: enhanced high-speed SPWM; 4. Full digital control The charging module adopts intelligent soft switching technology and has built-in MCU; The inverter module adopts high-frequency switching power supply technology and 32-bit DSP full-digital SPWM control technology, which has the characteristics of strong anti-interference ability, fast operation speed and high degree of intelligence. High precision and output waveform quality; 5. Grid-connected stacking mode In grid-connected stacking mode, any number of inverters can be stacked in parallel when used in grid-connected mode. Off-grid stacking mode, when the inverter is used off-grid, any number of inverters can be stacked in parallel. The system sends out the main control signal and the inverter receives the main control signal and outputs it synchronously; 6. Electrical isolation The output and input of the system are completely electrically isolated, and the insulation performance of the entire power distribution system is good. The fully isolated booster circuit is safer and more reliable to use; 7. Miniaturization High frequency; micro, high frequency processing, miniaturization, smaller and lighter; 8. Protection function Over temperature protection, under voltage alarm, under voltage protection, over voltage protection, short circuit protection, overload protection functions; 9. Flexible installation Multiple inverters can be stacked arbitrarily, a single-phase parallel stacking system can be formed, or a three-phase system can be easily formed to provide three-phase AC power; 10. Simplify maintenance work (user-maintained) After the installation of the power station, almost no maintenance work is required, and the dust on the photovoltaic panel can be cleared after a long time; 600W 110V: Inverter Model:600W/110Vac MPPT Voltage Range:22-45V Operation Voltage Range:22V-50V Maximum Input Voltage:50V Startup Voltage:22V Maximum Input Power:2300W Recommended Using Solar Panels:2X300W, Voc:36-50V AC Rated Volt Range: 110V Rated Output Power:550W Maximum Output Power:600W Default Output Voltage Range:90-160VAC Nominal Output Frequency:47-52.5Hz /57-62.5Hz Maximum Units per Branch:5 units(single phase) Waterproof Grade:IP65 Communication:433/462MHz wireless communication (Does not contain a communication box) 600W 230V: Inverter Model:600W/230Vac MPPT Voltage Range:22-45V Operation Voltage Range:22V-50V Maximum Input Voltage:50V Startup Voltage:22V Maximum Input Power:2300W Recommended Using Solar Panels:2X300W, Voc:36-50V AC Rated Volt Range: 230V Rated Output Power:550W Maximum Output Power:600W Default Output Voltage Range:190-260VAC Nominal Output Frequency:47-52.5Hz /57-62.5Hz Maximum Units per Branch:10 units(single phase) Waterproof Grade:IP65 Communication:433/462MHz wireless communication (Does not contain a communication box) 700W 110V: Inverter Model:700W/110Vac MPPT Voltage Range:22-45V Operation Voltage Range:22V-50V Maximum Input Voltage:50V Startup Voltage:22V Maximum Input Power:2350W Recommended Using Solar Panels:2X350W, Voc:36-50V AC Rated Volt Range: 110V Rated Output Power:650W Maximum Output Power:700W Default Output Voltage Range:90-160VAC Nominal Output Frequency:47-52.5Hz /57-62.5Hz Maximum Units per Branch:5 units(single phase) Waterproof Grade:IP65 Communication:433/462MHz wireless communication (Does not contain a communication box) 700W 230V: Inverter Model:700W/230Vac MPPT Voltage Range:22-45V Operation Voltage Range:22V-50V Maximum Input Voltage:50V Startup Voltage:22V Maximum Input Power:2350W Recommended Using Solar Panels:2X350W, Voc:36-50V AC Rated Volt Range: 230V Rated Output Power:650W Maximum Output Power:700W Default Output Voltage Range:190-260VAC Nominal Output Frequency:47-52.5Hz /57-62.5Hz Maximum Units per Branch:10 units(single phase) Waterproof Grade:IP65 Communication:433/462MHz wireless communication (Does not contain a communication box) Package Included: Option1: 1x micro inverter 1x manual(English) 1x bag screw 1x 1 meter M25 male cable 1x 3 meter EU plug AC power cable Option2: 1x micro inverter 1x manual(English) 1x bag screw 1x 1 meter M25 male cable 1x EU plug AC power cable with Display. My goal is to make sure you are a happy customer and pleasant shopping with us. Sometimes shiping time may has a little delay, such as Bad wether, Holidays. We stand behind everything that we sell and will do everything possible to assure you are satisfied. Buyers are responsible for the postal cost of returning the items. We must be notified of the intent to return your item within 30 days of receiving the item. 1, Please ask us for return address. We strive to answer all questions and resolve any problems as quickly as possible.

Category: 600with700w | Comments Off

June 7

Dead Grid Tie Inverter

Category: dead | Comments Off

June 6

Solar Micro Inverter 1200W Grid Tie MPPT Pure Sine Wave DC to AC 22-50VDC 110V

Solar Micro Inverter 1200W Grid Tie MPPT Pure Sine Wave DC to AC 22-50VDC 110V. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. An inverter can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This micro inverter makes it easier. Made of fine aluminum alloy, this IP65 waterproof inverter has a wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. The inverter is made of aluminum alloy, which is durable, corrosion-resistant, and not easy to rust. You can use it for a long time without frequent replacement, and your cost can be saved. The inverter has built-in high-precision maximum power point tracking, which can optimize the power collection from the solar panel, accurately capture and lock the maximum output power point, and greatly increase power generation to more than 25%. In addition, the efficient power reverse transmission technology can transmit the power that can not be used up to the grid in the reverse direction to other places for use, and the power transmission rate can reach 99.9%. The inverter is equipped with an LCD display screen to monitor voltage, power, frequency, current, etc. So you can see the machine clearly in operation. The inverter adopts intelligent soft switching technology, high-frequency switching power supply technology, and 32-bit DSP full digital SPWM control technology, making the product strong anti-interference ability, fast operation speed, high intelligence, and a powerful functional system, which can meet the needs of users. The output and input of the system are completely electrically isolated, the insulation performance of the entire power distribution system is good, and the fully isolated booster circuit is safer and more reliable. The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. Besides, the IP65 waterproof design can prevent rain from eroding its surface, so you can use it with confidence. After the installation of the power station, you don’t need to do maintenance work. After a long time, you only need to remove the dust on the photovoltaic panel. Ith a size of 8.2714.721.57inch, the inverter adopts high-frequency telephone, micro processing, and other technologies, so it is smaller, lighter, and won’t occupy too much space. During installation, you can stack multiple inverters at will, form a single-phase parallel stacking. System, or conveniently form a three-phase system to provide a three-phase AC. We have been working hard to provide better service and quality for our customers, which is our goal. If there is any quality problem with our inverters. The inverter is equipped with two gaskets to help you install the photovoltaic support, making th. E inverter more stable. The inverter is provided with heat dissipation holes, which can play a good role in heat dissipation and prolong the service life of the inverter. This product is applicable to 30V or 36V solar panels, 36V batteries. The inverter can be widely used in residential or commercial areas for turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter. Step 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. Plug Type: US Standard. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50VDC. Maximum DC Short Circuit Current: 80A. Maximum Input Operating Current: 54.4A. Peak Power Output: 1200watt. Rated Output Power: 1150watt. Rated Output Current: 9.58A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Max Unit Per Branch Circut: 3pcs(Single-phase). Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 4.08kg/8.99lbs. Net Weight: 2.88kg/6.35lbs. Product Size: 2137.44cm/8.2714.721.57inch. Package Size: 47.53411.5cm/18.713.394.53inch. Other Accessories for Installation. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. 1200W Grid Tie Inverter. MPPT (Maximum Power Point Tracking). Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Max Unit Per Branch Circut. Reverse Transmission, Load Priority. 2137.44cm/8.2714.721.57inch. 47.53411.5cm/18.713.394.53inch. 10 A or Less.

Category: solar | Comments Off

June 5

Waterproof Solar Micro Inverter Grid Tie MPPT Pure Sine Wave DC to AC 110V 1400W

Specification Model: WVC-1400W Color: Silver Material: Aluminium Alloy Power: 1400W Voltage: 110V Plug Type: US Standard Maximum Input DC Voltage: 54V Peak Power Tracking Voltage: 22-45V Operating Voltage Range: 17-50V Min/Max Start-up Voltage: 22-50V Maximum DC Short Circuit Current: 80A Maximum Input Operating Current: 58A Output Peak Power: 1400watt Rated Output Power: 1350watt Rated Output Current: 12.8A Rated Voltage Range: 80-160VAC Rated Frequency Range: 57-62.5Hz Power Factor: >99% Number of Circuit Connections Per String: 3 Static MPPT Efficiency: 99.5% Maximum Output Efficiency: 91.2% Night Time Power Loss. Waterproof Solar Micro Inverter Grid Tie MPPT Pure Sine Wave DC to AC 110V 1400W. Solar Micro Inverter 1400W Grid Tie MPPT Pure Sine Wave Waterproof. Plug Type: US Standard. Maximum Input DC Voltage: 54V. Peak Power Tracking Voltage: 22-45V. Operating Voltage Range: 17-50V. Min/Max Start-up Voltage: 22-50V. Maximum DC Short Circuit Current: 80A. Maximum Input Operating Current: 58A. Output Peak Power: 1400watt. Rated Output Power: 1350watt. Rated Output Current: 12.8A. Rated Voltage Range: 80-160VAC. Rated Frequency Range: 57-62.5Hz. Number of Circuit Connections Per String: 3. Static MPPT Efficiency: 99.5%. Maximum Output Efficiency: 91.2%. Night Time Power Loss. Communication Mode: Power Line Carrier. Power Transmission Mode: Reverse Transmission, Load Priority. Gross Weight: 4.2kg/9.26lbs. Net Weight: 3kg/6.61lbs. Product Size: 2137.44cm/8.2714.721.57inch. Package Size: 483512cm/18.913.784.72inch. Can efficiently turn the direct current generated by solar panels into the alternating current used by household appliances. This microinverter makes it easier. Made of fine aluminum. Wide range of functions, good safety, convenient installation, and high-cost performance. We believe this inverter will not disappoint you. The inverter is made of aluminum alloy, which is durabl. E, corrosion-resistant, and n. Ot easy to rust. You can use it for a long time without frequent replacement, and your cost can be saved. The product adopts a unique circuit design, imported industrial electronic components, isolated high-frequency transformer, and unique MPPT technology, with efficiency greater than 99%, so it can achieve sensitive response and more stable maximum power point locking. The inverter adopts intelligent. Soft switching technology, high-frequency switching power supply technology, and 32-bit DSP full digital SPWM control technology, making the product strong anti-interference abili. Ty, fast operation speed, high intelligence, and a powerful functional system, which can meet the needs of users. The output and input of the system are completely electrically isolated, the insulation performance of the entire power distribution system is good, and the fully isolated booster circuit is safer and more reliable. Good Heat Dissipation Effect. The product adopts a self-cooling system and is designed with heat dissipation holes, which can timely reduce the temperature during operation, reduce potential safety hazards and extend the applicable life of the product. The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. N can prevent rain from eroding its surface, so. You can use it with confidence. After the installation of the power station, you don’t need to do maintenance work. After a long period of use, you only need to remove the dust from the photovoltaic panel. With a size of. 8.271.5714.72inch. The inverter adopts high-frequency telephone, micro processing, and other technologies, so it is smaller, lighter, and won’t occupy too much space. During installation, you can stack multiple inverters at will, form a single-phase parallel stacking system, or conveniently form a three-phase system to provide a three-phase AC. At the same time, we also provide a detailed manual and various accessories. You just need to follow the steps to install them. The inverter is equipped with two gaskets to help you install the photovoltaic support, making the inverter more stable. The corners of this product are very round, which can effectively reduce your skin scratches during installation or movement. The product uses an LED indicator, which mainly has two colors: red light and green light. You can master the product situation in time according to the color and flicker of the light, which is very convenient. This product is applicable to 30V or 36V solar panels, or 36V batteries. The inverter can be widely used in residential or commercial areas, power stations, and schools for turning the direct current generated by solar panels into alternating current. Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine. Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter. Step 3: Open t. Er of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug. Step 4: Connect the AC output cable to the AC main cable. Step 5: Repeat steps 1 to 3 to install and connect all inverters. Step 6: Connect the AC main cable to the public grid and start your green energy journey. 1 Solar Grid Tie Micro Inverter. Other Accessories for Installation. Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel. Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter. Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives. When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock. Please Reminderss that connected solar panels, batteries, or wind generators DC input DC power supply cable. Please Reminderss that this inverter does not have a monitoring function. Please Reminderss that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation. When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please Reminderss that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W. The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Maximum Input DC Voltage. Peak Power Tracking Voltage. Maximum DC Short Circuit Current. Maximum Input Operating Current. Number of Circuit Connections Per String. Reverse Transmission, Load Priority. 2137.44cm/8.2714.721.57inch. 483512cm/18.913.784.72inch.

Category: waterproof | Comments Off

June 2023
M	T	W	T	F	S	S
« May				Jul »
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30