Waterproof Micro Inverter 250W, Solar Inverter Grid Tie, Power Inverter 120/220VAC

Waterproof Micro Inverter 250W, Solar Inverter Grid Tie, Power Inverter 120/220VAC. THIS IS A NEW. WATERPROOF MICRO GRID TIE INVERTER. 120V OR 220V AC. GET ENERGY DIRECTLY FROM SOLAR PANEL. REDUCE YOUR POWER BILL! MY GOAL IS TO MAKE YOU A 100% SATISFIED CUSTOMER. If you have the problem with the inverter. Recommend the use of PV modules. Maximum input DC voltage. Peak power tracking voltage. Maximum DC short current. Maximum unit per branch circuit. Operating temperature range (inverter inside). Reverse transfer, load priority. DIN VDE 1026 UL1741. CEC, CE National patent technology. Red light 3 second—Red LED light 3 second while device starts , then in working condition; 2. Green flash fast—MPPT searching; 3. Green flash slow—MPPT + searching; 4. Red flash slow—MPPT – searching; 5. Green lights on 3s and off 0.5s—MPPT locked; 6. Over / low AC voltage protection, d. Over / low DC voltage protection; e. Fault Every item is tested before sending out. Waterproof micro inverter, one AC output wire without plug, one manual, one pack of installation accessories. Install behind the solar panel directly 2. Output connect to the gird power 3. Thank you for your understanding. Reason is because transit time is highly depended and provided by Postal Service (except weekends and holidays). All return items must be in their original condition. Please do contact with us for return address, details and any other issues. I do not think there is anything we cannot work out through our negotiation. My goal is to make sure you are a happy customer and pleasant shopping with us. Any questions will be reply within 24 hours except the weekend and statuary holiday in China. The item “Waterproof Micro Inverter 250W, Solar Inverter Grid Tie, Power Inverter 120/220VAC” is in sale since Wednesday, August 06, 2014. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “reliablepower” and is located in WENZHOU ZHEJIANG. This item can be shipped worldwide.

Brand: RELIABLE ELECTRIC
Model: WV-250W
MPN: Pure Sine Wave Inverter
Country/Region of Manufacture: China
Static MPPT efficiency: 99.5%
The average output efficiency: above 91%
Waterproof rating: IP65
Peak Output Power: 260Watt
Recomend Solar Panel: 300Wp

Category: waterproof | Comments Off

January 6

Pick One 12 V Solar Panel 1.5W, 6 W, 12 W, 40 W, 100 W, 110 W Fit GRID TIE INVERTER

Please choose one Greenergystar solar panel: 1.5W, 6W, 12W, 40W, 100W, 110W. 1.5W Polycrystalline Solar Panels. Open Circuit Voltage (Voc). Maximum Power Voltage (Vmp). Short Circuit Current (Isc). Maximum Power Currrent (Imp). ±5% (1.43W – 1.58W). 40’C to 80’C. 115 x 85 x 3mm. 6W Polycrystalline Solar Panels. ±5% (5.7W – 6.3W). 28.3 x 18.3 x 2.5cm 11.1 x 7.25 x 1 inches. 0.834kg, 1.83lbs. 12W Polycrystalline Solar Panels. ±5% (11.4W – 12.6W). 33.7 x 28.3 x 2.5cm 13.3 x 11.1 x 1 inches. 33.9 x 27.3 x 2.5cm 13.25 x 10.75 x 1 inches. 1.27kg, 2.67lbs. 40W Polycrystalline Solar Panels. ±5% (38W – 42W). 50 x 50 x 2.5 cm. 3.25kg, 7.17lbs. 100W Polycrystalline Solar Panels. ±3% (97W – 103W). Installed to box (about 0.8m). 1181 x 541 x 35mm 46.5 x 21.30 x 1.38 inches. 7.84kg, 17.28lbs. 110W Monocrystalline Solar Panels. ±5% (104.5W – 115.5W). Install to box (90cm). 120.5 x 55 x 3.5cm 47.4 x 21.7 x 1.4 inches. 8.4kg, 18.5lbs. Additional information about solar panels. Solar panel generates free energy for many general household appliance. These solar panels also specially designed for use in sailing boats, green houses, cars, radios, recreational vehicles, portable televisions, warning lights, flash lights, garden lights, house light, garage lights and ventilators for rooms and cars. They can also be installed into a grid-tie system. 6 – 8% (Low) efficiency. Panel size is huge because of low efficiency. Small Panel Size (1/2 of Amorphous). Heavy weighted (Hard to install). Light Weighted (Easy to install). Rectangular shaped cells (utilize all of the available surface area). Silicon solar cells – Enclosed with epoxy and high-quality resin material – Rain proof, rust proof and corrosive proof, protects against wind, rain, salt air and solar radiation. Improper installation, accident, misuse. Any unauthorized disassembly, repair, or modification. NO OPERATING COST GENERATES ELECTRICITY FROM THE ABUNDANT RESOURCE – SUNLIGHT. All pictures and descriptions are subjected to change without notice. We are not responsible for any inadvertent errors. E on 100W and 110W panels. For Address that UPS determined to be outside of their normal service area, they will charge an additional “extended area surcharge”. Items that are used/ damaged/ deformed or altered in any ways will not be accepted. Spams and mass e-mailing will be deleted without slightest glance. E-mails with virus or anything subjected to hacking are automatically deleted. The item “Pick One 12 V Solar Panel 1.5W, 6 W, 12 W, 40 W, 100 W, 110 W Fit GRID TIE INVERTER” is in sale since Thursday, February 16, 2012. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Solar Panels”. The seller is “hi_iq” and is located in Vancouver, British Columbia. This item can be shipped to United States, to Canada.
Pick One 12 V Solar Panel 1.5W, 6 W, 12 W, 40 W, 100 W, 110 W Fit GRID TIE INVERTER

Category: pick | Comments Off

January 5

USA 1000W 1000 Watt Solar Grid Tie Inverter DC 22V-60V TO AC 110V/120V

Wind Grid Tie Inverter. 300W 10.8-30VAC to 110V. 300W 10.8-30VDC to 110V. 500W 10.8-30VAC to 110V. 500W 10.8-30VDC to 110V. 500W 22-60VDC to 110V. 1000W 22-60VDC to 110V. 1000W AC22-60V to 110V. Solar Grid Tie Inverter. 300W 10.8-30VDC to 110V/240V. 600W 22-60VDC to 110V. 600W 10.8-30VDC to 110V. 2500W Off Grid Inverter. 1000W Small Grid Tie Power Inverter. This 1000W micro grid tie inverter is designed specially for small power solar panel energy system. This inverter can directly connect solar panel, through inverter to home grid. Easy to installation, just need solar panel, grid tie inverter, then directly can put into home grid. Note: this inverter only has grid tie inverter function, do not have traditional inverter function, please do not connect. With the battery and the solar panel at the same time. Features MPPT (Maximum Power Point Tracking) allowing each solar panel to run at optimum output. Normal AC Output Power. Maximum AC Output Power. Total Harmonic Distortion(THD). 1, Connect the Solar Panels DC supply cables to the DC input terminal of the inverter, be sure that the polarity is correct. Recommended DC input cable size for maximum output is 8AWG or cables that can handle more than 30A. Optimal length would be less than 8m. Longer cables will experience higher voltage drop. The range of output power of Solar Panel is 40W1200W. Connect the supplied AC power cord to the inverter and plug it to a home wall socket. 3, The 3 green LED indicators will start to cycle from left to right when the grid and DC supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being output from the solar panels. The more big output power is, the more fast the rate is. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, this is called Island Protection. The individual system of SGPV (Small Grid Tie Photovoltaic System) is shown in the following Figure. Installing the solar panel of the SGPV at a suitable location that sunshine can irradiate on it, connecting the cables of the solar panel to the DC input terminals of the small grid tie inverter of the SGPV, inserting the plug of the inverter into the socket of the home grid. After this, when the sun shines, the SGPV will convert the solar energy to the home grid. Plug and play stack as many as you need. SGPV can be stackable, and all SGPVs are independent each other. The total power converting to the grid is the total power of all SGPVs. The installation of each SGPV is same. Connecting large quantity of SGPV. To the grid, this will construct high-power grid-tie system. Works great for solar panel 1000 watts and under…. The item “USA 1000W 1000 Watt Solar Grid Tie Inverter DC 22V-60V TO AC 110V/120V” is in sale since Monday, February 04, 2013. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “chargerdeal” and is located in South San Francisco, California. This item can be shipped to United States.

Brand: masspower
Model: SUN-1000G
MPN: Does not apply
Type: Grid Inverters

Category: 1000w | Comments Off

January 5

Grid Tie Inverter Series Cheap At Home Grid Tie System Power Shifting Save Tons Of Money 3

Category: grid | Comments Off

January 4

1200W Grid tie power inverter DC 28V-48V to AC 110V + LCD meter L, MPPT for solar

2014 6.0 new. 1200W Grid tie power inverter. DC 28V-48V to AC 110V. With 3.5 LCD meter. For solar panel 24V system (best solar panel working voltage 36V). AC Output watt :0 Watt (Max display power 15KWcan display running power less than 1W). AC Output Volt : 0 volt (Max display volt 270V). AC Output Amp : 0 Amp (Max display amp 55A). Total Operation time :0-60000 hoursOperation time: 059 minutes to 24 hours to 2500 days. Electricity consumption: 01000000 kwh. Total operation time , electricity consumption and electricity cost can clear. Can set up power , the meter will alarm when reach reserve power. Can set up the cost. Refresh rate: one time 0.5 seconds. Whats new of 2014 6.0 version? We separated the positions of the Red and Black DC input terminals. This provides for easier connection and makes an accidental short circuit much less likely. There are 2 ball type fans for greater air flow. The CPU lifetime is extended by 5 times the old version’s. PCB board: last version used SMT parts. These are easily dislodged by impacts or thermal expansion. The new version has 2 groups of capacitors, total 12 pieces. The low impedance filter is more efficient, running 27. Cooler than old version. The old version used a current and voltage control IC that had instabilities. The new version uses a new microchip from the USA. It is very stable and the reaction speed is 10 times faster, 100 times more precise. Double protection circuit for AC when there is over voltage, an island reaction, or a voltage spike. This will protect the inverter quickly if there is instability in line power. For the old version, when switch off the inverter, vestigial current and voltage in the DC side could damage the AC mosfets. In the new version, when you turn off it, it will turn off both AC and DC sides and cut off the IC signal. This will prevent any damage to the mosfets. When input power is 600w, the efficiency can reach to 90%, so the fan does not need to run offend. The high efficiency keeps the insides cool and can utilize a greater percentage of your solar power. When input power reach 1200w , the efficiency will stay at or above 87.5%. The new version has only 1 bi-colored light: low voltage: the red light flashes and the inverter will not function. High voltage: the green light always on and the inverter will not function. Normal situation: The led light will be green color flashed; led light will flash fast when power is strong. PSWGT-1200-28-48-110 + LCD meter. DC 28-48 Volt (solar panel). No Load current Draw. 55 C ± 5. Dimensions (L x W x H /cm). 43 22 8 CM. The inverter are designed for solar panels energy directly , no need battery! For battery, 24V battery for DC 14V-24V inverter; 36V for DC 28V-48V inverter, but please do NOT hook inverter with battery banks for a long time , it will burn the parts of inverter over a period of time. If you want to connect with wind turbine, need connect with a dump load controller, 12v controller for DC 14V-24V inverter; 24V controller for DC 28V-48V inverter; 36V controller for DC 50V-100V inverter. Sometimes, if you are using some heaving appliance like motor, engine, cause the voltage up down very fast, in this moment, big amp will come into the grid inverter, easy to cause the ac mos burned, so surge protector will cut down by itself to protect the grid inverter. You may have experience, when meet the big lightning, the power source of the home appliance may damage, same reason, will also cause the inverter damage, in this moment the lightning protection can release thousand voltages to protect the inverter not damage. High speed AC fuses. Now we put ac fuse outside, each inverter will come our special ac fuse, this will be broken 1 mini/sec, to make sure high voltage spike come in! Is designed for small solar panel & wind energy market, it’s suitable for family energy system. This inverter can directly use solar panel, wind charger through inverter to home grid. Easy to installation, just need solar panel, grid tie inverter, then directly can put into home grid. The inverter can be connected to any outlet in the home providing line power. The inverter IC will monitors the voltage, frequency and phase of the home grid, then produce a pure sine wave phase locked to the grid. The voltage will be just enough higher than the grid’s to feed power into the grid, Then using our current controlled PWM we control the output power to the grid. The inverter will put out power when the home grid is on. The inverter will stop feeding power into the grid when the grid is down, for safety and as required by law. Why should you use a grid tie inverter? When you use power from solar panels to supply the inverter, your home power. Meter will run more slowly(if you are using other electric appliances), or your. Home power meter will run backward(if you are not use any appliances). Why should you use a Power Jack grid tie inverter. In traditional grid tie inverters, the solar panels are connect in series so if one solar panel did not work or had poor efficiency or had a blown bypass diode, then the whole system is affected. With Power Jack inverters, you can use all panels in parallel so if one is not working properly, you only lose the output from that one panel. You can also run several Power Jack inverters parallel instead of having one large expensive unit. If you have just one expensive inverter and it fails you produce no power. If you have several smaller units and one fails you still produce power. Each inverter has it’s own MPPT function so you can extract the maximum power from all of your solar panels. When the dc charge function is normal, the inverter supplies power. If there are no dc sources (like at night or a cloudy or rainy day), the inverter will stop attempting to supply power and shut itself off from the power grid to protect itself and lengthen its lifetime. For DC 14V-24V inverter. For DC 28V-48V inverter. For DC 50V-88V inverter. For DC 102V-158V inverter. 11.5V – 13.5V. Orange light on, fan keep working, but inverter stop working. Green flash faster and more powerful output. Manufacture defects or workmanship, use appropriately, surface of item do not scratch. Manufacture defects or workmanship excludes damage caused by inappropriately used such as improper installation, accident, misuse, abuse, improper storage, or any unauthorized disassembly, repair, or modification. My solar panels are 210W 5 pcs, should I use 5 panels on one inverter or 4 panels. I live in the USA and we use 110V or 220V at 60 cycles. Should I use 1200W grid tie power inverter DC 14V-24V to AC 220V with LCD power meter for solar or 1200W grid tie inverter DC 28V-48V to AC 110V with LCD meter for my solar panels? Should I run them in set of two and double the voltage to 57.7? I like to set it up where I can get the most out of the inverters and the panels, your comments will be highly appreciated. You can use our 1200W grid tie power inverter DC 28V-48V TO AC 220V 60HZ due to below reasons. Your solar panels no load voltage are 35V, and 28V after loading, then the above DC range is just fit it. You can use 5 pcs solar panel and connect them in parallel(DC voltage will be 28V). Then connect them with 1 unit 1200W grid tie power inverter. Regarding use AC 220V system inverter, most home main AC power is 220V. In United States, then separate to 110V(sockets on wall), so you can connect the inverter to home main power (220V) directly. It is ok to use AC 110V inverter, just plug into any home AC 110V socket, but might lose 5-10% power. Q: how to connect Power Jack grid tie inverter? A: inverters DC side connect with solar panels, then the inverter’s plug just plug into home AC socket, and turn on inverter to start work. It is easy to use and no need to add controller. Q: Can solar panels can be hook in series or in parallel? A: solar panels can be hook in series or in parallel, if solar panels are in same voltage, they can be hook in series or in parallel. But if solar panels not in same voltage, they only can be hook in series, can not hook in parallel. Q: Can your grid tie power inverter can be hook together? A: yes, our grid tie power inverter can be connect in parallel, but must be same version. The item “1200W Grid tie power inverter DC 28V-48V to AC 110V + LCD meter L, MPPT for solar” is in sale since Wednesday, March 05, 2014. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “6apex_2012″ and is located in warehouse. This item can be shipped worldwide.

Brand: POWER JACK
MPN: does not apply
Country/Region of Manufacture: China

Category: 1200w | Comments Off

January 3

1200W Solar Inverter 1200 Watt Grid Tie Inverter MPPT Pure Sine Wave WVC1200

1200W Solar Power Grid Tie Inveter, 22-50VDC input, 120V/240VAC output. With PLC protocol MPPT and APL. Please read all details before you place order. Please inquiry us if you have any question. Since the item is for professional people with experience related. Recommend the use of PV modules. Maximum input DC voltage. Peak power tracking voltage. Min / Max start voltage. Your solar panels’ output voltage in series or in parallel. Should be in this range. Maximum DC short current. Your solar panels’ output current in series or in parallel. Should be less this value. Maximum units per branch circuit. Night time power consumption. Operating temperature range (inverter inside). According to DIN VDE 1026 According to UL1741. (No VDE or UL Certificates). CEC, CE National patent technology. CEC, CE National patent technolog. Please check the current capacity of. If you want to extend the cable. Ur PV cable included for WVC1200 is 2m 25 AMP. You can cut off one side connector and connect the wires to your grid directly that it’s better than using power plug. Especially for large current. The solar modem and filter are not. Necessary if you don’t want to monitor the data in your computer. Finally make sure the all connecting fixed stably and the grid with stable electricity. In order to reach higher power, you can use the inverters in stack. For example: 10 pcs of WVC1200 grid tie inverters used in stack that can reach 12000W. The picture as below is showing the connecting multi inverters. Please calculate the current capacity of. When you connect multi inverters. Modem and filter connection. These solar inverters only for grid-tie system, not for your battery. Please install the inverters according to the user manual and connect the ground safety. Forbid to open the shell with non-professional person , only qualified maintenance person can repair the product. The inverter should be installed in the low humidity and well ventilated place. And remove the flammable things surrounding the inverter for avoiding overheating. Avoid children play when the inverter is working. Ensure the DC input and AC output when connect with PV. The Vmp and Voc of PV should be fit for the product for get output max. 1 PV cable (2m 25 AMP). For parcels less than 2 KG, Please choose. The other countries by China or Hong Kong Post. We process and deliver the parcels from Monday to Friday. If you want to. Cancel an order because of. Immediately and we will cancel your order. Please leave a message if you request the special invoice value. S very professional product and please make. Sure you have accurate testing devices. And rich experience to install them. It’s better to send us the all connection photos. When any problem happens. We are very glad to. Hope you will give us a reasonable feedback. The item “1200W Solar Inverter 1200 Watt Grid Tie Inverter MPPT Pure Sine Wave WVC1200″ is in sale since Sunday, December 07, 2014. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “ubizniz” and is located in Shenzhen, Guangdong. This item can be shipped worldwide.

Brand: Kaideng
MPN: WVC1200
Country/Region of Manufacture: China

Category: 1200w | Comments Off

January 3

1200W grid tie micro inverter with Power line communication, mppt pure sine wave

1200W grid tie micro inverter with Power line communication, mppt pure sine wave Introduction. WVC-1200 Using IP65 waterproof streamline design, Can effectively prevent rainwater on the surface erosion, Built-in. High-performance Maximum Power Point Tracking(MPPT)Function, Better able to track changes in the solar luminosity. And control different output power, Effectively capture and collect sunlight. AC electric power transmission using the re. Verse transmission technology, Is one of our patented technology, The inverter output power can provide load priority use. Extra electricity to the grid, Efficient use of the inverter to the power emitted, Electricity transmission rate of up to 99%. Communication using two modes, Between the inverter and Collector Using power line carrier communication signals. Collector with a PC or other devices to communicate Using RS232 serial port/ WIFI wireless communication. Monitoring systems, The inverter can collect real-time data, Inverter can be controlled startup / shutdown / power regulation. High performance maximum power point tracking (MPPT). Input /output is fully isolated to protect the electrical safety. Simplify maintenance (user serviceable). Operation and maintenance costs low. Have given more than 3 negative or netural feedbacks during past 60days. Have received 3 or more negativeor netural feedback during past 60days. Have opened dispute twice in past 60days. We believe that all problems. Could be fixed by communication between buyers and sellers as long as both of us are honest and understanding. The item “1200W grid tie micro inverter with Power line communication, mppt pure sine wave” is in sale since Friday, March 27, 2015. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “sunhome910″ and is located in , . This item can be shipped to North, South, or Latin America, to all countries in Europe, to all countries in continental Asia, to Australia.

Brand: Ecopower
Country/Region of Manufacture: China

Category: 1200w | Comments Off

January 2

Pick One, 10.5 V-28 V DC MPPT GRID TIE INVERTER 60 HZ 110 V-120 V190 V-240 V AC

Please choose one Greenergystar grid tie inverter: 300W, 400W, 400W MPPT, 600W MPPT MPPT to Enhance Power Output by 30%! 400W MPPT Grid Tie inverter Feature. ALL Models has LED cycling motion Second Generation Normal Operation. AC Disconnected / Fault. Unique and intuitive display design – LED cycling in circular formation – Represent electric meter spinning backward and power is being output to the grid – Smooth motion. Grid-Tied – sell green power directly back to the grid at a premium rate (depends on your location) – NEW Maximum Power Point Tracking (MPPT) algorthim to optimize power output – Plug and Play Design, simply plug into an outlet (GFI), no hard-wiring – 60% enhanced in power output compare to first generation inverters – 38% better in. And 51% better in. With higher quality parts – Unique and intuitive LED display design to reflect power output rate – External 30A Fuse for easy maintenance – Automatic 110V – 220V AC voltage switch, NO MORE manual hassle – Wider DC Input Voltage Range, from 10.8V 28V compare to 1st generation’s 14V 28V – Allow MORE types of power source to be connected ie: Air-X, 12V battery, and etc. Aluminum enclosure will act as heat sink to help dissipate heat – Stackable (connect in parallel for higher output) – Island protection: Inverter will shut down during black outs. Simple and safe installation – Reverse polarity protection – Generates pure Sine Wave – Constant Power Output – Low distortion output on all ranges – Allow different Power factor from loads – Does not require rewiring of existing electronics – Compact and light weight design Electrical Specifications – Output. Maximum AC Output Power. 100 260V Auto Switching. Total Harmonic Distortion (THD). Yes, inverter shuts down during black out. Electrical Specifications – Input. DC Input Voltage (Solar & Wind). 10.8V – 28V. Unlimited as long as it doesn’t exceed main circuit amperage limit. 20’C – 65’C. 1.27kg 2.65lb. Dimension (L x W x H). 16.3 x 15.4 x 5.7 cm 6.3″ x 6.10″ x 2.25. Wall Mount at base. Convection cooled with fan. 1 Red and 6 Green LED. What are included: – One GreenergyStar GP2A-400 Hybrid Grid-Tied Inverter – One spare 30A fuse – One 1.5m North America Standard AC Cable – Instruction Manual. 600W MPPT Grid Tie inverter Feature. Maximum Power Point Tracking (MPPT) – optimize power output. 50% enhanced in power output compare to second generation inverters. Unique and intuitive LED display design to reflect power output rate. Allow MORE types of power source to be connected with SolarWind Hybrid RX Charge Controller ie: Air-X, 12V battery, and etc. Grid-tied – sell green energy back to the utility at a premium rate. Plug and Play design, simple and easy. No hard-wiring or rewiring of existing electronics. Automatic 110V – 220V AC voltage switch. Island Protection: Inverter will shut down during black outs. Synchronize with grid and generates pure Sine Wave. Stackable (connect in parallel for higher output). Maximum input power: 600W (rated at 16.6V and 36A). System Voltage: 12V Nominal (see input / output sections for range). 2x External 30A fuse for easy maintenance. Internal diode to prevent reverse current to solar panels or wind turbine at night. High quality finned aluminum casing to protect internal electronics and act as heat sink to dissipate heat. Microprocessor based control electronics to regulate input and output. 1X Grid Power 3 grid-tie inverter. 1X 1.5m North America Standard AC Cable. Connects directly to Nominal 12V Solar Panels. Nominal 12V AC or DC wind turbine installations with battery will require respective charge controllers and dump loads. Recommend using the GreenergyStar SolarWind Hybrid RX charge controller to monitor charging and discharging. Connect the included cable to the inverter, and then connect the other end to a wall socket. Reverse polarity in input will blow fuse and possibly. Damages caused by reverse polarity is. 100V 260V Auto Switching. Yes, Inverter will disconnect from grid during black out. 48V (anything above will damage inverter). Above 60A will blow fuse. Under 60A will heat up internal electronics. Disconnect immediately do avoid damage. 1.17kg 2.6lb. 19.3 x 16.5 x 5.4 cm 7.5″ x 6.5″ x 2.1. High quality finned aluminum to act as heat sink for fast heat dissipation. 6 Green, 1 Orange and 1 Red LED. 400W Grid Tie inverter Feature: – Plug and Play Design, simply plug into an outlet (GFI), no hard-wiring – 60% enhanced in power output compare to first generation inverters – 38% better in. What are included: – One GreenergyStar GP2-400 Hybrid Grid-Tied Inverter – One spare 30A fuse – One 1.5m North America Standard AC Cable – Instruction Manual. 300W Grid Tie inverter Feature: (Model: SSI-300) Grid Tie Inverter Video Demo. What is Micro Grid-Tie Inverter? First, we should know what a Grid-Tie Inverter is. A Grid-Tie Inverter is a device that that can transform DC electricity (ie: Solar Panels, Wind Turbine, Battery Storage) into AC power that can be directly injected into your utility’s electricity network (the power grid). As of today, most inverters available in the market are in the high output (1000W 5000W) category. Their prices ranges in the thousand’s range and it is just too much of an up front cost for anyone interested in green energy generation. In addition, because of the high output, a certified electrician will need to be hired to install the equipments and connect the cables. Ever since we invented the first generation of the Micro Grid Tie Inverters, connecting to the grid has never been this easy and affordable. This is the perfect start up solution for anyone interested in green energy generation as it is affordable and maintenance free. In addition, our inverters are stackable ; meaning multiple unit of these devices can be connected in parallel to generate a higher output. It is up to us. Up to this generation. To lead mankind into a greener future. Electrical Specifications – Output. Nominal AC Output Power. AC output voltage range. Total harmonic Distortion (THD). DC input voltage range. 10.8V – 26V. 1.16kg 2.56lb. Grid-Tied – sell green power directly back to the grid at a premium rate (depends on your location) – Maximum Power Point Tracking (MPPT) – optimize power output – Plug and Play Design, simply plug into an outlet (GFI), no hard-wiring – Stackable (connect in parallel for higher output) – Island protection: Inverter will shut down during black outs. Simple and safe installation – Reverse polarity protection – Generates pure Sine Wave – Constant Power Output – Low distortion output on all ranges – Allow different Power factor from loads – Does not require rewiring of existing electronics – LED indicators to reflect power output rate – Compact and light weight design – RoHS Compliant. One Enviro-techs SSI300 Grid-Tied Inverter – One 1.5m North America Standard AC Cable – Instruction Manual. Additional information about grid tie inverters: What is Micro Grid-Tie Inverter? Non- Reusable Power being consumed today. Reusable Power being generated for a better tomorrow and a brighter future. What is Maximum Power Point Tracking (MPPT)? MPPT is a techinque we implemented to get the maximum possible power from a solar panel. When trying to characterize the output of a solar panel mathematically, it can be represented by an IV-Curve (shown below). The equation for Power is P = IV. Where I is the Current , V is the Voltage , and P is the possible output Power. Each point on the curve is a possible combination for output power and our goal is to find the best combination to obtain maximum power. In simple terms, we are trying to get the biggest rectangle to fit under this so called IV-Curve, the bigger rectangle we can fit, the more power we get. Below are graphs to help you understand the idea better. This is a comparison between inverters with and without MPPT on an 85W solar panel. Please note that different solar panels will have slightly different IV-Curves. No Tracking Vs Tracking. Figure 1 No MPPT, with voltage fixed 17.5V P = 17.5V x 4.6A = 80.5W. Figure 2 With MPPT, amount of current and voltage to draw are calculated P = 17V x 4.95A = 84.15W. As we can see, Figure 2 is able to 84.15W with MPPT while in Figure 1, we can only get 80.5W. This is 4.5% increase in power output. Why do we care? Because solar panels are still quite expensive these days, and the increased power output will directly affect our return on investment (ROI). In addition, depending on weather, time of the day and amount of solar irradiation the panel receives, the IV curve will move along the Y-axis to reflect the possible increase / decrease in potential power output, and cause the maximum power point to shift along as well. Coming up are illustrations to visualize this idea. IV-Curves Under different weather conditions. Sunny, Clear Sky days in Summer 600 1000 W/m2. Scattered Clouds or Partly Cloudy days in Summer 300 600 W/m2. Cloudy or fog days, dawn or dusk in Summer 100 300 W/m2. Figure 3 – 5 illustrate the power gain in different weather condition with MPPT compare to a non-tracking inverter that locks voltage at 17.5V. While 17.5V is randomly chosen, it does show what would happen in real life when there is not MPPT. Studies have shown, by making use of MPPT, there will be an average of 30% increase in power production. Since the maximum power point is a variable, we have implemented a tracking algorithm that utilizes the micro processing power of our inverter to calculate the optimum voltage and current to maximize our energy harvest. Figure 1: AC Power. Figure 2: DC Input. Install in a low humidity and well-ventilated area. Remove all flammable objects. Connect the Solar Panel, Battery or Wind Turbine’s DC supply cables to the DC input terminal of the inverter as shown in Figure 2. Wind Turbine installations will require respective charge controllers and dump loads. Connect the inverter to a wall socket with the supplied AC Power Cord as shown in Figure 1. Pay close attention to the polarity of your DC input. Connecting incorrectly might blow the fuse. In such case the inverter will make a buzz sound whenever power is connected and the fuse will need to be replaced. Improper installation, accident, misuse. Any unauthorized disassembly, repair, or modification. NO OPERATING COST GENERATES ELECTRICITY FROM THE ABUNDANT RESOURCE – SOLAR & WIND. All pictures and descriptions are subjected to change without notice. We are not responsible for any inadvertent errors. Items that are used/ damaged/ deformed or altered in any ways will not be accepted. Spams and mass e-mailing will be deleted without slightest glance. E-mails with virus or anything subjected to hacking are automatically deleted. The item “Pick One, 10.5 V-28 V DC MPPT GRID TIE INVERTER 60 HZ 110 V-120 V190 V-240 V AC” is in sale since Monday, January 16, 2012. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “hi_iq” and is located in Blaine, Washington. This item can be shipped worldwide.

Brand: GreenergyStar

Category: pick | Comments Off

January 2

Pick One, 50/60 HZ 110 V-120 V-190 V-240 V AC MPPT GRID TIE INVERTER 10.5-28 V DC

Please choose one Greenergystar grid tie inverter: 300W, 400W, 400W MPPT, 600W MPPT. ALL Models has LED cycling motion Second Generation Normal Operation. AC Disconnected / Fault. Unique and intuitive display design – LED cycling in circular formation – Represent electric meter spinning backward and power is being output to the grid – Smooth motion. 300W Grid Tie inverter Feature: (Model: SSI-300) Grid Tie Inverter Video Demo. What is Micro Grid-Tie Inverter? First, we should know what a Grid-Tie Inverter is. A Grid-Tie Inverter is a device that that can transform DC electricity (ie: Solar Panels, Wind Turbine, Battery Storage) into AC power that can be directly injected into your utility’s electricity network (the power grid). As of today, most inverters available in the market are in the high output (1000W 5000W) category. Their prices ranges in the thousand’s range and it is just too much of an up front cost for anyone interested in green energy generation. In addition, because of the high output, a certified electrician will need to be hired to install the equipments and connect the cables. Ever since we invented the first generation of the Micro Grid Tie Inverters, connecting to the grid has never been this easy and affordable. This is the perfect start up solution for anyone interested in green energy generation as it is affordable and maintenance free. In addition, our inverters are stackable ; meaning multiple unit of these devices can be connected in parallel to generate a higher output. It is up to us. Up to this generation. To lead mankind into a greener future. Electrical Specifications – Output. Nominal AC Output Power. Maximum AC Output Power. AC output voltage range. Total harmonic Distortion (THD). Yes, inverter shuts down during black out. Electrical Specifications – Input. DC input voltage range. 10.8V – 26V. 20’C – 65’C. 1.16kg 2.56lb. Dimension (L x W x H). 16.3 x 15.4 x 5.7 cm 6.3″ x 6.10″ x 2.25. Convection cooled with fan. 1 Red and 6 Green LED. Grid-Tied – sell green power directly back to the grid at a premium rate (depends on your location) – Maximum Power Point Tracking (MPPT) – optimize power output – Plug and Play Design, simply plug into an outlet (GFI), no hard-wiring – Stackable (connect in parallel for higher output) – Island protection: Inverter will shut down during black outs. Simple and safe installation – Reverse polarity protection – Generates pure Sine Wave – Constant Power Output – Low distortion output on all ranges – Allow different Power factor from loads – Does not require rewiring of existing electronics – LED indicators to reflect power output rate – Compact and light weight design – RoHS Compliant. One Enviro-techs SSI300 Grid-Tied Inverter – One 1.5m North America Standard AC Cable – Instruction Manual. 400W MPPT Grid Tie inverter Feature: (Model No: GP2A-400) MPPT to Enhance Power Output by 30%! Grid-Tied – sell green power directly back to the grid at a premium rate (depends on your location) – NEW Maximum Power Point Tracking (MPPT) algorthim to optimize power output – Plug and Play Design, simply plug into an outlet (GFI), no hard-wiring – 60% enhanced in power output compare to first generation inverters – 38% better in. And 51% better in. With higher quality parts – Unique and intuitive LED display design to reflect power output rate – External 30A Fuse for easy maintenance – Automatic 110V – 220V AC voltage switch, NO MORE manual hassle – Wider DC Input Voltage Range, from 10.8V 28V compare to 1st generation’s 14V 28V – Allow MORE types of power source to be connected ie: Air-X, 12V battery, and etc. Aluminum enclosure will act as heat sink to help dissipate heat – Stackable (connect in parallel for higher output) – Island protection: Inverter will shut down during black outs. Simple and safe installation – Reverse polarity protection – Generates pure Sine Wave – Constant Power Output – Low distortion output on all ranges – Allow different Power factor from loads – Does not require rewiring of existing electronics – Compact and light weight design Electrical Specifications – Output. 100 260V Auto Switching. Total Harmonic Distortion (THD). DC Input Voltage (Solar & Wind). 10.8V – 28V. Unlimited as long as it doesn’t exceed main circuit amperage limit. 1.27kg 2.65lb. Wall Mount at base. What are included: – One GreenergyStar GP2A-400 Hybrid Grid-Tied Inverter – One spare 30A fuse – One 1.5m North America Standard AC Cable – Instruction Manual. 600W MPPT Grid Tie inverter Feature: (Model No: GP3) MPPT to Enhance Power Output by 30%! Maximum Power Point Tracking (MPPT) – optimize power output. 50% enhanced in power output compare to second generation inverters. Unique and intuitive LED display design to reflect power output rate. Allow MORE types of power source to be connected with SolarWind Hybrid RX Charge Controller ie: Air-X, 12V battery, and etc. Grid-tied – sell green energy back to the utility at a premium rate. Plug and Play design, simple and easy. No hard-wiring or rewiring of existing electronics. Automatic 110V – 220V AC voltage switch. Island Protection: Inverter will shut down during black outs. Synchronize with grid and generates pure Sine Wave. Stackable (connect in parallel for higher output). Maximum input power: 600W (rated at 16.6V and 36A). System Voltage: 12V Nominal (see input / output sections for range). 2x External 30A fuse for easy maintenance. Internal diode to prevent reverse current to solar panels or wind turbine at night. High quality finned aluminum casing to protect internal electronics and act as heat sink to dissipate heat. Microprocessor based control electronics to regulate input and output. 1X Grid Power 3 grid-tie inverter. 1X 1.5m North America Standard AC Cable. Connects directly to Nominal 12V Solar Panels. Nominal 12V AC or DC wind turbine installations with battery will require respective charge controllers and dump loads. Recommend using the GreenergyStar SolarWind Hybrid RX charge controller to monitor charging and discharging. Connect the included cable to the inverter, and then connect the other end to a wall socket. Reverse polarity in input will blow fuse and possibly. Damages caused by reverse polarity is. 100V 260V Auto Switching. Yes, Inverter will disconnect from grid during black out. 48V (anything above will damage inverter). Above 60A will blow fuse. Under 60A will heat up internal electronics. Disconnect immediately do avoid damage. 1.17kg 2.6lb. 19.3 x 16.5 x 5.4 cm 7.5″ x 6.5″ x 2.1. High quality finned aluminum to act as heat sink for fast heat dissipation. 6 Green, 1 Orange and 1 Red LED. 400W Grid Tie inverter Feature: (Model No: GP2-400) – Plug and Play Design, simply plug into an outlet (GFI), no hard-wiring – 60% enhanced in power output compare to first generation inverters – 38% better in. What are included: – One GreenergyStar GP2-400 Hybrid Grid-Tied Inverter – One spare 30A fuse – One 1.5m North America Standard AC Cable – Instruction Manual. Additional information about grid tie inverters. Non- Reusable Power being consumed today. Reusable Power being generated for a better tomorrow and a brighter future. What is Maximum Power Point Tracking (MPPT)? MPPT is a techinque we implemented to get the maximum possible power from a solar panel. When trying to characterize the output of a solar panel mathematically, it can be represented by an IV-Curve (shown below). The equation for Power is P = IV. Where I is the Current , V is the Voltage , and P is the possible output Power. Each point on the curve is a possible combination for output power and our goal is to find the best combination to obtain maximum power. In simple terms, we are trying to get the biggest rectangle to fit under this so called IV-Curve, the bigger rectangle we can fit, the more power we get. Below are graphs to help you understand the idea better. This is a comparison between inverters with and without MPPT on an 85W solar panel. Please note that different solar panels will have slightly different IV-Curves. No Tracking Vs Tracking. Figure 1 No MPPT, with voltage fixed 17.5V P = 17.5V x 4.6A = 80.5W. Figure 2 With MPPT, amount of current and voltage to draw are calculated P = 17V x 4.95A = 84.15W. As we can see, Figure 2 is able to 84.15W with MPPT while in Figure 1, we can only get 80.5W. This is 4.5% increase in power output. Why do we care? Because solar panels are still quite expensive these days, and the increased power output will directly affect our return on investment (ROI). In addition, depending on weather, time of the day and amount of solar irradiation the panel receives, the IV curve will move along the Y-axis to reflect the possible increase / decrease in potential power output, and cause the maximum power point to shift along as well. Coming up are illustrations to visualize this idea. IV-Curves Under different weather conditions. Sunny, Clear Sky days in Summer 600 1000 W/m2. Scattered Clouds or Partly Cloudy days in Summer 300 600 W/m2. Cloudy or fog days, dawn or dusk in Summer 100 300 W/m2. Figure 3 – 5 illustrate the power gain in different weather condition with MPPT compare to a non-tracking inverter that locks voltage at 17.5V. While 17.5V is randomly chosen, it does show what would happen in real life when there is not MPPT. Studies have shown, by making use of MPPT, there will be an average of 30% increase in power production. Since the maximum power point is a variable, we have implemented a tracking algorithm that utilizes the micro processing power of our inverter to calculate the optimum voltage and current to maximize our energy harvest. Figure 1: AC Power. Figure 2: DC Input. Install in a low humidity and well-ventilated area. Remove all flammable objects. Connect the Solar Panel, Battery or Wind Turbine’s DC supply cables to the DC input terminal of the inverter as shown in Figure 2. Wind Turbine installations will require respective charge controllers and dump loads. Connect the inverter to a wall socket with the supplied AC Power Cord as shown in Figure 1. Pay close attention to the polarity of your DC input. Connecting incorrectly might blow the fuse. In such case the inverter will make a buzz sound whenever power is connected and the fuse will need to be replaced. Improper installation, accident, misuse. Any unauthorized disassembly, repair, or modification. NO OPERATING COST GENERATES ELECTRICITY FROM THE ABUNDANT RESOURCE – SOLAR & WIND. All pictures and descriptions are subjected to change without notice. We are not responsible for any inadvertent errors. Items that are used/ damaged/ deformed or altered in any ways will not be accepted. Spams and mass e-mailing will be deleted without slightest glance. E-mails with virus or anything subjected to hacking are automatically deleted. The item “Pick One, 50/60 HZ 110 V-120 V-190 V-240 V AC MPPT GRID TIE INVERTER 10.5-28 V DC” is in sale since Wednesday, January 30, 2013. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “hi_iq” and is located in Blaine, Washington. This item can be shipped worldwide.

Brand: GreenergyStar

Category: pick | Comments Off

January 1

300W 400W 600W 800W Micro Grid Tie Inverter MPPT Function For Solar Wind System

GreenergyStar Grid Power III 600W For Solar & Wind Hybrid Systems. Generation Grid Tie Inverter. Of all the different kinds of renewable energy available today, solar and wind are the two most popular ones favored by homeowners due to their. Easy implementation and wide range of suitable sites. However, these green energy sources do not come with a plug to connect to a wall socket (the grid). Even if they do, there are different parameters for each type of renewable energy and interconnecting with the grid would present a challenge. Fortunately, grid-tie inverters have been invented to solve this interconnection problem. What is grid-tie inverter? A Grid-Tie Inverter is a device that that can transform 12V DC electricity i. Solar Panels, Wind Turbine, Battery Storage into 120-240V AC power that can be directly injected into your utility’s electricity network (the power grid). However, the down side is, most inverters available in the market today are in the high output (1000W 5000W) category. Their prices range in the thousands and it is just too much of an upfront cost for anyone interested in green energy generation. In addition, because of the high output, a certified electrician will need to be hired to install the equipments and connect the cables. I would also like to DIY to cut down on cost and have a project that I would be proud to work on… Isn’t there an. Way to do this? With our latest developed micro grid-tie inverter Grid Power 3 feature the popular plug and play function, you will be connecting your renewable energy sources into the grid and join the green movement in no time. A Greener future awaits. What’s New in the 3rd Generation? So you ask, What’s new in this third generation? Well, by reaching the 3rd generation, we have again improved the power output by incorporating Maximum Power Point Tracking (MPPT) technology to harvest more solar energy. The inverter has also utilized better surge protection components to shield against voltage spikes and energy surges. In addition, this inverter will work with our SolarWind Hybrid RX charge controller to allow wind energy input. Here are the high lights. Maximum Power Point Tracking (MPPT). What is Maximum Power Point Tracking (MPPT)? MPPT is a techinque we implemented to get the maximum possible power from a solar panel. When trying to characterize the output of a solar panel mathematically, it can be represented by an IV-Curve (shown below). The equation for Power is P = IV. Where I is the Current , V is the Voltage , and P is the possible output Power. Each point on the curve is a possible combination for output power and our goal is to find the best combination to obtain maximum power. In simple terms, we are trying to get the biggest rectangle to fit under this so called IV-Curve, the bigger rectangle we can fit, the more power we get. Below are graphs to help you understand the idea better. This is a comparison between inverters with and without MPPT on an 85W solar panel. Please note that different solar panels will have slightly different IV-Curves. No Tracking Vs Tracking. Figure 1 No MPPT, with voltage fixed 17.5V P = 17.5V x 4.6A = 80.5W. Figure 2 With MPPT, amount of current and voltage to draw are calculated P = 17V x 4.95A = 84.15W. As we can see, Figure 2 is able to 84.15W with MPPT while in Figure 1, we can only get 80.5W. This is 4.5% increase in power output. Why do we care? Because solar panels are still quite expensive these days, and the increased power output will directly affect our return on investment (ROI). In addition, depending on weather, time of the day and amount of solar irradiation the panel receives, the IV curve will move along the Y-axis to reflect the possible increase / decrease in potential power output, and cause the maximum power point to shift along as well. Coming up are illustrations to visualize this idea. IV-Curves Under different weather conditions. Sunny, Clear Sky days in Summer 600 1000 W/m2. Scattered Clouds or Partly Cloudy days in Summer 300 600 W/m2. Cloudy or fog days, dawn or dusk in Summer 100 300 W/m2. Figure 3 – 5 illustrate the power gain in different weather condition with MPPT compare to a non-tracking inverter that locks voltage at 17.5V. While 17.5V is randomly chosen, it does show what would happen in real life when there is not MPPT. Studies have shown, by making use of MPPT, there will be an average of 30% increase in power production. Since the maximum power point is a variable, we have implemented a tracking algorithm that utilizes the micro processing power of our inverter to calculate the optimum voltage and current to maximize our energy harvest. In 2008, when we designed the first generation inverter, what we had in mind was an inexpensive device to allow the public to have a chance to test out renewable energy production and promote the green movement at an affordable price range. As people’s environmental awareness increased over the years, the demand for bigger systems also increase. Therefore, once again, the power of this inverter has increased by 50% to 600W. Compatibility with GreenergyStar SolarWind Hybrid RX Charge Controller. Want to grid-tie a wind system? Then it is time to get a charge controller. The GreenergyStar SolarWind Hybrid RX is designed to work with our grid-tie inverters for solar and wind applications. It offers the protection needed by inverters against volatile storms and unstable inputs. Compatible with solar panels, 12V AC / DC wind turbines, Southwest Windpower’s Air-X, 403, 303 and SunForce’s 600W wind turbines. In this generation, we have utilized better surge protection components to shield against potential energy surges during connection or disconnection to the grid. Voltage spikes in night time or stormy weathers are eliminated with higher grade electronics. The circuit board has been completely redesigned to accommodate to the UL 1741 Standard and the status of our UL application is currently pending. Maximum Power Point Tracking (MPPT) – optimize power output. 50% enhanced in power output compare to second generation inverters. Unique and intuitive LED display design to reflect power output rate. Allow MORE types of power source to be connected with SolarWind Hybrid RX Charge Controller ie: Air-X, 12V battery, and etc. Grid-tied – sell green energy back to the utility at a premium rate. Plug and Play design, simple and easy. No hard-wiring or rewiring of existing electronics. Automatic 110V – 220V AC voltage switch. Island Protection: Inverter will shut down during black outs. Synchronize with grid and generates pure Sine Wave. Stackable (connect in parallel for higher output). Maximum input power: 600W (rated at 16.6V and 36A). System Voltage: 12V Nominal (see input / output sections for range). 2x External 30A fuse for easy maintenance. Internal diode to prevent reverse current to solar panels or wind turbine at night. High quality finned aluminum casing to protect internal electronics and act as heat sink to dissipate heat. Microprocessor based control electronics to regulate input and output. Connects directly to Nominal 12V Solar Panels. Nominal 12V AC or DC wind turbine installations with battery will require respective charge controllers and dump loads. Recommend using the GreenergyStar SolarWind Hybrid RX charge controller to monitor charging and discharging. Connect the included cable to the inverter, and then connect the other end to a wall socket. Reverse polarity in input will blow fuse and possibly. Damages caused by reverse polarity is. Maximum AC Output Power. 100V 260V Auto Switching. Total Harmonic Distortion (THD). Yes, Inverter will disconnect from grid during black out. 48V (anything above will damage inverter). Above 60A will blow fuse. Under 60A will heat up internal electronics. Disconnect immediately do avoid damage. 20’C – 65’C. 1.17kg 2.6lb. Dimension (L x W x H). 19.3 x 16.5 x 5.4 cm 7.5″ x 6.5″ x 2.1. Wall Mount at base. Convection cooled with fan. High quality finned aluminum to act as heat sink for fast heat dissipation. 6 Green, 1 Orange and 1 Red LED. 1X Grid Power 3 grid-tie inverter. 1X 1.5m North America Standard AC Cable. Improper installation, accident, misuse. Any unauthorized disassembly, repair, or modification. For Solar & Wind Hybrid Systems. GreenergyStar Grid Power II 400W. Electrical Specifications – Output. Model: GP2-400 Nominal AC Output Power: 400W AC Output voltage range: 100 260V Auto Switching Frequency: 46Hz – 65Hz Total harmonic Distortion (THD): <5% Power Factor: 0.99 Island Protection: Yes, inverter shuts down during black out Output current waveform: True sine wave. Electrical Specifications - Input. DC input voltage range (Solar & Wind): 10.8V - 28V Peak inverter efficiency: 92% Over-current protection: 30A Reverse Polarity Protection: Yes Power consumption (Standby): 0.9W Stackable: Yes, unlimited. Operating temperature range: -20'C - 65'C Weight: 1.27kg / 2.65lb Dimension (L x W x H): 16.3 x 15.4 x 5.7 cm 6.3" x 6.10" x 2.25 Mounting: Wall Mount AC Cable Length: 1.5m Cooling: Convection cooled with fan Display: 1 Red and 6 Green LED. New Model: GP2A-400 Second Generation Normal Operation. AC Disconnected / Fault. Unique and intuitive display design - LED cycling in circular formation - Represent electric meter spinning backward and power is being output to the grid - Smooth motion. Grid-Tied - sell green power directly back to the grid at a premium rate (depends on your location) - Maximum Power Point Tracking (MPPT) - optimize power output - Plug and Play Design, simply plug into an outlet (GFI), no hard-wiring - Does not require rewiring of existing electronics - Compact and light weight design - 60% enhanced in power output compare to first generation inverters - 38% better in space utilization and 51% better in Weight Reduction with higher quality parts - Unique and intuitive LED display design to reflect power output rate - External 30A Fuse for easy maintenance - Automatic 110V - 220V AC voltage switch, NO MORE manual hassle - Wider DC Input Voltage Range, from 10.8V 28V compare to 1st generation's 14V 28V - Allow MORE types of power source to be connected ie: Air-X, 12V battery, and etc. Aluminum enclosure will act as heat sink to help dissipate heat - Stackable (connect in parallel for higher output) - Island protection: Inverter will shut down during black outs. Simple and safe installation - Reverse polarity protection - Generates pure Sine Wave - Constant Power Output - Low distortion output on all ranges - Allow different Power factor from loads. One GreenergyStar GP2-400 Hybrid Grid-Tied Inverter - One spare 30A fuse - One 1.5m North America Standard AC Cable - Instruction Manual. For more items, please view my other auctions. 300W Grid Tie inverter Feature: (Model: SSI-300) Grid Tie Inverter Video Demo. What is Micro Grid-Tie Inverter? First, we should know what a Grid-Tie Inverter is. A Grid-Tie Inverter is a device that that can transform DC electricity (ie: Solar Panels, Wind Turbine, Battery Storage) into AC power that can be directly injected into your utility's electricity network (the power grid). As of today, most inverters available in the market are in the high output (1000W 5000W) category. Their prices ranges in the thousand's range and it is just too much of an up front cost for anyone interested in green energy generation. Ever since we invented the first generation of the Micro Grid Tie Inverters, connecting to the grid has never been this easy and affordable. This is the perfect start up solution for anyone interested in green energy generation as it is affordable and maintenance free. In addition, our inverters are stackable ; meaning multiple unit of these devices can be connected in parallel to generate a higher output. It is up to us. Up to this generation. To lead mankind into a greener future. Nominal AC Output Power. AC output voltage range. Total harmonic Distortion (THD). Yes, inverter shuts down during black out. DC input voltage range. 10.8V - 26V. 1.16kg 2.56lb. 16.3 x 15.4 x 5.7 cm 6.3" x 6.10" x 2.25. 1 Red and 6 Green LED. Grid-Tied - sell green power directly back to the grid at a premium rate (depends on your location) - Maximum Power Point Tracking (MPPT) - optimize power output - Plug and Play Design, simply plug into an outlet (GFI), no hard-wiring - Stackable (connect in parallel for higher output) - Island protection: Inverter will shut down during black outs. Simple and safe installation - Reverse polarity protection - Generates pure Sine Wave - Constant Power Output - Low distortion output on all ranges - Allow different Power factor from loads - Does not require rewiring of existing electronics - LED indicators to reflect power output rate - Compact and light weight design - RoHS Compliant. One Enviro-techs SSI300 Grid-Tied Inverter - One 1.5m North America Standard AC Cable - Instruction Manual. All pictures and descriptions are subjected to change without notice. We are not responsible for any inadvertent errors. Please refer to S&H price list above for details. Usually it will take 45 days for bounce backs to return to us. So, PLEASE make sure you address is correct. Items that are used/ damaged/ deformed or altered in any ways are not acceptable. The item "300W 400W 600W 800W Micro Grid Tie Inverter MPPT Function For Solar Wind System" is in sale since Wednesday, October 30, 2013. This item is in the category "Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters". The seller is "goodsgood" and is located in Blaine, Washington. This item can be shipped worldwide.
300W 400W 600W 800W Micro Grid Tie Inverter MPPT Function For Solar Wind System

Category: 300w | Comments Off

January 2016
M	T	W	T	F	S	S
« Dec				Feb »
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30	31