https://gridtieinverter.org Wed, 04 Nov 2026 10:13:42 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://gridtieinverter.org/2026/10/istabreeze-5-blade-i-2000-wind-turbine-grid-tie-inverter-230v-on-grid/ https://gridtieinverter.org/2026/10/istabreeze-5-blade-i-2000-wind-turbine-grid-tie-inverter-230v-on-grid/#comments Tue, 06 Oct 2026 23:48:00 +0000 https://gridtieinverter.org/2026/10/istabreeze-5-blade-i-2000-wind-turbine-grid-tie-inverter-230v-on-grid/













Thank you for your trust! Find What Complements You-Cross-Sell Today! 2026-08-11 14:03 – 167612196044. 5 Blade I-2000 Wind Turbine + Grid Tie Inverter 230V On Grid UK. IstaBreeze® 5 Blade I-2000 – 230V Plug-In Wind Turbine System. A Grid-Compatible, High-Efficiency Wind Energy Solution for Residential Use. A 5-blade wind turbine offers several technical and practical advantages, particularly in areas with low to moderate wind conditions. Due to the increased number of blades, the rotor can start spinning at lower wind speeds, making it more responsive and effective in environments where wind is not consistently strong. The additional blades also help distribute aerodynamic loads more evenly, resulting in smoother rotation and reduced mechanical stress on the system. This contributes to greater stability, less vibration, and a longer overall lifespan for turbine components. Furthermore, the slower rotational speed of a 5-blade design reduces noise emissions, which makes it more suitable for residential or noise-sensitive locations. Although 3-blade systems may reach higher speeds in strong winds, 5-blade turbines are more efficient in capturing energy at lower wind levels, ensuring more stable and consistent energy production throughout the day. Their symmetrical design also enhances structural balance and safety during operation. For users prioritizing reliability, quiet performance, and better low-wind efficiency, the 5-blade wind turbine presents a highly effective solution. The IstaBreeze® 2000 Watt Wind Turbine System is a high-performance renewable energy package specifically engineered for reliable, long-term operation under medium to high wind conditions. This system is ideally suited for users seeking a direct AC grid connection without the need for intermediary battery storage systems. It represents a cost-effective, efficient, and environmentally responsible energy generation solution for both residential and light commercial applications. This system is meticulously engineered to deliver efficient, stable, and safe wind power directly to the public grid via a standard 230V AC household socket, eliminating the need for external energy storage systems or complex electrical infrastructure. Nominal Output Power – 2000W. With a rated power output of 2000 watts, the I-2000 turbine is capable of delivering a significant share of household energy needs. This high performance ensures both cost-effectiveness and strong energy yield, even under variable wind conditions. Direct Grid Feed-in (230V). The system is designed for plug-and-play operation, allowing users to connect the inverter directly to a standard household socket (Schuko or equivalent). This feature greatly simplifies installation and reduces the cost and complexity typically associated with renewable energy systems. Unlock the power of renewable wind energy with this high-performance grid-tie inverter system. Designed for ease of use and maximum efficiency, this inverter offers safe and stable energy feed-in to the public grid – ideal for residential applications. Plug & Play Installation – No technical setup required. Just connect and start generating. Auto Recognition – Automatically detects system parameters for optimal performance. User-Friendly Design – No complex configuration needed. Built-in Dump Load Controller – Automatically manages excess power and prevents overloads. Limiter Sensor – Ensures energy is only fed into the grid when it exceeds household consumption. WiFi-Ready – Optional module allows wireless monitoring (module not included). VDE Standard Approved – High efficiency and safety compliance. Compatible with 48V 3-phase AC wind turbines. Inverter input voltage range: AC25.9V 51.96V. Parallel connection supported on AC side. Island protection, overload, and reverse polarity protection. Each unit tested for 20+ hours before dispatch. ? Note: Not compatible with DC input sources. Choosing the Right Voltage. To match your turbine, calculate the AC voltage from its DC output using this formula: V(AC) = V(DC) ÷ 1.732. Example: A 48V wind turbine with a DC output of 45-90V corresponds to AC25.9V-51.96V. This inverter is the ideal solution for anyone wanting to maximize the use of wind energy in a safe, efficient, and plug-and-play format. ? Technical Specifications – IstaBreeze Grid-Tie Inverter. Why Choose This Product? With trusted IstaBreeze quality, this inverter set allows you to harness wind energy safely and efficiently. The built-in limiter sensor ensures that only excess power is fed into the grid-slowing down your electricity meter and maximizing self-consumption. The integrated dump load controller protects your system from overvoltage, making it a smart, worry-free solution. Easy to install, no technical skills required. Important Notice for Our Valued Customers. Please be aware that such claims do not reflect actual performance under real-world wind conditions. To avoid disappointment, we strongly advise you to carefully review the product specifications and ensure that the system you are considering truly meets your energy needs. Making an informed and responsible choice is essential for investing in a reliable, efficient, and long-lasting wind power solution. IstaBreeze® 5 Blade I-2000 – 230V Plug-In Wind Turbine SystemA Grid-Compatible, High-Efficiency Wind Energy Solution for Residential Use A 5-blade wind turbine offers several technical and practical advantages, particularly in areas with low to moderate wind conditions.

]]> https://gridtieinverter.org/2026/10/istabreeze-5-blade-i-2000-wind-turbine-grid-tie-inverter-230v-on-grid/feed/ 0 https://gridtieinverter.org/2025/08/10kw-power-grid-tie-inverter-for-wind-turbine-50hz60hz-220v380v-with-dump-load/ https://gridtieinverter.org/2025/08/10kw-power-grid-tie-inverter-for-wind-turbine-50hz60hz-220v380v-with-dump-load/#comments Fri, 29 Aug 2025 07:33:00 +0000 https://gridtieinverter.org/2025/08/10kw-power-grid-tie-inverter-for-wind-turbine-50hz60hz-220v380v-with-dump-load/















His grid tie inverter is for wind turbine power generation. The inverter input is 3 phase AC, not DC. The inverter output is for 220V single phase grid OR 380V 50Hz/60Hz Three phase grid. System Composition The system mainly includes: wind turbine, lightning protector 1 in wind turbine side, electromagnetic brake system, AC filter in wind turbine side, rectifier boost voltage, dump load circuit, inverting bridge, AC filter in inverter side, common mode filter, AC breakers, lightning protector 2 in grid side, and single-phase 230V grid. Hardware Function Introduction Lightning protector: the lightning protection device at the input and output side of the machine. Electromagnetic brake: the machine can start electromagnetic brake to brake the wind turbine when rotational speed is over, inverter output power is over, the temperature is over. AC filter: The ripple and DC components in AC voltage are filtered out, and the AC voltage is transformed into a smooth, harmonic waveform which satisfying the requirements. Rectifier boost circuit: Transform and boost the three-phase AC voltage generated by wind turbine to required DC voltage. Dump load circuit: Redundant power is released by dump load by PWM control. Inverting bridge: transform DC to AC Common mode filter: suppress EMI interference in the circuit. AC breakers: Cut off the connection between grid and inverting bridge during inverter fault or standby to avoid rectification flow backward. Features Wind power Controller&Inverter integrated machine Support wide range voltage input MPPT included, and track point settable Complete protection functions. Keep pressing the button for 5s to unload completely. And then recover by pressing it for another 5s. Switch “ON” the brake switch. Brake by over wind speed. It dumps load completely when reached the set wind speed, and recover automatically after working 10mins and wind speed is less than 15m/s. Brake by over rotational Speed. Unload completely when reached the set rotational speed, and recover automatically after 10mins. AC output over frequency. AC short circuit protection. Dump load, grid state, wind generator state, faults. Wind rotate speed, wind power, AC output voltage /current/power, and fault code. Note: Part of parameters can be adjusted according to customer. Please connect those parts according to the order of. And notice the following items. Connect two output lines of dump load to the unload terminals “R” “R” of the machine. “N” and earth wire. On the machine relatively. When wind turbine is still or running in a low speed, connects its output line to the “WIND INPUT” terminal on the. Connect communication device to the relative communication port. If there is a communication device. Check all the connection to make sure they are connected rightly and tightly. Please measure the voltage and frequency of the grid before connect the system to the grid. Cannot be connected to the earth wire terminal, or the machine will be damaged permanently. The switch should be at “BRAKE” status while installation, and changed to “RUN” status when it works. Grid is not normally connected. Grid voltage or frequency is abnormal. Check the details from the monitoring software. Inverting circuit soft over current protection. Check the wiring connection on the AC side circuit after ensuring the machine is disconnected with any power supply. Please connect Win Power. Once the inverting module temperature recovers to normal, the machine will clear the fault itself. IPM protection for the inverting side. Wait for 5mins, test after the fault is recovered automatically. If not, please contact Win Power. Rectifying circuit soft over current protection. IPM protection for rectifying side. Wind voltage is higher than bus voltage fault protection point.

]]> https://gridtieinverter.org/2025/08/10kw-power-grid-tie-inverter-for-wind-turbine-50hz60hz-220v380v-with-dump-load/feed/ 0 https://gridtieinverter.org/2025/06/3kw-5kw-3-phase-wind-turbine-on-grid-tie-inverter-withlimiter-dc-22-65v45-90v/ https://gridtieinverter.org/2025/06/3kw-5kw-3-phase-wind-turbine-on-grid-tie-inverter-withlimiter-dc-22-65v45-90v/#comments Sun, 15 Jun 2025 23:25:41 +0000 https://gridtieinverter.org/2025/06/3kw-5kw-3-phase-wind-turbine-on-grid-tie-inverter-withlimiter-dc-22-65v45-90v/ 92% MPPT Efficiency:99%. DC/3PHASE AC 22-65V/ 45V-90V. AC 100V 110V 120V 220V 230V 240V 50hz 60hz. NEW 1000W Wind Power Grid Tie Inverter. Low cost and easy installation. Directly connect to three phase wind turbine. Much better output waveform compare with similiar GTI. Improving the efficiency of the entire solar power system. Overload protection, […]]]>


Max Efficiency:>92% MPPT Efficiency:99%. DC/3PHASE AC 22-65V/ 45V-90V. AC 100V 110V 120V 220V 230V 240V 50hz 60hz. NEW 1000W Wind Power Grid Tie Inverter. Low cost and easy installation. Directly connect to three phase wind turbine. Much better output waveform compare with similiar GTI. Improving the efficiency of the entire solar power system. Overload protection, Anti-island protection. Short-circuit protection/Reverse polarity protection. AC output voltage and current THD. Input AC/DC Voltage Range. AC Output Voltage Range. 90-130V / 190VAC 260VAC. (1) (2) Dump load resistor connection Terminal. This terminals will connect to the dump load resistor. (3) AC socket, This socket will connect the inverter to the public grid via the AC cable. This terminals will connect to the wind turbine. The Inverter display can show many information, The main interface of the display and the icons explainations are show above. The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid. Select the internal limiter mode, inverter will work under limiter mode, output power of the inverter will be determined by load power. Select the external limiter mode, inverter need a external limiter module working with it. For more details about the limiter function, pls contact supplier. This function only useful with limiter type inverter. In this interface, the display shows real time power, PV input voltage, inside temperature, date and time. Clock And Date Setting. Set the clock and date in this page, save the setting before exit. Notes: Save the setting after you reconfigurate the working mode or backlight setting. Notes: Battery Discharge Current Mode And Battery Discharge Power Mode are not developed yet for this wind inverter. This interface will show the real time grid waveform. The grid voltage and frequency also will show in this interface. The energy interface will show the power generation curve everyday. Today KWH and Total KWH are also show in this page. AC Output Current Waveform and PF Test Of 2000W Model. Tested 2000W model at nearly full load, Output current waveform shows good pure sine wave in oscilloscope, PF value also shows in good result, 99.8% PF value. Advanced patented technology, MPPT efficiency is higher. High-quality imported components, more stable quality, lower failure rate. Significantly longer life, more than 10 years. Each inverter need to pass twice testing (20 hours) before leaving factory. Combination of SGPV does not interact. Als berechtigter Importeur sind Sie für angemessene Steuern oder Einfuhrgebühren verantwortlich. Alle Artikelstandorte in Berlin, Deutschland DE Lagerbestand DE bis DE 2 Werktage! Wenn Sie Ihren Artikel nach 20 Tagen nicht erhalten, kontaktieren Sie uns bitte umgehend für weitere Hilfe. Wir haften für alle Schäden oder Verluste, die beim Versandprozess entstehen. Einfuhrzölle, Mehrwertsteuer und andere Gebühren sind NICHT im Artikelpreis oder den Versandkosten enthalten. Als berechtigter Importeur sind Sie für angemessene Steuern oder andere Einfuhrgebühren verantwortlich. Wenn Sie mit unseren Produkten und unserem Service zufrieden sind, hinterlassen Sie uns bitte ein positives Feedback und eine 5-Sterne-Bewertung, und wir werden dasselbe für Sie tun. Bitte zögern Sie nicht, uns zu kontaktieren, wenn Sie Fragen haben. Wir werden Ihnen so schnell wie möglich antworten und unser Bestes geben, um Ihre Probleme zu lösen. Glauben Sie uns, jeder Kunde wird als unser wichtiger Schatz angesehen. Und bitte kontaktieren Sie uns Bitte beachten Sie, dass durch die folgenden Anweisungen Ihre Mitarbeit sehr geschätzt wird und die Garantiezeit automatisch verlängert werden kann. Q1: Was kann ich tun, wenn ich meinen Artikel nicht rechtzeitig erhalten habe? A1: Bitte suchen Sie den Bestelldatensatz, wählen Sie “Verkäufer kontaktieren” im Dropdown-Menü auf der rechten Seite, das zu einer neuen Seite führt, und “Wählen Sie ein Thema aus”. Q2: Wie können wir verarbeiten, wenn ich mit Ihrem Produkt nicht zufrieden bin? A2: Bitte klicken Sie unten auf “Diesen Artikel zurückgeben”, suchen Sie die folgenden 3 Optionen und wählen Sie eine aus, um fortzufahren, sollte in Ordnung sein. PS: Die Gründe für die Rücksendung sind nicht wichtig, egal welche Sie auswählen, wir müssen sie weiter bestätigen die Details per Nachricht. Als führendes und aufstrebendes Unternehmen im Hersteller- und Exportgeschäft ist Bayoung seit mehr als 10 Jahren auf Geschäfts- und Industrieprodukte, Haus- und Gartenprodukte spezialisiert. Wir glauben, dass es unsere Vision und Mission ist, innovative Produkte anzubieten mit bestem Service und konkurrenzfähigem Preis, um Sie zufriedenzustellen. Unser Ziel ist es, sicherzustellen, dass Sie genau das finden, wonach Sie suchen, und Ihnen das Aufgeben Ihrer Bestellungen zu erleichtern. Willkommen in unserem Shop! Ihre Zufriedenheit ist unsere höchste Priorität. Bitte zögern Sie nicht, uns zu kontaktieren, wenn Sie Fragen zu unseren Produkten oder Dienstleistungen haben. Unsere Arbeitszeit (Montag bis Freitag): -09:00-12:00 (GMT+8) -14:00-18:00 (GMT+8) Samstag: -09:00-12:00 (GMT+8) -14:00-17:00 (GMT+8). Alle E-Mails werden während unserer Arbeitszeit sehr schnell beantwortet, E-Mails werden normalerweise während des Urlaubs innerhalb von 24 Stunden beantwortet. Willkommen, um uns zu kontaktieren, wenn Sie ein Problem haben.

]]> https://gridtieinverter.org/2025/06/3kw-5kw-3-phase-wind-turbine-on-grid-tie-inverter-withlimiter-dc-22-65v45-90v/feed/ 0 https://gridtieinverter.org/2025/02/grid-tie-inverter-hd-wave-wind-turbine-three-phase-output-ctw-2ks-2kw-solar-3-ph/ https://gridtieinverter.org/2025/02/grid-tie-inverter-hd-wave-wind-turbine-three-phase-output-ctw-2ks-2kw-solar-3-ph/#comments Mon, 17 Feb 2025 19:52:43 +0000 https://gridtieinverter.org/2025/02/grid-tie-inverter-hd-wave-wind-turbine-three-phase-output-ctw-2ks-2kw-solar-3-ph/








Great Unit for home off grid solar, water, wind etc setups. This was used with Ridge Blade Setup. This item has hardly any use and was used for testing. Please check the item tag for specifics.

]]> https://gridtieinverter.org/2025/02/grid-tie-inverter-hd-wave-wind-turbine-three-phase-output-ctw-2ks-2kw-solar-3-ph/feed/ 0 https://gridtieinverter.org/2024/11/2000w-wind-turbine-on-grid-tie-inverter-pure-sine-wave-45-90vdc-110v-220vac-2/ https://gridtieinverter.org/2024/11/2000w-wind-turbine-on-grid-tie-inverter-pure-sine-wave-45-90vdc-110v-220vac-2/#comments Sat, 09 Nov 2024 19:01:00 +0000 https://gridtieinverter.org/2024/11/2000w-wind-turbine-on-grid-tie-inverter-pure-sine-wave-45-90vdc-110v-220vac-2/ 92% MPPT Efficiency:99%. DC/3PHASE AC 22-65V/ 45V-90V. AC 100V 110V 120V 220V 230V 240V 50hz 60hz. NEW 1000W Wind Power Grid Tie Inverter. Low cost and easy installation. Directly connect to three phase wind turbine. Much better output waveform compare […]]]>












2000W Wind Turbine On Grid Tie Inverter Pure Sine Wave 45-90VDC – 110V/ 220VAC. Max Efficiency:>92% MPPT Efficiency:99%. DC/3PHASE AC 22-65V/ 45V-90V. AC 100V 110V 120V 220V 230V 240V 50hz 60hz. NEW 1000W Wind Power Grid Tie Inverter. Low cost and easy installation. Directly connect to three phase wind turbine. Much better output waveform compare with similiar GTI. Improving the efficiency of the entire solar power system. Overload protection, Anti-island protection. Short-circuit protection/Reverse polarity protection. AC output voltage and current THD. Input AC/DC Voltage Range. AC Output Voltage Range. 90-130V / 190VAC 260VAC. Dimensions (W x H x D). (1) (2) Dump load resistor connection Terminal. This terminals will connect to the dump load resistor. (3) AC socket, This socket will connect the inverter to the public grid via the AC cable. This terminals will connect to the wind turbine. The Inverter display can show many information, The main interface of the display and the icons explainations are show above. The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid. Select the internal limiter mode, inverter will work under limiter mode, output power of the inverter will be determined by load power. Select the external limiter mode, inverter need a external limiter module working with it. For more details about the limiter function, pls contact supplier. This function only useful with limiter type inverter. In this interface, the display shows real time power, PV input voltage, inside temperature, date and time. Clock And Date Setting. Set the clock and date in this page, save the setting before exit. Notes: Save the setting after you reconfigurate the working mode or backlight setting. Notes: Battery Discharge Current Mode And Battery Discharge Power Mode are not developed yet for this wind inverter. This interface will show the real time grid waveform. The grid voltage and frequency also will show in this interface. The energy interface will show the power generation curve everyday. Today KWH and Total KWH are also show in this page. AC Output Current Waveform and PF Test Of 2000W Model. Tested 2000W model at nearly full load, Output current waveform shows good pure sine wave in oscilloscope, PF value also shows in good result, 99.8% PF value. Advanced patented technology, MPPT efficiency is higher. High-quality imported components, more stable quality, lower failure rate. Significantly longer life, more than 10 years. Each inverter need to pass twice testing (20 hours) before leaving factory. Combination of SGPV does not interact. No(Follow-up Tracking information will not be generated until the package arrives at the destination country). We will reply you within 24 hours. Feedback is important to us, we will leave positive to our customers. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem.

]]> https://gridtieinverter.org/2024/11/2000w-wind-turbine-on-grid-tie-inverter-pure-sine-wave-45-90vdc-110v-220vac-2/feed/ 0 https://gridtieinverter.org/2024/09/2000w-grid-tie-wind-power-inverter-controller-for-wind-turbine-with-wifi/ https://gridtieinverter.org/2024/09/2000w-grid-tie-wind-power-inverter-controller-for-wind-turbine-with-wifi/#comments Fri, 27 Sep 2024 16:09:30 +0000 https://gridtieinverter.org/2024/09/2000w-grid-tie-wind-power-inverter-controller-for-wind-turbine-with-wifi/ 92% MPPT efficiency: 99% –3PHASE AC 45V-90V – AC 220V 230V 240V 50Hz 60Hz NEW 1000W 2000W Wind Power Grid Tie Inverter Maximum efficiency: >92% MPPT efficiency: 99% 1. Low cost and easy installation 2. Connect directly to three-phase wind turbine 3. Much better output waveform compared to similar GTI 4. Improving the […]]]>











Maximum efficiency: >92% MPPT efficiency: 99% –3PHASE AC 45V-90V – AC 220V 230V 240V 50Hz 60Hz NEW 1000W 2000W Wind Power Grid Tie Inverter Maximum efficiency: >92% MPPT efficiency: 99% 1. Low cost and easy installation 2. Connect directly to three-phase wind turbine 3. Much better output waveform compared to similar GTI 4. Improving the efficiency of the whole solar power system Overload protection, anti-island protection Short circuit protection / reverse polarity protection 5. AC output voltage and current THD. 99% This model of grid connection is designed for wind turbines that output 3-phase AC voltage. It can maintain the speed of the wind turbine and keep the voltage of the wind turbine always within the rated range of the grid-connected inverter. It also has high voltage protection function, when the wind is too strong and the dump load control system can’t keep the output voltage from the wind turbine, the controller will disconnect from the wind turbine, so it’s very safe to be used. Technical specifications Modell 2000G2-WAL-LCD 2000W AC/DC-Eingangsspannungsbereich 45V 90V AC-Ausgangsspannungsbereich 190 VAC 260 VAC Ausgangsfrequenz 46Hz65Hz Standby-Stromverbrauch.

]]> https://gridtieinverter.org/2024/09/2000w-grid-tie-wind-power-inverter-controller-for-wind-turbine-with-wifi/feed/ 0 https://gridtieinverter.org/2024/04/1000w-3-phase-wind-turbine-grid-tie-inverter-limiter-dc-22-65v-45-90v-sun-wal-2/ https://gridtieinverter.org/2024/04/1000w-3-phase-wind-turbine-grid-tie-inverter-limiter-dc-22-65v-45-90v-sun-wal-2/#comments Sat, 20 Apr 2024 08:56:49 +0000 https://gridtieinverter.org/2024/04/1000w-3-phase-wind-turbine-grid-tie-inverter-limiter-dc-22-65v-45-90v-sun-wal-2/







New Grid Tie Inverter for 3 Phase Wind Turbines. Built-in Dump Load Controller – three phase AC input from wind turbine – Single Phase AC to Grid (100V 110V 120V 220V 230V 240V) – Built-in Power Limit Function. About the Input Voltage. DC 22-65V or 45-90V The DC input range of the wind inverter, the test point should be at the DC side of the built-in rectifier of the inverter, but you can calculate from 3 phases of AC output voltage of the wind turbine to get the DC voltage, the formula is Vac = Vdc/1.732. For example, if the DC input voltage range of the inverter is 4590V, then the wind turbine’s output AC range of the should be 45/1.73290/1.732 = AC 26V 52V. The wind inverter must work with 3 phase AC model wind turbine, there should be 3 wires from the wind turbine. Another way, if the wind turbine is used to charge 24v battery, please select 22-65V inverter. If the wind turbine is used to charge 48v battery, and the highest voltage low than 65v, please select 22-65V inverter. If the 48v wind turbine highest voltage over 65v, and low than 90v, please select 45-90V inverter. Advantage Features of the 2G Wind Power Grid Tie Inverter. The 2nd Generation grid tie inverter, new technical, Higher efficiency. Higher MPPT efficiency, Max 99% Multiple intelligent protection to ensure safe use. Directly connect to three phase wind turbine, without regulator Easy to install and easy to operate. The Electric meter will SLOW down. The wind grid tie power inverter can obtain the wind energy from wind turbine, and can tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. The inverter can be connected to any outlets of utility grid at house. The small grid tie inverter monitors the volume, frequency and phase of the home utility grid, then produce pure sine wave AC power that the frequency and phase are as same as the grid’s, and the volume is a bit higher than the grid’s, then according to the current controlled PWM, to control the output power to the grid. The small grid tie inverter just puts out power when the home grid is on. When the wind turbine is rotating, and the output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produces power, and the grid tie inverter will change the power from wind turbine to the home grid. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these power from the inverters will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid. Why our grid tie inverters need limit function? — It is in response to the overwhelming clamor from our customers for a function that can control the amount of power that the grid tie inverters can generate. With this function, the inverters will just generate power that is not larger than the loads’ power even the inverters are connected with big power solar panel array, we call it “limit function”. Because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meter(the one provided by the electricity provider in the area) is not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumer will be charged for power even if it is given to the grid, and this is the problem. Our SUN G2 series grid tie inverters are integrated this limit function, so SUN G2 series inverters can work in limit mode or normal mode(no limit), you can make the configuration on the LCD display. Power Output : 1000W Input AC/DC Voltage Range : 22v 60V or 45V 90V AC Output Voltage Range : 95-140VAC /185-265VAC Output Frequency : 46Hz65Hz Standby Power Consumption. Wind power grid tie inverter —- 1pcs, 2. Dump load resistor —1pcs, 3. AC cable –1pcs , 4. Limiter sensor/clamp / cable —- optional. Q: Can this inverter work if power off? Grid tie inverter will stop to work if the grid is off. Q :Can this inverter be connected in Parallel? A : Yes, the grid tie inverter is stackable. You may connect two or more inverters to one big wind turbine.

]]> https://gridtieinverter.org/2024/04/1000w-3-phase-wind-turbine-grid-tie-inverter-limiter-dc-22-65v-45-90v-sun-wal-2/feed/ 0 https://gridtieinverter.org/2024/03/2000w-on-grid-tie-inverter-with-limiter-controller-for-3-phase-48v-wind-turbine/ https://gridtieinverter.org/2024/03/2000w-on-grid-tie-inverter-with-limiter-controller-for-3-phase-48v-wind-turbine/#comments Tue, 26 Mar 2024 06:37:57 +0000 https://gridtieinverter.org/2024/03/2000w-on-grid-tie-inverter-with-limiter-controller-for-3-phase-48v-wind-turbine/ 92% MPPT Efficiency:99%. AC 100V 110V 120V 220V 230V 240V 50hz 60hz. NEW 1000W Wind Power Grid Tie Inverter. Low cost and easy installation. Directly connect to three phase wind turbine. Much better output waveform compare with similiar GTI. Improving […]]]>












2000W on Grid Tie Inverter with Limiter Controller for 3 Phase 48V Wind Turbine. Max Efficiency:>92% MPPT Efficiency:99%. AC 100V 110V 120V 220V 230V 240V 50hz 60hz. NEW 1000W Wind Power Grid Tie Inverter. Low cost and easy installation. Directly connect to three phase wind turbine. Much better output waveform compare with similiar GTI. Improving the efficiency of the entire wind power system. Overload protection, Anti-island protection. Short-circuit protection/Reverse polarity protection. AC output voltage and current THD. Input AC/DC Voltage Range. AC Output Voltage Range. 90-130V / 190VAC 260VAC. Dimensions (W x H x D). (1) (2) Dump load resistor connection Terminal. This terminals will connect to the dump load resistor. (3) AC socket, This socket will connect the inverter to the public grid via the AC cable. This terminals will connect to the wind turbine. The Inverter display can show many information, The main interface of the display and the icons explainations are show above. The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid. Select the internal limiter mode, inverter will work under limiter mode, output power of the inverter will be determined by load power. Select the external limiter mode, inverter need a external limiter module working with it. For more details about the limiter function, pls contact supplier. This function only useful with limiter type inverter. In this interface, the display shows real time power, PV input voltage, inside temperature, date and time. Clock And Date Setting. Set the clock and date in this page, save the setting before exit. Notes: Save the setting after you reconfigurate the working mode or backlight setting. Notes: Battery Discharge Current Mode And Battery Discharge Power Mode are not developed yet for this wind inverter. This interface will show the real time grid waveform. The grid voltage and frequency also will show in this interface. The energy interface will show the power generation curve everyday. Today KWH and Total KWH are also show in this page. AC Output Current Waveform and PF Test Of 2000W Model. Tested 2000W model at nearly full load, Output current waveform shows good pure sine wave in oscilloscope, PF value also shows in good result, 99.8% PF value. Advanced patented technology, MPPT efficiency is higher. High-quality imported components, more stable quality, lower failure rate. Significantly longer life, more than 10 years. Each inverter need to pass twice testing (20 hours) before leaving factory. Combination of SGPV does not interact. Improving the efficiency of the entire solar power system. No(Follow-up Tracking information will not be generated until the package arrives at the destination country). We will reply you within 24 hours. Feedback is important to us, we will leave positive to our customers. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem.

]]> https://gridtieinverter.org/2024/03/2000w-on-grid-tie-inverter-with-limiter-controller-for-3-phase-48v-wind-turbine/feed/ 0 https://gridtieinverter.org/2024/03/2000w-wind-turbine-on-grid-tie-inverter-pure-sine-wave-45-90vdc-110v-220vac/ https://gridtieinverter.org/2024/03/2000w-wind-turbine-on-grid-tie-inverter-pure-sine-wave-45-90vdc-110v-220vac/#comments Sat, 23 Mar 2024 18:23:47 +0000 https://gridtieinverter.org/2024/03/2000w-wind-turbine-on-grid-tie-inverter-pure-sine-wave-45-90vdc-110v-220vac/ 92% MPPT Efficiency:99%. DC/3PHASE AC 22-65V/ 45V-90V. AC 100V 110V 120V 220V 230V 240V 50hz 60hz. NEW 1000W Wind Power Grid Tie Inverter. Low cost and easy installation. Directly connect to three phase wind turbine. Much better output waveform compare […]]]>












2000W Wind Turbine On Grid Tie Inverter Pure Sine Wave 45-90VDC – 110V/ 220VAC. Max Efficiency:>92% MPPT Efficiency:99%. DC/3PHASE AC 22-65V/ 45V-90V. AC 100V 110V 120V 220V 230V 240V 50hz 60hz. NEW 1000W Wind Power Grid Tie Inverter. Low cost and easy installation. Directly connect to three phase wind turbine. Much better output waveform compare with similiar GTI. Improving the efficiency of the entire solar power system. Overload protection, Anti-island protection. Short-circuit protection/Reverse polarity protection. AC output voltage and current THD. Input AC/DC Voltage Range. AC Output Voltage Range. 90-130V / 190VAC 260VAC. Dimensions (W x H x D). (1) (2) Dump load resistor connection Terminal. This terminals will connect to the dump load resistor. (3) AC socket, This socket will connect the inverter to the public grid via the AC cable. This terminals will connect to the wind turbine. The Inverter display can show many information, The main interface of the display and the icons explainations are show above. The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid. Select the internal limiter mode, inverter will work under limiter mode, output power of the inverter will be determined by load power. Select the external limiter mode, inverter need a external limiter module working with it. For more details about the limiter function, pls contact supplier. This function only useful with limiter type inverter. In this interface, the display shows real time power, PV input voltage, inside temperature, date and time. Clock And Date Setting. Set the clock and date in this page, save the setting before exit. Notes: Save the setting after you reconfigurate the working mode or backlight setting. Notes: Battery Discharge Current Mode And Battery Discharge Power Mode are not developed yet for this wind inverter. This interface will show the real time grid waveform. The grid voltage and frequency also will show in this interface. The energy interface will show the power generation curve everyday. Today KWH and Total KWH are also show in this page. AC Output Current Waveform and PF Test Of 2000W Model. Tested 2000W model at nearly full load, Output current waveform shows good pure sine wave in oscilloscope, PF value also shows in good result, 99.8% PF value. Advanced patented technology, MPPT efficiency is higher. High-quality imported components, more stable quality, lower failure rate. Significantly longer life, more than 10 years. Each inverter need to pass twice testing (20 hours) before leaving factory. Combination of SGPV does not interact. No(Follow-up Tracking information will not be generated until the package arrives at the destination country). We will reply you within 24 hours. Feedback is important to us, we will leave positive to our customers. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem.

]]> https://gridtieinverter.org/2024/03/2000w-wind-turbine-on-grid-tie-inverter-pure-sine-wave-45-90vdc-110v-220vac/feed/ 0 https://gridtieinverter.org/2023/11/1000w-wind-turbine-grid-tie-inverter-dc-input-22v-65v-45v-90v-pure-sine-wave/ https://gridtieinverter.org/2023/11/1000w-wind-turbine-grid-tie-inverter-dc-input-22v-65v-45v-90v-pure-sine-wave/#comments Wed, 29 Nov 2023 05:09:22 +0000 https://gridtieinverter.org/2023/11/1000w-wind-turbine-grid-tie-inverter-dc-input-22v-65v-45v-90v-pure-sine-wave/





Pure Sine Wave output. Directly connect to three phase wind turbine, without regulator. Choosing an applicable wind turbine for TINGEN Grid Tie Inverter.

]]> https://gridtieinverter.org/2023/11/1000w-wind-turbine-grid-tie-inverter-dc-input-22v-65v-45v-90v-pure-sine-wave/feed/ 0