Magnum MS4024PAE Inverter/Charger Complete Kit. 1 Magnum ME-RC50 Digital LCD Display Remote Panel with 50′ Cable. 1 Magnum Battery Temperature Sensor. 1 Magnum MS4024PAE Inverter/Charger, 4000W, 24VDC, Pure Sine Wave. 1 Magnum MMP250-30D Mini Panel (pre-wired) with 250Amp main breaker and two 30Amp breakers. 1 Magnum BP-MMP Back Plate (for easy mounting on a wall while being code approved). The MS-PAE Series Inverter/Charger includes the following. High wattage output in a small footprint – less weight and area needed for install. Ability to parallel up to four identical MS-PAE inverters to increase output power capability (requires ME-RTR). Large AC access and terminal block [wire size: #18 to #2 AWG (0.82 to 33.6 mm2) CU]. DC terminal covers with 360 degree connection. Pure sine wave output (<5% THD). 120/240 VAC Split phase output in a single inverter. PFC (Power Factor Corrected) multi-stage battery charger. RS485 standard communication protocol. Remote and Network ports (easy connection for optional accessories). ON/OFF Inverter-mounted switch with LED indicator. Battery Temperature Sensor - for optimum charging during extreme temperature changes. Field Serviceable for qualifi ed personnel - tested repair kits available. Smooth, aesthetically pleasing design. MS4024PAE and MS4448PAE are ETL listed to UL/cUL STD 1741 and CSA STD 22.2 107.01-01 for safety. The MS-PAE Series Inverter/Charger from Magnum Energy is a pure sine wave inverter designed specifically for the most demanding renewable energy applications. When the power requirements of the system are beyond the capacity of a single MS-PAE Series inverter or the system is expanded as more loads are added, up to four MS-PAE Series inverters can be connected together in a parallel configuration. When connecting inverters in parallel, the overall inverter power and surge capacity is increased to power a large single load or more smaller loads. Available in 4000 (24 volts) watt models, the MS-PAE Series inverters are powerful, easy-to-use and ETL listed to the stringent requirements of UL 1741 and CSA C22.2 No. 107.1-01 for Renewable Energy installations. Pure Sine Wave: Power your T. S, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%. Choices: The MS-PAE Series comes in 24 volt configurations, allowing you to choose the model that is right for you. Versatile Mounting: Mount the MS-PAE Series on a shelf or wall. Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance. Multiple Ports: The MS-PAE Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port. The extra large AC access cover with terminal screw block and 360°DC connection terminals with covers make this inverter more accessible when it needs to be. The MS-PAE Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator. MMP250-30D Mini Panel The MMP (Mini Magnum Panel) has been specifically designed to combine all of the major components required for a renewable energy system inverter/battery disconnect, AC overcurrent protection, grounding connections, and a full system inverter bypass switch as a convenient way to isolate the inverter for battery maintenance into a single, easy to install pre-wired enclosure. Designed for single inverter applications, the MMP enclosure features convenient front panel operation, and with the optional front panel remote, allows you to easily set up, monitor, and operate your Magnum inverter system. BP-MMP The BP-MMP is a single-piece, powder-coated steel back plate designed to accommodate the MMP enclosure, a Magnum inverter, and the inverter hood together; making the complete system appear more seamless. Designed with PEM i. The BP-MMP back plate is also used to provide the necessary requirement to provide a noncombustible mounting surface required when mounting the inverter on a wall. ME-RC50 The ME-RC Remote Control communicates with the inverter to easily operate and monitor your inverter and charger from a remote location. This Remote Control has an easy-to-read LCD screen and displays the inverter/charger status with the at a glance LEDs. Soft keys provide simple access to menus and a rotary encoder knob allows you to scroll through and easily configure the adjustable settings in the inverter (or any connected accessory) and maintain the critical settings in nonvolatile memory. The ME-RC also has the option of controlling the ME-AGS Automatic Gen Start and the ME-BMK Battery Monitor Kit (requires revision 2.0 or higher remote) using a network connection to the inverter. This remote has convenient finger-tip operation, including the new one-knob programming. MP-HOOD The MP-HOOD a single-piece, powder-coated steel cover plate. It is designed to allow a Magnum inverter to be mounted vertically and prevent items from falling into the ventilation openings in the top of the inverter. Inside our store, Missouri Wind and Solar. A REAL STORE WITH REAL PEOPLE. YOU CAN ACTUALLY COME IN AND TRY OUR PRODUCTS AND SEE THEM WORKING. Products may be slightly different than the ones pictured. If our supplier runs short of the products shown, we will substitute them for the same quality or better. The item "Magnum MS4024PAE Inverter charger 120/240 grid tie all the whistles and bells" is in sale since Friday, June 12, 2015. This item is in the category "Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters". The seller is "missouriwind" and is located in Seymour, Missouri. This item can be shipped to United States.

• Brand: Magnum
• Model: MS4024PAE Inverter charger 120/240 grid tie
• MPN: MS4024PAE Inverter charger 120/240 grid tie
• Country/Region of Manufacture: United States

This Magnum KIT includes: 1 x Magnum MS4024PAE Inverter/Charger, 4000W, 24VDC, Pure Sine Wave 1 x Magnum MMP250-30D Mini Panel (pre-wired) with 250Amp main breaker and two 30Amp breakers 1 x Magnum BP-MMP Back Plate for easy mounting on a wall, code approved! 1 x Magnum ME-RC50 Digital LCD Display Remote Panel with 50′ Cable 1 x Magnum MP-HOOD 1 x Magnum Battery Temperature Sensor. The MS-PAE Series Inverter/Charger from Magnum Energy is a pure sinewave inverter designed specifically for the most demanding renewable energy applications. When the power requirements of the system are beyond the capacity of a single MS-PAE Series inverter or the system is expanded as more loads are added, up to four MS-PAE Series inverters can be connected together in a parallel configuration. When connecting inverters in parallel, the overall inverter power and surge capacity is increased to power a large single load or more smaller loads. Available in 4000 (24 volts) and 4400 (48 volts) watt models, the MS-PAE Series inverters are powerful, easy-to-use and ETL listed to the stringent requirements of UL 1741 and CSA C22.2 No. 107.1-01 for Renewable Energy installations. The MS-PAE Series Inverter/Charger includes the following. High wattage output in a small footprint – less weight and area needed for install. Ability to parallel up to four identical MS-PAE inverters to increase output power capability (requires ME-RTR). Pure sine wave output (<5% THD). 120/240 VAC Split phase output in a single inverter. PFC (Power Factor Corrected) multi-stage battery charger. RS485 standard communication protocol. Remote and Network ports (easy connection for optional accessories). ON/OFF Inverter-mounted switch with LED indicator. Large AC access and terminal block [wire size: #18 to #2 AWG (0.82 to 33.6 mm2) CU]. DC terminal covers with 360 degree connection. Battery Temperature Sensor - for optimum charging during extreme temperature changes. Field Serviceable for qualifi ed personnel - tested repair kits available. Smooth, aesthetically pleasing design. MS4024PAE and MS4448PAE are ETL listed to UL/cUL STD 1741 and CSA STD 22.2 107.01-01 for safety. 18 - 34.0 VDC. Nominal AC output voltage. 120/240 VAC split phase. Output frequency and accuracy. 60 Hz ± 0.04%. Total Harmonic Distortion (THD). 1 msec surge current (amps AC). L-N: 120, L-L 70. 100 msec surge current (amps AC). L-N: 72, L-L 40. 5 sec surge power (real watts). 30 sec surge power (real watts). 5 min surge power (real watts). 30 min surge power (real watts). Maximum continuous input current. Power Consumption - inverting (no load). Continuous Output at 25 ºC. Input current at rated output (AC amps). 15 AAC per leg at 120/240 VAC split phase. General Features and Capabilities. 2 legs at 30A per leg transfer standard on all models. Five stage charging capability. Bulk, Absorb, Float, Equalize, and Battery Saver. Standard with included temp sensor (battery temp 0 to 50° C). 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans. Yes, with two overlapping circuits. Yes on transformer, MOSFETS, and battery. Conformal coating on PCBs for corrosion protection. Powder coated chassis & top for corrosion protection. Stainless steel fasteners for corrosion protection. ETL Listed to UL1741 and CSA STD C22.2 No. 20° C to +60° C (-4° F to 140° F). 40° C to +70° C (-40° F to 158° F). 0 to 95% RH non condensing. Dimensions (l x w x h). 13.75 x 12.65 x 8.0 (34.9 cm x 32.1 cm x 20.3 cm). Shelf or wall (vents not allowed to face downward unless ME-HOOD and ME-CB are installed). 15,000' (4570 m). Sellers: Add a FREE map to your listings. The item "Magnum MS4024PAE Inverter Charger 120/240 Grid Tie ALL THE BELLS AND WHISTLES" is in sale since Tuesday, December 17, 2013. This item is in the category "Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters". The seller is "hurricanewindpowercom" and is located in Roanoke, Virginia. This item can be shipped worldwide.

• Brand: Magnum Energy
• Model: MS4024PAE
• Country of Manufacture: United States