Grid Tie Inverter Battery Discharge Auto-Limit MPPT Solar DC24-72V AC110V- 240V. Kinds of DC input voltage specifications can be selected. 1 PV-voc voltage range: 26V45V or 24v battery. 2 PV-voc voltage range: 40V-60V or 36v battery. 3 PV-voc voltage range: 55V-90V or 48v battery. 4 PV-voc voltage range: 85V-130V or 72v battery. 5 PV-voc voltage range: 120V-180V or 96v battery. 1000w Grid Tie Inverter for Solar Panels or Battery, working well with Batterywith limiter, with power acquisition meter(one acquisition meter can connect 5 inverters), Limiter sensor clamp, woking well with sloar panels, PV Input voltage Range (optional): PV Voc range: 1.26V-45V (for 24V battery) 2.40V-60V (for 36V battery) 3.55V-90V (for 48V battery or 60V Battery) 4.85V-130V (for 72V battery) 5120V-180V(for 96V battery) –Output Voltage : AC 110V 120V 220V 230V 240V. Colorful LCD display, more intuitive display parameters; built-in Chinese/English interface. 4 function keys, parameterizable operation. The main interface can display the current model specifications, DC voltage, AC voltage, real-time power, internal real- time temperature, cumulative total power generation, real-time working status prompts, such as: work, standby, AC and DC voltage is too high or too low, internal Temperature over temperature prompts and other status prompts. LCD backlight light 1 to 9 can be set. Delay start time can be set: 5-180 seconds. It can be set to battery working mode and photovoltaic working mode. Battery operating mode can set the battery start voltage, low voltage protection voltage, output power. When the DC input voltage is too low or too high, the LCD will automatically turn off after 10 minutes of standby to reduce power consumption and extend the life of the LCD. When the DC input voltage reaches the normal allowable input voltage range, the LCD display will automatically turn on. Self-test mode is provided. After entering the self-test option, the test will be performed in sequence: AC input voltage and display voltage, DC input voltage value, current power value, internal AC relay on/off test, fan start/stop test, and test completion prompts need to be renewed. Only after power can the inverter be restarted. How to connect the sensor? Conect the RS485 cable of the AC power acquisition meter to the 485 port of the inverter. Plug the connection terminal of the transmitted current sensor into the port of the collector “CT-IN” (no +-). Connect the AC power supply port “AC-IN” of the collector to the same AC power supply for the load. After the connection, it will light up. In the inverter LCD, enter the “battery grid connection”, through the SET {Bat AutoLimit Grid}. Connect the inverter to AC power first, then connect the battery, the inverter will automatically output the same power as the power detected by the collector. Therefore, the inverter will not have excess electricity to be sent to the grid (ie: automatic limiter function). One acquisition meter can connect 5 unit grid tie inverters. 1000W Grid tie inverter with limiter 5 kind different specifications for 5 kind DC input solar panels or batteries, please choose the right one. Solar Grid Inverter with Limiter. AC power acquisition meter. Installation and operation manual (English). Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. This is the second generation grid-connected inverter with limiter. With the second generation GTN-LIM, we added a acquisition meter. The collecting meter collects the power consumption of the load through the sensor, and then transmits it to the inverter through the RS-485 port. The inverter will output the corresponding power to the grid, which we call an external power acquisition. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “audosta” and is located in this country: CN. This item can be shipped worldwide.
- Colour: LCD 1KW and Limiter
- Input Voltage: PV 26V-45V (24V BAT)
- Output Voltage: AC 220V-240V
- Socket Type: Universal
- System Configuration: Grid-Tie
- Maximum Input Power: 1000W
- Power Source: Solar
- Inverter Technology: Battery-Based
- Custom Bundle: No
- Color: Blue
- MPN: 3254132543621
- Brand: Unbranded
- Type: Charger/Inverter
- Current Type: AC/DC
- Voltage: DC24-72V AC110V- 240V
- Recommended Environment: Indoor/Outdoor
- Features: Durable
- Charging Mode: MPPT (Maximum Power Point Tracking)
- Country/Region of Manufacture: China
- Resistance Properties: Other
- Application: Electronics
- Power: 1000W
