Because of the high power, a circuit breaker is required. Regarding the heating problem of the inverter. This is normal phenomenon. All electronic devices generate heat during operation. The inverter uses aluminum alloy material. Metal can conduct heat better. The inverter also has over-temperature protection if the temperature is high. Then the inverter will automatically reduce the working output efficiency. After cooling down, restart. It is recommended to install the inverter in a ventilated, dry and cool place. This is a common problem of micro-inverters. After a large amount of customer data feedback, the inverter cannot work because the DC or AC fuse is damaged. When you encounter this problem, we can send you accessories for free. And give you maintenance video instruction. You can easily replace it. Grid Tie Inverter Using IP65 waterproof streamline design, Can effectively prevent rainwater on the surface erosion. High performance Maximum Power Point TraCKING(MPPT) and Autolock maximum Power Point (APL) Please do not install outdoors, avoid rain. You can install it in a ventilated, dry, cool place. Single unit connects to one PV module. On Grid Tie Inversor Maximum 600W AC output power. Single-phase output, Flexible 3-phase PV systems. 4.2.4G wireless communication and monitoring. Solar Grid Tie Inverter Up to 8 units (230V) per branch. Customizable various input (DC, PV) voltage range. Integrated AC bus cable, Ready-To-Use. On Grid inverter Low cost, Easy installation. Notice: SG-600W internal upgrade. Dual-chip inverter: function and output are independently controlled with faster control speed and higher efficiency. The old version is a single-chip control function and output. Solar micro-inverters Product Parameter. Input Data(DC, PV). Number of Input MC4 Connector. Smart Microinverter Rated Output Power. Default Output Voltage Range. Default Output Frequency Range. Pure Sine Wave inverter Power Factor. Maximum Units per Branch. PV Solar Micro Inverter Peak Efficiency. Operating Ambient Temperature Range. Solar PV inverter Dimensions (W x H x D). 185mm x 180mm x 38.5mm (not include connectors and cable). Max Current of AC Bus Cable. Micro solar Smart Inverter Cooling Mode. Natural Convection – No Fans. Communication(Inverter to DataBox). High Frequency Transformers, Galvanically Isolated. Equipment ground is provided by the PE in the AC cable. No additional ground is required. Isolated Island Protection, Voltage Protection, Frequency Protection, Temperature Protection, Current Protection, etc. NB/T32004:2013, NB/T32004:2013, EN61000-3-2, EN62109, VDE0126, UL1741 etc. Dimensions (W x H x D). Avoid sunlight – when installing an inverter, you need to avoid direct sunlight to cause excessive temperature. Avoid rain – the installation of the inverter needs to prevent rain or other liquid from getting wet or soaking. Keep ventilation -the inverter needs to be installed in a well ventilated environment to facilitate heat emission. Installation Schematic For SG600. Wiring Schematic For SG600. 1: Length 2m 2: AC power cord can only be used for 1PCS inverter. 3: If multiple inverters are connected in parallel, a circuit breaker must be used. Connect to the grid in accordance with L, N, G. 4: Can only be used for SG series 300W-700W. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “factory-direct2021″ and is located in this country: CN. This item can be shipped worldwide.

• Watt：: Data Box
• Brand: Unbranded
• Type: Charger/Inverter
• Voltage: 110V