November
29
ECO 1000W Wind Power Generator Grid Tie Power Inverter Suit for AC 110V 220V
ECO 1000W Wind Power Grid Tie Power Inverter Suit for DC 22V-65V AC 110V. This model grid tie has designed for wind turbines that put out 3 phases AC voltage. It can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too big, and the dump load controlling system can’t keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. Low cost and easy installation. Directly connect to three phase wind turbine. Much better output waveform compare with similiar GTI. Improving the efficiency of the entire solar power system. Overload protection , Anti-island protection. Short-circuit protection/Reverse polarity protection. AC output voltage and current THD. Build in dump load function. The inverter can be connected to any outlets of utility grid at house. It monitors the volume, frequency and phase of the home utility grid, then produce pure sine wave AC power that the frequency and phase are as same as the grid’s, and the volume is a bit higher than the grid’s, then according to the current controlled PWM, to control the output power to the grid. The grid tie inverter only outputs power when the home grid is on. When the wind turbine is rotating, and the output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produces power, and the grid tie inverter will change the power from wind turbine to the home grid. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these power from the inverter will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid. A1000W Wind Power Grid Tie Inverter. BDump load resistor & Connection Cable. Dlimiter sensor clamp & cable. B:Dump load resistor connection Terminal. This terminals will connect to the dump load resistor. This terminals will connect to the wind turbine. Connector for internal / external limiter(have been Integrated in the inverter, no need to connect) e:Cooling Fan. F:AC socket, This socket will connect the inverter to the public grid via the AC cable. How to select a wind grid tie inverter for your wind turbine system? Max output power of the wind turbine. 500w-1000w wind turbines , suggest 1000w inverter. 1000w-2000w wind turbines , suggest 2000w turbine. 24v 36v 48v wind turbines , suggest 22-65v inverter. 48v 60v 72v 90V wind turbines , suggest 45-90v inverter. Some wind turbines has been built-in a regulator , the output is DC , please choose DC input type wind inverter. What is the dump load controller/resistor? The dump load controller/resistor is used to protect the wind turbine and inverter. If the wind speed is too fast , the voltage will be high , it will work to reduce the wind turbines runing speed and voltage. Installing Sunshine Grid Tie Power System involves several key steps. Considering the total capacity of the grid tie power system that you need. Choosing applicable solar panels for Sunshine Grid Tie Inverter. Selecting accessory for installation of the Grid Tie Power System. Selecting correct model of Sunshine Grid Tie Inverter. Installing solar panels to suitable place. Installing Sunshine Grid Tie Inverter to suitable place. Connecting Sunshine Grid Tie Power System with cables and connectors. Completing Sunshine installation map and Connecting the PV modules. 1000W 24V Wind Power Grid Tie Inverter. Input AC/DC Voltage Range. AC Output Voltage Range. 412815.5cm(16.14″11″6.1). In this interface, the display shows real time power, PV input voltage, inside temperature, date and time. Clock And Date Setting. Set the clock and date in this page, save the setting before exit. Notes: Save the setting after you reconfigurate the working mode or backlight setting. Notes: Battery Discharge Current Mode And Battery Discharge Power Mode are not developed yet for this wind inverter. This interface will show the real time grid waveform. The grid voltage and frequency also will show in this interface. The energy interface will show the power generation curve everyday. Today KWH and Total KWH are also show in this page. The item “ECO 1000W Wind Power Generator Grid Tie Power Inverter Suit for AC 110V 220V” is in sale since Saturday, September 7, 2019. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “quasolar” and is located in Los Angeles, California. This item can be shipped to North, South, or Latin America.
- Brand: ECO-WORTHY
- MPN: ECO-L03020201004-1
- Power: 1000W
- Model: 12V Wind Grid Tie Inverter
- Input voltage: 12V
- Output voltage: 110V OR 220V
- UPC: 714119944819
- Peak Inverter Efficiency: 92%
- Power Factor: 0.99
- Output Wave Form: Pure Sine Wave
- MPPT Efficiency: 99%
- Over Current Protection: Yes
- Over Temperature Protection: Yes
- Reverse Polarity Protection: Yes
- Anti-Island Protection: Yes
- Stackable: Yes
- Dump Load Controller: Built-in
- Display: LCD
- Output Frequency: 46Hz~65Hz
