April 20

1000W 3 Phase Wind Turbine Grid Tie Inverter Limiter DC 22-65V 45-90V SUN WAL

1000W-3-Phase-Wind-Turbine-Grid-Tie-Inverter-Limiter-DC-22-65V-45-90V-SUN-WAL-01-dhwj 1000W 3 Phase Wind Turbine Grid Tie Inverter Limiter DC 22-65V 45-90V SUN WAL
1000W 3 Phase Wind Turbine Grid Tie Inverter Limiter DC 22-65V 45-90V SUN WAL
1000W 3 Phase Wind Turbine Grid Tie Inverter Limiter DC 22-65V 45-90V SUN WAL
1000W 3 Phase Wind Turbine Grid Tie Inverter Limiter DC 22-65V 45-90V SUN WAL
1000W 3 Phase Wind Turbine Grid Tie Inverter Limiter DC 22-65V 45-90V SUN WAL
1000W 3 Phase Wind Turbine Grid Tie Inverter Limiter DC 22-65V 45-90V SUN WAL

1000W 3 Phase Wind Turbine Grid Tie Inverter Limiter DC 22-65V 45-90V SUN WAL
New Grid Tie Inverter for 3 Phase Wind Turbines. Built-in Dump Load Controller – three phase AC input from wind turbine – Single Phase AC to Grid (100V 110V 120V 220V 230V 240V) – Built-in Power Limit Function. About the Input Voltage. DC 22-65V or 45-90V The DC input range of the wind inverter, the test point should be at the DC side of the built-in rectifier of the inverter, but you can calculate from 3 phases of AC output voltage of the wind turbine to get the DC voltage, the formula is Vac = Vdc/1.732. For example, if the DC input voltage range of the inverter is 4590V, then the wind turbine’s output AC range of the should be 45/1.73290/1.732 = AC 26V 52V. The wind inverter must work with 3 phase AC model wind turbine, there should be 3 wires from the wind turbine. Another way, if the wind turbine is used to charge 24v battery, please select 22-65V inverter. If the wind turbine is used to charge 48v battery, and the highest voltage low than 65v, please select 22-65V inverter. If the 48v wind turbine highest voltage over 65v, and low than 90v, please select 45-90V inverter. Advantage Features of the 2G Wind Power Grid Tie Inverter. The 2nd Generation grid tie inverter, new technical, Higher efficiency. Higher MPPT efficiency, Max 99% Multiple intelligent protection to ensure safe use. Directly connect to three phase wind turbine, without regulator Easy to install and easy to operate. The Electric meter will SLOW down. The wind grid tie power inverter can obtain the wind energy from wind turbine, and can tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. The inverter can be connected to any outlets of utility grid at house. The small grid tie inverter monitors the volume, frequency and phase of the home utility grid, then produce pure sine wave AC power that the frequency and phase are as same as the grid’s, and the volume is a bit higher than the grid’s, then according to the current controlled PWM, to control the output power to the grid. The small grid tie inverter just puts out power when the home grid is on. When the wind turbine is rotating, and the output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produces power, and the grid tie inverter will change the power from wind turbine to the home grid. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these power from the inverters will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid. Why our grid tie inverters need limit function? — It is in response to the overwhelming clamor from our customers for a function that can control the amount of power that the grid tie inverters can generate. With this function, the inverters will just generate power that is not larger than the loads’ power even the inverters are connected with big power solar panel array, we call it “limit function”. Because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meter(the one provided by the electricity provider in the area) is not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumer will be charged for power even if it is given to the grid, and this is the problem. Our SUN G2 series grid tie inverters are integrated this limit function, so SUN G2 series inverters can work in limit mode or normal mode(no limit), you can make the configuration on the LCD display. Power Output : 1000W Input AC/DC Voltage Range : 22v 60V or 45V 90V AC Output Voltage Range : 95-140VAC /185-265VAC Output Frequency : 46Hz65Hz Standby Power Consumption. Wind power grid tie inverter —- 1pcs, 2. Dump load resistor —1pcs, 3. AC cable –1pcs , 4. Limiter sensor/clamp / cable —- optional. Q: Can this inverter work if power off? Grid tie inverter will stop to work if the grid is off. Q :Can this inverter be connected in Parallel? A : Yes, the grid tie inverter is stackable. You may connect two or more inverters to one big wind turbine.
1000W 3 Phase Wind Turbine Grid Tie Inverter Limiter DC 22-65V 45-90V SUN WAL
Category: 1000w | Comments Off
March 26

2000W on Grid Tie Inverter with Limiter Controller for 3 Phase 48V Wind Turbine

2000W-on-Grid-Tie-Inverter-with-Limiter-Controller-for-3-Phase-48V-Wind-Turbine-01-xq 2000W on Grid Tie Inverter with Limiter Controller for 3 Phase 48V Wind Turbine
2000W on Grid Tie Inverter with Limiter Controller for 3 Phase 48V Wind Turbine
2000W on Grid Tie Inverter with Limiter Controller for 3 Phase 48V Wind Turbine
2000W on Grid Tie Inverter with Limiter Controller for 3 Phase 48V Wind Turbine
2000W on Grid Tie Inverter with Limiter Controller for 3 Phase 48V Wind Turbine
2000W on Grid Tie Inverter with Limiter Controller for 3 Phase 48V Wind Turbine
2000W on Grid Tie Inverter with Limiter Controller for 3 Phase 48V Wind Turbine
2000W on Grid Tie Inverter with Limiter Controller for 3 Phase 48V Wind Turbine
2000W on Grid Tie Inverter with Limiter Controller for 3 Phase 48V Wind Turbine
2000W on Grid Tie Inverter with Limiter Controller for 3 Phase 48V Wind Turbine
2000W on Grid Tie Inverter with Limiter Controller for 3 Phase 48V Wind Turbine

2000W on Grid Tie Inverter with Limiter Controller for 3 Phase 48V Wind Turbine
2000W on Grid Tie Inverter with Limiter Controller for 3 Phase 48V Wind Turbine. Max Efficiency:>92% MPPT Efficiency:99%. AC 100V 110V 120V 220V 230V 240V 50hz 60hz. NEW 1000W Wind Power Grid Tie Inverter. Low cost and easy installation. Directly connect to three phase wind turbine. Much better output waveform compare with similiar GTI. Improving the efficiency of the entire wind power system. Overload protection, Anti-island protection. Short-circuit protection/Reverse polarity protection. AC output voltage and current THD. Input AC/DC Voltage Range. AC Output Voltage Range. 90-130V / 190VAC 260VAC. Dimensions (W x H x D). (1) (2) Dump load resistor connection Terminal. This terminals will connect to the dump load resistor. (3) AC socket, This socket will connect the inverter to the public grid via the AC cable. This terminals will connect to the wind turbine. The Inverter display can show many information, The main interface of the display and the icons explainations are show above. The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid. Select the internal limiter mode, inverter will work under limiter mode, output power of the inverter will be determined by load power. Select the external limiter mode, inverter need a external limiter module working with it. For more details about the limiter function, pls contact supplier. This function only useful with limiter type inverter. In this interface, the display shows real time power, PV input voltage, inside temperature, date and time. Clock And Date Setting. Set the clock and date in this page, save the setting before exit. Notes: Save the setting after you reconfigurate the working mode or backlight setting. Notes: Battery Discharge Current Mode And Battery Discharge Power Mode are not developed yet for this wind inverter. This interface will show the real time grid waveform. The grid voltage and frequency also will show in this interface. The energy interface will show the power generation curve everyday. Today KWH and Total KWH are also show in this page. AC Output Current Waveform and PF Test Of 2000W Model. Tested 2000W model at nearly full load, Output current waveform shows good pure sine wave in oscilloscope, PF value also shows in good result, 99.8% PF value. Advanced patented technology, MPPT efficiency is higher. High-quality imported components, more stable quality, lower failure rate. Significantly longer life, more than 10 years. Each inverter need to pass twice testing (20 hours) before leaving factory. Combination of SGPV does not interact. Improving the efficiency of the entire solar power system. No(Follow-up Tracking information will not be generated until the package arrives at the destination country). We will reply you within 24 hours. Feedback is important to us, we will leave positive to our customers. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem.
2000W on Grid Tie Inverter with Limiter Controller for 3 Phase 48V Wind Turbine
Category: 2000w | Comments Off
March 23

2000W Wind Turbine On Grid Tie Inverter Pure Sine Wave 45-90VDC 110V/ 220VAC

2000W-Wind-Turbine-On-Grid-Tie-Inverter-Pure-Sine-Wave-45-90VDC-110V-220VAC-01-bcv 2000W Wind Turbine On Grid Tie Inverter Pure Sine Wave 45-90VDC 110V/ 220VAC
2000W Wind Turbine On Grid Tie Inverter Pure Sine Wave 45-90VDC 110V/ 220VAC
2000W Wind Turbine On Grid Tie Inverter Pure Sine Wave 45-90VDC 110V/ 220VAC
2000W Wind Turbine On Grid Tie Inverter Pure Sine Wave 45-90VDC 110V/ 220VAC
2000W Wind Turbine On Grid Tie Inverter Pure Sine Wave 45-90VDC 110V/ 220VAC
2000W Wind Turbine On Grid Tie Inverter Pure Sine Wave 45-90VDC 110V/ 220VAC
2000W Wind Turbine On Grid Tie Inverter Pure Sine Wave 45-90VDC 110V/ 220VAC
2000W Wind Turbine On Grid Tie Inverter Pure Sine Wave 45-90VDC 110V/ 220VAC
2000W Wind Turbine On Grid Tie Inverter Pure Sine Wave 45-90VDC 110V/ 220VAC
2000W Wind Turbine On Grid Tie Inverter Pure Sine Wave 45-90VDC 110V/ 220VAC
2000W Wind Turbine On Grid Tie Inverter Pure Sine Wave 45-90VDC 110V/ 220VAC

2000W Wind Turbine On Grid Tie Inverter Pure Sine Wave 45-90VDC 110V/ 220VAC
2000W Wind Turbine On Grid Tie Inverter Pure Sine Wave 45-90VDC – 110V/ 220VAC. Max Efficiency:>92% MPPT Efficiency:99%. DC/3PHASE AC 22-65V/ 45V-90V. AC 100V 110V 120V 220V 230V 240V 50hz 60hz. NEW 1000W Wind Power Grid Tie Inverter. Low cost and easy installation. Directly connect to three phase wind turbine. Much better output waveform compare with similiar GTI. Improving the efficiency of the entire solar power system. Overload protection, Anti-island protection. Short-circuit protection/Reverse polarity protection. AC output voltage and current THD. Input AC/DC Voltage Range. AC Output Voltage Range. 90-130V / 190VAC 260VAC. Dimensions (W x H x D). (1) (2) Dump load resistor connection Terminal. This terminals will connect to the dump load resistor. (3) AC socket, This socket will connect the inverter to the public grid via the AC cable. This terminals will connect to the wind turbine. The Inverter display can show many information, The main interface of the display and the icons explainations are show above. The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid. Select the internal limiter mode, inverter will work under limiter mode, output power of the inverter will be determined by load power. Select the external limiter mode, inverter need a external limiter module working with it. For more details about the limiter function, pls contact supplier. This function only useful with limiter type inverter. In this interface, the display shows real time power, PV input voltage, inside temperature, date and time. Clock And Date Setting. Set the clock and date in this page, save the setting before exit. Notes: Save the setting after you reconfigurate the working mode or backlight setting. Notes: Battery Discharge Current Mode And Battery Discharge Power Mode are not developed yet for this wind inverter. This interface will show the real time grid waveform. The grid voltage and frequency also will show in this interface. The energy interface will show the power generation curve everyday. Today KWH and Total KWH are also show in this page. AC Output Current Waveform and PF Test Of 2000W Model. Tested 2000W model at nearly full load, Output current waveform shows good pure sine wave in oscilloscope, PF value also shows in good result, 99.8% PF value. Advanced patented technology, MPPT efficiency is higher. High-quality imported components, more stable quality, lower failure rate. Significantly longer life, more than 10 years. Each inverter need to pass twice testing (20 hours) before leaving factory. Combination of SGPV does not interact. No(Follow-up Tracking information will not be generated until the package arrives at the destination country). We will reply you within 24 hours. Feedback is important to us, we will leave positive to our customers. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem.
2000W Wind Turbine On Grid Tie Inverter Pure Sine Wave 45-90VDC 110V/ 220VAC
Category: 2000w | Comments Off
October 17

5000W On Grid-Tie Wind Turbine Inverter 5KW 3 Phase 380V Built in Controller

5000W-On-Grid-Tie-Wind-Turbine-Inverter-5KW-3-Phase-380V-Built-in-Controller-01-gdxz 5000W On Grid-Tie Wind Turbine Inverter 5KW 3 Phase 380V Built in Controller
5000W On Grid-Tie Wind Turbine Inverter 5KW 3 Phase 380V Built in Controller
5000W On Grid-Tie Wind Turbine Inverter 5KW 3 Phase 380V Built in Controller
5000W On Grid-Tie Wind Turbine Inverter 5KW 3 Phase 380V Built in Controller
5000W On Grid-Tie Wind Turbine Inverter 5KW 3 Phase 380V Built in Controller
5000W On Grid-Tie Wind Turbine Inverter 5KW 3 Phase 380V Built in Controller
5000W On Grid-Tie Wind Turbine Inverter 5KW 3 Phase 380V Built in Controller
5000W On Grid-Tie Wind Turbine Inverter 5KW 3 Phase 380V Built in Controller
5000W On Grid-Tie Wind Turbine Inverter 5KW 3 Phase 380V Built in Controller
5000W On Grid-Tie Wind Turbine Inverter 5KW 3 Phase 380V Built in Controller
5000W On Grid-Tie Wind Turbine Inverter 5KW 3 Phase 380V Built in Controller
5000W On Grid-Tie Wind Turbine Inverter 5KW 3 Phase 380V Built in Controller

5000W On Grid-Tie Wind Turbine Inverter 5KW 3 Phase 380V Built in Controller
5KW Wind Power Grid-tied Inverter. WWGIT50 is wind power grid-tied controller&inverter integrated machine with MPPT function. It looks concise and can be easily operated. Distributed wind power grid-tied system. Brid power grid-tied system. Ind power grid-tied system. Keep pressing the button for 5s to unload completely. And then recover by pressing it for another 5s. Switch “ON” the brake switch. Brake by over wind speed. It dumps load completely when reached the set wind speed, and recover automatically after working 10mins and wind speed is less than 15m/s. Brake by over rotational Speed. Unload completely when reached the set rotational speed, and recover automatically after 10mins. AC output over frequency. AC short circuit protection. Dump load, grid state, wind generator state, faults. Wind rotate speed, wind power, AC output voltage /current/power, and fault code. Dump load dimension(WHD). Dump load net weight. Note: Part of parameters can be adjusted according to customer. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “bayoung-electronic” and is located in this country: CN. This item can be shipped worldwide.
  • Type: Charger/Inverter
  • Brand: Bayoung
  • Application: Agriculture/Farming, Aquaculture, Back-up Power, Camping/Hiking, Commercial, Electronics, Home/Garden
  • Resistance Properties: Abrasion Resistant, Acid Resistant, Antimicrobial Resistant, Chemical Resistant, Childproof, Child Resistant, Corrosion Resistant, Dustproof
  • Current Rating: 16-20 A
  • Inverter Technology: Hybrid
  • Wattage: 5000-5999 W
  • Current Type: AC
  • System Configuration: Grid-Tie
  • Power Source: Wind
  • Features: All Daylight Conditions, Automatic Voltage Detection, Brushless Motor, Corrosion Resistant, Daylight Operation, Fixed Guyed, Flexible
  • Power: 5000W
  • Current Output: 20-29 A
  • Charging Mode: MPPT (Maximum Power Point Tracking)
  • Voltage: 380V
  • UPC: 710891214133

5000W On Grid-Tie Wind Turbine Inverter 5KW 3 Phase 380V Built in Controller
Category: 5000w | Comments Off
September 22

2000W Wind Power On Grid Tie Inverter 220V Output Wind Turbine Input 110V Mains

2000W-Wind-Power-On-Grid-Tie-Inverter-220V-Output-Wind-Turbine-Input-110V-Mains-01-nisd 2000W Wind Power On Grid Tie Inverter 220V Output Wind Turbine Input 110V Mains
2000W Wind Power On Grid Tie Inverter 220V Output Wind Turbine Input 110V Mains
2000W Wind Power On Grid Tie Inverter 220V Output Wind Turbine Input 110V Mains
2000W Wind Power On Grid Tie Inverter 220V Output Wind Turbine Input 110V Mains
2000W Wind Power On Grid Tie Inverter 220V Output Wind Turbine Input 110V Mains
2000W Wind Power On Grid Tie Inverter 220V Output Wind Turbine Input 110V Mains
2000W Wind Power On Grid Tie Inverter 220V Output Wind Turbine Input 110V Mains
2000W Wind Power On Grid Tie Inverter 220V Output Wind Turbine Input 110V Mains
2000W Wind Power On Grid Tie Inverter 220V Output Wind Turbine Input 110V Mains
2000W Wind Power On Grid Tie Inverter 220V Output Wind Turbine Input 110V Mains
2000W Wind Power On Grid Tie Inverter 220V Output Wind Turbine Input 110V Mains
2000W Wind Power On Grid Tie Inverter 220V Output Wind Turbine Input 110V Mains

2000W Wind Power On Grid Tie Inverter 220V Output Wind Turbine Input 110V Mains
2KW Wind Power Grid-tied Inverter. WWGIT20 is wind power grid-tied controller&inverter integrated machine with MPPT function. It looks concise and can be easily operated. Keep pressing the button for 5s to unload completely. And then recover by pressing it for another 5s. Switch “ON” the brake switch. Brake by over wind speed. It dumps load completely when reached the set wind speed, and recover automatically after working 10mins and wind speed is less than 15m/s. Brake by over rotational Speed. Unload completely when reached the set rotational speed, and recover automatically after 10mins. 85%110% of rated grid voltage. AC output over frequency. AC short circuit protection. Dump load, grid state, wind generator state, faults. Wind rotate speed, wind power, AC output voltage /current/power, and fault code. Dump load dimension(WHD). Dump load net weight. Note: Part of parameters can be adjusted according to customer. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “bayoung-electronic” and is located in this country: CN. This item can be shipped worldwide.
  • Type: Charger/Inverter
  • Brand: Bayoung
  • Application: Agriculture/Farming, Aquaculture, Back-up Power, Camping/Hiking, Commercial, Electronics, Home/Garden
  • Resistance Properties: Abrasion Resistant, Acid Resistant, Antimicrobial Resistant, Chemical Resistant, Childproof, Child Resistant, Corrosion Resistant, Dustproof
  • Current Rating: 11-20 A
  • Inverter Technology: Hybrid
  • Wattage: 2000-2499 W
  • Current Type: AC
  • System Configuration: Grid-Tie
  • Power Source: Wind
  • Features: All Daylight Conditions, Automatic Voltage Detection, Brushless Motor, Corrosion Resistant, Daylight Operation, Fixed Guyed, Flexible
  • Power: 1801-2000 W
  • Current Output: 10 A or Less
  • Charging Mode: MPPT (Maximum Power Point Tracking)
  • Voltage: 200-299 VAC

2000W Wind Power On Grid Tie Inverter 220V Output Wind Turbine Input 110V Mains
Category: 2000w | Comments Off
September 17

2KW Wind Grid Tie Inverter with Power Limiter DC45-90V for 3 Phase 48V Wind Turbine

2KW-Wind-Grid-Tie-Inverter-with-Power-Limiter-DC45-90V-for-3-Phase-48V-Wind-Turbine-01-jid 2KW Wind Grid Tie Inverter with Power Limiter DC45-90V for 3 Phase 48V Wind Turbine
2KW Wind Grid Tie Inverter with Power Limiter DC45-90V for 3 Phase 48V Wind Turbine
2KW Wind Grid Tie Inverter with Power Limiter DC45-90V for 3 Phase 48V Wind Turbine
2KW Wind Grid Tie Inverter with Power Limiter DC45-90V for 3 Phase 48V Wind Turbine
2KW Wind Grid Tie Inverter with Power Limiter DC45-90V for 3 Phase 48V Wind Turbine
2KW Wind Grid Tie Inverter with Power Limiter DC45-90V for 3 Phase 48V Wind Turbine
2KW Wind Grid Tie Inverter with Power Limiter DC45-90V for 3 Phase 48V Wind Turbine
2KW Wind Grid Tie Inverter with Power Limiter DC45-90V for 3 Phase 48V Wind Turbine
2KW Wind Grid Tie Inverter with Power Limiter DC45-90V for 3 Phase 48V Wind Turbine
2KW Wind Grid Tie Inverter with Power Limiter DC45-90V for 3 Phase 48V Wind Turbine

2KW Wind Grid Tie Inverter with Power Limiter DC45-90V for 3 Phase 48V Wind Turbine
1000W Solar Grid Tie Inverter Limiter Wechselrichter DC45-90V/DC26-60V to AC230V. 3500W 24VDC MPPT 100A Hybrid Inverter 230VAC 50Hz/60Hz Off Grid Solar Charger CE. 5.5KW Hybrid Inverter Solar Off Grid Inverter 5500W 48V 240V Built-in MPPT 100A. 5.5KW Solar Hybrid Inverter 48V 220V 100A MPPT Charge Controller PV Input 500VDC. 3KVA Hybrid Solar Inverter 220VAC 24VDC 50A PWM Pure Sine Wave Off Grid Inverter. 3000W Solar Inverter Hybrid 24VDC 220V Pure Sine Wave Off Grid Inverter PWM 50A. 600W Solar Grid Tie Micro Inverter DC30-55V to AC230V Pure Sine Wave Inverter CE. 600W Solar Grid Tie Microinverter DC11-32V to AC230V Pure Sine Wave Inverter CE. 1000W Solar Grid Tie Inverter DC10.8-30V to AC230V MPPT Pure Sine Wave Inverter. 1000W Grid Tie Micro Inverter MPPT DC20-45V to AC230V Pure Sine Wave Inverter CE. 1300W Solar Grid Tie Micro Inverter DC20-45V to AC230V Pure Sine Wave Inverter. 1400W Grid Tie Inverter DC22-50V for 24V/36V Solar Panel Pure Sine Wave Inverter. 300W Grid Tie Micro Inverter w/WIFI Communication DC30-60V for 30V 36V PV Panel. 600W MPPT Grid Tie Inverter for 36V Solar Panel Microinverter DC18-50V AC230V. 700W Solar Grid Tie Micro Inverter MPPT DC26-46V to AC230V for 36V Solar Panel. SG-DataBox For SG Series Microinverter 2.4G Wireless Communication & Monitoring. 600W Wechselrichter Solar Grid Tie Inverter DC22-50V/AC230V Micro Inverter IP65. 300W Grid Tie Inverter MPPT DC26-46V for 36V PV Panel Pure Sine Wave Inverter CE. 500W/600W/700W Solar Microinverter Grid Tie Inverter MPPT DC26-46V to AC230V CE. 120-180W Solar Microinverter Grid Tie Inverter DC16-26V for 12V PV Panel 220VAC. 3KVA Solar Hybrid Inverter 24VDC 230VAC Built-in 50A PWM Solar Charge Controller. 3KVA Off-Grid Wechselrichter 24VDC 230V Solar Hybrid Inverter Mit 50A Ladegerät. 3.5KW Off-Grid Solar Inverter 24V 220V 100A MPPT 500VDC PV Input Hybrid Inverter. 5.5KW Off-Grid Solar Inverter 48V 220V 100A MPPT 500VDC PV Input Hybrid Inverter. 2M 32.5mm AC Power Cable Used for SG Series Waterproof Grid Tie Inverter. 300/600W Solar Grid Tie Inverter DC26-46V to AC230V Pure Sine Wave Inverter IP65. 300W Solar Grid Tie Micro Inverter with WIFI DC30-60V for 30V 36V PV Panel MPPT. 600W Waterproof Grid Tie Inverter DC26-46V to AC230V Pure Sine Wave Inverter CE. 300W-700W Solar Wechselrichter Grid Tie Inverter DC18-50V to AC230V 50HZ/60HZ CE. 300W 350W Solar Grid Tie Inverter Pure Sine Wave DC26-46V Input AC230V Output CE. 1000W Solar Grid Tie Inverter with Power Limiter Sensor DC45-90V, AC110/220V Auto. 2000W Solar Wechselrichter Grid Tie Inverter with Limiter MPPT DC45-90V/AC230V. 600W Solar Grid Tie Micro Inverter MPPT AC230V for 12V Solar Panel/24V Battery. 600W Solar Wechselrichter Grid Tie Inverter DC30-55V for 30V/36V PV Panel AC230V. 600W Solar Grid Tie Micro Inverter for 12V/36V PV Panel Pure Sine Wave Inverter. 2KW Wind Grid Tie Inverter w/Power Limiter DC45-90V for 3 Phase 48V Wind Turbine. For European Union countries: If our German warehouse has stock, the package will be sent directly from the German warehouse. The test point should be at the DC side of the built-in rectifier of the inverter, but you can calculate from 3 phases of AC output voltage of the wind turbine to get the DC voltage, the formula is Vac = Vdc/1.732. For example, if the DC input voltage range of the inverter is 4590V, then the wind turbine’s output AC range of the should be 45/1.73290/1.732 = AC25.9V 51.96V. This model grid tie has designed for wind turbines that put out 3 phases AC voltage. It can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too big, and the dump load controlling system can’t keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. Wind Grid Tie Inverter with Limiter Sensor, which can prevent excess power from going to the public grid. Select the internal limiter mode, inverter will work under limiter mode, output power of the inverter will be determined by load power. The backlit LCD display gives you a clear picture of the inverter’s operating status. The status of errors will be displayed with red letters on the grid tie inverter LCD display. Easy installation, Can be paralleled on AC side. Overload protection, Anti-island protection, Short-circuit protection/Reverse polarity protection. We call a system combining with a small grid tie inverter and a wind turbine as “SGWT”. The small type of wind grid tie power inverter can obtain the wind energy from wind turbines and tie to the grid through its output cables with no extra equipment. The inverter can be connected to any outlets of the utility grid at the house. The small grid tie inverter monitors the volume, frequency, and phase of the home utility grid, producing pure sine wave AC power that the frequency and phase are the same as the grids. The small grid tie inverter puts out power when the home grid is on. When the AC wind turbine is rotating, and its output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produce power, and the grid tie inverter will change the power from the wind turbine to the home grid. When the total power of the electric appliance that is using in the house is larger than the output power of the inverters, this power from the inverters will be consumed in the house. This will slow down the power meter; otherwise, the difference of the output power of the inverter between the total used power of the appliance will go out from the house to the out grid. NOTE: Any DC power input is prohibited. The Advantage of Inverter. Directly connect to three phase wind turbine(48V AC Wind Turbine Generator). Plug and play, easy to install. Can be paralleled on AC side. Built-in dump Load controller. Each inverter need to pass twice testing (20 hours) before leaving factory. Wind Turbine Voltage Range:AC25.9V 51.96V. How to choose the correct wind AC output voltage? You can calculate from 3 phases of AC output voltage of the wind turbine to get the DC voltage, the formula is Vac = Vdc/1.732. Input AC/DC Voltage Range:45-90V. AC Output Voltage Range:90-260VAC. Peak Inverter Efficiency:92%. Power Factor:0.99. Output Wave Form:Pure Sine Wave. Over Current Protection:Yes. Over Temperature Protection:Yes. Reverse Polarity Protection:Yes. VDE-AR-N 4105:2018-11;DIN VDE V 0124-100:2020-06. Weight (Kg):7.48KG. Dimensions (W x H x D):43419688mm. Dump load resistor connection Terminal. This terminals will connect to the dump load resistor. AC socket, This socket will connect the inverter to the public grid via the AC cable. This terminals will connect to the wind turbine. The Inverter display can show many information, The main interface of the display and the icons explainations are show above. The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid. Save the setting after you reconfigurate the working mode or backlight setting. Installing Sunshine Grid Tie Power System involves several key steps. Considering the total capacity of the grid tie power system that you need. Choosing applicable wind turbine for Sunshine Grid Tie Inverter. Selecting accessory for installation of the Grid Tie Power System. Selecting correct model of Sunshine Grid Tie Inverter. Installing wind turbine to suitable place. Installing Sunshine Grid Tie Inverter to suitable place. Connecting Sunshine Grid Tie Power System with cables and connectors. Three Phases Grid Tie Power System. For example, installing a 6KW grid tie power system to three phase utility grid. The diagram is shown in Fig. 8, we seperate 6KW power sytem to three power system units, every unit has 2KW power. Connecting every system unit to different phase, this canbalance all grid tie power to three phases of the utility grid. Fllow this way, you can install more large grid tie power system to three phases, justseperate the whole power system to three equal power system units. Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods. (Only for Business Express). Feedback is very important to us. Please do not give us any bad feedback. If you can do as we say, we will be very grateful. Please give us the opportunity to resolve any problem. This item is in the category “Heimwerker\Erneuerbare Energie\Wechselrichter & Inverter”. The seller is “yonghui-de” and is located in this country: CN. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • Output Frequency: 46Hz~65Hz
  • Marke: Y&H
  • Stromquelle: Wind
  • Modell: 2KW Wind Grid Tie Inverter w/Limiter
  • Herstellungsland und -region: China
  • Output Wave Form: Pure Sine Wave
  • AC Output Voltage Range: 90-260VAC
  • Applied Standards: VDE-AR-N 4105:2018-11;DIN VDE V 0124-100:2020-06
  • Input AC/DC Voltage Range: 45-90V
  • Max. Power Output: 2000W
  • Inverter-Technologie: Mikroinverter
  • Anwendung: Heim/Garten

2KW Wind Grid Tie Inverter with Power Limiter DC45-90V for 3 Phase 48V Wind Turbine
Category: wind | Comments Off
August 27

2000W Wind Turbine Grid Tie Inverter Input 45-90V AC Output 110V AC with Limiter

2000W-Wind-Turbine-Grid-Tie-Inverter-Input-45-90V-AC-Output-110V-AC-with-Limiter-01-mdvf 2000W Wind Turbine Grid Tie Inverter Input 45-90V AC Output 110V AC with Limiter

2000W Wind Turbine Grid Tie Inverter Input 45-90V AC Output 110V AC with Limiter
2000W Wind Turbine Grid Tie Inverter Input 45-90V AC Output 110V AC w/ Limiter. Max Efficiency:>92% MPPT Efficiency:99%. DC/3PHASE AC 22-65V/ 45V-90V. AC 100V 110V 120V 220V 230V 240V 50hz 60hz. NEW 1000W Wind Power Grid Tie Inverter. Low cost and easy installation. Directly connect to three phase wind turbine. Much better output waveform compare with similiar GTI. Improving the efficiency of the entire Wind power system. Overload protection, Anti-island protection. Short-circuit protection/Reverse polarity protection. AC output voltage and current THD. Input AC/DC Voltage Range. AC Output Voltage Range. 90-130V / 190VAC 260VAC. Dimensions (W x H x D). (1) (2) Dump load resistor connection Terminal. This terminals will connect to the dump load resistor. (3) AC socket, This socket will connect the inverter to the public grid via the AC cable. This terminals will connect to the wind turbine. The Inverter display can show many information, The main interface of the display and the icons explainations are show above. The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid. Select the internal limiter mode, inverter will work under limiter mode, output power of the inverter will be determined by load power. Select the external limiter mode, inverter need a external limiter module working with it. For more details about the limiter function, pls contact supplier. This function only useful with limiter type inverter. In this interface, the display shows real time power, PV input voltage, inside temperature, date and time. Clock And Date Setting. Set the clock and date in this page, save the setting before exit. Notes: Save the setting after you reconfigurate the working mode or backlight setting. Notes: Battery Discharge Current Mode And Battery Discharge Power Mode are not developed yet for this wind inverter. This interface will show the real time grid waveform. The grid voltage and frequency also will show in this interface. The energy interface will show the power generation curve everyday. Today KWH and Total KWH are also show in this page. AC Output Current Waveform and PF Test Of 2000W Model. Tested 2000W model at nearly full load, Output current waveform shows good pure sine wave in oscilloscope, PF value also shows in good result, 99.8% PF value. Advanced patented technology, MPPT efficiency is higher. High-quality imported components, more stable quality, lower failure rate. Significantly longer life, more than 10 years. Each inverter need to pass twice testing (20 hours) before leaving factory. Combination of SGPV does not interact. Improving the efficiency of the entire solar power system. No(Follow-up Tracking information will not be generated until the package arrives at the destination country). We will reply you within 24 hours. Feedback is important to us, we will leave positive to our customers. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “bayoung-electronic” and is located in this country: CN. This item can be shipped worldwide.
  • Input Voltage: 2000W/45V-96V
  • Size: 434*196*88mm
  • Current Rating: 11-20 A
  • Inverter Technology: Hybrid
  • Model: GTINVT20
  • Maximum Input Power: 1801-2000 W
  • Wattage: 1500-1999 W
  • Current Type: AC/DC
  • System Configuration: Grid-Tie
  • Power Source: Wind
  • Type: Charger/Inverter
  • Features: All Daylight Conditions, Automatic Voltage Detection, Brushless Motor, Corrosion Resistant, Daylight Operation, Fixed Guyed, Flexible, Foldable, Freestanding
  • Color: Blue
  • Recommended Environment: Outdoor
  • Protection Properties: Anti-island Protection, Black Current Protection, Discharge Protection, Freeze Protection, Frost Protection, Lightning Protection, Low Voltage Protection, Open Circuit Protection, Overcharge Protection, Overcurrent Protection
  • Power: 1000 /2000 W
  • Current Output: 11-19 A
  • Brand: Bayoung
  • Application: Agriculture/Farming, Aquaculture, Automotive, Back-up Power, Camping/Hiking, Commercial, Electronics, Home/Garden, Irrigation, Marine
  • Charging Mode: MPPT (Maximum Power Point Tracking)
  • Resistance Properties: Abrasion Resistant, Acid Resistant, Antimicrobial Resistant, Chemical Resistant, Childproof, Child Resistant, Corrosion Resistant, Dustproof, Dust Resistant, Fade Resistant
  • Voltage: 41-50 V

2000W Wind Turbine Grid Tie Inverter Input 45-90V AC Output 110V AC with Limiter
Category: 2000w | Comments Off