May 14

1000W 2000W Grid Tie Solar Inverter Limiter/Wifi Port DC 22-60V/45-90V PV Kit

1000W-2000W-Grid-Tie-Solar-Inverter-Limiter-Wifi-Port-DC-22-60V-45-90V-PV-Kit-01-br 1000W 2000W Grid Tie Solar Inverter Limiter/Wifi Port DC 22-60V/45-90V PV Kit
1000W 2000W Grid Tie Solar Inverter Limiter/Wifi Port DC 22-60V/45-90V PV Kit
1000W 2000W Grid Tie Solar Inverter Limiter/Wifi Port DC 22-60V/45-90V PV Kit
1000W 2000W Grid Tie Solar Inverter Limiter/Wifi Port DC 22-60V/45-90V PV Kit
1000W 2000W Grid Tie Solar Inverter Limiter/Wifi Port DC 22-60V/45-90V PV Kit

1000W 2000W Grid Tie Solar Inverter Limiter/Wifi Port DC 22-60V/45-90V PV Kit
IMeshbean 1000W/2000W MPPT Solar Grid Tie Inverter Pure Sine Wave Power Limiter/ Wifi Port. Auto Switch PV System DC 20-60V/45-90V to AC 110-220V or 220V Stackable USA. Brand: iMeshbean 100% High Quality. We have proudly designed our own products and successfully created our own brands in the industries. In order to provide the peaceful shopping experience, our dedicated customer service teams can response to all the requests within 24 hours. We honor 30 days return on any products customers are not satisfied. Being our customer is a wise choice! It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Low cost and easy installation. Easy installation of solarmodules and grid tie inverter. It just needs very low maintenance costs. Free combination – It can be used as a separate grid tie system and can be setup as a large solar array withmany of them. Its quantity in the array is just according to your desire. Its Combination does not interact – The traditional solar grid tie system, they offer units ranging in high power output and these units aremodular so you can havemultiple units operating in parallel for large solar arrays. Improving the efficiency of the entire solar power system In traditional grid tie system, the solar panels are connected in series, so the MPPT of the inverter is according to the total panels in series, not to every panel, but there is difference between every panel, so not every panel is working at the maximum power, this will reduce the total power of these panel in series. Low power consumption Most of the parts in the small grid-tie inverter are digital ICs and low powerMCU, so the power consumption of it is low, though the quantity of grid tie inverter. Automatic current detection limit function. Internal limiter are settable. LCD Display The screen can display daily power generation & total power generation, real-time waveform display of the power grid, real-time voltage & current of solar energy system, real-time power, internal temperature , date and time. AC Output Frequency Range. 46 Hz – 65 Hz. Just for AC output. Depend on your own choiceeach Inverter have these following accessories. 1 x Solar Grid Inverter. 1 x AC cable. 1 x Internal type Limiter clamp with sensor cable. 1 x User Manual. A:DC input , for solar panels connectionpositive. B: DC input , for solar panels connectionnegative. C: Connector for external limiter(Not included). D: Connector for internal limiter (have been Integrated in the inverter, no need to connect). E: AC output , use AC cable to connect to home grid. Standard Grid Tie Inverter Model(one unit inverter). More than 1 unit inverters stackable. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. All excess power that is not needed by the load is then exported to the Grid. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Using Grid Tie Inverter With Limiter Model. 2.1 The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. 2.2 The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. 2.3 The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. Installation of GTIL With Internal Limiter. 3.1 This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. 3.2 External protective device including dc and ac SPD(Surge protection device), dc and ac breaker, etc is recommended to installed in the system. We are not responsible for undeliverable address. Pleas message us if recipient address changes needed before we fulfill the order. Sorry, no local pickups available. No need return the original one for low-valued items. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! The item “1000W 2000W Grid Tie Solar Inverter Limiter/Wifi Port DC 22-60V/45-90V PV Kit” is in sale since Tuesday, March 10, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “chargerangel” and is located in Pasadena, Texas. This item can be shipped to United States.
  • Inverter Technology: Microinverter
  • Style: Modern
  • Wattage: 1000W/2000W
  • System Configuration: Grid-Tie
  • Power Source: Solar
  • Features: Limiter Sensor/ClampOptional
  • Color: Blue
  • Voltage Input: DC 20-60/45-90V
  • MPN: Does Not Apply
  • Recommended Environment: Indoor
  • Protection Properties: Anti-Island Protection
  • Voltage Output: AC 110-220V(190V~260V) or AC 220V
  • Brand: iMeshbean

1000W 2000W Grid Tie Solar Inverter Limiter/Wifi Port DC 22-60V/45-90V PV Kit
Category: 1000w | Comments Off
December 21

1000W LCD Grid Tie Inverter battery discharge Inverteral limiter/WIFI optional

1000W LCD Grid Tie Inverter battery discharge Inverteral limiter/WIFI optional
1000W LCD Grid Tie Inverter battery discharge Inverteral limiter/WIFI optional
1000W LCD Grid Tie Inverter battery discharge Inverteral limiter/WIFI optional
1000W LCD Grid Tie Inverter battery discharge Inverteral limiter/WIFI optional
1000W LCD Grid Tie Inverter battery discharge Inverteral limiter/WIFI optional
1000W LCD Grid Tie Inverter battery discharge Inverteral limiter/WIFI optional

1000W LCD Grid Tie Inverter battery discharge Inverteral limiter/WIFI optional
1000GTIL2-LCD—-share the same program, but no clamp sensor would be sent if you choose model 1000G2-LCD. Latest updated program enable customers using battery discharge power mode. This is the 2. The first generation GTIL must be used with an additional limiter module, we also add an switch button to enable. The inverter either can work at limit mode or at normal grid tie mode. Generation GTIL, we integrated the limit function inside the GTI. Customer install inverter far away from the main circuit breaker, we also enable the 2. GTIL work with stand-alone limiter, we call this-external. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. Max input DC voltage. Peak power tracking voltage. 47.5-51.5 for 50hz; 59.3-60.5 for 60hz. Just for AC output. 20’C — +85’C. Settings Explainations on the LCD of the 2. The GTIL including various functions, all functions should configurate on the LCD setting page. Please see below explainations. Limit Mode:External limiter and Internal limiter are settable. Limit mode+External limiter both selected means work under external limiter mode. Limit mode+Internal limiter both selected means work under external limiter mode. LCD back light:Select it, Lcd will always on. Unselect it, Lcd will auto turn off after about 10s without any action on lcd button. Press any of the button to light lcd again. Remote Num:while using with wifi plug for monitoring, set by 1. While using with the WIFI-RTU(one rtu can monitoring multiple inverters), set monitored inverter numbers. Bat or solar limited current mode:This function is usable while using with battery. The setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level. Mppt function of the inverter will auto invalid when working under this setting. Set is 0.1V/step. Set is 0.1V/Step. The 22-65V type inverter will start up at 25V, and 45-90V type inverter will start up at 49.5V, after start, inverter can still work until 22v or 45v. Current sensor Orientation:Please check the current flow direction arrow on the sensor before use, make sure the connection is correct. Otherwise, inverter will not start up at limit mode. Negative power under AC voltage means power overflow to the grid. Positive means power come from the grid. Clamp Sensor with 2m cable—1pcs;(only available for 1000GTIL2-LCD). The item “1000W LCD Grid Tie Inverter battery discharge Inverteral limiter/WIFI optional” is in sale since Tuesday, June 12, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “sunhome910″ and is located in shanghai. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • Country/Region of Manufacture: China
  • MPN: Does Not Apply
  • Brand: Tricorpower
  • Type: Grid Tie Inverter

1000W LCD Grid Tie Inverter battery discharge Inverteral limiter/WIFI optional
Category: 1000w | Comments Off