October 31

Magnum Me-mgt500 Dual Mc4 Inputs Micro-inverter 500w 240vac Grid Tie Solar Power

Magnum Me-mgt500 Dual Mc4 Inputs Micro-inverter 500w 240vac Grid Tie Solar Power
Magnum Me-mgt500 Dual Mc4 Inputs Micro-inverter 500w 240vac Grid Tie Solar Power
Magnum Me-mgt500 Dual Mc4 Inputs Micro-inverter 500w 240vac Grid Tie Solar Power
Magnum Me-mgt500 Dual Mc4 Inputs Micro-inverter 500w 240vac Grid Tie Solar Power
Magnum Me-mgt500 Dual Mc4 Inputs Micro-inverter 500w 240vac Grid Tie Solar Power
Magnum Me-mgt500 Dual Mc4 Inputs Micro-inverter 500w 240vac Grid Tie Solar Power

Magnum Me-mgt500 Dual Mc4 Inputs Micro-inverter 500w 240vac Grid Tie Solar Power
MAGNUM ME-MGT500 DUAL MC4 INPUTS MICRO-INVERTER 500W 240VAC GRID TIE SOLAR POWER. Magnum Energy 500 Watt Grid-Tie Microinverter ME-MGT500. Set up your Grid Tie Solar Power System today – and be ready for Battery Backup later! With the Magnum Energy MicroGT 500 Microinverter , you are able to install 2 solar panels per inverter, reducing installation time, and saving on overall system cost. The microinverter has an individual MPPT for each panel, and can handle up to 310 watt panels, with minimal clipping, delivering 250 watts AC per module. And as with any microinverter, the module level electronics mitigate shading issues and increases overall system production and reliability. What’s UNIQUE about the MicroGT 500 Microinverter? With the 2:1 PV Module ratio, you need HALF the amount of inverters required for the job! Daisy-chain connection of microinverters with integrated AC and DC connections – no trunk cables required! (See AC and DC Connection Diagrams in our images). These micros are Storage Ready – AC couple them with Magnum MS-PAE battery based inverter allowing the addition of batteries to your system when you’re ready! Wider active harvesting range for MPPT tracking voltage! Less points of failure, less labor, and less overall cost/watt! Connect up to 14 solar panels per string, using just 7 GT500 Micros (w/a 20A breaker). Works with 60 and 72-cell modules. UL Certified (UL1741) and Rapid Shutdown compliant (NEC690.12). MagWeb GT Communication Unit (optional – but highly recommended) provides unified display of microinverter production, PAE, and battery status. Additional copper grounding wire will be needed, in connection with the Micro GT’s grounding lug, to ground the system. Or a WEEB may be used between the racking and microinverter. AC Branch Connection Cable has female connector at one end and bare wire at other to connect the junction box to the first microinverter. Weatherproof protective endcap for capping the end of the branch circuit on last microinverter. No diversion controller needed for loads – the MicroGT is optimized to taper charge on the batteries, and prevent them from being overcharged. It will slowly back off charging as the battery fills, and turn off when the battery is full. The AC Coupled Support mode is a control method that causes the output frequency of the MS-PAE battery-base inverter to decrease – causing the output power of the Micro GT grid-tie inverter to decrease, in an attempt to maintain the battery voltage around Absorb voltage. The AC output of the MS-PAE battery based inverter should be greater than the potential array AC output. UP TO 50% DISCOUNTS. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. See our other items. Magnum Energy 500 Watt Grid-Tie Microinverter ME-MGT500 Set up your Grid Tie Solar Power System today – and be ready for Battery Backup later! With the Magnum Energy MicroGT 500 Microinverter, you are able to install 2 solar panels per inverter, reducing installation time, and saving on overall system cost. The item “MAGNUM ME-MGT500 DUAL MC4 INPUTS MICRO-INVERTER 500W 240VAC GRID TIE SOLAR POWER” is in sale since Friday, September 15, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “hurricanewindpowercom” and is located in Roanoke, Virginia. This item can be shipped worldwide.
  • Brand: Magnum Energy
  • Model: ME-MGT500 Micro-Inverter
  • MPN: ME-MGT500
  • Country/Region of Manufacture: United States

Magnum Me-mgt500 Dual Mc4 Inputs Micro-inverter 500w 240vac Grid Tie Solar Power
Category: magnum | Comments Off
May 11

Magnum MS4024PAE Inverter charger 120/240 grid tie all the whistles and bells

Magnum MS4024PAE Inverter charger 120/240 grid tie all the whistles and bells
Magnum MS4024PAE Inverter charger 120/240 grid tie all the whistles and bells
Magnum MS4024PAE Inverter charger 120/240 grid tie all the whistles and bells

Magnum MS4024PAE Inverter charger 120/240 grid tie all the whistles and bells
Magnum MS4024PAE Inverter/Charger Complete Kit. 1 Magnum ME-RC50 Digital LCD Display Remote Panel with 50′ Cable. 1 Magnum Battery Temperature Sensor. 1 Magnum MS4024PAE Inverter/Charger, 4000W, 24VDC, Pure Sine Wave. 1 Magnum MMP250-30D Mini Panel (pre-wired) with 250Amp main breaker and two 30Amp breakers. 1 Magnum BP-MMP Back Plate (for easy mounting on a wall while being code approved). The MS-PAE Series Inverter/Charger includes the following. High wattage output in a small footprint – less weight and area needed for install. Ability to parallel up to four identical MS-PAE inverters to increase output power capability (requires ME-RTR). Large AC access and terminal block [wire size: #18 to #2 AWG (0.82 to 33.6 mm2) CU]. DC terminal covers with 360 degree connection. Pure sine wave output (<5% THD). 120/240 VAC Split phase output in a single inverter. PFC (Power Factor Corrected) multi-stage battery charger. RS485 standard communication protocol. Remote and Network ports (easy connection for optional accessories). ON/OFF Inverter-mounted switch with LED indicator. Battery Temperature Sensor - for optimum charging during extreme temperature changes. Field Serviceable for qualifi ed personnel - tested repair kits available. Smooth, aesthetically pleasing design. MS4024PAE and MS4448PAE are ETL listed to UL/cUL STD 1741 and CSA STD 22.2 107.01-01 for safety. The MS-PAE Series Inverter/Charger from Magnum Energy is a pure sine wave inverter designed specifically for the most demanding renewable energy applications. When the power requirements of the system are beyond the capacity of a single MS-PAE Series inverter or the system is expanded as more loads are added, up to four MS-PAE Series inverters can be connected together in a parallel configuration. When connecting inverters in parallel, the overall inverter power and surge capacity is increased to power a large single load or more smaller loads. Available in 4000 (24 volts) watt models, the MS-PAE Series inverters are powerful, easy-to-use and ETL listed to the stringent requirements of UL 1741 and CSA C22.2 No. 107.1-01 for Renewable Energy installations. Pure Sine Wave: Power your T. S, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%. Choices: The MS-PAE Series comes in 24 volt configurations, allowing you to choose the model that is right for you. Versatile Mounting: Mount the MS-PAE Series on a shelf or wall. Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance. Multiple Ports: The MS-PAE Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port. The extra large AC access cover with terminal screw block and 360°DC connection terminals with covers make this inverter more accessible when it needs to be. The MS-PAE Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator. MMP250-30D Mini Panel The MMP (Mini Magnum Panel) has been specifically designed to combine all of the major components required for a renewable energy system inverter/battery disconnect, AC overcurrent protection, grounding connections, and a full system inverter bypass switch as a convenient way to isolate the inverter for battery maintenance into a single, easy to install pre-wired enclosure. Designed for single inverter applications, the MMP enclosure features convenient front panel operation, and with the optional front panel remote, allows you to easily set up, monitor, and operate your Magnum inverter system. BP-MMP The BP-MMP is a single-piece, powder-coated steel back plate designed to accommodate the MMP enclosure, a Magnum inverter, and the inverter hood together; making the complete system appear more seamless. Designed with PEM i. The BP-MMP back plate is also used to provide the necessary requirement to provide a noncombustible mounting surface required when mounting the inverter on a wall. ME-RC50 The ME-RC Remote Control communicates with the inverter to easily operate and monitor your inverter and charger from a remote location. This Remote Control has an easy-to-read LCD screen and displays the inverter/charger status with the at a glance LEDs. Soft keys provide simple access to menus and a rotary encoder knob allows you to scroll through and easily configure the adjustable settings in the inverter (or any connected accessory) and maintain the critical settings in nonvolatile memory. The ME-RC also has the option of controlling the ME-AGS Automatic Gen Start and the ME-BMK Battery Monitor Kit (requires revision 2.0 or higher remote) using a network connection to the inverter. This remote has convenient finger-tip operation, including the new one-knob programming. MP-HOOD The MP-HOOD a single-piece, powder-coated steel cover plate. It is designed to allow a Magnum inverter to be mounted vertically and prevent items from falling into the ventilation openings in the top of the inverter. Inside our store, Missouri Wind and Solar. A REAL STORE WITH REAL PEOPLE. YOU CAN ACTUALLY COME IN AND TRY OUR PRODUCTS AND SEE THEM WORKING. Products may be slightly different than the ones pictured. If our supplier runs short of the products shown, we will substitute them for the same quality or better. The item "Magnum MS4024PAE Inverter charger 120/240 grid tie all the whistles and bells" is in sale since Friday, June 12, 2015. This item is in the category "Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters". The seller is "missouriwind" and is located in Seymour, Missouri. This item can be shipped to United States.
  • Brand: Magnum
  • Model: MS4024PAE Inverter charger 120/240 grid tie
  • MPN: MS4024PAE Inverter charger 120/240 grid tie
  • Country/Region of Manufacture: United States

Magnum MS4024PAE Inverter charger 120/240 grid tie all the whistles and bells
Category: magnum | Comments Off
December 18

Magnum MS4024PAE Inverter Charger 120/240 Grid Tie ALL THE BELLS AND WHISTLES

Magnum MS4024PAE Inverter Charger 120/240 Grid Tie ALL THE BELLS AND WHISTLES

Magnum MS4024PAE Inverter Charger 120/240 Grid Tie ALL THE BELLS AND WHISTLES
This Magnum KIT includes: 1 x Magnum MS4024PAE Inverter/Charger, 4000W, 24VDC, Pure Sine Wave 1 x Magnum MMP250-30D Mini Panel (pre-wired) with 250Amp main breaker and two 30Amp breakers 1 x Magnum BP-MMP Back Plate for easy mounting on a wall, code approved! 1 x Magnum ME-RC50 Digital LCD Display Remote Panel with 50′ Cable 1 x Magnum MP-HOOD 1 x Magnum Battery Temperature Sensor. The MS-PAE Series Inverter/Charger from Magnum Energy is a pure sinewave inverter designed specifically for the most demanding renewable energy applications. When the power requirements of the system are beyond the capacity of a single MS-PAE Series inverter or the system is expanded as more loads are added, up to four MS-PAE Series inverters can be connected together in a parallel configuration. When connecting inverters in parallel, the overall inverter power and surge capacity is increased to power a large single load or more smaller loads. Available in 4000 (24 volts) and 4400 (48 volts) watt models, the MS-PAE Series inverters are powerful, easy-to-use and ETL listed to the stringent requirements of UL 1741 and CSA C22.2 No. 107.1-01 for Renewable Energy installations. The MS-PAE Series Inverter/Charger includes the following. High wattage output in a small footprint – less weight and area needed for install. Ability to parallel up to four identical MS-PAE inverters to increase output power capability (requires ME-RTR). Pure sine wave output (<5% THD). 120/240 VAC Split phase output in a single inverter. PFC (Power Factor Corrected) multi-stage battery charger. RS485 standard communication protocol. Remote and Network ports (easy connection for optional accessories). ON/OFF Inverter-mounted switch with LED indicator. Large AC access and terminal block [wire size: #18 to #2 AWG (0.82 to 33.6 mm2) CU]. DC terminal covers with 360 degree connection. Battery Temperature Sensor - for optimum charging during extreme temperature changes. Field Serviceable for qualifi ed personnel - tested repair kits available. Smooth, aesthetically pleasing design. MS4024PAE and MS4448PAE are ETL listed to UL/cUL STD 1741 and CSA STD 22.2 107.01-01 for safety. 18 - 34.0 VDC. Nominal AC output voltage. 120/240 VAC split phase. Output frequency and accuracy. 60 Hz ± 0.04%. Total Harmonic Distortion (THD). 1 msec surge current (amps AC). L-N: 120, L-L 70. 100 msec surge current (amps AC). L-N: 72, L-L 40. 5 sec surge power (real watts). 30 sec surge power (real watts). 5 min surge power (real watts). 30 min surge power (real watts). Maximum continuous input current. Power Consumption - inverting (no load). Continuous Output at 25 ºC. Input current at rated output (AC amps). 15 AAC per leg at 120/240 VAC split phase. General Features and Capabilities. 2 legs at 30A per leg transfer standard on all models. Five stage charging capability. Bulk, Absorb, Float, Equalize, and Battery Saver. Standard with included temp sensor (battery temp 0 to 50° C). 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans. Yes, with two overlapping circuits. Yes on transformer, MOSFETS, and battery. Conformal coating on PCBs for corrosion protection. Powder coated chassis & top for corrosion protection. Stainless steel fasteners for corrosion protection. ETL Listed to UL1741 and CSA STD C22.2 No. 20° C to +60° C (-4° F to 140° F). 40° C to +70° C (-40° F to 158° F). 0 to 95% RH non condensing. Dimensions (l x w x h). 13.75 x 12.65 x 8.0 (34.9 cm x 32.1 cm x 20.3 cm). Shelf or wall (vents not allowed to face downward unless ME-HOOD and ME-CB are installed). 15,000' (4570 m). Sellers: Add a FREE map to your listings. The item "Magnum MS4024PAE Inverter Charger 120/240 Grid Tie ALL THE BELLS AND WHISTLES" is in sale since Tuesday, December 17, 2013. This item is in the category "Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters". The seller is "hurricanewindpowercom" and is located in Roanoke, Virginia. This item can be shipped worldwide.
  • Brand: Magnum Energy
  • Model: MS4024PAE
  • Country of Manufacture: United States

Magnum MS4024PAE Inverter Charger 120/240 Grid Tie ALL THE BELLS AND WHISTLES
Category: magnum | Comments Off