August 25

1500W Grid Tie Solar System Kit 8 pcs 195W Solar Panel & 2KW Grid Tie Inverter

1500W-Grid-Tie-Solar-System-Kit-8-pcs-195W-Solar-Panel-2KW-Grid-Tie-Inverter-01-ozxs 1500W Grid Tie Solar System Kit 8 pcs 195W Solar Panel & 2KW Grid Tie Inverter
1500W Grid Tie Solar System Kit 8 pcs 195W Solar Panel & 2KW Grid Tie Inverter
1500W Grid Tie Solar System Kit 8 pcs 195W Solar Panel & 2KW Grid Tie Inverter
1500W Grid Tie Solar System Kit 8 pcs 195W Solar Panel & 2KW Grid Tie Inverter
1500W Grid Tie Solar System Kit 8 pcs 195W Solar Panel & 2KW Grid Tie Inverter
1500W Grid Tie Solar System Kit 8 pcs 195W Solar Panel & 2KW Grid Tie Inverter
1500W Grid Tie Solar System Kit 8 pcs 195W Solar Panel & 2KW Grid Tie Inverter
1500W Grid Tie Solar System Kit 8 pcs 195W Solar Panel & 2KW Grid Tie Inverter
1500W Grid Tie Solar System Kit 8 pcs 195W Solar Panel & 2KW Grid Tie Inverter
1500W Grid Tie Solar System Kit 8 pcs 195W Solar Panel & 2KW Grid Tie Inverter

1500W Grid Tie Solar System Kit 8 pcs 195W Solar Panel & 2KW Grid Tie Inverter
ECO-WORTHY 1500W Grid Tie Mono Solar System Kit W/ 2000W 220V Grid Tie Inverter. High modules conversion efficiency. Excellent performance in low light environments. Fully self powered off-grid systems. Suitable for commercial and power station property. 195W Mono solar panel. Short circuit current(Isc). Open circuit voltage(Vmp). 12AWG(2.79ft long). Maximum AWG Size Range. Nominal Operating Cell Temperature(NOCT). Temperature Coefficient of Pmax. Temperature Coefficient of Voc. Temperature Coefficient of Isc. 2000W Grid Tie Power Inverter. AC Output Voltage Range. AC Output Frequency Range. 51.5x30x15cm(20.3″x11.8″x5.9). 1 pc 10m solar cable w/ 1 pair MC4 connector. For movable, suspended or fixed installation in photovoltaic systems at temperatures ranging from -40 to +120 For use indoors, outdoors, in explosive areas, and in industrial, commercial, and agricultural applications. Which with 3 male and 3 female of MC4 connector. To Connect Each Solar Panel in Series or in Parallel. One Male/Male/Female(MMF) Branch Connector One Female/Female/Male(FFM) Branch Connector. 8pcs 195W Mono Solar Panel. 1pcs 2000W 220V Grid Tie Power Inverter. 1 pair 5m solar cable. 1 pairs Y MC4 connectors. The item “1500W Grid Tie Solar System Kit 8 pcs 195W Solar Panel & 2KW Grid Tie Inverter” is in sale since Thursday, August 22, 2019. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Solar Power Supplies\Solar Panels & Kits”. The seller is “17winsunpower” and is located in Los Angeles, California. This item can be shipped to North, South, or Latin America.
  • Brand: ECO-WORTHY
  • Model: Gird Tie Solar System
  • MPN: L02M195-IMUS-8
  • Application: Home/Garden
  • Wattage: 1500W/1560W
  • UPC: 607052789985
  • EAN: 0607052789985
  • Marke: L02M195

1500W Grid Tie Solar System Kit 8 pcs 195W Solar Panel & 2KW Grid Tie Inverter
Category: 1500w | Comments Off
June 3

1500W MPPT Solar Power Grid Tie Inverter Pure Sine Wave DC45-90V TO AC110V

1500W MPPT Solar Power Grid Tie Inverter Pure Sine Wave DC45-90V TO AC110V
1500W MPPT Solar Power Grid Tie Inverter Pure Sine Wave DC45-90V TO AC110V

1500W MPPT Solar Power Grid Tie Inverter Pure Sine Wave DC45-90V TO AC110V
1500W Grid Tie Solar Power inverter 45V-90VDC Input, 110VAC Output. Small Grid Tie Photovoltaic System (SGPV) Pure Sine Wave- Maximum Power Point Tracking function(MPPT) Peak Inverter Efficiency: 94% Stackable (connect in parallel for higher output) Island protection: Inverter will shut down during black outs. Simple and safe installation- Reverse polarity protection Constant Power Output Low distortion output on all ranges Allow different Power factor from loads LED display RoHS Compliant. Connect the Solar Panel DC supply cables to the DC input terminal of the inverter, be sure that the polarity is correct. Recommended DC input cable size for maximum output is 8AWG or cables that can handle more than 30A. Optimal length would be less than 8m, longer cables will experience higher voltage drop. Connect the supplied AC power cord to the inverter and plug it to a home wall socket. The 3 green LED indicators will start to cycle from left to right when the grid and DC supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being output from the solar panels. The more big output power is, the more fast the rate is. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, and this is called Island Protection. No need return the original one for low-valued items. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! Pleas message us if recipient address changes needed before we fulfill the order. Sorry, no local pickups available. The free listing tool. The item “1500W MPPT Solar Power Grid Tie Inverter Pure Sine Wave DC45-90V TO AC110V” is in sale since Tuesday, January 06, 2015. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “chargerangel” and is located in Hayward, California. This item can be shipped to United States, to Canada, to Mexico.
  • Brand: Mass power
  • MPN: Does Not Apply

1500W MPPT Solar Power Grid Tie Inverter Pure Sine Wave DC45-90V TO AC110V
Category: 1500w | Comments Off
April 29

1500W Grid Tie Inverter for Wind Turbine Pure Sine Wave AC/DC To AC 110V/230 LCD

1500W Grid Tie Inverter for Wind Turbine Pure Sine Wave AC/DC To AC 110V/230 LCD
1500W Grid Tie Inverter for Wind Turbine Pure Sine Wave AC/DC To AC 110V/230 LCD
1500W Grid Tie Inverter for Wind Turbine Pure Sine Wave AC/DC To AC 110V/230 LCD
1500W Grid Tie Inverter for Wind Turbine Pure Sine Wave AC/DC To AC 110V/230 LCD
1500W Grid Tie Inverter for Wind Turbine Pure Sine Wave AC/DC To AC 110V/230 LCD
1500W Grid Tie Inverter for Wind Turbine Pure Sine Wave AC/DC To AC 110V/230 LCD

1500W Grid Tie Inverter for Wind Turbine Pure Sine Wave AC/DC To AC 110V/230 LCD
1500W LCD Grid Tie Inverter with Dump Load for 3 Phase Wind Turbine Generator MPPT Pure Since Wave Wind On Grid Inverter. For 3 Phase AC Output Wind Turbine. Build In Dump Load Controlle. Build In High Wind Protection. The grid-tie inverter can transfer wind energy from wind generators directly into the home grid using no extra equipment. It can be connected to any outlet (conventional network) in the home. The grid-tie inverter controls the phase and the frequency and voltage of the power generated by the wind generator. It produces a pure sine-wave and matches that of the grid. This model grid-tie has build in bridge rectifier and dump load controller, it can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too big, and the dump load controlling system cant keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. On the LCD Panel of the inverter, there is one AC output socket, that will connect the AC output cable to home grid. The LCD display will display the grid AC voltage, current , active power and electric. Electric parameters measurement function voltage, current and active power, electric. Running time function (record load cumulative working hours). Power down data save function (save the number of kWh, operation time). Large screen LCD display (display voltage, current, power, active power, cumulative running time). UP: Short press will display power, electricity, current and voltage in anti-sequence. DOWN: Short press will display power, electricity, current and voltage in sequence. BACK LIGHT: Short press will open or close backlight. Grid Tie Inverter 1500W. 1 Piece User Manual (English). We can offer original photoes and t. Normal AC Output Power. Maximum AC Output Power. AC Output Voltage Range. AC Output Frequency Range. Total Harmonic Distortion(THD). (the test point is at the output of the rectifier). 92%(Consumption of the rectifier is not calculated). 7-10 / 2-7 work days. 12-15 / 2-7 work days. Italy, France, Germany, Russia, Brazil, Argentina. 25-30 / 2-7 work days. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. The item “1500W Grid Tie Inverter for Wind Turbine Pure Sine Wave AC/DC To AC 110V/230 LCD” is in sale since Thursday, April 14, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “yoosmart-com” and is located in Shenzhen. This item can be shipped to North, South, or Latin America, to all countries in Europe, to all countries in continental Asia.
  • Brand: Y-SOLAR
  • Model: YS-1500G
  • Country/Region of Manufacture: China
  • Frequency:: 46Hz ~ 65Hz
  • Certification: CE ROHS
  • Type: Pure sine wave inverter
  • Function: With MPPT
  • MPN: YS-1500G

1500W Grid Tie Inverter for Wind Turbine Pure Sine Wave AC/DC To AC 110V/230 LCD
Category: 1500w | Comments Off
April 12

1500W Pure Sine Wave Grid Tie Inverter For 3 Phase Wind Turbine With Dump LCD

1500W Pure Sine Wave Grid Tie Inverter For 3 Phase Wind Turbine With Dump LCD
1500W Pure Sine Wave Grid Tie Inverter For 3 Phase Wind Turbine With Dump LCD
1500W Pure Sine Wave Grid Tie Inverter For 3 Phase Wind Turbine With Dump LCD
1500W Pure Sine Wave Grid Tie Inverter For 3 Phase Wind Turbine With Dump LCD
1500W Pure Sine Wave Grid Tie Inverter For 3 Phase Wind Turbine With Dump LCD
1500W Pure Sine Wave Grid Tie Inverter For 3 Phase Wind Turbine With Dump LCD

1500W Pure Sine Wave Grid Tie Inverter For 3 Phase Wind Turbine With Dump LCD
1500W LCD Grid Tie Inverter with Dump Load for 3 Phase Wind Turbine Generator MPPT Pure Since Wave Wind On Grid Inverter. For 3 Phase AC Output Wind Turbine. Build In Dump Load Controlle. Build In High Wind Protection. The grid-tie inverter can transfer wind energy from wind generators directly into the home grid using no extra equipment. It can be connected to any outlet (conventional network) in the home. The grid-tie inverter controls the phase and the frequency and voltage of the power generated by the wind generator. It produces a pure sine-wave and matches that of the grid. This model grid-tie has build in bridge rectifier and dump load controller, it can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too big, and the dump load controlling system cant keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used. On the LCD Panel of the inverter, there is one AC output socket, that will connect the AC output cable to home grid. The LCD display will display the grid AC voltage, current , active power and electric. Electric parameters measurement function voltage, current and active power, electric. Running time function (record load cumulative working hours). Power down data save function (save the number of kWh, operation time). Large screen LCD display (display voltage, current, power, active power, cumulative running time). UP: Short press will display power, electricity, current and voltage in anti-sequence. DOWN: Short press will display power, electricity, current and voltage in sequence. BACK LIGHT: Short press will open or close backlight. Grid Tie Inverter 1500W. 1 Piece User Manual (English). We can offer original photoes and t. Normal AC Output Power. Maximum AC Output Power. AC Output Voltage Range. AC Output Frequency Range. Total Harmonic Distortion(THD). (the test point is at the output of the rectifier). 92%(Consumption of the rectifier is not calculated). 7-10 / 2-7 work days. 12-15 / 2-7 work days. Italy, France, Germany, Russia, Brazil, Argentina. 25-30 / 2-7 work days. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. The item “1500W Pure Sine Wave Grid Tie Inverter For 3 Phase Wind Turbine With Dump LCD” is in sale since Monday, April 11, 2016. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “solarregulator” and is located in Shenzhen. This item can be shipped to North, South, or Latin America, to all countries in Europe, to all countries in continental Asia.
  • Brand: Y-SOLAR
  • Model: YS-1500G
  • Country/Region of Manufacture: China
  • Frequency:: 46Hz ~ 65Hz
  • Certification: CE ROHS
  • Type: Pure sine wave inverter
  • Function: With MPPT
  • MPN: YS-1500G

1500W Pure Sine Wave Grid Tie Inverter For 3 Phase Wind Turbine With Dump LCD
Category: 1500w | Comments Off
March 27

1500W LCD mppt solar grid tie inverter DC45-90V AC 230V

1500W LCD mppt solar grid tie inverter DC45-90V AC 230V

1500W LCD mppt solar grid tie inverter DC45-90V AC 230V
THIS INVERTER INCLUDES LCD. PLEASE INDICATE YOUR COUNTRY VOLTAGE AND THIS DOES NOT INCLUDE THE LIMITER BUT CAN WORK WITH THE LIMITER. IF YOU ARE INTERESTED IN THE LIMITER PLEASE INDICATE. The grid tie inverters. (GTI) can generate so that the amount of excess power produced by the solar panels are. Reduced to insignificant levels, if not eliminated — because in some countries. The producer pays for the excess power it gives to the distribution grid. Is because the electric power meters the one provided by the electricity provider in the. Area are not aware of the direction of power flow. In other words it only adds even if. Power is exported to the grid, thus, the consumers will be charged for power even if it is. Given to the grid, and this is the problem. On-Grid System Using Standard Grid Tie Inverter. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels. To the AC load. All excess power that is not needed by the load is then exported to the Grid. If the Grid fails, then the Grid Tie Inverter will turn off. When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power. Will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. On-Grid System Using Grid Tie Inverter With Limiter (GTIL). The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid. The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time. The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically. The Limiter Module-Parts Description. Displays the Utility Power (grid power), Inverter Power (GTIL power), Utility KWH and Inverter KWH. AC Receptacle For GTIL AC output. Two (2 pcs) – Connects the AC output of GTIL to LM. Can be plug in either receptacle. Maximum Power per receptacle is 2kw or a total of 4kw GTIL can be plugged in the two receptacles. The output of GTIL can also be directly connected to the grid or through the house convenient outlet. But the LCD will not display the Inverter Power. Connects/clamps to one hot wire after the Main Circuit Breaker. Converts the magnetic field created by the flow of current in the wire into small AC voltage and current which is proportional to the power that passes through the wire. Clamp sensor AC signal socket connects the clamp sensor AC signal to the LM module. Terminal Block- AC power to Grid. The AC output of the GTIL is plugged to the LM receptacle in order for the LCD to display the GTIL output in watts and KWH. The GTIL output is connected to the Grid through the Terminal Block. Connecting the terminal block to AC grid also powers the wattmeter and limiter circuit. Limiter DC Signal Output, 2 pcs Connects the LM output signal to the GTIL signal input. User can connect to any of the signal output receptacle. This is the ideal installation. The GTIL unit and the Limiter Module are placed close to each other. The signal wires will be short, as supplied with the unit. Use a dedicated 20 A breaker for the GTIL in the Load Circuit breaker panel board. Wiring and Connection Procedure. After the GTIL and LM are properly installed. Shut off the main circuit breaker. Connect the clamp sensor to one hot wire after the main breaker. Connect the other end of clamp sensor signal cable to the LM. Neatly lay out the signal cable. You can now safely open the Main breaker. Connect the LM module to grid. Using the terminal block, use atleast wire no. 12 AWG (20A ampacity – wire not included in the package) and connect to 20A circuit breaker dedicated for the GTIL. Make sure the 20A breaker is off while wiring. Do not turn on the breaker! Connect the DC signal cable from LM to GTIL input. The connectors have threaded screw to securely fasten the connectors plug at both ends of the cable. Also the connector plugs have dent/slot in the plugs body so it can only be connected in one direction or position. Connect the Solar panel output to the DC power input of GTIL. Make sure the disconnect switch/breaker of solar panel is off. Review all connections and make sure of the tightness of plugs and connections. Re-check DC polarity connections of solar panel. Turn on the 20A circuit breaker to power the Limiter Module. In the LM, Press SET button below the LCD for a few seconds. The LCD will light up and initialize. After initialization, LCD will display Utility Power, which is the actual power or total load in real time. Press the up and down buttons to display the Inverter Power, Utility power, Utility Total KWH and Inverter Total KWH. Inverter Power should read zero initially. To reset the Utility Total, just press the up button for a few seconds and you will be prompted yes or no to reset. Press up or down button to select either yes or no, and then press SET to reset. To reset Inverter Total, press the down button continuously and you will prompted yes or no also to reset. Press up or down to select yes or no and Press SET to reset. Connect the GTIL power output to the LM AC receptacle using the supplied cable. Turn on the disconnect switch/dc breaker of solar panel. The wattmeter in the GTIL should power up and start producing power after a minute or two. Check the LM display. The utility power should display 0-15w indicating the GTIL is already supplying power to the load. Check the inverter power display in the LCD. To shutdown, turn-off or unplug first the GTIL before disconnecting the power to limiter module. Or shut off the breaker to LM module to cut power to whole set-up. Do not disconnect Solar panel connection to GTIL while the system is operating. In normal operation, when the unit is started or the LM breaker is turned on, while all the cables are connected and DC breaker is on, there will be about 2 minutes and 20seconds time delay before the GTIL unit will run. Always remember that for LM module to power-up, need to press Set buttons first in the LM module for the system to run. Remote Installation of GTIL and LM. Users may require that GTIL will need to be remotely installed or away from the Circuit Breakers Panel Board. In so doing, the Signal cable will need to be made much longer. The maximum cable length that can be used is 30m. The item “1500W LCD mppt solar grid tie inverter DC45-90V AC 230V” is in sale since Tuesday, November 10, 2015. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “jadoni1982″ and is located in Ningbo, Zhejiang. This item can be shipped to United States.
  • Brand: Ecopower
  • MPN: MP
  • Country/Region of Manufacture: China

1500W LCD mppt solar grid tie inverter DC45-90V AC 230V
Category: 1500w | Comments Off