February 19

1000W Wind Turbine on Grid Tie Inverter Limiter Home Power Sun 1000G2 WAL

1000W Wind Turbine on Grid Tie Inverter Limiter Home Power Sun 1000G2 WAL
1000W Wind Turbine on Grid Tie Inverter Limiter Home Power Sun 1000G2 WAL
1000W Wind Turbine on Grid Tie Inverter Limiter Home Power Sun 1000G2 WAL
1000W Wind Turbine on Grid Tie Inverter Limiter Home Power Sun 1000G2 WAL
1000W Wind Turbine on Grid Tie Inverter Limiter Home Power Sun 1000G2 WAL
1000W Wind Turbine on Grid Tie Inverter Limiter Home Power Sun 1000G2 WAL
1000W Wind Turbine on Grid Tie Inverter Limiter Home Power Sun 1000G2 WAL
1000W Wind Turbine on Grid Tie Inverter Limiter Home Power Sun 1000G2 WAL
1000W Wind Turbine on Grid Tie Inverter Limiter Home Power Sun 1000G2 WAL

1000W Wind Turbine on Grid Tie Inverter Limiter Home Power Sun 1000G2 WAL
You may also like. NEW 1000W Wind Power Grid Tie Inverter. With dump load controller and resistor. Max Efficiency:>92% /MPPT Efficiency:99%. DC/AC 22V-60V / 45V-90V (selected). AC 100V 110V 120V 220V 230V 240V 50hz 60hz. Low cost and easy installation. Directly connect to three phase wind turbine. Much better output waveform compare with similiar GTI. Improving the efficiency of the entire solar power system. Overload protection , Anti-island protection. Short-circuit protection/Reverse polarity protection. AC output voltage and current THD<5%, PF>99%. Build in dump load function. Build in Limiter (internal type). Introduction of Sunshine Grid Tie Inverter for Wind Turbine. The Wind Grid Tie Power Inverter is the world’s most technologically advanced inverter for use in utility-interactive applications. This manual details the safe installation and operation of the The Wind Grid Tie Inverter. This integrated system maximizes energy harvest, increases system reliability, and implifies design, installation and management. The small type wind grid tie power inverter can obtain the wind energy from wind turbine, and can tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. We call the system combining with small grid tie inverter and wind turbine as’SGWT’. The system includes wind turbine and small grid tie inverter and installation kit, and some “SGWT” also will include controller, dump load resistor. The inverter can be connected to any outlets of utility grid at house. The small grid tie inverter monitors the volume, frequency and phase of the home utility grid, then produce pure sine wave AC power that the frequency and phase are as same as the grid’s, and the volume is a bit higher than the grid’s, then according to the current controlled PWM, to control the output power to the grid. The small grid tie inverter just puts out power when the home grid is on. When the wind turbine is rotating, and the output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produces power, and the grid tie inverter will change the power from wind turbine to the home grid. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these. Power from the inverters will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid. Input Voltage Range:22-60vdc/45-90vdc (test point is at the output of the inside rectifier) , Peak power tracking voltage:25-60v/50-90v , Max output power:1000w , Nominal Voltage Range: 95-140v/185-265v , Max Efficiency:>92% , MPPT Efficiency:99%. Input AC/DC Voltage Range. AC Output Voltage Range. Dimensions (W x H x D). 322 x 196 x 88 mm. Wind Grid Tie Inverter Installation. Considering the total capacity of the grid tie power system that you need. The total capacity of the whole grid tie power system is according to your power consumption in the site that you want to install, or how much power that you want it to feed to the utility grid. Actually, the volume is just according to your willingness, because when the total power of electric appliances that are being used in the installation site is larger than the output power of the grid tie power system, these power from the system will be consumed in the site, this will slow down the power meter, otherwise, the difference of the output power from the system between the total used power of the appliances will feed to the utility grid. For example, if you want to install a grid tie power system in your house, you could decide the total power volume according to the total power the appliances that you use in your house, maybe the consumption of total energy in per day is about 5KWH, then you should realize the averaged speed of the wind in per day at your site, check the power to the speed of the wind curve from the specifications of the wind turbine, then you can estimate the average power that the wind turbine can generate, actually the real average power the wind turbine can generate at your side is not easy to estimate, you need to check the history data of the climate, because it will vary every day according to the climate, just assume a 1KW rated wind turbine is suitable for the grid tie power system that you plan to set, with this capacity of the system, it can supply all power consumption in whole year. When grid tie power system is working, sometimes, there is extra power feed to utility grid if the power from the grid tie system is larger than the power consumed by the appliances in your house, and sometimes will not when it is not larger. If you use a 1KW wind turbine, then we call the “GTWT” system is 1KW grid tie power system, of course, you can install 500W grid tie power system or 2KW grid tie inverter, even more large capacity or more small capacity grid tie inverter, it doesn’t matter. But ifthe capacity is too big, you should consider the volume of AC system of your house can hold the feeded power. Choosing applicable wind turbine for Sunshine Grid Tie Inverter. The most kinds of specifications that the factories marked about the wind turbines. 1, Starting wind speed(m/s). 2, Cut-in wind speed(m/s). 3, Rated wind speed(m/s). 6, Safe wind speed(m/s). 7, Rated DC voltage. You need to choose a wind turbine that the rated power can meet the power consumption for your using. When you choose a wind turbine, you also need to consider ahead what model gird tie inverter of SUN series you want to use. Wind turbines have two output type, one is AC output type, and another is DC output type, if the wind turbine is DC output type, it must be integrated with a rectifier. So if the wind turbine is AC output type, you should use WAL model of SUN series grid tie inverter, if the wind turbine is DC output type, then you should use WDL model of SUN series grid tie inverter. Selecting accessory for installation of the Grid Tie Power System. The accessory for grid tie power system including. 1, Connecting cables will be connected with wind turbine and inverters. 4, Power meter(Optional). 5, Bracket for wind turbine installation(not included in this user manual). Selecting correct model of Sunshine Grid Tie Inverter. When finished step1 to step3, then you can select a correct model of SUN series inverter. If the wind turbine is DC output type, then you should choose WDL model inverters, and the input DC voltage range of the inverter should fit the DC output voltage of the wind turbine, the rated power of the inverter should also fit the max. Power of the wind turbine, and the AC output of the inverter should fit the standard of AC utility grid. If the wind turbine is AC output type, then you should choose WAL model inverters. Most factories don’t supply the AC rated voltage, just supply DC rated voltage, so our WAL also supply the DC input range, please check the DC rated voltage of wind turbine should fit the DC input range of the grid tie inverter. Installing wind turbine to suitable place. Installing the wind turbine of the “SGWT” to suitable location where the wind is strong enough to drive the wind turbine. Warning: Please read the user manual of wind turbine before you install the wind turbine, don’t install the wind turbine under high wind. Warning: Ensure using strong braket to fix the wind turbine to avoid the danger under high wind. Warning: The blades of the wind turbine should be taken down before the hurricane is coming. Installing Sunshine Grid Tie Inverter to suitable place. Place the Grid Tie Inverter on a surface protected from direct sunlight, high temperatures, and water. The inverter requires at least 150mm of clearance around itself for ventilation. The inverters are for indoor use, can’t use at outdoor. You can use screws to fix the inverter to the surface, because some models of Sunshine grid tie inverter have fans on the bottom cover, so the surface should be flat. Connecting Sunshine Grid Tie Power System with cables and connectors. Connecting the Grid Tie Power System with Cables and Connectors After finished from Step1 to Step6, you should connect the wind turbine and inverter with cables and connectors to integrate the Sunshine Grid Tie System. Connect the ground terminal of the wind turbine to the NEC approved AC grounding electrode. Connect the grid tie inverters to the grounded racking using a grounding washer approved for the racking. The ground wire of the AC cables is connnected to the housing of inverter when the AC cables is connected to the inverters, so when the AC plug is inserted to the socket of AC outlet of utility grid in the house, the ground pin of the socket must be connected to the Earth ground. Connecting the wind turbine output cables after complete from Step1 to Step8. Warning: Before connect the wind turbine output cables to grid tie inverter, you should stop the the rotating of the wind turbine just in order to avoid the sparkle when connect the cables. WAL model of grid tie invereter connected with AC output type of wind turbine. Connecting two 1000G2-WAL with a max. Power is 2KW wind turbine. How to select a wind grid tie inverter? Max output power of the wind turbine. 500w-1000w wind turbines , suggest 1000w inverter. 1000w-2000w wind turbines , suggest 2000w turbine. 24v 36v 48v wind turbines , suggest 22-65v inverter. 48v 60v 72v 90V wind turbines , suggest 45-90v inverter. Some wind turbines has been built-in a regulator , the output is DC , please choose DC input type wind inverter. How to use a grid tie inverter with battery and wind turbine? If the user want to use a wind turbine to charge battery first , and output excess power to the grid , we suggest the battery function grid tie inverter(solar power GTI , battery function). The wind inverter can not work with battery well. What is the dump load controller/resistor? The dump load controller/resistor is used to protect the wind turbine and inverter. If the wind speed is too fast , the voltage will be high , it will work to reduce the wind turbines runing speed and voltage. User manual of the wind power inverter. (Only for Business Express). We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. The item “1000W Wind Turbine on Grid Tie Inverter Limiter Home Power Sun 1000G2 WAL” is in sale since Monday, December 24, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “solarregulator” and is located in Shenzhen. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • Brand: SUN
  • MPN: SUN-1000G2-WAL
  • Country/Region of Manufacture: China
  • Input Voltage: AC 22v-60v or 45v-90v Optional
  • Output Voltage: 100V 110V 120V 220V 230V 240V auto
  • Output Frequency: 45-65Hz
  • Standby Power Consumption: <0.5w
  • Total Harmonic Distortion: <5%
  • Peak Inverter Efficiency: 92%
  • MPPT Efficiency: 99%
  • Power Factor: 0.99
  • Output Wave Form: Pure Sine Wave
  • Dimensions (W x H x D): 322x196x88 mm
  • Featured Refinements: MPPT
  • Bundle Listing: No

1000W Wind Turbine on Grid Tie Inverter Limiter Home Power Sun 1000G2 WAL
Category: 1000w | Comments Off
February 10

1000W On Grid Tie Inverter with Limiter for Solar Panels/Battery Power 110/220V

1000W On Grid Tie Inverter with Limiter for Solar Panels/Battery Power 110/220V
1000W On Grid Tie Inverter with Limiter for Solar Panels/Battery Power 110/220V
1000W On Grid Tie Inverter with Limiter for Solar Panels/Battery Power 110/220V
1000W On Grid Tie Inverter with Limiter for Solar Panels/Battery Power 110/220V
1000W On Grid Tie Inverter with Limiter for Solar Panels/Battery Power 110/220V
1000W On Grid Tie Inverter with Limiter for Solar Panels/Battery Power 110/220V
1000W On Grid Tie Inverter with Limiter for Solar Panels/Battery Power 110/220V
1000W On Grid Tie Inverter with Limiter for Solar Panels/Battery Power 110/220V
1000W On Grid Tie Inverter with Limiter for Solar Panels/Battery Power 110/220V
1000W On Grid Tie Inverter with Limiter for Solar Panels/Battery Power 110/220V
1000W On Grid Tie Inverter with Limiter for Solar Panels/Battery Power 110/220V
1000W On Grid Tie Inverter with Limiter for Solar Panels/Battery Power 110/220V

1000W On Grid Tie Inverter with Limiter for Solar Panels/Battery Power 110/220V
You may also like. 1000W On Grid Tie Inverter with Limiter for Solar Panels/Battery Power 110/220V. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Gereantion 1000w Standard Solar Power Grid Tie Inverter. DC 22V-65V or 45V-90V (Optional). -AC 110V 120V 220V 230V 240V (auto selected). With Battery Discharge Function / Voltage Adjustable. – Wi-Fi port (optional). -Power Limiter function built-in. SGPV and Grid Tie Inverter. SGPV – small solar grid tie inverter and solar panels. The inverter can obtain the solar energy from solar panel, and tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. When the sun shines, the solar panels will produces DC voltage, and the grid tie inverter will change the DC voltage to AC voltage and puts out power to the home grid. The electric apparatus in the house will use power from the inverter first. The power meter will SLOW down. Advantage of the 2G grid tie inverter? The 2nd Generation grid tie inverter, new technical , Higher efficiency. Higher MPPT efficiency , Max 99%. Multiple intelligent protection to ensure safe use. Wide DC input voltage , suitable for all types solar panels. Easy to install and easy to operate. Power Limiter function , Battery discharge function support. Pure sine wave form output , THD < 5%. Input DC Voltage Range. Peak power tracking voltage. AC Output Voltage Range. Dimensions (W x H x D). How to choose the inverter. The 22-65V model inverter will start up at 25V, after starting, the inverter can work in 22V-65V. Vmp 30v-60v Solar panels connected in Parallel suggested, for example : 4 pcs 200-260w (Vmp 31v solar panels in parallel). The 45-90V model inverter will start up at 49.5V, after starting, the inverter can work in 45V-90V. Vmp 50v-90v Solar panels in parallel suggested ; for Vmp 25V-45v solar panels , we suggest 2 panels in series , the total voltage will be 50V-90V , then connect 2 or more groups in parallel. For example : 2 pcs 200-260w (Vmp 31v) connected in series , 2 groups in parallel. About the limiter function. The Limiter function has been built-in. But, there is not limiter sensor/clamp with this product. The function is turned off. If customer want to use limiter function , please order limiter sensor/clamp in the future , or order a limiter model inverter. How to use the grid tie inverter? 1 unit inverter installation / more units inverters in parallel. The inverter AC output can be connected in the AC plug of grid in the house. LCD display and operation. Bat or solar limited current mode. This function is usable while using with battery. The setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level. MPPT function of the inverter will auto invalid when working under this setting. Set is 0.1V/step. Set is 0.1V/Step. Note : Limiter model must use limiter sensor/clamp , there is not limiter sensor and clamp with this model inverter. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then powe will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Optional Function : Wi-Fi port. (Only for Business Express). We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. The item "1000W On Grid Tie Inverter with Limiter for Solar Panels/Battery Power 110/220V" is in sale since Friday, November 30, 2018. This item is in the category "Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters". The seller is "solarregulator" and is located in Shenzhen. This item can be shipped to United States.
  • Brand: SUN
  • MPN: SUN-1000G2-LCD
  • Country/Region of Manufacture: China
  • Input Voltage: 22v-60v or 45v-90v Optional
  • Output Voltage: 100V 110V 120V 220V 230V 240V auto
  • Output Frequency: 45-65Hz
  • Standby Power Consumption: <0.5w
  • Total Harmonic Distortion: <5%
  • Peak Inverter Efficiency: 92%
  • MPPT Efficiency: 99%
  • Power Factor: 0.99
  • Output Wave Form: Pure Sine Wave
  • Weight: 3.6kg
  • Dimensions (W x H x D): 322x196x88 mm
  • Featured Refinements: MPPT
  • Bundle Listing: No

1000W On Grid Tie Inverter with Limiter for Solar Panels/Battery Power 110/220V
Category: 1000w | Comments Off
February 6

1000W On Grid Tie Inverter with Limiter for Solar Wi-Fi Function 110/220V

1000W On Grid Tie Inverter with Limiter for Solar Wi-Fi Function 110/220V
1000W On Grid Tie Inverter with Limiter for Solar Wi-Fi Function 110/220V
1000W On Grid Tie Inverter with Limiter for Solar Wi-Fi Function 110/220V
1000W On Grid Tie Inverter with Limiter for Solar Wi-Fi Function 110/220V
1000W On Grid Tie Inverter with Limiter for Solar Wi-Fi Function 110/220V
1000W On Grid Tie Inverter with Limiter for Solar Wi-Fi Function 110/220V
1000W On Grid Tie Inverter with Limiter for Solar Wi-Fi Function 110/220V
1000W On Grid Tie Inverter with Limiter for Solar Wi-Fi Function 110/220V
1000W On Grid Tie Inverter with Limiter for Solar Wi-Fi Function 110/220V
1000W On Grid Tie Inverter with Limiter for Solar Wi-Fi Function 110/220V
1000W On Grid Tie Inverter with Limiter for Solar Wi-Fi Function 110/220V
1000W On Grid Tie Inverter with Limiter for Solar Wi-Fi Function 110/220V

1000W On Grid Tie Inverter with Limiter for Solar Wi-Fi Function 110/220V
You may also like. 1000W On Grid Tie Inverter with Limiter for Solar Wi-Fi Function 110/220V. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. New upgraded firmware enable battery or solar limiter current and power model. User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter. User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged. Gereantion 1000w Standard Solar Power Grid Tie Inverter. DC 22V-65V or 45V-90V (Optional). AC 110V 120V 220V 230V 240V (auto selected). With Battery Discharge Function / Voltage Adjustable. Wi-Fi port (optional). Power Limiter function built-in. SGPV and Grid Tie Inverter. SGPV – small solar grid tie inverter and solar panels. The inverter can obtain the solar energy from solar panel, and tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable. When the sun shines, the solar panels will produces DC voltage, and the grid tie inverter will change the DC voltage to AC voltage and puts out power to the home grid. The electric apparatus in the house will use power from the inverter first. The power meter will SLOW down. Advantage of the 2G grid tie inverter? The 2nd Generation grid tie inverter, new technical , Higher efficiency. Higher MPPT efficiency , Max 99%. Multiple intelligent protection to ensure safe use. Wide DC input voltage , suitable for all types solar panels. Easy to install and easy to operate. Power Limiter function , Battery discharge function support. Pure sine wave form output , THD < 5%. Input DC Voltage Range. Peak power tracking voltage. AC Output Voltage Range. Dimensions (W x H x D). How to choose the inverter. The 22-65V model inverter will start up at 25V, after starting, the inverter can work in 22V-65V. Vmp 30v-60v Solar panels connected in Parallel suggested, for example : 4 pcs 200-260w (Vmp 31v solar panels in parallel). The 45-90V model inverter will start up at 49.5V, after starting, the inverter can work in 45V-90V. Vmp 50v-90v Solar panels in parallel suggested ; for Vmp 25V-45v solar panels , we suggest 2 panels in series , the total voltage will be 50V-90V , then connect 2 or more groups in parallel. For example : 2 pcs 200-260w (Vmp 31v) connected in series , 2 groups in parallel. About the limiter function. The Limiter function has been built-in. But, there is not limiter sensor/clamp with this product. The function is turned off. If customer want to use limiter function , please order limiter sensor/clamp in the future , or order a limiter model inverter. How to use the grid tie inverter? 1 unit inverter installation / more units inverters in parallel. The inverter AC output can be connected in the AC plug of grid in the house. LCD display and operation. Bat or solar limited current mode. This function is usable while using with battery. The setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level. MPPT function of the inverter will auto invalid when working under this setting. Set is 0.1V/step. Set is 0.1V/Step. Note : Limiter model must use limiter sensor/clamp , there is not limiter sensor and clamp with this model inverter. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then powe will be supplemented by the Grid. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid. Optional Function : Wi-Fi port. We will message you if it happens. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. The item "1000W On Grid Tie Inverter with Limiter for Solar Wi-Fi Function 110/220V" is in sale since Friday, November 30, 2018. This item is in the category "Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters". The seller is "yoosmart2009" and is located in Los Angeles. This item can be shipped to United States.
  • Brand: SUN
  • MPN: SUN-1000G2-LCD
  • Country/Region of Manufacture: China
  • Input Voltage: 22v-60v or 45v-90v Optional
  • Output Voltage: 100V 110V 120V 220V 230V 240V auto
  • Output Frequency: 45-65Hz
  • Standby Power Consumption: <0.5w
  • Total Harmonic Distortion: <5%
  • Peak Inverter Efficiency: 92%
  • MPPT Efficiency: 99%
  • Power Factor: 0.99
  • Output Wave Form: Pure Sine Wave
  • Weight: 3.6kg
  • Dimensions (W x H x D): 322x196x88 mm
  • Featured Refinements: MPPT
  • Bundle Listing: No

1000W On Grid Tie Inverter with Limiter for Solar Wi-Fi Function 110/220V
Category: 1000w | Comments Off
February 2

1000W Solar On Grid Tie Inverter For 10.8V45V DC Panel To 110V / 220V AC MPPT

1000W Solar On Grid Tie Inverter For 10.8V45V DC Panel To 110V / 220V AC MPPT
1000W Solar On Grid Tie Inverter For 10.8V45V DC Panel To 110V / 220V AC MPPT
1000W Solar On Grid Tie Inverter For 10.8V45V DC Panel To 110V / 220V AC MPPT
1000W Solar On Grid Tie Inverter For 10.8V45V DC Panel To 110V / 220V AC MPPT
1000W Solar On Grid Tie Inverter For 10.8V45V DC Panel To 110V / 220V AC MPPT
1000W Solar On Grid Tie Inverter For 10.8V45V DC Panel To 110V / 220V AC MPPT

1000W Solar On Grid Tie Inverter For 10.8V45V DC Panel To 110V / 220V AC MPPT
You may also like. 1000W Solar On Grid Tie Inverter For 10.8V45V DC Panel To 110V / 220V AC MPPT. Unique circuit design, choice of import industrial electronic components, higher efficiency, more stable performance. Efficiency more than 99%, faster and more sensitive reaction, more reliable. Parallel type design for DC input and modularization design for inverter, small volume, distributed installation easy for system configuration, flexible for combination, strong expansibility of system. Adopting high-frequency isolation transformer type, high efficiency, and high security. Perfect electrical protection function. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion. Getting electronic circuit design, apperance design and other core technology Patents. Smart Grid Tie inverter is a co:pact unit, which directly converts direct current into alternating current for powering appliances and/or office equipments and connecting to utility grid. Smart Micro inverter specially optimized design to work with modularization of DC power supplies which includes the mainstream solar modules. 18V(36cells), 24V(60 cells) and 36V (72cells). Moncrystal and/or polycrystalline solar panels and batteries. Distributed modularization design philosophy for smart micro inverter insures the productiveness of the whole system and will not affect by a single point of failure. Each Smart Micro inverter is individually connected to each PV module in the array. This unique configuation means that an individual Maximum Peak Power Point Tracker(MPPT) controls each PV modules in the array which may be affected by shading, soiling, orientation or mismatch, etc. Smart Micro inverter insures top performance for maximizing energy production from the whole PV system and gets return on investment in less time. We will message you if it happens. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. The item “1000W Solar On Grid Tie Inverter For 10.8V45V DC Panel To 110V / 220V AC MPPT” is in sale since Tuesday, September 4, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “homegarden0722″ and is located in Shenzhen. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • Brand: PowMr
  • Model: 1000W 18V/36V Solar Inverter
  • Country/Region of Manufacture: China
  • Certification: CE ROHS
  • Type: Pure sine wave inverter
  • Function: With MPPT
  • Solar Panel: 18V30V/36V 36/60/72cells panel
  • Frequency: 50Hz/60Hz(Auto control)
  • Input: DC 10.8-28V/ 20-45V
  • MPN: 5483224

1000W Solar On Grid Tie Inverter For 10.8V45V DC Panel To 110V / 220V AC MPPT
Category: 1000w | Comments Off
January 31

1000W Grid Tie Inverter Pure Sine Wave Inverter 110V or 220V Output Golden

1000W Grid Tie Inverter Pure Sine Wave Inverter 110V or 220V Output Golden
1000W Grid Tie Inverter Pure Sine Wave Inverter 110V or 220V Output Golden

1000W Grid Tie Inverter Pure Sine Wave Inverter 110V or 220V Output Golden
1000W Grid tie inverter, Pure sine wave inverter, Golden Color. Creative MPPT technology, efficiency more than 99%. Parallel type design for DC input and modularization design. Small volume, distributed installation, easy for system configuration. Adopting high-frequency isolation transformer type, high efficiency. Perfect electrical protection function. Stackable and Easy to install. Please be noted, This grid tie inverter cannot be used as off grid/stand alone solar system. The output need to be connected to the grid power. Can not supply power directly to the AC loads. Grid tie inverter is a device which directly converts direct current into alternating current which. Sine wave, frequency and phase are same as power grid and then feed into utility grid. It is a key. Device of power generation systems such as PV power generation system. Smart Microinverter specially optimized design to work with modularization of DC power supplies which includes the mainstream solar modules, 18V (36 cells), 24V (60 cells) and 36V (72 cells) monocrystal and/or Polycrystalline solar panels. Smart Microinverters are stabilization, reliable and high conversion efficiency items. It is best choice for PV. Smart Microinverter can be easily placed and attached to the rack underneath of PV module. Need spaces for independent installation and low voltage DC wire connects from the PV module to. Smart Microinverter can eliminate the risk of high DC voltage. Philosophy for Smart Microinverterl insures the productiveness of the whole system and will not. Affect by a single point of failure. Each Smart Microinverter is individually connected to one PV. Module in the array. Each PV module has the individual Maximum Peak Power Point Tracker. (MPPT) control and insures the maximum power is exported to the utility grid regardless of the. Performance of the other PV modules in the array. When PV modules in the array under non-ideal. Conditions in practical applications such as PV modules are affected by shading, soiling. Orientation, or mismatch, Smart Microinverter insures top performance for maximizes energy. Production from the whole PV system and gets return on investment in less time. Advantages of Smart Microinverter. Unique circuit design, choice of import industrial electronic components, higher efficiency, more. Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more. Parallel type design for DC input and modularization design for inverter, small volume, distributed. Installation, easy for system configuration, flexible for combination, strong expansibility of system. Adopting high-frequency isolation transformer type, high efficiency, and high security. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion. Getting electronic circuit design, appearance design and other core technology patents. 120V(90-140V) or 230V(190-260V). What’s In Box. · 1 x 1000W Grid Tie Inverter. · 1 x User’s Manaul. · 1 x AC Cord (US/EU/UK/AU). Russian buyers were required to fill in the full name; Brazilian buyers are required to leave CPF/CPNJ Number; Chilean buyers are required to leave RUT number. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! The item “1000W Grid Tie Inverter Pure Sine Wave Inverter 110V or 220V Output Golden” is in sale since Thursday, October 19, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “zcsolar2016″ and is located in Shanghai. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • Model: SY1000G
  • Country/Region of Manufacture: China
  • MPN: Does Not Apply
  • Brand: Unbranded
  • Type: Grid Tie Inverter

1000W Grid Tie Inverter Pure Sine Wave Inverter 110V or 220V Output Golden
Category: 1000w | Comments Off
January 31

1000W MPPT Micro Solar Inverter Grid Tie Inverter DC20V45V to AC230V QK799

1000W MPPT Micro Solar Inverter Grid Tie Inverter DC20V45V to AC230V QK799
1000W MPPT Micro Solar Inverter Grid Tie Inverter DC20V45V to AC230V QK799
1000W MPPT Micro Solar Inverter Grid Tie Inverter DC20V45V to AC230V QK799
1000W MPPT Micro Solar Inverter Grid Tie Inverter DC20V45V to AC230V QK799
1000W MPPT Micro Solar Inverter Grid Tie Inverter DC20V45V to AC230V QK799
1000W MPPT Micro Solar Inverter Grid Tie Inverter DC20V45V to AC230V QK799
1000W MPPT Micro Solar Inverter Grid Tie Inverter DC20V45V to AC230V QK799
1000W MPPT Micro Solar Inverter Grid Tie Inverter DC20V45V to AC230V QK799
1000W MPPT Micro Solar Inverter Grid Tie Inverter DC20V45V to AC230V QK799
1000W MPPT Micro Solar Inverter Grid Tie Inverter DC20V45V to AC230V QK799
1000W MPPT Micro Solar Inverter Grid Tie Inverter DC20V45V to AC230V QK799

1000W MPPT Micro Solar Inverter Grid Tie Inverter DC20V45V to AC230V QK799
100% Brand new and high quality! Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more reliable. Parallel type design for DC input and modularization design for inverter, small volume, distributed installation, easy for system configuration, flexible for combination, strong expansibility of system. Adopting high-frequency isolation transformer type, high efficiency, and high security. Perfect electrical protection function. Not rust, heat-resisting and cold-resistant as well as anti-corrosion. 1 1000W Grid Tie Inverter. Due to the difference between different monitors, the pictures may not reflect the actual color of the item. Compare the detail sizes with yours, please allow slight difference due to manual measurement. Thanks for your understandings. Please make sure it is correct. We believe our items are so outstanding. All products are quality checked. Otherwise deal is final. We will be happy to resolve any issues you may have in a cordial and friendly manner. We appreciate your Postive Feedback, and will do the same in return. The item “1000W MPPT Micro Solar Inverter Grid Tie Inverter DC20V45V to AC230V QK799″ is in sale since Monday, November 6, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “anyfashion2013″ and is located in Shenzhen. This item can be shipped worldwide.
  • Brand: Unbranded
  • Model: 1000W
  • MPN: Does Not Apply
  • UPC: Does not apply
  • EAN: Does not apply
  • Marca: Does Not Apply
  • Type:: EU Plug
  • Charger Plug: EU Plug
  • Marque: – Sans marque/Générique -
  • Numéro de pièce fabricant: Non applicable
  • Marke: Does not apply
  • Herstellernummer: Does not apply
  • Manufacturer: Does not apply

1000W MPPT Micro Solar Inverter Grid Tie Inverter DC20V45V to AC230V QK799
Category: 1000w | Comments Off
January 29

1000W Grid Tie Inverter AC230V Use For 24V/30V/36V Solar Panel Pure Sine Wave UK

1000W Grid Tie Inverter AC230V Use For 24V/30V/36V Solar Panel Pure Sine Wave UK
1000W Grid Tie Inverter AC230V Use For 24V/30V/36V Solar Panel Pure Sine Wave UK
1000W Grid Tie Inverter AC230V Use For 24V/30V/36V Solar Panel Pure Sine Wave UK
1000W Grid Tie Inverter AC230V Use For 24V/30V/36V Solar Panel Pure Sine Wave UK
1000W Grid Tie Inverter AC230V Use For 24V/30V/36V Solar Panel Pure Sine Wave UK
1000W Grid Tie Inverter AC230V Use For 24V/30V/36V Solar Panel Pure Sine Wave UK
1000W Grid Tie Inverter AC230V Use For 24V/30V/36V Solar Panel Pure Sine Wave UK
1000W Grid Tie Inverter AC230V Use For 24V/30V/36V Solar Panel Pure Sine Wave UK
1000W Grid Tie Inverter AC230V Use For 24V/30V/36V Solar Panel Pure Sine Wave UK
1000W Grid Tie Inverter AC230V Use For 24V/30V/36V Solar Panel Pure Sine Wave UK
1000W Grid Tie Inverter AC230V Use For 24V/30V/36V Solar Panel Pure Sine Wave UK
1000W Grid Tie Inverter AC230V Use For 24V/30V/36V Solar Panel Pure Sine Wave UK

1000W Grid Tie Inverter AC230V Use For 24V/30V/36V Solar Panel Pure Sine Wave UK
100% Brand new and high quality! Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more reliable. Parallel type design for DC input and modularization design for inverter, small volume, distributed installation, easy for system configuration, flexible for combination, strong expansibility of system. Adopting high-frequency isolation transformer type, high efficiency, and high security. Perfect electrical protection function. Not rust, heat-resisting and cold-resistant as well as anti-corrosion. 1 1000W Grid Tie Inverter. Due to the difference between different monitors, the pictures may not reflect the actual color of the item. Compare the detail sizes with yours, please allow slight difference due to manual measurement. Thanks for your understandings. Order will be handled. Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods. The item “1000W Grid Tie Inverter AC230V Use For 24V/30V/36V Solar Panel Pure Sine Wave UK” is in sale since Wednesday, August 1, 2018. This item is in the category “Home, Furniture & DIY\DIY Materials\Alternative & Solar Energy\Solar Panels”. The seller is “autocarsd” and is located in Birmingham. This item can be shipped worldwide.
  • Brand: Unbranded
  • MPN: Does Not Apply
  • UPC: Does not apply
  • EAN: Does not apply
  • Model: 1000W
  • Marque: – Sans marque/Générique -
  • Numéro de pièce fabricant: Does Not Apply
  • Marca: Does Not Apply
  • Type:: EU Plug
  • Charger Plug: EU Plug
  • Marke: Markenlos
  • Herstellernummer: Does Not Apply
  • Manufacturer: Does not apply

1000W Grid Tie Inverter AC230V Use For 24V/30V/36V Solar Panel Pure Sine Wave UK
Category: 1000w | Comments Off
January 24

1000W Grid Tie Inverter 220V MPPT Pure Sine Wave Inverter 50Hz/60Hz Auto10.8-30V

1000W Grid Tie Inverter 220V MPPT Pure Sine Wave Inverter 50Hz/60Hz Auto10.8-30V
1000W Grid Tie Inverter 220V MPPT Pure Sine Wave Inverter 50Hz/60Hz Auto10.8-30V
1000W Grid Tie Inverter 220V MPPT Pure Sine Wave Inverter 50Hz/60Hz Auto10.8-30V
1000W Grid Tie Inverter 220V MPPT Pure Sine Wave Inverter 50Hz/60Hz Auto10.8-30V
1000W Grid Tie Inverter 220V MPPT Pure Sine Wave Inverter 50Hz/60Hz Auto10.8-30V

1000W Grid Tie Inverter 220V MPPT Pure Sine Wave Inverter 50Hz/60Hz Auto10.8-30V
1000W Micro Grid Tie Inverter for Solar Home System MPPT Function PURE SINE WAVE. Brand: iMeshbean 100% High Quality. We have proudly designed our own products and successfully created our own brands in the industries. In order to provide the peaceful shopping experience, our dedicated customer service teams can response to all the requests within 24 hours. We honor 30 days return on any products customers are not satisfied. Being our customer is a wise choice! 1000W Grid tie inverter , Pure Sine Wave Inverter. DC10.8V-30V to AC 230V Output. Fit for 36 cells/18V Solar Panel. Please be noted , This grid tie inverter cannot be used as off grid/stand alone solar system. The output need to be connected to the grid power. Can not supply power directly to the AC loads. Introduction: Grid tie inverter is a device which directly converts direct current into alternating current which sine wave, frequency and phase are same as power grid and then feed into utility grid. It is a key device of power generation systems such as PV power generation system, wind turbine power generation system. Smart Microinverter specially optimized design to work with modularization of DC power supplies which includes the mainstream solar modules, 24V (60 cells) and 36V (72 cells) monocrystal and/or Polycrystalline solar panels, wind turbines and batteries. Smart Microinverters are stabilization, reliable and high conversion efficiency items. It is best choice for PV power generation systems. Smart Microinverter can be easily placed and attached to the rack underneath of PV module. No need spaces for independent installation and low voltage DC wire connects from the PV module to Smart Microinverter can eliminate the risk of high DC voltage. Distributed modularization design philosophy for Smart Microinverterl insures the productiveness of the whole system and will not affect by a single point of failure. Each Smart Microinverter is individually connected to one PV module in the array. Each PV module has the individual Maximum Peak Power Point Tracker (MPPT) control and insures the maximum power is exported to the utility grid regardless of the performance of the other PV modules in the array. When PV modules in the array under non-ideal conditions in practical applications such as PV modules are affected by shading, soiling, orientation, or mismatch, Smart Microinverter insures top performance for maximizes energy production from the whole PV system and gets return on investment in less time. Advantages of Smart Microinverter 1. Unique circuit design, choice of import industrial electronic components, higher efficiency, more stable performance. Creative MPPT technology, efficiency more than 99%, faster and more sensitive reaction, more reliable. Parallel type design for DC input and modularization design for inverter, small volume, distributed installation, easy for system configuration, flexible for combination, strong expansibility of system. Adopting high-frequency isolation transformer type, high efficiency, and high security. Perfect electrical protection function. Aluminum alloy housing, not rust, heat-resisting and cold-resistant as well as anti-corrosion. Getting electronic circuit design, appearance design and other core technology patents. DC voltage range 10.8-30V. Power Factor >97.5%. AC standard voltage range 230V(180-260V). AC frequency range 48Hz-62Hz(Auto control). What’s In Box. 1 x Solar Inverter. 1 x User’s Manaul. 1 x AC Cord. We are not responsible for undeliverable address. Pleas message us if recipient address changes needed before we fulfill the order. Sorry, no local pickups available. No need return the original one for low-valued items. All return products should be in original package with all accessories included. We stand behind our products so you are always covered! The item “1000W Grid Tie Inverter 220V MPPT Pure Sine Wave Inverter 50Hz/60Hz Auto10.8-30V” is in sale since Wednesday, August 2, 2017. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Chargers & Inverters”. The seller is “chargerangel” and is located in Pasadena, Texas. This item can be shipped to United States, Canada.
  • Solar panel:: 18V(36cells),24/30V(60cells),36V(72cells)
  • Type: Grid Tie Inverters
  • Energy Type: Solar
  • Model: Pure sine wave inverter
  • MPN: Does Not Apply
  • Brand: iMeshbean
  • Power: 1000W
  • Frequency range: 50Hz/60Hz(Auto control)

1000W Grid Tie Inverter 220V MPPT Pure Sine Wave Inverter 50Hz/60Hz Auto10.8-30V
Category: 1000w | Comments Off
January 16

1000W Grid Tie power inverter DC22V-56V / AC110V, solar panel, mppt, USA stock

1000W Grid Tie power inverter DC22V-56V / AC110V, solar panel, mppt, USA stock
1000W Grid Tie power inverter DC22V-56V / AC110V, solar panel, mppt, USA stock
1000W Grid Tie power inverter DC22V-56V / AC110V, solar panel, mppt, USA stock
1000W Grid Tie power inverter DC22V-56V / AC110V, solar panel, mppt, USA stock
1000W Grid Tie power inverter DC22V-56V / AC110V, solar panel, mppt, USA stock
1000W Grid Tie power inverter DC22V-56V / AC110V, solar panel, mppt, USA stock
1000W Grid Tie power inverter DC22V-56V / AC110V, solar panel, mppt, USA stock
1000W Grid Tie power inverter DC22V-56V / AC110V, solar panel, mppt, USA stock
1000W Grid Tie power inverter DC22V-56V / AC110V, solar panel, mppt, USA stock
1000W Grid Tie power inverter DC22V-56V / AC110V, solar panel, mppt, USA stock

1000W Grid Tie power inverter DC22V-56V / AC110V, solar panel, mppt, USA stock
1000W on Grid Tie Power Inverter. Pure sine wave micro grid tie inverter. For 24v solar system, DC 22V-56V to AC 90V-130V. The grid tie power inverter can obtain the solar energy from solar panels, and can tie to the grid through its output cable without extra equipment. The installation is very convenient and reliable. This smart grid tie inverter can connect with mono silicon, polygon silicon, non-crystal film that can transform solar energy to home grid. The power of grid tie solar panels, it can be standardization according to the actual using. The inverter can be connected to any home AC outlet, when this line runs by the conventional electric network. This grid tie inverter monitors the volume, frequency and phase of the home grid, then produce a pure sine wave that the frequency and phase are as same as the grids, and the volume is a bit higher than the grids, then according to the current controlled PWM, to control the output power to the grid. The inverter just outputs power when the home grid is on. In the day time, solar panels will produces DC voltage, and thus inverter will change the DC voltage to AC voltage and outputs power to home grid system. During the night, inverter will be standby mode and led light will be red, and inverter will back to work in the day time when inverter detects the input voltage is up to working voltage. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these power from the inverters will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid. There are many advantages of grid tie inverter compare with the traditional grid tie system. Low cost and easy installation this inverter can make full use of all types of buildings/houses surface that face to the sun in the city as well as fast and easy installation of solar models and grid tie inverter. Its very low maintenance costs. Free combination this inverter can be used as a separate grid tie system and can be setup as a large solar array with many of them (stackable). The quantity of the inverter in the array is just according to your demands. If you are planning to install a grid tie PV system, in a general way, the solar array and inverter need to be carefully matched to ensure that the inverters on load voltage and power limits are not exceeded. When you want to increase more solar panels, and if the total power of the solar panels exceeds the allocation grid tie inverter, it is necessary to add more grid tie inverters. Combination of grid tie inverters will not interact The traditional solar grid tie system, they offer units ranging in high power output and these units are modular so you can have multiple units operating in parallel for large solar arrays. Although, the traditional grid inverter has MPPT feature (Maximum Power Point tracking), but the maximum power point is according to the entire series in terms of solar panels array, if the performance of a piece of solar panels in the system, for some reason, like dust, shadow… The performance of the entire solar power system will decrease. This inverter has no such disadvantage. If the performance of a piece of solar panels in the system degrades, this just effects this piece itself, will not affect others in the system. Improving the efficiency of the entire solar power system in traditional grid tie system, the solar panels are connected in series, so the MPPT of the inverter is according to the total panels in series, not to every panel, but there is difference between every panel, so not every panel is working at the maximum power, this will reduce the total power of these panel in series. But this inverter has no such disadvantage. Because every inverter has MPPT function, so every panel is working at the maximum power, this will increase the efficiency of the entire system. Low power consumption most of the parts in the grid tie inverter are digital ICs and low power MCU, so the power consumption of it is low, though the quantity of grid tie inverters is increased, but this will not increase the power consumption of the entire system. The individual system of the inverter is shown in Figure 1. Installing the solar panel with DC input terminals of the grid tie inverter, and inverter AC side is power cord with plug, just plug into home AC grid socket. Connect solar panels with inverters DC terminals, inverter AC side connect to home AC grid source, then turn on inverter to start work. Please connect with correct home Ac source, if inverter is AC 180v-260v, then must connect with home AC 280v-260v outlets, inverter will not work for wrong voltage. The LED indicator will start to light when the grid and DC supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being input from the solar panels. The more input power, the led light will flash fast. If there is no Ac grid detected, the red LED will be on, the inverter will not output, this is called Island protection to avoid damage of PCB boards. Note: this inverter is designed for solar panel, please do not use with wind turbine, thanks. Normal Ac output power. Maximum AC output power. DC Input Voltage range. DC 22V-56V (solar panel). AC Output Voltage range. Total harmonic distortion(THD). MPPT function / Stackable. Dimensions (L x W x H /cm). 33.519.513.5cm. The item “1000W Grid Tie power inverter DC22V-56V / AC110V, solar panel, mppt, USA stock” is in sale since Friday, November 16, 2018. This item is in the category “Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Solar Panels”. The seller is “solarleader.j” and is located in Dallas, Texas. This item can be shipped to United States.
  • Model: 1000w-GT-22-110
  • Country/Region of Manufacture: China
  • MPN: Does Not Apply
  • Wattage: 1000W
  • Brand: solinba
  • Type: Solar Panel

1000W Grid Tie power inverter DC22V-56V / AC110V, solar panel, mppt, USA stock
Category: 1000w | Comments Off