You may also like. 1000W Solar Grid Tie Inverter MPPT DC20-45V to AC110V for 24V/30V/36V PV Panel. 600W Grid Tie Inverter DC22-60V for 30V/36V Solar Panel Pure Sine Wave Inverter. 1000W Grid Tie Inverter MPPT DC10.8-30V to AC110V Solar Pure Sine Wave Inverter. 600W Solar Grid Tie Inverter AC110V for 30V/36V PV Panel Pure Sine Wave Inverter. 1000W Grid Tie Inverter DC10.8-30V to AC110V for 12V Solar Panel Microinverter. 600W MPPT Grid Tie Inverter DC11-32V to AC110V for 12V Solar Panel/24V Battery. 2000W Grid Tie Inverter with Limiter Sensor MPPT Stackable DC45-90V to AC190-260. MPPT 600W Grid Tie Inverter AC110V for 30V/36V PV Panel Pure Sine Wave Inverter. 600W Solar Grid Tie Inverter MPPT DC22-60V to AC110V Pure Sine Wave Inverter CE. 1000W Solar Grid Tie Inverter with Power Limiter Sensor DC26-60V to AC190-260V. Grid Tie Inverter DC Input 22-60V(Starting Voltage 26V). Grid Tie Inverter with Limiter Sensor. Delivers only the power needed by the load. Voc (solar panel) must not exceed 60V to ensure good output efficiency. Battery discharge power mode, Can auto regulate depth of discharge of the battery bank. Micro Inverter Max Power Point Tracking and AC Stackable, Anti-island protection. 1000W Grid Tie Inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load. Smart Micro inverter is synchronized and in-phase with the utility grid. The electric apparatus in the house will use power from the inverter first. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid. Why we produced the GRID TIE INVERTER WITH LIMITER? It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated — because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem. This is the 2nd generation grid tie inverter with limiter. But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter. For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting. The 22-60V model inverter will start up at 26V, after starting, the inverter can work in 22V-60V. Solar Panel Voc cannot be higher than 60V. Vmp 30v-48v Solar panels connected in Parallel suggested, for example : 4 pcs 200-260w (Vmp 31v solar panels in parallel). Rated Power (Peak/Continuous): 1000W / 900W DC Input Voltage: 22V60V Peak Power Tracking Voltage: 2654V AC Output Voltage Range:110V/220V Auto Grid Tie Power Inverter starting voltage 26V AC Output Frequency Range: 46Hz65Hz Stackable: Just for AC Output Output Wareform: Pure sine wave. 1 x On Grid Inverter with Limiter(built-in) 1 x AC cable 1 x Internal type Limiter clamp with sensor & 2m cable 1 x English User Manual. Stackable connectionThe purpose is let small power inverter become high-power inverter. Installation of GTIL With Internal Limiter. How to use the Power Limit function? Connects/clamps to one hot wire after the Main Circuit Breaker. Converts the magnetic field created by the flow of current in the wire into small AC voltage and current which is proportional to the power that passes through the wire. This installation is not require an additional limiter module, Installation is much easier. Clamp the current sensor cable to one of the hot wire to measure the current, the internal limiter will auto detect the load power and control the inverter output power, excess power will be well controlled. Limiter Setting on the LCD of the inverter. The GTIL include three working mode:Work as normal GTI without power limitation. Work under Internal limiter mode and Work under External limiter mode, Pls make your setting on the LCD and save it, details setting operation, pls read the GTI manual. Bat or solar limited current mode. This function is usable while using with battery. The setted voltage will be the cut off voltage, this means while battery discharged to the setted voltage point or below setted point, inverter will auto disconnect from the battery and stop operating. This can prevent the battery from over discharged. The setted current means inverter will discharge the battery at this current level. MPPT function of the inverter will auto invalid when working under this setting. Set is 0.1V/step. Set is 0.1V/Step. Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods. (Only for Business Express). Feedback is very important to us. Please do not give us any bad feedback. If you can do as we say, we will be very grateful. Please give us the opportunity to resolve any problem. The item “1000W Solar Grid Tie Inverter with Power Limiter DC26-60V to AC110V/220V Auto” is in sale since Monday, July 20, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “maihuiyan” and is located in CA. This item can be shipped to United States.

• Model: Grid Tie Inverter with Power Limiter Sensor
• Stackable: Just for AC Output
• Color: Blue
• MPN: Does Not Apply
• Recommended Environment: Indoor
• Brand: Y&H
• Application: Home/Garden
• Inverter Technology: Microinverter
• Country/Region of Manufacture: China
• System Configuration: Grid-Tie
• Power Source: Solar
• Features: Bluetooth Module
• Power: 1000W
• AC Output Frequency Range: 46Hz~65Hz
• AC Output Voltage Range: 190~260V
• DC Input Voltage: DC22V~60V
• Grid Tie Power Inverter starting voltage: 26V
• Output Wareform: Pure sine wave
• Peak Power Tracking Voltage: 26~54V