Puerto Rico, Schneider XW6848 Inverter/Charger Package
Rd 165 KM 2.4 USFTZ. (1) System Control Panel. Schneider Electric XW Plus Inverter/Chargers. With higher power ratings, and improved battery management, the NEW Conext XW+ is an adaptable single-phase and three-phase hybrid inverter with grid-tie functionality and dual AC power inputs. Available solar charge controllers, monitoring, and automated generator control modules enable further adaptability. From a single Conext XW+ unit to clusters up to 102 kW, the Conext XW+ is a scalable system that allows for the integration of solar capacity as required. Adaptable and scalable, the Schneider Electric Conext XW+ system is the one solution for grid-interactive and off-grid, residential and commercial, solar and backup power applications. Single or three phase systems from 7.0 kW to 102 kW. Excellent load starting with high 30-minute and 5-second power. Improved battery management including support for Lithium-Ion technology. Superior balance of system integration with battery bank, charge controller, and generators, further simplifies installation. Supports DC coupled and AC coupled off-grid and grid-tie architectures. Intelligent functionality enables solar prioritization, load shifting, peak shaving, and assists small generators with heavy loads. Backup power with grid-tie functionality converts external DC power to AC power for export to the utility grid. Monitor, troubleshoot or upgrade firmware with Conext ComBox. System configures quickly into compact wall-mounted system. Integrates both grid and generator power with dual AC inputs. UL 1741-SA listing for PRO unit only. Peak efficiency 95.7%. Output power (continuous) at 25 °C. Overload 30 min / 60 sec at 25 °C. 7000 W / 9500 W. 8500 W / 12000 W. Output power (continuous) at 40 °C. 50 / 60 Hz. Input DC voltage range. 42 to 60 V (48 V Nominal). Maximum input DC current. Maximum output charge current. 40 – 64 V (48 V Nominal). Three stage, two stage, boost, custom. Battery temperature sensor included. Flooded (default), Gel, AGM, LiON. Battery bank range (scaled to PV array size). 440 – 10000 Ah. AC 1 (Grid) Input Current – Selectable. AC 2 (Generator) Input Current – Selectable. AC Input Voltage (Nominal). AC Input Frequency Range. 52 – 68 Hz. 165 lbs/ 75 kg. 169 lbs/ 77 kg. 28.0 x 22.5 x 15.5 in. IP degree of protection. NEMA Type 1 Indoor. Operating air temperature range. 25 °C to 70 °C. UL1741, CSA 107.1 (UL 1741-SA listing for PRO Unit Only). Schneider Electric Conext XW+ Mini Power Distribution Panel For Conext XW+ Inverters. NEW from Schneider Electric – the XW+ Mini PDP! For years, installers have used the standard Conext XW+ Power Distribution Panel for all of their XW+ installations. That product was designed for up to 3 XW+ inverters allowing room for expansion on a single or double inverter system. Now there is a solution for single inverter installations that require the robust form and functions of the XW+, yet help keep costs to a minimum. The XW+ Mini PDP ships with breakers, bus bars, and cables, to install a single XW+ inverter/charger. Single-phase split-phase or three phase systems. Configure to the left or right side of the XW+ inverter/chargers. Multiple field configurable conduit entry points on the back, bottom, top and sides. DIN Rail mounting for QOU type and Multi-9 AC breakers. Breaker configuration allows XW+ inverter/chargers to be AC bypassed for easy servicing. The Conext XW+ Mini Power Distribution Panel includes and comes pre-wired with. Field-reversible panel door and wall mount bracket. Three 60 A, 120/240 Vac, two-pole, Square-D, type QOU260, DIN-rail mounted AC breakers for AC input, bypass and AC load, plus one additional expansion position for two pole AC breaker, type QOU260. One GJ 250A 160 Vdc, 3/8 stud DC breaker installed. Two expansion positions for charge controller DC breakers (PV array or battery). Termination lugs for ground, common and battery connections. Integrated DC busbars for direct connection to XW+ DC terminals. 3/8 hardware for connection of DC cables to busbars. Cable ties for cable management. Plastic knockout bushings for connection between Mini-PDP and XW/XW+ unit. Schneider Electric Conext System Control Panel (for XW+ and SW Series). Conext System Control Panel. (SCP) eliminates the need for separate control panels for each device and gives a single point of control to set up and monitor the entire Conext inverter charger system, including Conext MPPT Solar Charge Controllers. Featuring a graphical backlit liquid crystal display, the SCP selectively displays configuration, status and diagnostic information for all devices connected to the Xanbus network. 1 remote head; 1 network terminal; 1 Cat5 cable; 1 mounting plate; 1 mounting bracket; 4 #8 screws; 2 #6 screws. Monitor and configure Conext XW+, SW, MPPT 60 150, MPPT 80 600, AGS, Battery Monitor. Multiple SCP can be used on the same Xanbus network. Compatible with Conext ComBox. Access and troubleshoot Xanbus enabled devices on the network from one location. Surface mount or panel mount on wall. RJ45 connections for Xanbus network cables. Internal clockkeeps time for the entire system. Audible alarmif enabled, alerts you when a fault condition arises. Low power consumptionautomatically turns off the backlight after a period of inactivity. Non-volatile memorypreserves SCP settings if network power is interrupted or network communication is disrupted. Min Operating Network Voltage. Max Operating Network Voltage. Max Operating Current at Nominal Voltage. 20 to 50C (-4F to 122F). Protocol: Xanbus / Connectors: RJ45. CSA 107.1, UL 458 4th Ed. My solar experience in site surveys, design, installations, and maintenance of 300 plus clients, specializing in off grid homes, and owning my own off grid home. Solar is part of my life and the bonus of meeting so many different clients needs, remains my quest to see more people enjoy their home with solar. I have taken advantage of my suppliers for the last 25 years to give you the best price I possibly can. If you dont find what you need on my site, please tell me what you need, and I will do my best to get it for you. If you are new to solar and need help, feel free to reach out to me. I will be more than happy to design a system for your needs. Contact me at two, zero, seven, – two-eight-zero, – zero, six, two, five. The item “Puerto Rico, Schneider XW6848 Inverter/Charger Package” is in sale since Friday, July 31, 2020. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters”. The seller is “everyonessolar” and is located in Boxborough, Massachusetts. This item can’t be shipped, the buyer must pick up the item.
- Country/Region of Manufacture: Puerto Rico
- MPN: Conext XW Pro
- Brand: Schneider